o-Phenylene-bridged Cp/amido titanium and zirconium complexes and their polymerization reactivity

o-Phenylene-bridged trimethylcyclopentadienyl/amido titanium complexes [(η⁵-2,3,5-Me₃C₅H)C₆H₄NR-κN]TiCl₂ (18, R = CH₃; 19, R = CH₂CH₃; 20, R = CH₂C(CH₃)₃; 21, R = CH₂(C₆H₁₁)) and zirconium complexes {[(η⁵-2,3,5-Me₃C₅H)C₆H₄NR-κN]ZrCl-μCl}₂ (22, R = CH₃; 23, R = CH₂CH₃; 24, R = CH₂C(CH₃)₃; 25, R = CH₂(C₆H₁₁); 26, R = C₆H₁₁; 27, R = CH(CH₂CH₃)₂) are prepared via a key step of the Suzuki-coupling reaction between 2-dihydroxyboryl-3-methyl-2-cyclopenten-1-one (2) and the corresponding bromoaniline compounds. The molecular structures of titanium complexes 18 and 19 and dinuclear zirconium complexes 24 and 26 were confirmed by X-ray crystallography. The Cp(centroid)-Ti-N and Cp(centroid)-Zr-N angles are smaller, respectively, than those observed for the Me₂Si-bridged complex [Me₂Si(η⁵-Me₄C₅)(N^tBu)]TiCl₂ and its Zr-analogue, indicating that the o-phenylene-bridged complexes are more constrained than the Me₂Si-bridged complex. Titanium complex 19 exhibits comparable activity and comonomer incorporation to the CGC ([Me₂Si(η⁵-Me₄C₅)(N^tBu)]TiCl₂) in ethylene/1-octene copolymerization. Complex 19 produces a higher molecular-weight polymer than CGC.     

Synthesis and molecular structures of lanthanocene amide complexes and their catalytic activity for addition of amines to nitriles

Reaction of (CH₃C₅H₄)₂LnCl(THF) with NaNHAr in a 1:1 molar ratio in THF afforded the amide complexes (CH₃C₅H₄)₂LnNHAr(THF) [(Ar = 2,6-Me₂C₆H_3, Ln = Yb (I), Y (III); Ar = 2,6-ⁱPr₂C₆H₃, Ln = Yb (II)]. X-ray crystal structure determination revealed that complexes I-III are isostructural. The central metal in each complex coordinated to two methylcyclopentadienyl groups, one amide group and one oxygen atom from THF to form a distorted tetrahedron. Complexes I-III and a known complex (CH₃C₅H₄)₂YbNⁱPr₂(THF) IV all can serve as the catalysts for addition of amines to nitriles to monosubstituted N-arylamidines. The activity depended on the central metals and amide groups, and the active sequence follows the trend IV ≈ III < I < II.     

Preparation and structures of copper(II) and zinc(II) complexes with 5-ferrocenylpyrimidine: Structural variation derived from flexible coordination ability of the ligand and metal ions

5-Ferrocenylpyrimidine (FcPM) reacts with dinuclear copper(II) carboxylates ([Cu₂(RCOO)₄]; R = C₆H₅, C₅H₁₁, CH₃) to produce one-dimensional coordination polymers [Cu₂(C₆H₅COO)₄(FcPM)]_n (1), [Cu₂(C₅H₁₁COO)₄(FcPM)]_n · nCH₃CN (2), and a discrete tetranuclear complex [Cu₂(CH₃COO)₄(FcPM)₂] (3). Compounds 1 and 2 show similar zigzag chain structures, comprising alternate linking of FcPM and dinuclear copper(II) units, whereas the structure of 3 corresponds to the local structural motifs of 1 and 2. Reaction of FcPM with zinc salts (ZnX₂; X = NO₃, SCN) affords zinc-centered ferrocenyl cluster complexes, [Zn(NO₃)₂(FcPM)₃] (4) and [Zn(SCN)₂(FcPM)₂] · 0.5H₂O (5), with varying M:L ratios. FcPM acts as a bidentate ligand in 1 and 2, and as a monodentate ligand in the others.     

Ethylene polymerization by novel 4,4′-bis(methylene)biphenylene bridged homodinuclear titanocene and zirconocene combined with MAO

4,4′-Bis(methylene)biphenylene bridged homodinuclear titanocene (3) and zirconocene (4) have been synthesized by treatment of CpTiCl₃ and CpZrCl₃ · DME with Na₂[C₅H₄CH₂C₆H₄-p-C₆H₄CH₂C₅H₄], respectively, in THF and characterized by ¹H NMR and element analysis. After activation with methyl aluminoxane (MAO), these catalysts were used for the homogeneous polymerization of ethylene. The influences of reaction conditions, such as temperature, time, catalyst concentration and molar ratio of MAO/Cat. on ethylene polymerization were investigated in detail. The catalytic activities of 3 and 4 are more than three times higher than that of the phenyldimethylene bridged homodinuclear metallocene of titanocene (5) and zirconocene (6), respectively, and also twice higher than that of Cp₂TiCl₂/MAO and Cp₂ZrCl₂/MAO, respectively. However, the catalytic activity of 3 is nearly half as high as that of 4, which reached 1.31 × 10⁶ g PE/mol cat h. The molecular weight of polyethylene increases simultaneously with prolongation of polymerization time. GPC spectra show that 3 and 4 produce polyethylene with broad molecular weight distribution (4.28 and 3.18). The high melting points of the products (131-134 °C) indicate that the polyethylene formed is highly linear and highly crystalline.     

Syntheses, structures and reactivities of diindenyl-coordinated diiron bridging carbene complexes

Compound [Fe₂(μ-CO)₂(CO)₂(η⁵-C₉H₇)₂] (1) reacts with aryllithium reagents, ArLi (Ar = C₆H₅, p-CH₃C₆H₄, p-CF₃C₆H₄) followed by alkylation with Et₃OBF₄ to give the diindenyl-coordinated diiron bridging alkoxycarbene complexes [Fe₂{μ-C(OC₂H₅)Ar}(μ-CO)(CO)₂(η⁵-C₉H₇)₂] (2, Ar = C₆H₅; 3, Ar = p-CH₃C₆H₄, 4, Ar = p-CF₃C₆H₄). Complex 4 reacts with HBF₄ · Et₂O at low temperature to yield cationic bridging carbyne complex [Fe₂(μ-CC₆H₄CF₃-p)(μ-CO)(CO)₂(η⁵-C₉H₇)₂]BF₄ (5). Cationic 5 reacts with NaBH₄ in THF at low temperature to afford diiron bridging arylcarbene complex [Fe₂{μ-C(H)C₆H₄CF₃-p}(μ-CO)(CO)₂(η⁵-C₉H₇)₂] (6). The reaction of 5 with NaSC₆H₄CH₃-p under the similar conditions gave the bridging arylthiocarbene complex [Fe₂{μ-C(C₆H₄CF₃-p)SC₆H₄CH₃-p}(μ-CO)(CO)₂(η⁵-C₉H₇)₂] (7). Complex 5 can also react with carbonylmetal anionic compounds Na[M(CO)₅(CN)] (M = Cr, Mo, W) to produce the diiron bridging aryl(penta-carbonylcyanometal)carbene complexes [Fe₂{μ-C(C₆H₄CF₃-p)NCM(CO)₅}(μ-CO)(CO)₂(η⁵-C₉H₇)₂] (8, M = Cr; 9, M = Mo; 10, M = W). The structures of complexes 4, 6, 7, and 10 have been established by X-ray diffraction studies.     

Synthesis, structures, and catalytic properties for ethylene polymerization of bridged [η,η-C5H4CHPhArO]TiCl2 complexes

A number of bridged half-sandwich titanium complexes [η⁵:η¹-2-C₅H₄CHPh-4-R¹-6-R²C₆H₂O]TiCl₂ [R¹ = H (5), Me (6), ^tBu (7, 8); R² = H (6, 7), ^tBu (5, 8)] were synthesized from the reaction of their corresponding trimethylsilyl substituted ligand precursors 2-Me₃SiC₅H₄CHPh-4-R¹-6-R²C₆H₂OSiMe₃ [R¹ = H (1), Me (2), ^tBu (3, 4); R² = H (2, 3), ^tBu (1, 4)] with TiCl₄ in hexane. All new complexes were characterized by ¹H and ¹³C NMR spectroscopy. Molecular structures of complexes 5 and 8 were determined by single crystal X-ray diffraction analysis. Upon activation with AlⁱBu₃/Ph₃CB (C₆F₅)₄, complexes 5-8 exhibit reasonable catalytic activity for ethylene polymerization and copolymerization with 1-hexene, producing polyethylene and poly(ethylene-co-1-hexene) with moderate molecular weights.     

C-H activation of diphenylphosphinoaryl-derivatives with dimethyltetrakis(trimethylphosphine)iron(II)

Fe(CH₃)₂(PMe₃)₄ reacts with 1-(diphenylphosphino)naphthalene or benzyldiphenylphosphine within 4 h at 20 °C to give the novel metallated methyl iron complexes Fe(CH₃){P(C₆H₅)₂(C₁₀H₆)}(PMe₃)₃ (1) and Fe(CH₃){(C₆H₄)CH₂P(C₆H₅)₂}(PMe₃)₃ (3), respectively, via selective activation of the C-H bond of the pre-chelating ligands. The complexes are thermally unstable releasing metal through a reductive elimination of the aromatic backbone and leading to a C,C-coupling product that is regiospecifically methylated, namely 8-methyl(diphenylphosphino)naphthalene (2). Carbonylation (1 bar, 20 °C, 1 h) of complex 1 effects monosubstitution of a trimethylphosphine ligand trans to the metallated 8-C atom to afford Fe(CH₃){P(C₆H₅)₂(C₁₀H₆)}(CO)(PMe₃)₂ (4). The remaining methyl group in the parent complex 1 reacts with trimethylsilylethyne and tert-butylethyne affording the new complexes 5 and 6 bearing an alkynyl substituent trans to the diphenylphosphino anchoring group. The complexes 1 and 3-6 are diamagnetic and possess octahedral coordination geometry. All novel complexes were fully characterized by spectroscopic methods and by X-ray diffraction.     

New organotin(IV) complexes of nicotinamide, isonicotinamide and some of their novel phosphoric triamide derivatives: Syntheses, spectroscopic study and crystal structures

Three novel phosphoramidate ligands with formula , R = Nicotinamide(nia), R′ = NHC(CH₃)₃(L₁), NH(C₆H₁₁) (L₂); R = isonicotinamide(iso), NH(C₆H₁₁) (L₃) and their new organotin(IV) complexes with formula SnCl₂(CH₃)₂(X)₂, X = L₁ (C₁), L₂ (C₂), L₃ (C₃) plus SnCl₂(CH₃)₂(L₄)₂(C₄), L₄ = isoP(O)[NHC(CH₃)₃]₂, were synthesized and characterized by ¹H, ¹³C, ³¹P,¹¹⁹Sn NMR, IR, UV-Vis spectroscopy and elemental analysis. Two novel complexes of nia and iso with formula SnCl₂(CH₃)₂(X)₂, X = nia (C₅), iso (C₆) were also prepared and all the complexes were spectroscopically studied in comparison to their related ligands and to each other. The crystal structure of complexes C₁, C₃, C₄, and C₅ were determined by X-ray crystallography. -Sn-Cl···H-N- major hydrogen bonds beside other electrostatic interactions produced a three dimensional polymeric cluster in the crystalline lattice of C₁, C₃, C₅ and a two dimensional polymeric chain in C₄. Results showed that coordination of the phosphoramidate ligand (L₄) to Sn in C₄ has been occurred from the nitrogen site of the pyridine ring similar to C_5,C₆ in which there is no PO donor site; however, in C₁ and C₃ the active donor site of corresponding ligands is PO. It seems that in these complexes there is a competition between PO and N_pyridine donor sites and the influential factor which determines the winner site is the type of substituents on phosphorus atom.     

New alkenyl-substituted group 4 C-ansa-metallocene complexes. Reactivity of the substituent at the carbon ansa bridge

The allyl-substituted group 4 metal complexes [M{(R)CH(η⁵-C₅Me₄)(η⁵-C₅H₄)}Cl₂] [M = Ti, R = CH₂CHCH₂, (2); R = CH₂C(CH₃)CH₂ (3); M = Zr, R = CH₂CHCH₂ (4), R = CH₂C(CH₃)CH₂ (5)] have been synthesized by the reaction of allyl ansa-magnesocene derivatives and the tetrachloride salts of the corresponding transition metal. The dialkyl complexes ] [M = Ti, R = CH₂=CHCH₂, R′ = Me (6), R′ = CH₂Ph (7); R = CH₂C(CH₃)CH₂, R′ = Me (8), R′ = CH₂Ph (9); M = Zr, R = CH₂CHCH₂, R′ = Me (10), R′ = CH₂Ph (11); R = CH₂C(CH₃)CH₂, R′ = Me (12), R′ = CH₂Ph (13)] have been synthesized by the reaction of the corresponding ansa-metallocene dichloride complexes 2-5 and two molar equivalents of the alkyl Grignard reagent. Compounds 2-5 reacted with H₂ under catalytic conditions (Wilkinson’s catalyst or Pd/C) to give the hydrogenation products [M{(R)CH(η⁵-C₅Me₄)(η⁵-C₅H₄)}Cl₂] [M = Ti and R = CH₂CH₂CH₃ (14) or R = CH₂CH(CH₃)₂ (15); M = Zr and R = CH₂CH₂CH₃ (16) or R = CH₂CH(CH₃)₂ (17)]. The reactivity of 2-5 has also been tested in hydroboration and hydrosilylation reactions. The hydroboration reactions of 3, 4 and 5 with 9-borabicyclo[3.3.1]nonane (9-BBN) yielded the complexes [M{(9-BBN)CH₂CH(R)CH₂CH(η⁵-C₅Me₄)(η⁵-C₅H₄)}Cl₂] [M = Ti and R = H (18); M = Zr and R = H (19) or R = CH₃ (20)]. The reaction with the silane reagents HSiMe₂Cl gave the corresponding [M{ClMe₂SiCH₂CHRCH₂CH(η⁵-C₅Me₄)(η⁵-C₅H₄)}Cl₂] [M = Ti and R = H (21); M = Zr and R = H (22) or R = CH₃ (23)]. The reaction of 22 with t-BuMe₂SiOH produced a new complex [Zr{t-BuMe₂SiOSi(Me₂)CH₂CH₂CH₂CH(η⁵-C₅Me₄)(η⁵-C₅H₄)}Cl₂] (24) through the formation of Si-O-Si bonds. On the other hand, reactivity studies of some zirconocene complexes were carried out, with the insertion reaction of phenyl isocyanate (PhNCO) into the zirconium-carbon σ-bond of [Zr{(n-Bu)CH(η⁵-C₅Me₄)(η⁵-C₅H₄)}₂Me₂] (25) giving [{(n-Bu)CH(η⁵-C₅Me₄)(η⁵-C₅H₄)]}Zr{Me{κ²-O,N-OC(Me)NPh}] as a mixture of two isomers 26a-b. The reaction of [Zr{(n-Bu)(H)C(η⁵-C₅Me₄)(η⁵-C₅H₄)}(CH₂Ph)₂] (27) with CO also provided a mixture of two isomers [{(n-Bu)CH(η⁵-C₅Me₄)(η⁵-C₅H₄)]}Zr(CH₂Ph){κ²-O,C-COCH₂Ph}] 28a-b. The molecular structures of 4, 11, 16 and 17 have been determined by single-crystal X-ray diffraction studies.     

Synthesis and protonolysis of neutral aluminum dihydride compounds stabilized by tridentate-substituted pyrrolyl ligands: Synthesis, structural characterization and ring-opening polymerization of ?-caprolactone

A series of aluminum compounds containing tridentate pyrrolyl ligands were obtained from related aluminum dihydride compounds via protonolysis. Treatment of tetranuclear aluminum compound [C₄H₂N{2,5-(CH₂NMe₂)₂}Al₂H₅]₂ (1) with two equivalents of [C₄H₃N{2,5-(CH₂NMe₂)₂}] in methylene chloride at 0 °C led to the formation of [C₄H₂N{2,5-(CH₂NMe₂)₂}]AlH₂ (2). Similarly, when the deuterated aluminum compound 1D was used, the corresponding aluminum compound [C₄H₂N{2,5-(CH₂NMe₂)₂}]AlD₂ (2D) could be isolated. The reaction of 2 with one or two equivalents of phenylethyne, triphenylmethanethiol, 2,6-diisopropylaniline, or triphenylsilanol generated mononuclear aluminum compounds [[C₄H₂N{2,5-(CH₂NMe₂)₂}]AlRR′ (3, R = -CCPh, R′ = H; 4, R = R′ = -CCPh; 5, R = -SCPh₃, R′ = H; 6, R = R′ = -SCPh₃; 7, R = -NH(2,6-ⁱPr₂Ph), R′ = H; 8, R = R′ = -NH(2,6-ⁱPr₂Ph); 9, R = -OSiPh₃, R′ = H; 10, R = R′ = -OSiPh₃). Related Al-D compounds of 3, 5, 7 and 9 were also synthesized and corresponding IR spectroscopic data well matched in comparison of the stretching frequencies of Al-H and Al-D. The molecular structures of 2D, 4, 5, 5D, 7, and 10 have been determined by X-ray crystallography. Compounds 2, 5, and 7 initiated the ring-opening polymerization of ?-caprolactone and produced high-molecular weight of poly-?-caprolactone.     

Syntheses and characterization of η-cyclopentadienyl and η-indenyl ruthenium(II) complexes of arylazoimidazoles: The molecular structure of the complex [(η-C5H5)Ru(PPh3)(C6H5-NN-C3H3N2)]

The complex [(η⁵-C₅H₅)Ru(PPh₃)₂Cl] (1) reacts with several arylazoimidazole (RaaiR′) ligands, viz., 2-(phenylazo)imidazole (Phai-H), 1-methyl-2-(phenylazo)imidazole (Phai-Me), 1-ethyl-2-(phenylazo)imidazole (Phai-Et), 2-(tolylazo)imidazole (Tai-H), 1-methyl-2-(tolylazo)imidazole (Tai-Me) and 1-ethyl-2-(tolylazo)imidazole (Tai-Et), gave complexes of the type [(η⁵-C₅H₅)Ru(PPh₃)(RaaiR′)]⁺ {where R, R′ = H (2), R = H, R′ = CH₃ (3), R = H, R′ = C₂H₅ (4), R = CH₃, R′ = H (5), R, R′ = CH₃ (6), R = CH₃, R′ = C₂H₅ (7)}. The complex [(η⁵-C₉H₇)Ru(PPh₃)₂(CH₃CN)]⁺ (8) undergoes reactions with a series of N,N-donor azo ligands in methanol yielding complexes of the type [(η⁵-C₉H₇) Ru(PPh₃)(RaaiR′)]⁺ {where R, R′ = H (9), R = H, R′ = CH₃ (10), R = CH₃, R′ = H (11), R = CH₃, R′ = C₂H₅ (12)}, respectively. These complexes were characterized by FT IR and FT NMR spectroscopy as well as by analytical data. The molecular structure of the complex [(η⁵-C₅H₅)Ru(PPh₃)(C₆H₅-NN-C₃H₃N₂)]⁺ (2) was established by single crystal X-ray diffraction study.     

Titanium complexes with novel triaryl-substituted phosphinimide ligands: Synthesis, structure and ethylene polymerization behavior

A series of titanium phosphinimide complexes [Ph₂P(2-RO-C₆H₄)]₂TiCl₂ (7, R = CH₃; 8, R = CHMe₂) and [PhP(2-Me₂CHO-C₆H₄)][THF]TiCl₃ (9) have been prepared by reaction of TiCl₄ with the corresponding phosphinimines under dehalosilylation. The structure of complex 9 has been determined by X-ray crystallography, and a solvent molecule THF was found to be coordinated with the central metal and the Ti-O bond was consistent with the normal Ti-O (donor) bond length. The complexes 7 and 8 displayed inactive to ethylene polymerization, and the complex 9 displayed moderate activity in the presence of modified methylaluminoxane (MMAO) or i-Bu₃Al/Ph₃CB(C₆F₅)₄, and this should be partly attributed to coordination of THF with titanium and the steric effect of two iso-propoxyl. And catalytic activity up to 32.2 kg-PE/(mol-Ti h bar) was observed.     

Ethylene polymerization by 3-oxa-pentamethylene bridged dinuclear metallocene (Ti, Zr)/MAO systems

Two hetero-atom containing bridged dinuclear metallocene complexes, (CpMCl₂)₂(C₅H₄CH₂CH₂OCH₂CH₂C₅H₄) [M = Ti (1), Zr (2)], have been synthesized by treating the disodium salt of the corresponding ligand (C₅H₅CH₂CH₂)₂O with two equivalents of CpTiCl₃ and CpZrCl₃ · DME, respectively, in THF at 0 °C and characterized by ¹H- and ¹³C-NMR, MS and IR spectroscopy. Homogenous ethylene polymerization by those complexes has been conducted systematically in the presence of methylaluminoxane (MAO). The influences of reaction parameters, such as [MAO]/[Cat] molar ratio, catalyst concentration, ethylene pressure, temperature and time, have been studied in detail. The catalytic activities of the dinuclear complexes 1 and 2 were higher than those of (MeCpTiCl₂)₂(C₅H₄CH₂C₆H₄CH₂C₅H₄) (3), (CpZrCl₂)₂(C₅H₄CH₂C₆H₄CH₂C₅H₄) (4) and the mononuclear metallocenes Cp₂TiCl₂ and Cp₂ZrCl₂, respectively. Complex 2 showed high catalytic activity at high temperature (50-100 °C) and high pressure (6 bar). The molecular weight distributions of polyethylene produced by 1 and 2 (MWD = 2.49 and 5.90) were broader than those using the corresponding mononuclear metallocenes (MWD = 2.05 and 2.15). The melting points of the polyethylene produced ranged from 129 to 133 °C, indicating a high linearity and a high crystallinity.     

The cyclopalladation reaction of 2-phenylaniline revisited

2-Phenylaniline reacted with Pd(OAc)₂ in toluene at room temperature for 24 h in a one-to-one molar ratio and with the system PdCl₂, NaCl and NaOAc in a 1 (2-phenylaniline):1 (PdCl₂):2 (NaCl):1 (NaOAc) molar ratio in methanol at room temperature for one week to give the dinuclear cyclopalladated compounds (μ-X)₂[Pd{κ²-N2′,C1-2-(2′-NH₂C₆H₄)C₆H₄}]₂ [1a (X = OAc) and 1b (X = Cl)] in high yield. Moreover, the reaction between 2-phenylaniline and Pd(OAc)₂ in one-to-one molar ratio in acid acetic at 60 °C for 4 h, followed by a metathesis reaction with LiBr, allowed isolation of the dinuclear cyclopalladated compound (μ-Br)₂[Pd{κ²-N2′,C1-2-(2′-NH₂C₆H₄)C₆H₄}]₂ (1c) in moderate yield. A parallel treatment, but using monodeuterated acetic acid (DOAc) as solvent in the cyclopalladation reaction, allowed isolation of a mixture of compounds 1c, 1c_d1 [Pd{κ²-N2′,C1-2-(2′-NH₂C₆H₄)C₆H₄](μ-Br)₂[Pd{κ²-N2′,C1-2-(2′-NH₂C₆H₄)-3-d-C₆H₃] and 1c_d2 (μ-Br)₂[Pd{κ²-N2′,C1-2-(2′-NH₂C₆H₄)-3-d-C₆H₃}]₂ in moderate yield and with a deuterium content of ca. 60%. 1a and 1b reacted with pyridine and PPh₃ affording the mononuclear cyclopalladated compounds [Pd{κ²-N2′,C1-2-(2′-NH₂C₆H₄)C₆H₄}(X)(L)] [2a (X = OAc, L = py), 2b (X = Cl, L = py), 3a (X = OAc, L = PPh₃) and 3b (X = Cl, L = PPh₃)] in a yield from moderate to high. Furthermore, 1a reacted with Na(acac) · H₂O to give the mononuclear cyclopalladated compound 4 [Pd{κ²-N2′,C1-2-(2′-NH₂C₆H₄)C₆H₄}(acac)] in moderate yield. ¹H NMR studies in CDCl₃ solution of 2a, 2b, 3a, 3b and 4 showed that 2a and 3a presented an intramolecular hydrogen bond between the acetato ligand and the amino group, and were involved in a dynamic equilibrium with water present in the CDCl₃ solvent; and that the enantiomeric molecules of 2b and 4 were in a fast exchange at room temperature, while they were in a slow exchange for 2a, 3a and 3b. The X-ray crystal structures of 3b and 4 were determined. 3b crystallized in the triclinic space group with a = 9.9170(10), b = 10.4750(10), c = 12.0890(10) Å, α = 98.610(10)°, β = 94.034(10)° and γ = 99.000(10)° and 4 in the monoclinic space group P2₁/a with a = 11.5900(10), b = 11.2730(10), c = 12.2150(10) Å, α = 90°, β = 107.6560(10)° and γ = 90°.     

Cationic arene ruthenium complexes containing chelating 1,10-phenanthroline ligands

The monocationic chloro complexes containing chelating 1,10-phenanthroline (phen) ligands [(arene)Ru(N∩N)Cl]⁺ (1: arene = C₆H₆, N∩N = phen; 2: arene = C₆H₆, N∩N = 5-NO₂-phen; 3: arene = p-MeC₆H₄Prⁱ, N∩N = phen; 4: arene = p-MeC₆H₄Prⁱ, N∩N = 5-NO₂-phen; 5: arene = C₆Me₆, N∩N = phen; 6: arene = C₆Me₆, N∩N = 5-NO₂-phen; 7: arene = C₆Me₆, N∩N = 5-NH₂-phen) have been prepared and characterised as the chloride salts. Hydrolysis of these chloro complexes in aqueous solution gave, upon precipitation of silver chloride, the corresponding dicationic aqua complexes [(arene)Ru(N∩N)(OH₂)]²⁺ (8: arene = C₆H₆, N∩N = phen; 9: arene = C₆H₆, N∩N = 5-NO₂-phen; 10: arene = p-MeC₆H₄Prⁱ, N∩N = phen; 11: arene = p-MeC₆H₄Prⁱ, N∩N = 5-NO₂-phen; 12: arene = C₆Me₆, N∩N = phen; 13: arene = C₆Me₆, N∩N = 5-NO₂-phen; 14: arene = C₆Me₆, N∩N = 5-NH₂-phen), which have been isolated and characterised as the tetrafluoroborate salts. The catalytic potential of the aqua complexes 8-14 for transfer hydrogenation reactions in aqueous solution has been studied: complexes 12 and 14 catalyse the reaction of acetophenone with formic acid to give phenylethanol and carbon dioxide with turnover numbers around 200 (80 °C, 7 h). In the case of 12, it was possible to observe the postulated hydrido complex [(C₆Me₆)Ru(phen)H]⁺ (15) in the reaction with sodium borohydride; 15 has been characterised as the tetrafluoroborate salt, the isolated product [15]BF₄, however, being impure. The molecular structures of [(C₆Me₆)Ru(phen)Cl]⁺ (1) and [(C₆Me₆)Ru(phen)(OH₂)]²⁺ (12) have been determined by single-crystal X-ray structure analysis of [1]Cl and [12](BF₄)₂.     

Interaction of copper(II) and palladium(II) with linked 2,2′-dipyridylamine derivatives: Synthetic and structural studies

Interaction of copper(II) salts with 2,2′-dipyridylamine (1), N-cyclohexylmethyl-2,2′-dipyridylamine (2), di-2-pyridylaminomethylbenzene (3), 1,2-bis(di-2-pyridylaminomethyl)-benzene (4), 1,3-bis(di-2-pyridylaminomethyl)benzene (5), 1,4-bis(di-2-pyridylaminomethyl)benzene (6), 1,3,5-tris(di-2-pyridylaminomethyl)benzene (7) and 1,2,4,5-tetrakis(di-2-pyridylaminomethyl)benzene (8) has yielded the following complexes: [Cu(2)(μ-Cl)Cl]₂, [Cu(3)(μ-Cl)Cl]₂ · H₂O, [Cu₂(4)(NO₃)₄], [Cu₂(5)(NO₃)₄] · 2CH₃OH, [Cu₂(6)(CH₃OH)₂(NO₃)₄], [Cu₄(8)](NO₃)₄] · 4H₂O while complexation of palladium(II) with 1, 4, 5 and 6 gave [Pd(1)₂](PF₆)₂ · 2CH₃OH, [Pd₂(4)Cl₄], [Pd₂(4)(OAc)₄], [Pd₂(5)Cl₄], [Pd₂(6)Cl₄] and [Pd₂(6)(OAc)₄] · CH₂Cl₂, respectively. X-ray structures of [Cu(2)(μ-Cl)Cl]₂, [Cu(3)(μ-Cl)Cl]₂ · 2C₂H₅OH, [Cu₂(6)(CH₃OH)₂(NO₃)₄], [Pd(1)₂](PF₆)₂ · 2CH₃OH, [Pd₂(4)(OAc)₄] · 4H₂O and [Pd₂(6)(OAc)₄] · 2CH₂Cl₂ are reported. In part, the inherent flexibility of the respective ligands has resulted in the adoption of a diverse range of coordination geometries and lattice arrangements, with the structures of [Pd₂(4)(OAc)₄] · 4H₂O and [Pd₂(6)(OAc)₄] · 2CH₂Cl₂, incorporating the isomeric ligands 4 and 6, showing some common features. Liquid–liquid (H₂O/CHCl₃) extraction experiments involving copper(II) and 1–3, 5, 7and 8 show that the degree of extraction depends markedly on the number of dpa-subunits (and concomitant lipophilicity) of the ligand employed with the tetrakis-dpa derivative 8 acting as the most efficient extractant of the six ligand systems investigated.     

Syntheses and characterization of η-hexamethylbenzeneruthenium(II)-β-diketone complexes: their reactions with mono- and bidentate neutral ligands

The complex [(η⁶-C₆Me₆)Ru(μ-Cl)Cl]₂1 react with sodium salts of β-diketonato ligands in methanol to afford the oxygen bonded neutral complexes of the type [(η⁶-C₆Me₆)Ru(κ²-O,O′-R¹COCHCOR²)Cl] {R¹, R² = CH₃ (2), CH₃, C₆H₅ (3), C₆H₅ (4), OCH₃ (5), OC₂H₅ (6)}. Complex 4 with AgBF₄ yields the γ-carbon bonded ruthenium dimeric complex 7. Complex 4 also reacts with tertiary phosphines and bridging ligands to yield complexes of the type [(η⁶-C₆Me₆)Ru(κ²-O,O′-C₆H₅COCHCOC₆H₅)(L)]⁺ (L = PPh₃ (8), PMe₂Ph (9)) and [{η⁶-C₆Me₆)Ru(κ²-O,O′-C₆H₅COCHCOC₆H₅)}₂(μ-L)] L = 4,4′-bipyridine (4,4′-bipy) (11), 1,4-dicyanobenzene (DCB) (12) and pyrazine (Pz) (13). Complexes 2-4 react with sodium azide to yield neutral complexes [(η⁶-C₆Me₆)Ru(κ²-O,O′-R¹COCHCOR²)N₃] {R¹, R² = CH₃ (10a), CH₃, C₆H₅ (10b), C₆H₅ (10c). All these complexes were characterized by FT-IR and FT-NMR spectroscopy as well as analytical data. The molecular structures of complexes [(η⁶-C₆Me₆)Ru(κ²-O,O′CH₃COCH-COC₆H₅)Cl] (3) and [(η⁶-C₆Me₆)Ru(κ²-O,O′-C₆H₅COCHCOC₆H₅] (4) were established by single crystal X-ray diffraction studies. The complex 3 crystallizes in the triclinic space group, [a = 7.9517(4), b = 9.0582(4) and c = 14.2373(8) Å, α = 88.442(3)°, β = 76.6.8(3)° and γ = 81.715(3)°. V = 987.17(9) ų, Z = 2]. Complex 4 crystallizes in the monoclinic space group, P2₁/c [a = 7.5894(8), b = 20.708(2) and c = 29.208(3) Å,β = 92.059(3)° V = 4587.5(9) ų, Z = 8].     

Metal β-diketiminates revisited: ansa-CH2-bridged bis(β-diketiminate)s of lithium and aluminium having diverse structures

The metal β-diketiminato ligand-to-metal binding modes are briefly reviewed, with reference particularly to our previous work on metal complexes using the ligands [{N(R¹)C(R²)}₂CH] (R¹ = SiMe₃ = R and R² = Ph; or R¹ = C₆H₃Prⁱ₂-2,6 and R² = Me). The syntheses of the β-diketimines H[{N(R)C(Ar)}₂CH] 1 (Ar = Ph) and 2 (Ar = C₆H₄Me-4) and the ansa-CH₂-bridged bis(β-diketimine)s 3 (Ar = Ph) and 4 (Ar = C₆H₄Me-4) are reported. Thus, from the appropriate compound Li[{N(R)C(Ar)}₂CH] and H₂O, (CH₂Br)₂ or CH₂Br₂ the product was 2, 3 or 4. Compound 1 was prepared from K[{N(R)C(Ph)}₂CH] and (CH₂Br)₂. Each of 3 or 4 with LiBuⁿ surprisingly yielded the bicyclic dilithium compound 5 (Ar = Ph) or 6 (Ar = C₆H₄Me-4) in which each of the β-diketiminato fragments is an N,N′-bridge between the two lithium atoms and the CH₂ moiety joins the two ligands through their central carbon atoms. However, 4 with AlMe₃ yielded the expected ansa-CH₂-bridged-bis[(β-diketiminato)(dimethyl)alane] 7, which was also obtained from 6 and Al(Cl)Me₂. X-ray structures of the known compounds 2 and 3, and of 5, 6 and 7 are presented; the ¹H NMR spectra of 6 in toluene-d₈ show that there is restricted rotation about the NC-C₆H₄Me-4 bond.     

Nickel (II) complexes with β-enaminoketonato chelate ligands: Synthesis, solid-structure characterization and reactivity toward the addition polymerization of norbornene

Based on two β-enaminoketonato ligands [ArNC(CH₃)C(H)C(CF₃)OH] (L₁, Ar = 2,6-Me₂C₆H₃; L₂, Ar = 2,6-i-Pr₂C₆H₃), their mono(β-enaminoketonato)nickel (II) complexes [(ArNC(CH₃)C(H)C(CF₃)O)Ni(Ph)(PPh₃)] (1, Ar = 2,6-Me₂C₆H₃; 3, Ar = 2,6-i-Pr₂C₆H₃) and bis(β-enaminoketonato)nickel (II) complexes [(ArNC(CH₃)C(H)C(CF₃)O)₂Ni] (2, Ar = 2,6-Me₂C₆H₃; 4, Ar = 2,6-i-Pr₂C₆H₃) have been synthesized and characterized. The molecular structures of complex 1, 2 and 4 have been confirmed by single-crystal X-ray analyses. After being activated with methylaluminoxane (MAO) these catalytic precursors 1-4 could polymerize norbornene to afford addition-type polynorbornene (PNB). Interestingly, catalytic activities and PNB productivity were greatly enhanced due to the introduction of strong electron-withdrawing group - trifluoro methyl into the ligands. Catalytic activities, polymer yield, M_w and M_w/M_n of PNB have been investigated under various reaction conditions.     

Cyclopalladation of 3-methoxyimino-2-phenyl-3H-indoles

The direct cyclopalladation of 3-methoxyimino-2-(4-chlorophenyl)-3H-indole (1a) and 3-methoxyimino-2-phenyl-3H-indole (1b) results in the regioselective activation of the ortho σ[C(sp², phenyl)-H] bond affording (μ-OAc)₂[Pd{κ²-C,N-C₆H₃-4R-1-(C₈H₄N-3′-NOMe)}]₂ (2) {R = Cl (2a) or H (2b)} that contain a central “Pd(μ-OAc)₂Pd” core. Compounds 2a and 2b reacted with triphenylphosphine (in a molar ratio PPh₃:2 = 2) giving [Pd{κ²-C,N-C₆H₃-4R-1-(C₈H₄N-3′-NOMe)}(OAc)(PPh₃)] (3) {R = Cl (3a) or H (3b)}. Treatment of 2a or 2b with a slight excess of LiCl in acetone produced the metathesis of the bridging ligands and the formation of (μ-Cl)₂[Pd{κ²-C,N-C₆H₃-4R-1-(C₈H₄N-3′-NOMe)}]₂ (4) {R = Cl (4a) or H (4b)} with a central “Pd(μ-Cl)₂Pd” moiety. The reactions of 4a or 4b with deuterated pyridine (py-d₅) or triphenylphosphine gave the monomeric derivatives [Pd{κ²-C,N-C₆H₃-4R-1-(C₈H₄N-3′-NOMe)}Cl(L)] with R = Cl or H and L = py-d₅ (5) or PPh₃ (6). The crystal structure of 6b·1/2CH₂Cl₂ confirmed the mode of binding of the ligand, the nature of the metallated carbon atom and a trans-arrangement of the phosphine ligand and the heterocyclic nitrogen. Theoretical calculations on the free ligands are also reported and have allowed the rationalization of the regioselectivity of the cyclopalladation process.