Ethylene polymerization by novel phenylenedimethylene bridged homobinuclear titanocene/MAO systems

Reaction of (o, m, p) disodium(phenylenedimethylene)dicyclopentadienide C₆H₄(CH₂C₅H₄Na)₂ with 2 equiv of (MeCp)TiCl₃ yields the phenylenedimethylene bridged binuclear titanocenes complexes [(MeC₅H₄)TiCl₂](C₅H₄CH₂C₆H₄CH₂C₅H₄)[(MeC₅H₄)TiCl₂] (3, 4, 5) in high yield, which were characterized by ¹H NMR and elemental analysis. They were used successfully as efficient catalysts for ethylene polymerization in the presence of methylaluminoxane (MAO). The catalytic activities of 4 and 5 are somewhat higher than that of 3 and the molecular weight distributions (MWD = 4.8-6.2) of the polymers generated from the bimetallic catalytic systems are obviously higher than that obtained by conventional Cp₂TiCl₂.     

Ethylene polymerization by novel 4,4′-bis(methylene)biphenylene bridged homodinuclear titanocene and zirconocene combined with MAO

4,4′-Bis(methylene)biphenylene bridged homodinuclear titanocene (3) and zirconocene (4) have been synthesized by treatment of CpTiCl₃ and CpZrCl₃ · DME with Na₂[C₅H₄CH₂C₆H₄-p-C₆H₄CH₂C₅H₄], respectively, in THF and characterized by ¹H NMR and element analysis. After activation with methyl aluminoxane (MAO), these catalysts were used for the homogeneous polymerization of ethylene. The influences of reaction conditions, such as temperature, time, catalyst concentration and molar ratio of MAO/Cat. on ethylene polymerization were investigated in detail. The catalytic activities of 3 and 4 are more than three times higher than that of the phenyldimethylene bridged homodinuclear metallocene of titanocene (5) and zirconocene (6), respectively, and also twice higher than that of Cp₂TiCl₂/MAO and Cp₂ZrCl₂/MAO, respectively. However, the catalytic activity of 3 is nearly half as high as that of 4, which reached 1.31 × 10⁶ g PE/mol cat h. The molecular weight of polyethylene increases simultaneously with prolongation of polymerization time. GPC spectra show that 3 and 4 produce polyethylene with broad molecular weight distribution (4.28 and 3.18). The high melting points of the products (131-134 °C) indicate that the polyethylene formed is highly linear and highly crystalline.     

Synthesis and molecular structures of lanthanocene amide complexes and their catalytic activity for addition of amines to nitriles

Reaction of (CH₃C₅H₄)₂LnCl(THF) with NaNHAr in a 1:1 molar ratio in THF afforded the amide complexes (CH₃C₅H₄)₂LnNHAr(THF) [(Ar = 2,6-Me₂C₆H_3, Ln = Yb (I), Y (III); Ar = 2,6-ⁱPr₂C₆H₃, Ln = Yb (II)]. X-ray crystal structure determination revealed that complexes I-III are isostructural. The central metal in each complex coordinated to two methylcyclopentadienyl groups, one amide group and one oxygen atom from THF to form a distorted tetrahedron. Complexes I-III and a known complex (CH₃C₅H₄)₂YbNⁱPr₂(THF) IV all can serve as the catalysts for addition of amines to nitriles to monosubstituted N-arylamidines. The activity depended on the central metals and amide groups, and the active sequence follows the trend IV ≈ III < I < II.     

o-Phenylene-bridged Cp/amido titanium and zirconium complexes and their polymerization reactivity

o-Phenylene-bridged trimethylcyclopentadienyl/amido titanium complexes [(η⁵-2,3,5-Me₃C₅H)C₆H₄NR-κN]TiCl₂ (18, R = CH₃; 19, R = CH₂CH₃; 20, R = CH₂C(CH₃)₃; 21, R = CH₂(C₆H₁₁)) and zirconium complexes {[(η⁵-2,3,5-Me₃C₅H)C₆H₄NR-κN]ZrCl-μCl}₂ (22, R = CH₃; 23, R = CH₂CH₃; 24, R = CH₂C(CH₃)₃; 25, R = CH₂(C₆H₁₁); 26, R = C₆H₁₁; 27, R = CH(CH₂CH₃)₂) are prepared via a key step of the Suzuki-coupling reaction between 2-dihydroxyboryl-3-methyl-2-cyclopenten-1-one (2) and the corresponding bromoaniline compounds. The molecular structures of titanium complexes 18 and 19 and dinuclear zirconium complexes 24 and 26 were confirmed by X-ray crystallography. The Cp(centroid)-Ti-N and Cp(centroid)-Zr-N angles are smaller, respectively, than those observed for the Me₂Si-bridged complex [Me₂Si(η⁵-Me₄C₅)(N^tBu)]TiCl₂ and its Zr-analogue, indicating that the o-phenylene-bridged complexes are more constrained than the Me₂Si-bridged complex. Titanium complex 19 exhibits comparable activity and comonomer incorporation to the CGC ([Me₂Si(η⁵-Me₄C₅)(N^tBu)]TiCl₂) in ethylene/1-octene copolymerization. Complex 19 produces a higher molecular-weight polymer than CGC.     

Synthesis and structural characterization of organotin(IV) carboxylates based on different heterocyclic substituents

Six novel organotin(IV) carboxylates have been successfully synthesized, namely, the polymer (C₆H₅)₃Sn(L1)_∞ (1) [HL1 = 4-imidazolyl benzoic acid], the mononuclear (C₆H₅)₃Sn(L2) (2) [HL2 = 4-pyrazolylbenzoic acid], (C₆H₅)₃Sn(L3)·CH₃OH (3) [HL3 = 4-triazolylbenzoic acid] and (C₆H₅)₃Sn(L4) (4) [HL4 = 4-tetrazolyl benzoic acid] and the tetranuclear [(n-Bu₂Sn)₄(L2)₂O₂(OCH₃)₂] (5) and [(n-Bu₂Sn)₄(L3)₂O₂(OCH₃)₂] (6). X-ray diffraction analyses show 1D infinite chain of polymer 1, single molecular structures of isomorphous complexes 2 and 4, single molecule structures of complex 3 containing solvent CH₃OH molecule and similar ladder-type structures of complexes 5 and 6. The photoluminescence of ligands and 1-6 were also measured in the solid state at room temperature.     

C-H activation of diphenylphosphinoaryl-derivatives with dimethyltetrakis(trimethylphosphine)iron(II)

Fe(CH₃)₂(PMe₃)₄ reacts with 1-(diphenylphosphino)naphthalene or benzyldiphenylphosphine within 4 h at 20 °C to give the novel metallated methyl iron complexes Fe(CH₃){P(C₆H₅)₂(C₁₀H₆)}(PMe₃)₃ (1) and Fe(CH₃){(C₆H₄)CH₂P(C₆H₅)₂}(PMe₃)₃ (3), respectively, via selective activation of the C-H bond of the pre-chelating ligands. The complexes are thermally unstable releasing metal through a reductive elimination of the aromatic backbone and leading to a C,C-coupling product that is regiospecifically methylated, namely 8-methyl(diphenylphosphino)naphthalene (2). Carbonylation (1 bar, 20 °C, 1 h) of complex 1 effects monosubstitution of a trimethylphosphine ligand trans to the metallated 8-C atom to afford Fe(CH₃){P(C₆H₅)₂(C₁₀H₆)}(CO)(PMe₃)₂ (4). The remaining methyl group in the parent complex 1 reacts with trimethylsilylethyne and tert-butylethyne affording the new complexes 5 and 6 bearing an alkynyl substituent trans to the diphenylphosphino anchoring group. The complexes 1 and 3-6 are diamagnetic and possess octahedral coordination geometry. All novel complexes were fully characterized by spectroscopic methods and by X-ray diffraction.     

Synthesis and protonolysis of neutral aluminum dihydride compounds stabilized by tridentate-substituted pyrrolyl ligands: Synthesis, structural characterization and ring-opening polymerization of ?-caprolactone

A series of aluminum compounds containing tridentate pyrrolyl ligands were obtained from related aluminum dihydride compounds via protonolysis. Treatment of tetranuclear aluminum compound [C₄H₂N{2,5-(CH₂NMe₂)₂}Al₂H₅]₂ (1) with two equivalents of [C₄H₃N{2,5-(CH₂NMe₂)₂}] in methylene chloride at 0 °C led to the formation of [C₄H₂N{2,5-(CH₂NMe₂)₂}]AlH₂ (2). Similarly, when the deuterated aluminum compound 1D was used, the corresponding aluminum compound [C₄H₂N{2,5-(CH₂NMe₂)₂}]AlD₂ (2D) could be isolated. The reaction of 2 with one or two equivalents of phenylethyne, triphenylmethanethiol, 2,6-diisopropylaniline, or triphenylsilanol generated mononuclear aluminum compounds [[C₄H₂N{2,5-(CH₂NMe₂)₂}]AlRR′ (3, R = -CCPh, R′ = H; 4, R = R′ = -CCPh; 5, R = -SCPh₃, R′ = H; 6, R = R′ = -SCPh₃; 7, R = -NH(2,6-ⁱPr₂Ph), R′ = H; 8, R = R′ = -NH(2,6-ⁱPr₂Ph); 9, R = -OSiPh₃, R′ = H; 10, R = R′ = -OSiPh₃). Related Al-D compounds of 3, 5, 7 and 9 were also synthesized and corresponding IR spectroscopic data well matched in comparison of the stretching frequencies of Al-H and Al-D. The molecular structures of 2D, 4, 5, 5D, 7, and 10 have been determined by X-ray crystallography. Compounds 2, 5, and 7 initiated the ring-opening polymerization of ?-caprolactone and produced high-molecular weight of poly-?-caprolactone.     

Coordination and extraction studies of an unexplored bi-functional ligand,carbamoyl methyl pyrazole (CMPz) with uranium(VI), lanthanum(III) and cerium(III) nitrates

The bi-functional carbamoyl methyl pyrazole ligands, C₅H₇N₂CH₂CONBu₂ (L₁), C₅H₇N₂CH₂CONⁱBu₂ (L₂), C₃H₃N₂CH₂CONBu₂ (L₃), C₃H₃N₂CH₂CONⁱBu₂ (L₄) and C₅H₇N₂CH₂CON(C₈H₁₇)₂ (L₅) were synthesized and characterized by spectroscopic and elemental analysis methods. The selected coordination chemistry of L₁ to L₄ with [UO₂(NO₃)₂ · 6H₂O], [La(NO₃)₃ · 6H₂O] and [Ce(NO₃)₃ · 6H₂O] has been evaluated. Structures for the compounds [UO₂(NO₃)₂ C₅H₇N₂CH₂CONBu₂] (6) [UO₂(NO₃)₂ C₅H₇N₂CH₂CONⁱBu₂] (7) and [Ce(NO₃)₃{C₃H₃N₂CH₂CONⁱBu₂}₂] (11) have been determined by single crystal X-ray diffraction methods. Preliminary extraction studies of the ligand L₅ with U(VI) and Pu(IV) in tracer level showed an appreciable extraction for U(VI) and Pu(IV) up to 10 M HNO₃ but not for Am(III). Thermal studies of the compounds 6 and 7 in air revealed that the ligands can be destroyed completely on incineration.     

Synthesis of novel tri-podal mesogenic alkenes and side-chain polysiloxanes

Low molecular weight tri-podal biphenyl- and benzoate-type mesogens [C₆H₅C₆H₄O(CH₂)₅SiMe₂CH₂CH₂SiMe₂]₃CH (4), [C₁₁H₂₃O(C₆H₄)₂O(CH₂)₅SiMe₂]₃CH (5) and [MeOC₆H₄OC(O)C₆H₄O(CH₂)₅SiMe₂]₃CH (6) (C₆H₄ = 1,4-phenylene) were obtained, from branched silyl substituted methane precursors [CH₂CH(Me)₂Si]₃CH (1) and (HMe₂Si)₃CH (2). The biphenyl-containing ones (4) and (5) were converted into terminal alkenes, which were subsequently hydrosilylated with poly(methylsiloxanes). The polymer derived from (5) exhibited mesomorphic properties. Such systems have the potential to significantly increase the density of liquid crystal rod-like structures in side chains of linear polymers (or dendritic liquid crystal polymers).     

Preparation and structures of copper(II) and zinc(II) complexes with 5-ferrocenylpyrimidine: Structural variation derived from flexible coordination ability of the ligand and metal ions

5-Ferrocenylpyrimidine (FcPM) reacts with dinuclear copper(II) carboxylates ([Cu₂(RCOO)₄]; R = C₆H₅, C₅H₁₁, CH₃) to produce one-dimensional coordination polymers [Cu₂(C₆H₅COO)₄(FcPM)]_n (1), [Cu₂(C₅H₁₁COO)₄(FcPM)]_n · nCH₃CN (2), and a discrete tetranuclear complex [Cu₂(CH₃COO)₄(FcPM)₂] (3). Compounds 1 and 2 show similar zigzag chain structures, comprising alternate linking of FcPM and dinuclear copper(II) units, whereas the structure of 3 corresponds to the local structural motifs of 1 and 2. Reaction of FcPM with zinc salts (ZnX₂; X = NO₃, SCN) affords zinc-centered ferrocenyl cluster complexes, [Zn(NO₃)₂(FcPM)₃] (4) and [Zn(SCN)₂(FcPM)₂] · 0.5H₂O (5), with varying M:L ratios. FcPM acts as a bidentate ligand in 1 and 2, and as a monodentate ligand in the others.     

Syntheses and spectra of chromium-titanium complexes bridged by carboxylate substituted cyclopentadienyl group: The structure of Cp2Ti(CH3){[OC(O)C5H4]Cr(NO)2Cl}

Mono-demethylation of Cp₂Ti(CH₃)₂ in dichloromethane with 1 M equivalent of [η⁵-(C₅H₄COOH)]Cr(CO)₂NO (5), [η⁵-(C₅H₄COOH)]Cr(NO)₂X] (X = Cl 6, X = I 7) and [η⁵-(C₅H₄COOH)]W(CO)₃CH₃ (8) gives Cp₂Ti(CH₃){[OC(O)C₅H₄]Cr(CO)₂NO} (9), Cp₂Ti(CH₃){[OC(O)C₅H₄]Cr(NO)₂Cl} (10), Cp₂Ti(CH₃){[OC(O)C₅H₄]Cr(NO)₂I} (11) and Cp₂Ti(CH₃){[OC(O)C₅H₄]W(CO)₃CH₃} (12), respectively. The structure of 10 has been solved by X-ray diffraction studies. One of the nitrosyl groups is located at the site away from the exocyclic carbonyl carbon of the Cp(Cr) ring with twist angle of 178.1°. All the data reveals that Cp₂Ti(CH₃)- is a strong electron-donating group. The opposite correlation was observed on the chemical shift assignments of C(2)-C(5) in compounds 5-12, using HetCOR NMR spectroscopy, as compared with the NMR data of their ferrocene analogues. The electron density distribution in the cyclopentadienyl ring is discussed on the basis of ¹³C NMR data and those of 10 are compared with the calculations via density functional B3LYP correlation- exchange method.     

Nickel (II) complexes with β-enaminoketonato chelate ligands: Synthesis, solid-structure characterization and reactivity toward the addition polymerization of norbornene

Based on two β-enaminoketonato ligands [ArNC(CH₃)C(H)C(CF₃)OH] (L₁, Ar = 2,6-Me₂C₆H₃; L₂, Ar = 2,6-i-Pr₂C₆H₃), their mono(β-enaminoketonato)nickel (II) complexes [(ArNC(CH₃)C(H)C(CF₃)O)Ni(Ph)(PPh₃)] (1, Ar = 2,6-Me₂C₆H₃; 3, Ar = 2,6-i-Pr₂C₆H₃) and bis(β-enaminoketonato)nickel (II) complexes [(ArNC(CH₃)C(H)C(CF₃)O)₂Ni] (2, Ar = 2,6-Me₂C₆H₃; 4, Ar = 2,6-i-Pr₂C₆H₃) have been synthesized and characterized. The molecular structures of complex 1, 2 and 4 have been confirmed by single-crystal X-ray analyses. After being activated with methylaluminoxane (MAO) these catalytic precursors 1-4 could polymerize norbornene to afford addition-type polynorbornene (PNB). Interestingly, catalytic activities and PNB productivity were greatly enhanced due to the introduction of strong electron-withdrawing group - trifluoro methyl into the ligands. Catalytic activities, polymer yield, M_w and M_w/M_n of PNB have been investigated under various reaction conditions.     

Relationships between Fe NMR, Mössbauer parameters, electrochemical properties and the structures of ferrocenylketimines

A comparative study of the electrochemical properties, ⁵⁷Fe NMR and Mössbauer spectroscopic data of compounds [(η⁵-C₅H₅)Fe{(η⁵-C₅H₄)-C(R¹)N-R²}] {R¹ = H, R² = CH₂-CH₂OH (1a), CH(Me)-CH₂OH (1b), CH₂C₆H₅ (1c), C₆H₄-2Me (1d), C₆H₄-2SMe (1e) or C₆H₄-2OH (1f) and R¹ = C₆H₅, R² = C₆H₄-2Me (2d)} is reported. The X-ray crystal structure of [(η⁵-C₅H₅)Fe{(η⁵-C₅H₄)-CHN-C₆H₄-2OH}] (1f) is also described. Density functional theoretical (DFT) studies of these systems have allowed us to examine the effects induced by the substituents of the “-C(R¹)N-R²” moiety or the aryl rings (in 1d-1f) upon the electronic environment of the iron(II) centre.     

Syntheses and characterization of η-cyclopentadienyl and η-indenyl ruthenium(II) complexes of arylazoimidazoles: The molecular structure of the complex [(η-C5H5)Ru(PPh3)(C6H5-NN-C3H3N2)]

The complex [(η⁵-C₅H₅)Ru(PPh₃)₂Cl] (1) reacts with several arylazoimidazole (RaaiR′) ligands, viz., 2-(phenylazo)imidazole (Phai-H), 1-methyl-2-(phenylazo)imidazole (Phai-Me), 1-ethyl-2-(phenylazo)imidazole (Phai-Et), 2-(tolylazo)imidazole (Tai-H), 1-methyl-2-(tolylazo)imidazole (Tai-Me) and 1-ethyl-2-(tolylazo)imidazole (Tai-Et), gave complexes of the type [(η⁵-C₅H₅)Ru(PPh₃)(RaaiR′)]⁺ {where R, R′ = H (2), R = H, R′ = CH₃ (3), R = H, R′ = C₂H₅ (4), R = CH₃, R′ = H (5), R, R′ = CH₃ (6), R = CH₃, R′ = C₂H₅ (7)}. The complex [(η⁵-C₉H₇)Ru(PPh₃)₂(CH₃CN)]⁺ (8) undergoes reactions with a series of N,N-donor azo ligands in methanol yielding complexes of the type [(η⁵-C₉H₇) Ru(PPh₃)(RaaiR′)]⁺ {where R, R′ = H (9), R = H, R′ = CH₃ (10), R = CH₃, R′ = H (11), R = CH₃, R′ = C₂H₅ (12)}, respectively. These complexes were characterized by FT IR and FT NMR spectroscopy as well as by analytical data. The molecular structure of the complex [(η⁵-C₅H₅)Ru(PPh₃)(C₆H₅-NN-C₃H₃N₂)]⁺ (2) was established by single crystal X-ray diffraction study.     

Interaction of copper(II) and palladium(II) with linked 2,2′-dipyridylamine derivatives: Synthetic and structural studies

Interaction of copper(II) salts with 2,2′-dipyridylamine (1), N-cyclohexylmethyl-2,2′-dipyridylamine (2), di-2-pyridylaminomethylbenzene (3), 1,2-bis(di-2-pyridylaminomethyl)-benzene (4), 1,3-bis(di-2-pyridylaminomethyl)benzene (5), 1,4-bis(di-2-pyridylaminomethyl)benzene (6), 1,3,5-tris(di-2-pyridylaminomethyl)benzene (7) and 1,2,4,5-tetrakis(di-2-pyridylaminomethyl)benzene (8) has yielded the following complexes: [Cu(2)(μ-Cl)Cl]₂, [Cu(3)(μ-Cl)Cl]₂ · H₂O, [Cu₂(4)(NO₃)₄], [Cu₂(5)(NO₃)₄] · 2CH₃OH, [Cu₂(6)(CH₃OH)₂(NO₃)₄], [Cu₄(8)](NO₃)₄] · 4H₂O while complexation of palladium(II) with 1, 4, 5 and 6 gave [Pd(1)₂](PF₆)₂ · 2CH₃OH, [Pd₂(4)Cl₄], [Pd₂(4)(OAc)₄], [Pd₂(5)Cl₄], [Pd₂(6)Cl₄] and [Pd₂(6)(OAc)₄] · CH₂Cl₂, respectively. X-ray structures of [Cu(2)(μ-Cl)Cl]₂, [Cu(3)(μ-Cl)Cl]₂ · 2C₂H₅OH, [Cu₂(6)(CH₃OH)₂(NO₃)₄], [Pd(1)₂](PF₆)₂ · 2CH₃OH, [Pd₂(4)(OAc)₄] · 4H₂O and [Pd₂(6)(OAc)₄] · 2CH₂Cl₂ are reported. In part, the inherent flexibility of the respective ligands has resulted in the adoption of a diverse range of coordination geometries and lattice arrangements, with the structures of [Pd₂(4)(OAc)₄] · 4H₂O and [Pd₂(6)(OAc)₄] · 2CH₂Cl₂, incorporating the isomeric ligands 4 and 6, showing some common features. Liquid–liquid (H₂O/CHCl₃) extraction experiments involving copper(II) and 1–3, 5, 7and 8 show that the degree of extraction depends markedly on the number of dpa-subunits (and concomitant lipophilicity) of the ligand employed with the tetrakis-dpa derivative 8 acting as the most efficient extractant of the six ligand systems investigated.     

New alkenyl-substituted group 4 C-ansa-metallocene complexes. Reactivity of the substituent at the carbon ansa bridge

The allyl-substituted group 4 metal complexes [M{(R)CH(η⁵-C₅Me₄)(η⁵-C₅H₄)}Cl₂] [M = Ti, R = CH₂CHCH₂, (2); R = CH₂C(CH₃)CH₂ (3); M = Zr, R = CH₂CHCH₂ (4), R = CH₂C(CH₃)CH₂ (5)] have been synthesized by the reaction of allyl ansa-magnesocene derivatives and the tetrachloride salts of the corresponding transition metal. The dialkyl complexes ] [M = Ti, R = CH₂=CHCH₂, R′ = Me (6), R′ = CH₂Ph (7); R = CH₂C(CH₃)CH₂, R′ = Me (8), R′ = CH₂Ph (9); M = Zr, R = CH₂CHCH₂, R′ = Me (10), R′ = CH₂Ph (11); R = CH₂C(CH₃)CH₂, R′ = Me (12), R′ = CH₂Ph (13)] have been synthesized by the reaction of the corresponding ansa-metallocene dichloride complexes 2-5 and two molar equivalents of the alkyl Grignard reagent. Compounds 2-5 reacted with H₂ under catalytic conditions (Wilkinson’s catalyst or Pd/C) to give the hydrogenation products [M{(R)CH(η⁵-C₅Me₄)(η⁵-C₅H₄)}Cl₂] [M = Ti and R = CH₂CH₂CH₃ (14) or R = CH₂CH(CH₃)₂ (15); M = Zr and R = CH₂CH₂CH₃ (16) or R = CH₂CH(CH₃)₂ (17)]. The reactivity of 2-5 has also been tested in hydroboration and hydrosilylation reactions. The hydroboration reactions of 3, 4 and 5 with 9-borabicyclo[3.3.1]nonane (9-BBN) yielded the complexes [M{(9-BBN)CH₂CH(R)CH₂CH(η⁵-C₅Me₄)(η⁵-C₅H₄)}Cl₂] [M = Ti and R = H (18); M = Zr and R = H (19) or R = CH₃ (20)]. The reaction with the silane reagents HSiMe₂Cl gave the corresponding [M{ClMe₂SiCH₂CHRCH₂CH(η⁵-C₅Me₄)(η⁵-C₅H₄)}Cl₂] [M = Ti and R = H (21); M = Zr and R = H (22) or R = CH₃ (23)]. The reaction of 22 with t-BuMe₂SiOH produced a new complex [Zr{t-BuMe₂SiOSi(Me₂)CH₂CH₂CH₂CH(η⁵-C₅Me₄)(η⁵-C₅H₄)}Cl₂] (24) through the formation of Si-O-Si bonds. On the other hand, reactivity studies of some zirconocene complexes were carried out, with the insertion reaction of phenyl isocyanate (PhNCO) into the zirconium-carbon σ-bond of [Zr{(n-Bu)CH(η⁵-C₅Me₄)(η⁵-C₅H₄)}₂Me₂] (25) giving [{(n-Bu)CH(η⁵-C₅Me₄)(η⁵-C₅H₄)]}Zr{Me{κ²-O,N-OC(Me)NPh}] as a mixture of two isomers 26a-b. The reaction of [Zr{(n-Bu)(H)C(η⁵-C₅Me₄)(η⁵-C₅H₄)}(CH₂Ph)₂] (27) with CO also provided a mixture of two isomers [{(n-Bu)CH(η⁵-C₅Me₄)(η⁵-C₅H₄)]}Zr(CH₂Ph){κ²-O,C-COCH₂Ph}] 28a-b. The molecular structures of 4, 11, 16 and 17 have been determined by single-crystal X-ray diffraction studies.     

Organometallic SERMs (selective estrogen receptor modulators): Cobaltifens, the (cyclobutadiene)cobalt analogues of hydroxytamoxifen

The McMurry coupling of (tetraphenylcyclobutadiene)cobalt(cyclopentadienyl) ketones, (C₄Ph₄)Co[C₅H₄C(O)R], where R = Me, 3a, or Et, 3b, with a range of substituted benzophenones furnished a series of cobaltifens, organometallic analogues of tamoxifen whereby a phenyl ring has been replaced by an organo-cobalt sandwich moiety. These systems of the general formula (η⁴-C₄Ph₄)Co[η⁵-C₅H₄C(R)C(Ar)Ar′], where R = Me or Et, and Ar = Ar′ = p-C₆H₄X where X is OH, 2a and 2b, OMe, 2c and 2d, OBn, 2e and 2f, or O(CH₂)₂NMe₂, 12a and 12b, and where Ar = C₆H₄OH and Ar′ = C₆H₄O(CH₂)₂NMe₂, 2g and 2h, have been characterised by NMR spectroscopy and/or X-ray crystallography. The effect of 2a and 2b, 2g and 2h, and 12a and 12b on the growth of MCF-7 (hormone-dependent) and MDA-MB-231 (hormone-independent breast cancer cells) was studied. The dihydroxycobaltifens 2a and 2b exhibit a strong estrogenic effect on MCF-7 cells while the aminoalkyl-hydroxycobaltifens, 2g and 2h, were found to be only slightly cytotoxic on MDA-MB-231 cells (IC₅₀ = 27.5 and 17 μM); surprisingly, however, the bis-(dimethylaminoethoxy)cobaltifens, 12a and 12b were shown to be highly cytotoxic towards both cell lines (IC₅₀ = 3.8 and 2.5 μM).     

New organotin(IV) complexes of nicotinamide, isonicotinamide and some of their novel phosphoric triamide derivatives: Syntheses, spectroscopic study and crystal structures

Three novel phosphoramidate ligands with formula , R = Nicotinamide(nia), R′ = NHC(CH₃)₃(L₁), NH(C₆H₁₁) (L₂); R = isonicotinamide(iso), NH(C₆H₁₁) (L₃) and their new organotin(IV) complexes with formula SnCl₂(CH₃)₂(X)₂, X = L₁ (C₁), L₂ (C₂), L₃ (C₃) plus SnCl₂(CH₃)₂(L₄)₂(C₄), L₄ = isoP(O)[NHC(CH₃)₃]₂, were synthesized and characterized by ¹H, ¹³C, ³¹P,¹¹⁹Sn NMR, IR, UV-Vis spectroscopy and elemental analysis. Two novel complexes of nia and iso with formula SnCl₂(CH₃)₂(X)₂, X = nia (C₅), iso (C₆) were also prepared and all the complexes were spectroscopically studied in comparison to their related ligands and to each other. The crystal structure of complexes C₁, C₃, C₄, and C₅ were determined by X-ray crystallography. -Sn-Cl···H-N- major hydrogen bonds beside other electrostatic interactions produced a three dimensional polymeric cluster in the crystalline lattice of C₁, C₃, C₅ and a two dimensional polymeric chain in C₄. Results showed that coordination of the phosphoramidate ligand (L₄) to Sn in C₄ has been occurred from the nitrogen site of the pyridine ring similar to C_5,C₆ in which there is no PO donor site; however, in C₁ and C₃ the active donor site of corresponding ligands is PO. It seems that in these complexes there is a competition between PO and N_pyridine donor sites and the influential factor which determines the winner site is the type of substituents on phosphorus atom.     

Syntheses and structural characterizations of rhenium carbonyl complexes of a bitopic ferrocene-linked bis(pyrazolyl)methane ligand

The reaction between Fe[C₅H₄CH(pz)₂]₂ (pz = pyrazolyl ring) and two equivalents of Re(CO)₅Br in refluxing toluene produces Fe[C₅H₄CH(pz)₂Re(CO)₃Br]₂ (1) in high yield. A similar reaction with a ligand/rhenium ratio of slightly greater than one yields mainly 1 and a low yield of Fe[C₅H₄CH(pz)₂Re(CO)₃Br][C₅H₄CH(pz)₂] (2). The compound H₂C(pz)₂Re(CO)₃Br (3) was prepared by the reaction of H₂C(pz)₂ and Re(CO)₅Br. Compounds 1 and 2 show a reversible oxidation at ca. 0.9 V (Ag/AgCl) that can be assigned to the oxidation of the ferrocene moiety and one irreversible oxidation at ca. 1.4 V assigned to the oxidation of the rhenium metal center. The solid-state structures of 1 · CH₃NO₂, 1 · 2CH₃NO₂, 1 · 2CH₃CN and 2 · 1/2Et₂O · 1/2C₃H₆O have been determined, with 1 · 2CH₃NO₂ and 1 · 2CH₃CN being isomorphous. All four are organized into supramolecular structures by the interactions of the acidic hydrogens of the pyrazolyl and methine groups with either the bromine atoms or carbonyl ligand oxygen atoms, and in 2 the lone pairs on the uncomplexed bis(pyrazolyl)methane units.