Dispersion of T1 and T2 Nuclear Magnetic Resonance Relaxation in Crude Oils

Crude oils, which are complex mixtures of hydrocarbons, can be characterized by nuclear magnetic resonace diffusion and relaxation methods to yield physical properties and chemical compositions. In particular, the field dependence, or dispersion, of T₁ relaxation can be used to investigate the presence and dynamics of asphaltenes, the large molecules primarily responsible for the high viscosity in heavy crudes. However, the T₂ relaxation dispersion of crude oils, which provides additional insight when measured alongside T₁, has yet to be investigated systematically. Here we present the field dependence of T₁‐T₂ correlations of several crude oils with disparate densities. While asphaltene and resin‐containing crude oils exhibit significant T₁ dispersion, minimal T₂ dispersion is seen in all oils. This contrasting behavior between T₁ and T₂ cannot result from random molecular motions, and thus, we attribute our dispersion results to highly correlated molecular dynamics in asphaltene‐containing crude oils.     

Accelerated solvent extraction and pH‐zone‐refining counter‐current chromatographic purification of yunaconitine and 8‐deacetylyunaconitine from Aconitum vilmorinianum Kom

This study aimed to seek an efficient method to extract and purify yunaconitine and 8‐deacetylyunaconitine from Aconitum vilmorinianum Kom. by accelerated solvent extraction combined with pH‐zone‐refining counter‐current chromatography. The major extraction parameters for accelerated solvent extraction were optimized by an orthogonal test design L₉ (3)⁴. Then a separation and purification method was established using pH‐zone‐refining counter‐current chromatography with a two‐phase solvent system composed of petroleum ether/ethyl acetate/methanol/water (5:5:2:8, v/v) with 10 mM triethylamine in the upper phase and 10 mM HCl in the lower phase. From 2 g crude extract, 224 mg of 8‐deacetylyunaconitine (I) and 841 mg of yunaconitine (II) were obtained with a purity of over 98.0%. The chemical structures were identified by ESI‐MS and ¹H and ¹³C NMR spectroscopy.     

Solvatochromism in Binary Solvent Mixtures by Means of a Penta‐tert‐butyl Pyridinium N‐Phenolate Betaine Dye

The solvatochromic behavior of a penta‐tert‐butyl prydinium N‐phenolate betaine dye was studied using UV‐visible spectrophotometry in several binary mixture solvents. The solvent polarity parameter, E_T (1) (kcal. mol^?1) was calculated from the position of the longest‐wavelength intramolecular charge transfer absorption band of this penta‐tert‐butyl betaine dye. For binary solvent mixtures, all plots of E_T (1) versus the mole fraction of a more polar component are nonlinear owing to preferential solvation of the probe by one component of the binary solvent mixture. In the computation of E_T (1) it was assumed that the two solvents mixed interact to form a common structure with an E_T (1) value not always intermediate between those of the two solvents mixed. The results obtained are explained by the strong synergism observed for some of the binary mixtures with strong hydrogen bond donors (HBD) solvents such as alcohols.     

Butyllithium Addition to α‐Chiral Compounds: Solvent Mixture Effects on Diastereofacial Selectivity

Temperature‐dependent selectivity in nucleophilic additions is affected by the solvent. In this context, we investigated the effect on diastereoselectivity of solvent mixtures with respect to pure solvents. Binary systems of THF/hexane and of four different hydrocarbon mixtures were employed in BuLi addition to 2‐phenylpropanal, (2S)‐2‐[(tert‐butyl)dimethylsilyloxy]‐2‐phenylethanal, and (2S)‐2‐[(tert‐butyl)dimethylsilyloxy]‐N‐(trimethylsilyl)propan‐1‐imine. A 5‐mol‐% of THF in hexane affects the isomer ratio by reducing both ΔΔH^≠ and ΔΔS^≠ contributions, and suppresses T_inv. On the contrary, in hydrocarbon binary mixtures, the T_inv is still observed and occurs at a higher temperature than in pure solvents. Studying the dependence of T_inv on the hexane/decane mixture composition, we propose the formation of a peculiar solvation cluster that is unaffected by the composition of the bulk reaction solvent.     

Rational Design of [13C,D14]Tert‐butylbenzene as a Scaffold Structure for Designing Long‐lived Hyperpolarized 13C Probes

Dynamic nuclear polarization (DNP) is a technique to polarize the nuclear spin population. As a result of the hyperpolarization, the NMR sensitivity of the nuclei in molecules can be dramatically enhanced. Recent application of the hyperpolarization technique has led to advances in biochemical and molecular studies. A major problem is the short lifetime of the polarized nuclear spin state. Generally, in solution, the polarized nuclear spin state decays to a thermal spin equilibrium, resulting in loss of the enhanced NMR signal. This decay is correlated directly with the spin‐lattice relaxation time T₁. Here we report [¹³C,D₁₄]tert‐butylbenzene as a new scaffold structure for designing hyperpolarized ¹³C probes. Thanks to the minimized spin‐lattice relaxation (T₁) pathways, its water‐soluble derivative showed a remarkably long ¹³C T₁ value and long retention of the hyperpolarized spin state.     

Long‐Lived Room‐Temperature Near‐IR Phosphorescence of BODIPY in a Visible‐Light‐Harvesting N^C^N PtII–Acetylide Complex with a Directly Metalated BODIPY Chromophore

Room‐temperature long‐lived near‐IR phosphorescence of boron‐dipyrromethene (BODIPY) was observed (λ_em=770 nm, Φ_P=3.5 %, τ_P=128.4 μs). Our molecular‐design strategy is to attach Pt^II coordination centers directly onto the BODIPY π‐core using acetylide bonds, rather than on the periphery of the BODIPY core, thus maximizing the heavy‐atom effect of Pt^II. In this case, the intersystem crossing (ISC) is facilitated and the radiative decay of the T₁ excited state of BODIPY is observed, that is, the phosphorescence of BODIPY. The complex shows strong absorption in the visible range (ε=53800 M ^?1 cm^?1 at 574 nm), which is rare for Pt^II–acetylide complexes. The complex is dual emissive with ³M LCT emission at 660 nm and the ³IL emission at 770 nm. The T₁ excited state of the complex is mainly localized on the BODIPY moiety (i.e. ³IL state, as determined by steady‐state and time‐resolved spectroscopy, 77 K emission spectra, and spin‐density analysis). The strong visible‐light‐harvesting ability and long‐lived T₁ excite state of the complex were used for triplet‐triplet annihilation based upconversion and an upconversion quantum yield of 5.2 % was observed. The overall upconversion capability (η=ε×Φ_UC) of this complex is remarkable considering its strong absorption. The model complex, without the BODIPY moiety, gives no upconversion under the same experimental conditions. Our work paves the way for access to transition‐metal complexes that show strong absorption of visible light and long‐lived ³IL excited states, which are important for applications in photovoltaics, photocatalysis, and upconversions, etc.     

Study of the base‐catalyzed nitrito–nitro isomerization reaction ([(NH3)5Co‐ONO]2+ → [(NH3)5Co‐NO2]2+) in mixed solvents

The base‐catalyzed linkage isomerization of [Co(NH₃)₅‐ONO]²⁺ to the nitro [(NH₃)₅Co‐NO₂]²⁺ form is studied in various isodielectric water–cosolvent mixtures (methanol, ethanol, tert‐butyl alcohol, and 2‐propanol) at 298 K. In all cases, except for methanol–water mixtures, the rate constants increase with the proportion of cosolvent. Medium effects have been rationalized by using a multiparameter regression of solvent parameters which rationalizes the results obtained, including water–methanol mixtures. The experimental data, k₂, in fact, are well correlated through the following equation: where A, B, and G_exc are the acidity parameter, the basicity parameter, and the excess Gibbs free energy of the mixture, respectively. © 2004 Wiley Periodicals, Inc. Int J Chem Kinet 36: 410–415, 2004     

Study of solvent effects on the stability constant and ionic mobility of the dibenzo‐18‐crown‐6 complex with potassium ion by affinity capillary electrophoresis

The effect of solvent on the strength of noncovalent interactions and ionic mobility of the dibenzo‐18‐crown‐6 complex with K⁺ in water/organic solvents was investigated by using affinity capillary electrophoresis. The proportion of organic solvent (methanol, ethanol, propan‐2‐ol, and acetonitrile) in the mixtures ranged from 0 to 100 vol.%. The stability constant, K_KL, and actual ionic mobility of the dibenzo‐18‐crown‐6‐K⁺ complex were determined by the nonlinear regression analysis of the dependence of the effective electrophoretic mobility of dibenzo‐18‐crown‐6 on the concentration of K⁺ (added as KCl) in the background electrolyte (25 mM lithium acetate, pH 5.5, in the above mixed hydro–organic solvents). Competitive interaction of the dibenzo‐18‐crown‐6 with Li⁺ was observed and quantified in mixtures containing more than 60 vol.% of the organic solvent. However, the stability constant of the dibenzo‐18‐crown‐6‐Li⁺ complex was in all cases lower than 0.5 % of K_KL. The log K_KL increased approximately linearly in the range 1.62–4.98 with the increasing molar fraction of organic solvent in the above mixed solvents and with similar slopes for all four organic solvents used in this study. The ionic mobilities of the dibenzo‐18‐crown‐6‐K⁺ complex were in the range (6.1–43.4) × 10^?9 m² V^?1 s^?1.     

Synthesis and UCST‐type phase behavior of polypeptide with alkyl side‐chains in alcohol or ethanol/water solvent mixtures

A series of thermoresponsive polypeptides bearing 1‐butyl, 1‐hexyl, or 1‐dodecyl side‐chains (i.e., 6a ‐ 6c ) were synthesized by copper‐mediated 1,3‐dipolar cycloaddition with high grafting efficiency (>95%) between side‐chain “clickable” polypeptide, namely poly(γ‐4‐(propargoxycarbonyl)benzyl‐_L‐glutamate) ( 5 ) and 1‐azidoalkanes. 5 with different degree of polymerization (DP = 48–86) were prepared from triethylamine initiated ring‐opening polymerization of γ‐4‐(propargoxycarbonyl)benzyl‐_L‐glutamic acid based N‐carboxyanhydride ( 4 ). ¹H NMR, FTIR, and GPC results revealed the successful preparation of the resulting polypeptides. 6a ‐ 6c showed reversible UCST‐type phase behaviors in methanol, ethanol, and ethanol/water solvent mixtures depending on the polymer main‐chain length, alkyl side‐chain length, weight percentage of ethanol (f_w) in the binary solvent, and so forth. FTIR analysis revealed the presence of the van der Waals interaction between the alkyl pendants of polypeptides and alkyl groups of alcoholic solvents. Variable‐temperature UV‐vis spectroscopy revealed that the UCST‐type phase transition temperature (T_pt) increased as polymer main‐chain length or concentration increased. In ethanol/water solvent mixtures, polypeptide with short alkyl pendant (i.e., 1‐butyl group) and short main‐chain length (DP = 41) showed the widest f_w range and T_pts in the range of 61.0–71.1 °C. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3425–3435     

Synthesis of transition‐metal‐ion‐selective poly(N‐isopropylacrylamide) hydrogels by the incorporation of an Aza crown ether

A functionalized cyclam was synthesized by the attachment of a polymerizable acryloyl group to one of the four nitrogens on the cyclam molecule. The polymerization of the functionalized cyclam was performed with N‐isopropylacrylamide and N,N′‐methylene bisacrylamide, and the gels obtained were studied in the presence of different transition‐metal‐ion solutions. There was a drastic difference in the phase‐transition temperature (T_c) of the poly(N‐isopropylacrylamide) (PNIPAAm)/cyclam gel in comparison with the pure PNIPAAm gel. For the described system, a T_c shift of 15 °C was obtained. The presence of functionalized cyclam increased the hydrophilicity and T_c of the aforementioned polymer gels in deionized water (at pH 6) because of the presence of protonated amino moieties. The PNIPAAm/cyclam gels showed a dependence of the swelling behavior on pH. T_c of the pure PNIPAAm gel was weakly influenced by the presence of any transition‐metal ions, such as Cu²⁺, Ni²⁺, Zn²⁺, and Mn²⁺. The addition of Cu²⁺ or Ni²⁺ to the PNIPAAm/cyclam gel reduced T_c of the polymer gel, and a shift of approximately 12 °C was observed. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1594–1602, 2003     

Application of hydrophobically modified water‐soluble polyacrylamide conjugated with poly(oxyethylene)‐co‐poly(oxypropylene) surfactant as emulsifier

Hydrophobically modified polyacrylamide (PAAm) was prepared by grafting PAAm with block copolymer of poly(ethylene oxide) and poly(propylene oxide), PEO‐PPO‐PEO, by melt method in the presence of benzoyl peroxide as initiator. The chemical structure of the graft copolymer was determined by FTIR and ¹HNMR analyses. The surface tension, critical micelle concentration, and surface activities were determined at different temperatures. Surface parameters such as surface excess concentration (Γ_max), the area per molecule at interface (A_min), and the effectiveness of surface tension reduction (Π_CMC) were determined at different temperatures from the adsorption isotherms of the prepared surfactants. The prepared surfactant was tested as emulsifier for water with xylene, cyclohexane, or petroleum crude oil synthetic emulsions. Copyright © 2010 John Wiley & Sons, Ltd.     

Building the “Phosphoindigo” Backbone by Oxidative Coupling of Phosphindolin‐3‐ones with Selenium Dioxide

Oxidative coupling of racemic 1‐ethoxy‐1‐oxophosphindolin‐3‐one ( 1 ) and its 5‐CF₃‐derivative 6 with SeO₂ furnishes 1,1′‐diphosphaindigo derivatives 5 and 7 as bis‐phosphinic esters, i. e. as P^V‐compounds. Like indigo and thioindigo, 5 and 7 exist in the E‐configuration; the crude products of 5 and 7 are mixtures of isomers that are trans‐ and cis‐configurated with respect to the relative orientation of the ester groups oat phosphorus. The structure of the centrosymmetric E‐P(R)P′(S) isomer [(E)‐trans‐isomer] of 5 was determined by X‐ray crystallography. Ester cleavage of 5 , followed by addition of triethylamine to bis‐phosphinic acid 9 (the 1,1,1′,1′‐tetroxide of “phosphoindigo”), furnishes the related bis‐triethylammonium salt 10 as a crystalline hydrate that exhibits an extended hydrogen bonding network.     

Multiple melting behavior of poly(butylene succinate). I. Thermal analysis of melt‐crystallized samples

The multiple melting behavior of poly(butylene succinate) (PBSu) was studied with differential scanning calorimetry (DSC). Three different PBSu resins, with molecular weights of 1.1 × 10⁵, 1.8 × 10⁵, and 2.5 × 10⁵, were cooled from the melt (150 °C) at various cooling rates (CRs) ranging from 0.2 to 50 K min^?1. The peak crystallization temperature (T_c) of the DSC curve in the cooling process decreased almost linearly with the logarithm of the CR. DSC melting curves for the melt‐crystallized samples were obtained at 10 K min^?1. Double endothermic peaks, a high‐temperature peak H and a low‐temperature peak L, and an exothermic peak located between them appeared. Peak L decreased with increasing CR, whereas peak H increased. An endothermic shoulder peak appeared at the lower temperature of peak H. The CR dependence of the peak melting temperatures [T_m(L) and T_m(H)], recrystallization temperature (T_re), and heat of fusion (ΔH) was obtained. Their fitting curves were obtained as functions of log(CR). T_m(L), T_re, and ΔH decreased almost linearly with log(CR), whereas T_m(H) was almost constant. Peak H decreased with the molecular weight, whereas peak L increased. It was suggested that the rate of the recrystallization decreased with the molecular weight. T_m(L), T_m(H), T_re, and T_c for the lowest molecular weight sample were lower than those for the others. In contrast, ΔH for the highest molecular weight sample was lower than that for the others. If the molecular weight dependence of the melting temperature for PBSu is similar to that for polyethylene, the results for the molecular weight dependence of PBSu can be explained. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2411–2420, 2002     

A Nuclear Singlet Lifetime of More than One Hour in Room‐Temperature Solution

Nuclear magnetic resonance (NMR) and magnetic resonance imaging (MRI) are supremely important techniques with numerous applications in almost all branches of science. However, until recently, NMR methodology was limited by the time constant T₁ for the decay of nuclear spin magnetization through contact with the thermal molecular environment. Long‐lived states, which are correlated quantum states of multiple nuclei, have decay time constants that may exceed T₁ by large factors. Here we demonstrate a nuclear long‐lived state comprising two ¹³C nuclei with a lifetime exceeding one hour in room‐temperature solution, which is around 50 times longer than T₁. This behavior is well‐predicted by a combination of quantum theory, molecular dynamics, and quantum chemistry. Such ultra‐long‐lived states are expected to be useful for the transport and application of nuclear hyperpolarization, which leads to NMR and MRI signals enhanced by up to five orders of magnitude.     

Predicting Nitrogen‐Based Families of Compounds: Transition‐Metal Guanidinates TCN3 (T=V,Nb, Ta) and Ortho‐Nitrido Carbonates T′2CN4 (T′=Ti,Zr, Hf)

Due to its unsurpassed capability to engage in various sp hybridizations or orbital mixings, carbon may contribute in expanding solid‐state nitrogen chemistry by allowing for different complex anions, such as the known NCN^2? carbodiimide unit, the so far unknown CN₃^5? guanidinate anion, and the likewise unknown CN₄^8? ortho‐nitrido carbonate (onc) entity. Because the latter two complex anions have never been observed before, we have chemically designed them using first‐principles structural searches, and we here predict the first hydrogen‐free guanidinates TCN₃ (T=V, Nb, Ta) and ortho‐nitrido carbonates T′₂CN₄ (T′=Ti, Zr, Hf) being mechanically stable at normal pressure; the latter should coexist as solid solutions with the stoichiometrically identical nitride carbodiimides and nitride guanidinates. We also suggest favorable exothermic reactions as useful signposts for eventual synthesis, and we trust that the decay of the novel compounds is unlikely due to presumably large kinetic activation barriers (C?N bond breaking) and quite substantial Madelung energies stabilizing the highly charged complex anions. While chemical‐bonding analysis reveals the novel CN₄^8? to be more covalent compared to NCN^2? and CN₃^5? within related compounds, further electronic‐structure data of onc phases hint at their physicochemical potential in terms of photoelectrochemical water splitting and nonlinear optics.     

Kinetics and mechanism of the aminolysis of O‐phenyl 4‐nitrophenyl dithiocarbonate in aqueous ethanol

The reactions of the title substrate (1) with a series of secondary alicyclic amines are subjected to a kinetic investigation in 44 wt% ethanol‐water, at 25.0°C, ionic strength 0.2 M (KCl). Under amine excess over the substrate, pseudo‐first‐order rate coefficients (k_obs) are obtained. Plots of k_obs against [NH], where NH is the free amine, are nonlinear upwards, except the reactions of piperidine, which show linear plots. According to the kinetic results and the analysis of products, a reaction scheme is proposed with two tetrahedral intermediates, one zwitterionic (T^±) and another anionic (T⁻), with a kinetically significant proton transfer from T^± to an amine to yield T⁻ (k₃ step). By nonlinear least‐squares fitting of an equation derived from the scheme to the experimental points, the rate microcoefficients involved in the reactions are determined. Comparison of the kinetics of the title reactions with the linear k_obs vs. [NH] plots found in the same aminolysis of O‐ethyl 4‐nitrophenyl dithiocarbonate (2) in the same solvent shows that the rate coefficient for leaving group expulsion from T^± (k₂) is larger for 2 due to a stronger push by EtO than PhO. The k₃ value is the same for both reactions since both proton transfers are diffusion controlled. Comparison of the title reactions with the same aminolysis of phenyl 4‐nitrophenyl thionocarbonate (3) in water indicates that (i) the k₂ value is larger for the aminolysis of 1 due to the less basic nucleofuge involved and the small solvent effect on k₂, (ii) the k₃ value is smaller for the reactions of 1 due to the more viscous solvent, (iii) the rate coefficient for amine expulsion from T^± (k₋₁) is larger for the aminolysis of 1 than that of 3 due to a solvent effect, and (iv) the value of the rate coefficient for amine attack (k₁) is smaller for the aminolysis of 1 in aqueous ethanol, which can be explained by a predominant solvent effect relative to the electron‐withdrawing effect from the nucleofuge. © 1999 John Wiley & Sons, Inc. Int J Chem Kinet 31: 839–845, 1999     

Preparative isolation of flavonoid compounds from Oroxylum indicum by high‐speed counter‐current chromatography by using ionic liquids as the modifier of two‐phase solvent system

A preparative high‐speed counter‐current chromatography method for isolation and purification of flavonoid compounds from Oroxylum indicum was successfully established by using ionic liquids as the modifier of the two‐phase solvent system. Two flavonoid compounds including baicalein‐7‐O‐diglucoside and baicalein‐7‐O‐glucoside were purified from the crude extract of O. indicum by using ethyl acetate–water–[C₄mim][PF₆] (5:5:0.2, v/v) as two‐phase solvent system. 36.4 mg of baicalein‐7‐O‐diglucoside and 60.5 mg of baicalein‐7‐O‐glucoside were obtained from 120 mg of the crude extract. Their purities were 98.7 and 99.1%, respectively, as determined by HPLC area normalization method. The chemical structures of the isolated compounds were identified by ¹H‐NMR and ¹³C‐NMR.     

Sulfonyl Fluoride‐Based Prosthetic Compounds as Potential 18F Labelling Agents

Nucleophilic incorporation of [¹⁸F]F^? under aqueous conditions holds several advantages in radiopharmaceutical development, especially with the advent of complex biological pharmacophores. Sulfonyl fluorides can be prepared in water at room temperature, yet they have not been assayed as a potential means to ¹⁸F‐labelled biomarkers for PET chemistry. We developed a general route to prepare bifunctional 4‐formyl‐, 3‐formyl‐, 4‐maleimido‐ and 4‐oxylalkynl‐arylsulfonyl [¹⁸F]fluorides from their sulfonyl chloride analogues in 1:1 mixtures of acetonitrile, THF, or tBuOH and Cs[¹⁸F]F/Cs₂CO_3(aq.) in a reaction time of 15 min at room temperature. With the exception of 4‐N‐maleimide‐benzenesulfonyl fluoride ( 3 ), pyridine could be used to simplify radiotracer purification by selectively degrading the precursor without significantly affecting observed yields. The addition of pyridine at the start of [¹⁸F]fluorination (1:1:0.8 tBuOH/Cs₂CO_3(aq.)/pyridine) did not negatively affect yields of 3‐formyl‐2,4,6‐trimethylbenzenesulfonyl [¹⁸F]fluoride ( 2 ) and dramatically improved the yields of 4‐(prop‐2‐ynyloxy)benzenesulfonyl [¹⁸F]fluoride ( 4 ). The N‐arylsulfonyl‐4‐dimethylaminopyridinium derivative of 4 ( 14 ) can be prepared and incorporates ¹⁸F efficiently in solutions of 100 % aqueous Cs₂CO₃ (10 mg mL^?1). As proof‐of‐principle, [¹⁸F] 2 was synthesised in a preparative fashion [88(±8) % decay corrected (n=6) from start‐of‐synthesis] and used to radioactively label an oxyamino‐modified bombesin(6–14) analogue [35(±6) % decay corrected (n=4) from start‐of‐synthesis]. Total preparation time was 105–109 min from start‐of‐synthesis. Although the ¹⁸F‐peptide exhibited evidence of proteolytic defluorination and modification, our study is the first step in developing an aqueous, room temperature ¹⁸F labelling strategy.     

Triplet–Triplet Energy Transfer from a UV‐A Absorber Butylmethoxydibenzoylmethane to UV‐B Absorbers

The phosphorescence decay of a UV‐A absorber, 4‐tert‐butyl‐4′‐methoxydibenzolymethane (BMDBM) has been observed following a 355 nm laser excitation in the absence and presence of UV‐B absorbers, 2‐ethylhexyl 4‐methoxycinnamate (octyl methoxycinnamate, OMC) and octocrylene (OCR) in ethanol at 77 K. The lifetime of the lowest excited triplet (T₁) state of BMDBM is significantly reduced in the presence of OMC and OCR. The observed quenching of BMDBM triplet by OMC and OCR suggests that the intermolecular triplet–triplet energy transfer occurs from BMDBM to OMC and OCR. The T₁ state of OCR is nonphosphorescent or very weakly phosphorescent. However, we have shown that the energy level of the T₁ state of OCR is lower than that of the enol form of BMDBM. Our methodology of energy‐donor phosphorescence decay measurements can be applied to the study of the triplet–triplet energy transfer between UV absorbers even if the energy acceptor is nonphosphorescent. In addition, the delayed fluorescence of BMDBM due to triplet–triplet annihilation was observed in the BMDBM–OMC and BMDBM–OCR mixtures in ethanol at 77 K. Delayed fluorescence is one of the deactivation processes of the excited states of BMDBM under our experimental conditions.     

A re‐examination of the sub‐Tm exotherm in polyamide 6: The roles of thermal history,water and clay

The sub‐T_m exotherms in polyamide 6 (PA6) have been carefully re‐examined by differential scanning calorimetry and X‐ray diffraction, considering the effects of processing and thermal history, addition of water and clay. The results obtained cast doubt on Khanna's proposal that sub‐T_m exotherm in PA6 comes from the release of strain energy absorbed during processing, and suggested that the origin of sub‐T_m exotherm is the γ?α transformation at the premelting temperature, namely, the less thermodynamically stable γ‐form (γ^ns) transforming into the more thermodynamically stable α‐form (α^s). The presence of water or clay in PA6 samples facilitated the formation of γ^ns at corresponding cooling rates, and enhanced the development of sub‐T_m exotherms. During the heating scan of PA6/clay composites, the initial γ^ns can be transformed into more stable (γ^s)^t and α^s at the same time, which can be thought as the origin of their sub‐T_m events. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 2385–2393, 2009