Experimental and computational study of the thermochemistry of the fluoromethylaniline isomers

The standard (po = 0.1 MPa) molar enthalpies of formation in the condensed phase of seven isomers of fluoromethylaniline were derived from the standard molar energies of combustion, in oxygen, to yield CO2(g), N2(g) and HF.10H2O(l), at T = 298.15 K, measured by rotating bomb combustion calorimetry. The standard molar enthalpies of vaporization or sublimation of these compounds, also at T = 298.15 K, were determined using Calvet microcalorimetry, while the enthalpies of fusion of the solid compounds were determined by differential scanning calorimetry. The standard molar enthalpies of formation in the gaseous phase, at T = 298.15 K, were derived from the former two experimental quantities. G3MP2//B3LYP calculations were performed for all possible fluoromethylanilines allowing the estimation of data for the isomers that were not studied experimentally. The Cox scheme was applied with two different approaches for the estimation of the standard molar enthalpies of formation of all the isomers studied, and this led to the conclusion that the literature values for the enthalpies of formation of the meta and para isomers of methylaniline seem to be not reliable. Further G3MP2//B3LYPs calculations on the methylaniline isomers yielded new values for the standard molar enthalpies of formation of the isomers of methylaniline, which have been tested under the Cox scheme, resulting in better estimates.     

Experimental and computational investigation of the thermochemistry of the six isomers of dichloroaniline

The standard (p(o) = 0.1 MPa) molar enthalpies of formation of 2,3-, 2,4-, 2,5-, 2,6-, 3,4- and 3,5-dichloroanilines were derived from the standard molar energies of combustion, in oxygen, to yield CO(2)(g), N(2)(g) and HCl.600H(2)O(l), at T = 298.15 K, measured by rotating bomb combustion calorimetry. The Calvet high-temperature vacuum sublimation technique was used to measure the enthalpies of sublimation of the six isomers. These two thermodynamic parameters yielded the standard molar enthalpies of formation of the six isomers of dichloroaniline, in the gaseous phase, at T = 298.15 K. The gas-phase enthalpies of formation were also estimated by G3MP2B3 calculations, which were further extended to the computation of gas-phase acidities, proton affinities, and ionization enthalpies.     

Experimental and computational investigation of the energetics of the three isomers of monochloroaniline

The standard (p degrees = 0.1 MPa) molar enthalpies of formation of 2-, 3-, and 4-chloroaniline were derived from the standard molar energies of combustion, in oxygen, at T = 298.15 K, measured by rotating bomb combustion calorimetry. The Calvet high-temperature vacuum sublimation technique was used to measure the enthalpies of vaporization or sublimation of the three isomers. These two thermodynamic parameters yielded the standard molar enthalpies of formation of the three isomers of chloroaniline, in the gaseous phase, at T = 298.15 K, as 53.4 +/- 3.1 kJ.mol(-1) for 2-chloroaniline, 53.0 +/- 2.8 kJ.mol(-1) for 3-chloroaniline, and 59.7 +/- 2.3 kJ.mol(-1) for 4-chloroaniline. These values, which correct previously published data, were used to test the computational methodologies used. Therewith, gas-phase acidities, proton affinities, electron donor capacities, and N-H bond dissociation enthalpies were calculated and found to compare well with available experimental data for these parameters.     

Thermochemical and theoretical study of some methyldiazines

The standard (p ⁰ = 0.1 MPa) molar enthalpies of formation for the liquid 2,3-dimethylpyrazine and trimethylpyrazine and the crystalline 2,3-dimethylquinoxaline and tetramethylpyrazine were derived from the standard molar enthalpies of combustion, in oxygen, atT=298.15 K, measured by static-bomb combustion calorimetry. The standard molar enthalpies of vaporization or of sublimation for the same compounds were determined by Calvet microcalorimetry. Ab initio full geometry optimization at the 3-21G and 6-31G^* levels were also performed for all the methylpyrazine isomers. MP2/RHF/3-21G//3-21G and DFT energies were also calculated for all the methylpyrazine isomers, thus allowing us to estimate their isodesmic resonance energies.     

Experimental and computational thermodynamic study of ortho-, meta-, and para-methylbenzamide

The Knudsen mass-loss effusion technique was used to measure the vapour pressures of the three crystalline isomers of methylbenzamide. From the temperature dependence of the vapour pressures, the standard molar enthalpies of sublimation and the enthalpies of the intermolecular hydrogen bonds N−H⋯O were calculated. The temperature and molar enthalpy of fusion of the studied isomers were measured using differential scanning calorimetry. The values of the standard (p^° = 0.1 MPa) molar enthalpy of formation in the crystalline phase, at T = 298.15 K, of the compounds studied were derived from their standard massic energies of combustion measured by static-bomb combustion calorimetry. From the experimental values, the standard molar enthalpies of formation in the gaseous phase, at T = 298.15 K, were calculated and compared with the values estimated by employing computational calculations that were conducted using different quantum chemical methods: G3(MP2), G3, and CBS-QB3. Good agreement between experimental and theoretical results is verified. The aromaticity of the compounds has been evaluated through nucleus independent chemical shifts (NICS) calculations.     

Combined experimental and computational study of the thermochemistry of the fluoroaniline isomers

The standard (p degrees = 0.1 MPa) molar enthalpies of formation in the condensed phase of all the fluoroanilines, with the exception of the 2,3,5-trifluoroaniline compound, were derived from the standard molar energies of combustion in oxygen at T = 298.15 K, measured by rotating bomb combustion calorimetry. Calvet high-temperature vacuum sublimation experiments were performed to measure their enthalpies of vaporization or sublimation. These experiments allowed the determination of the standard molar enthalpies of formation in the gaseous phase and at T = 298.15 K. These values are also compared with estimates based on G3MP2B3 and BP86/6-31+G(d) computations, which have been extended also to the fluoroaniline that was not studied experimentally. The results are in close agreement with a mean deviation of approximately 3 kJ.mol-1. The largest difference between experimental and G3MP2B3 values is found for the pentafluoroaniline (-7.0 kJ.mol-1). For the three monofluoroanilines, the composite approach has been used also to compute gas-phase acidities, electron and proton affinities, ionization enthalpies and N-H bond dissociation enthalpies. The computed values compare well with available experimental results supporting the new computed data.     

Experimental and computational studies on the molecular energetics of chlorobenzophenones

The standard (p degrees = 0.1 MPa) molar enthalpies of formation, Delta(f)H(m)degrees, of crystalline 2-, 3- and 4-chlorobenzophenone and 4,4'-dichlorobenzophenone were derived from the standard molar energies of combustion, Delta(c)U(m)degrees, in oxygen, to yield CO(2)(g), N(2)(g), and HCl x 600H(2)O(l), at T = 298.15 K, measured by rotating bomb combustion calorimetry. The Calvet high-temperature vacuum sublimation technique was used to measure the enthalpy of sublimation, Delta(cr)(g)H(m)degrees, of the compound 2-chlorobenzophenone. For the other three compounds, the standard molar enthalpies of sublimation, at T = 298.15 K were derived by the Clausius-Clapeyron equation, from the temperature dependence of the vapor pressures of these compounds, measured by the Knudsen-effusion technique. From the values of Delta(f)H(m)degrees and Delta(cr)(g)H(m)degrees, the standard molar enthalpies of formation of all the compounds, in the gaseous phase, Delta(f)H(m)degrees (g), at T = 298.15 K, were derived. These values were also calculated by using the B3LYP/6-311+G(2d,2p)//B3LYP/6-31G(d) computational approach.     

Thermochemical study of the ethylpyridine and ethylpyrazine isomers

The standard (p(o) = 0.1 MPa) molar energies of combustion in oxygen, at T = 298.15 K, of four liquids: 2-ethylpyridine, 4-ethylpyridine, ethylpyrazine and 2,3-diethylpyrazine were measured by static bomb calorimetry in an oxygen atmosphere. The values of the standard molar enthalpies of vaporization, at T = 298.15 K, were obtained by Calvet microcalorimetry, allowing the calculation of the standard molar enthalpies of formation of the compounds, in the gas phase, at T= 298.15 K: 2-ethylpyridine (79.4 +/- 2.6) kJ mol(-1); 4-ethylpyridine (81.0 +/- 3.4) kJ mol(-1); ethylpyrazine (146.9 +/- 2.8) kJ mol(-1); and 2,3-diethylpyrazine (80.2 +/- 2.9) kJ mol(-1). The most stable geometries of all ethylpyridine and ethylpyrazine isomers were obtained using the density functional theory with the B3LYP functional and two basis sets: 6-31G* and 6-311G**. These calculations were then used to obtain estimates of the enthalpies of formation of all isomers, including those not experimentally studied, through the use of isodesmic reactions. A discussion of the relationship between structure and energetics of the isomers is also presented.     

Energetic studies of two oxygen heterocyclic compounds Xanthone and tetrahydro-γ-pyrone

The present work reports an experimental thermochemical study supported by state of the art calculations of two heterocyclic compounds containing oxygen in the ring: xanthone and tetrahydro-γ-pyrone. The standard (po = 0.1 MPa) molar enthalpies of formation in the condensed phase, at T = 298.15 K, were derived from the measurements of the standard molar energies of combustion in oxygen atmosphere, using a static bomb calorimeter. The standard molar enthalpies of sublimation or vaporization, at T = 298.15 K, of the title compounds were obtained from Calvet microcalorimetry measurements. These values were used to derive the standard enthalpies of formation of the compounds in the gas-phase at the same temperature, which were compared with estimated data from G3(MP2)//B3LYP computations.     

Thermodynamic and aromaticity studies for the assessment of the halogen⋯cyano interactions on Iodobenzonitrile

The standard (p° = 0.1 MPa) molar enthalpies of formation, in the gaseous phase, of the 2-, 3- and 4-iodobenzonitrile isomers were derived from the combination of the corresponding standard molar enthalpies of formation, in the condensed phase, at T = 298.15 K, and the standard molar enthalpies of sublimation, at the same temperature, calculated respectively from the standard molar energies of combustion in oxygen, measured by rotating-bomb calorimetry, and from the vapour-pressure study of the referred compounds, measured by mass-loss Knudsen effusion technique. The strength of the halogen-halogen and the halogen-cyano intermolecular interactions, in the crystal, are evaluated by the enthalpies and entropies of phase transition of the iodobenzonitrile derived from mass-loss Knudsen technique and differential scanning calorimetry measurements and compared with those reported to fluorobenzonitrile and bromobenzonitrile isomers. The computational calculations complement the experimental work, using different aromaticity criteria (HOMA, NICS, Shannom Aromaticity, PDI and ATI) for the analysis of the electronic behaviour of each iodobenzonitrile isomer.     

Experimental and computational thermochemical study of barbituric acids: structure-energy relationship in 1,3-dimethylbarbituric acid

This paper reports an experimental and computational thermochemical study on 1,3-dimethylbarbituric acid. The value of the standard (p° = 0.1 MPa) molar enthalpy of formation in the gas phase at T = 298.15 K has been determined. The energy of combustion was measured by static bomb combustion calorimetry, and from the result obtained, the standard molar enthalpy of formation in the crystalline state at T = 298.15 K was calculated as -639.6 ± 1.9 kJ·mol(-1). The enthalpy of sublimation was determined using a transference (transpiration) method in a saturated N(2) stream and a value of the enthalpy of sublimation at T = 298.15 K was derived as 92.3 ± 0.6 kJ·mol(-1). From these results a value of -547.3 ± 2.0 kJ·mol(-1) for the gas-phase enthalpy of formation at T = 298.15 K was determined. Theoretical calculations at the G3 and G4 levels were performed, and a study on molecular and electronic structure of the compound has been carried out. Calculated enthalpies of formation are in very good agreement with the experimental value.     

Experimental and computational thermochemical study of 2-thiobarbituric acid: structure-energy relationship

This paper reports an experimental and computational thermochemical study on 2-thiobarbituric acid (2-thioxodihydropyrimidine-4,6(1H,5H)-dione), [CAS 504-17-6]. The value of the standard (p(0) = 0.1 MPa) molar enthalpy of formation in the gas phase at T = 298.15 K has been determined. The energy of combustion was measured by bomb combustion calorimetry, using a rotatory bomb, and from the result obtained, the standard molar enthalpy of formation in the crystalline state at T = 298.15 K was calculated as -(396.8 ± 0.9) kJ·mol(-1). The enthalpy of sublimation was determined using a transference (transpiration) method in a saturated N(2) stream and a value of the enthalpy of sublimation at T = 298.15 K was derived as (118.3 ± 2.2) kJ·mol(-1). From these results a value of -(278.5 ± 2.4) kJ·mol(-1) for the gas-phase enthalpy of formation at T = 298.15 K was determined. Theoretical calculations at the G3 and G4 levels were performed, and a study of the molecular and electronic structure of the compound has been carried out. Calculated enthalpies of formation are in very good agreement with the experimental value.     

Comparative computational and experimental study on the thermochemistry of the chloropyrimidines

The standard (p0 = 0.1 MPa) molar enthalpies of formation, Delta fH(0)(M), for liquid 2,4,6-trichloropyrimidine and for crystalline 2-chloropyrimidine, 2,4- and 4,6-dichloropyrimidine, and 2,4,5,6-tetrachloropyrimidine compounds were determined at T = 298.15 K by rotating-bomb combustion calorimetry. The standard molar enthalpies of vaporization or sublimation, Delta (g)(cr,l) H(0)(M), of these compounds at T = 298.15 K were determined by Calvet microcalorimetry. The experimental standard molar enthalpies of formation of those compounds, in the gaseous state, at T = 298.15 K, were thus obtained by combining these two sets of results. The latter values have been employed in the calibration of the computational procedure, which has been used to estimate the gas-phase enthalpies of formation for the other chloropyrimidines that were not possible to obtain in a pure form for the experimental study. It is found that the exchange-correlation functional based on the local spin density approximation (LSDA) seems to be a cheap choice for the estimation of enthalpies of formation for heterocycles containing nitrogen atoms; the well-known B3LYP hybrid method yields larger differences, with respect to the experimental values, for 2,4,6-tri- and 2,4,5,6-tetrachloropyrimidines.     

Thermodynamic study of sesamol, piperonyl alcohol, piperonylic acid and homopiperonylic acid: a combined experimental and theoretical investigation

The standard (p(o)= 0.1 MPa) molar energies of combustion in oxygen, at T= 298.15 K, of four 1,3-benzodioxole derivatives (sesamol, piperonyl alcohol, piperonylic acid and homopiperonylic acid) were measured by static bomb calorimetry. The values of the standard molar enthalpies of sublimation, at T= 298.15 K, were derived from vapour pressure-temperature measurements using the Knudsen effusion technique. Combining these results the standard molar enthalpies of formation of the compounds, in the gas phase, at T= 298.15 K, have been calculated: sesamol (-325.7 +/- 1.9) kJ mol(-1); piperonyl alcohol (-329.0 +/- 2.0) kJ mol(-1); piperonylic acid (-528.9 +/- 2.6) kJ mol(-1) and homopiperonylic acid (-544.5 +/- 2.9) kJ mol(-1). The most stable geometries of all the compounds were obtained using the density functional theory with the B3LYP functional and two basis sets: 6-31G** and 6-311G**. The nonplanarity of the molecules was analyzed in terms of the anomeric effect, which is believed to arise from the interaction between a nonbonded oxygen p orbital and the empty orbital sigma*(CO) involving the other oxygen atom. Calculations were performed to obtain estimates of the enthalpies of formation of all the benzodioxoles using appropriate isodesmic reactions. There is a perfect agreement between theoretical and experimental results.     

Substituent effects on the energetics and aromaticity of aminomethylbenzoic acids

The standard (p0 = 0.1 MPa) molar enthalpies of combustion of six aminomethylbenzoic acids were measured at T = 298.15 K by static bomb calorimetry. With these values, the standard molar enthalpies of formation in the crystalline state were obtained. Combining these results with the standard molar enthalpies of sublimation, the standard molar enthalpies of formation in the gaseous phase were derived. For the 10 possible isomers, the obtained experimental results were compared to and correlated with the relative stability obtained by ab initio calculations at the B3LYP/6-311++G(d,p) level of theory. Seeking a better understanding of the aromatic behavior and energetics of aminomethylbenzoic acids in the gas phase, calculations of NICS values, HOMA indices, and dihedral angles between the aromatic carbon and the amino group, Phi(Ar-NHH), were also performed computationally. The significant differences observed in the energetics, as well as in the NICS values, HOMA indices, and Phi(Ar-NHH) dihedral angles for these 10 isomers suggest a strong dependency on the identity and relative position of the three substituents on the benzene ring. This study points out a marked tendency for a decrease of the ring aromaticity, accompanied by an increase in the respective system stability, as the conjugation between the substituents becomes more extensive.     

Experimental thermochemical study of two polymethylpyrazine N,N′-dioxide derivatives

The standard (p° = 0.1 MPa) molar enthalpies of formation of crystalline 2,3,5-trimethylpyrazine-1,4-dioxide and 2,3,5,6-tetramethylpyrazine-1,4-dioxide were measured, at T = 298.15 K, by static bomb calorimetry and the standard molar enthalpies of sublimation, at T = 298.15 K, were obtained from Calvet microcalorimetric measurements. These values were used to derive the respective standard molar enthalpies of formation in gaseous phase. The mean N–O bond dissociation enthalpy has been calculated for both compounds.     

Calorimetric and computational study of indanones

Condensed phase standard (p degrees = 0.1 MPa) molar enthalpies of formation for 1-indanone, 2-indanone, and 1,3-indandione were derived from the standard molar enthalpies of combustion, in oxygen, at T = 298.15 K, measured by static bomb combustion calorimetry. The standard molar enthalpies of sublimation for 1-indanone and 2-indanone, at T = 298.15 K, were measured both by correlation-gas chromatography and by Calvet microcalorimetry leading to a mean value for each compound. For 1,3-indandione, the standard molar enthalpy of sublimation was derived from the vapor pressure dependence on temperature. The following enthalpies of formation in gas phase, at T = 298.15 K, were then derived: 1-indanone, -64.0 +/- 3.8 kJ mol(-1); 2-indanone, -56.6 +/- 4.8 kJ mol(-1); 1,3-indandione, -165.0 +/- 2.6 kJ mol(-1). The vaporization and fusion enthalpies of the indanones studied are also reported. In addition, theoretical calculations using the density functional theory with the B3LYP and MPW1B95 energy functionals and the 6-311G** and cc-pVTZ basis sets have been performed for these molecules and the corresponding one-ring species to obtain the most stable geometries and to access their energetic stabilities.     

The enthalpies of formation of two dibenzocyclooctadienones

The standard molar enthalpies of formation (Δ_fH_m⁰(s)/kJmol⁻¹) for 2,3:6,7-dibenzocycloocta-2,6-dien-1-one and 2,3:7,8-dibenzocycloocta-2,7-dien-1-one [6H-11,12-dihydro-dibenzo[a,e]cycloocten-5-one (ketone 1) and 10H-11,12-dihydrodibenzo[a,d]-cycloocten-5-one (ketone 2), respectively] were derived from enthalpies of combustion, measured by means of a microbomb calorimeter. The fusion and vaporization enthalpies of these compounds were obtained from DSC and correlation gas chromatography measurements. The standard molar enthalpies of formation in the gas phase were calculated by combining the condensed phase standard molar enthalpies of formation with the fusion and vaporization enthalpies adjusted to 298.15 K. Values for Δ_fH_m⁰(g) of (−39.9±5.5) and (−14.8±5.3) kJ mol⁻¹ were obtained for 2,3:6,7-dibenzocycloocta-2,6-dien-1-one and 2,3:7,8-dibenzocycloocta-2,7-dien-1-one, respectively. Quantum chemical calculations are reported for the compounds investigated experimentally and an additional four isomers. Isomerization enthalpies are derived from computed energies. The enthalpies of formation are also calculated by group additivity, compared with the experimental values and then correlated with the structure of the molecules investigated. The X-ray analysis of ketone 1 is also reported.     

A calorimetric and computational study of the thermochemistry of halogenated 1-phenylpyrrole derivatives

The standard molar enthalpies of formation, in the crystalline phase, of three halogenated 1-phenylpyrrole derivatives, namely 1-(4-fluorophenyl)pyrrole, 1-(4-chlorophenyl)pyrrole, and 1-(4-iodophenyl)pyrrole were derived from the respective enthalpies of combustion, measured by rotating-bomb combustion calorimetry. Their enthalpies of sublimation, at T = 298.15 K, were obtained from the Knudsen mass-loss effusion technique. From these two experimental parameters, the standard molar enthalpies of formation, in the gaseous phase, at T = 298.15 K, of 1-(4-fluorophenyl)pyrrole, 1-(4-chlorophenyl)pyrrole, and 1-(4-iodophenyl)pyrrole were calculated, respectively, as (26.2 ± 2.4) kJ · mol⁻¹, (196.2 ± 2.5) kJ · mol⁻¹, and (311.5 ± 2.4) kJ · mol⁻¹.The gas-phase enthalpies of formation of both fluorine and chlorine compounds were estimated by G3(MP2)//B3LYP computations. For the iodine compound, the B3LYP/6-311G(d):ECP46MDF approach was employed. Additionally, the DFT calculations were extended to estimate the enthalpy of formation of the bromine derivative, 1-(4-bromophenyl)pyrrole, performed at the B3LYP/6-311G(d) level of theory.     

Calorimetric and computational thermochemical study of 3,3-tetramethyleneglutaric acid, 3,3-tetramethyleneglutaric anhydride, and 3,3-tetramethyleneglutarimide

The standard (p(o) = 0.1 MPa) molar energies of combustion in oxygen, at T = 298.15 K, of solid 3,3-tetramethyleneglutaric acid and the related 3,3-tetramethyleneglutaric anhydride and 3,3-tetramethyleneglutarimide were measured by static bomb combustion calorimetry. The values of the standard molar enthalpies of sublimation, at T = 298.15 K, were obtained by Calvet microcalorimetry, allowing the calculation of the standard molar enthalpies of formation of the compounds, in the gaseous state, at T = 298.15 K. The geometries of the experimentally studied compounds were fully optimized using density functional theory with the B3LYP functional and extended basis sets. More accurate energies were also obtained from single-point calculations at the most stable B3LYP/6-311G** geometries, using the cc-pVTZ basis set. From these calculations the standard molar enthalpies of formation of 3,3-tetramethyleneglutaric acid, 3,3-tetramethyleneglutaric anhydride, and 3,3-tetramethyleneglutarimide were estimated using isodesmic reactions involving glutaric acid, glutaric anhydride, and glutarimide, respectively. Experimental and computational results were used in the discussion of the interrelation of energetics and structure in these compounds and compared with other structurally related compounds.