The structures of Langmuir-Blodgett films of fatty acids and their salts

Recent advances in several experimental techniques have enabled detailed structural information to be obtained for floating (Langmuir) monolayers and Langmuir-Blodgett films. These techniques are described briefly and their application to the study of films of fatty acids and their salts is discussed. Floating monolayers on aqueous subphases have been shown to possess a complex polymorphism with phases whose structures may be compared to those of smectic mesophases. However, only those phases that exist at high surface pressures are normally used in Langmuir-Blodgett (LB) deposition. In single LB monolayers of fatty acids and fatty acid salts the acyl chains are in the all-trans conformation with their long axes normal to the substrate. The in-plane molecular packing is hexagonal with long-range bond orientational order and short-range positional order: known as the hexatic-B structure. This structure is found irrespective of the phase of the parent floating monolayer. The structures of multilayer LB films are similar to the structures of their bulk crystals, consisting of stacked bilayer lamellae. Each lamella is formed from two monolayers of fatty acid molecules or ions arranged head to head and held together by hydrogen bonding between pairs of acids or ionic bonding through the divalent cations. With acids the acyl chains are tilted with respect to the substrate normal and have a monoclinic structure, whereas the salts with divalent cations may have the chains normal to the substrate or tilted. The in-plane structures are usually centred rectangular with the chains in the trans conformation and packed in a herringbone pattern. Multilayer films of the acids show only a single-step order-disorder transition at the melting point. This temperature tends to rise as the number of layers increases. Complex changes occur when multilayer films of the salts are heated. Disorder of the chains begins at low temperatures but the arrangement of the head groups does not alter until the melting temperature is reached. Slow heating to a temperature just below the melting temperature gives, with some salts, a radical change in phase. The lamellar structure disappears and a new phase consisting of cylindrical rods lying parallel to the substrate surface and stacked in a hexagonal pattern is formed. In each rod the cations are aligned along the central axis surrounded by the disordered acyl chains.     

Development of fluorescent film sensors for the detection of divalent copper

Monolayers of several peptide lipids at air-water and air-solid interfaces were prepared using Langmuir and Langmuir-Blodgett (LB) film techniques, and tested as fluorescent sensors for copper ions in aqueous phase. In one method, both the ionophore and the fluorophore were in the same molecule (lipid A), so intramolecular interaction was responsible for the fluorescence quenching of monolayers of this lipid. In the other method, ionophore and fluorophore were located on two different molecules (lipids B and C) so the intramolecular coupling does not exist; instead the fluorescence quenching was realized by a through-space interaction mechanism. Several experimental techniques, including pi-A isotherm, epifluorescence microscopy, and absorption and emission spectroscopies were used to study the different characteristics of copper ion effect on the properties of the lipid monolayers. Additionally, the fluorescence quenching properties of the Langmuir monolayers were found to be transferred to the one-layer LB films. On LB films, the fluorescence response presented a clear selectivity for copper ions in comparison with several other transition metal ions. Further, an excellent reversibility was observed: the fluorescence was switched OFF by immersing the solid substrate in copper ion solution and ON by washing with HCl solution. The intermolecular approach used here seems to be a very flexible and general method to design surface-oriented fluorescent sensors to meet different analytic purposes.     

Molecular recognition of cytosine- and guanine-functionalized nucleolipids in the mixed monolayers at the air-water interface and Langmuir-Blodgett films

Molecular recognition of mixed nucleolipids of 1-(2-octadecyloxycarbonylethyl)cytosine and 7-(2-octadecyloxycarbonylethyl)guanine in the monolayers at the air-water interface and Langmuir-Blodgett (LB) films has been investigated in detail using surface pressure/potential-area isotherms, infrared reflection-absorption spectroscopy (IRRAS), and Fourier transform infrared (FTIR) transmission spectroscopy, respectively. Prior to molecular recognition, the cytosine moieties in the monolayer were hydrogen bonded with an almost flat-on orientation, the alkyl chains were uniaxially oriented with respect to the film normal, the guanine moieties in the monolayer were stacked probably through pi-pi interaction with an end-on orientation, and the C-C-C planes of the alkyl chains were preferentially oriented parallel to the water surface. In the monolayer of equimolar mixture, molecular recognition between the cytosine and guanine moieties occurred together with the ring planes of base pairing and the C-C-C planes of the alkyl chains favorably oriented parallel to the water surface. The guanine moieties underwent an orientation change from an end-on mode before molecular recognition to a flat-on one after molecular recognition. The base pairing between the cytosine and guanine moieties in the monolayers was achieved since the N7-substituted guanine derivatives suppressed the formation of guanine tetramers. Both the IRRAS spectra of the monolayers and the FTIR spectra of the LB films presented the exact sites in the cytosine and guanine moieties for the formation of triple hydrogen bonds. The base pairing resulted in a change in molecular orientation and interaction, and the corresponding LB film exhibited a different phase transition behavior from a typical crystal transition for the cytosine-functionalized nucleolipids and an analogous glass transition for the guanine-functionalized nucleolipids. The thermal stability of the mixed LB film was improved in comparison to the LB films of pure components.     

Langmuir膜及LB膜中的金属参与

本文主要介绍了金属离子与Langmuir膜及LB膜相互作用中静电、配位等作用方式及其对膜相态和分子二维排列的影响。在此基础上探讨了Langmuir膜对金属离子的识别与传感。以Langmuir膜和LB膜为二维模板诱导无机盐定向生长作为金属/单分子膜结合的重要应用在文中也进行了讨论。通过举例展示了金属离子参与的Langmuir膜和LB膜催化有机反应的特点。最后对金属参与的Langmuir膜和LB膜在功能化和器件化等方面的研究也作了论述， 并通过介绍金属螯合类脂分子的Langmuir膜在蛋白质等生物大分子界面定向聚集研究中的应用表明了金属参与的Langmuir膜及LB 膜在生命科学研究中的意义。全文贯穿了金属结合调节Langmuir膜和LB膜组装结构以及通过金属结合导入功能基团进行有序组装的思想。     

Micro- and nanopatterned copper structures using directed self-assembly on templates fabricated from phase-separated mixed Langmuir-Blodgett films

We report a versatile method to confine metal thin films in micro- and nanopatterns using directed self-assembly on the templates fabricated from phase-separated mixed Langmuir-Blodgett (LB) films. The pattern of the mixed LB films can be tuned by adjusting intermolecular interaction between the film-forming molecules in the LB films and by varying the fabrication conditions of the films such as the mixing ratio, subphase temperature, and surface pressure. We use the patterned LB films for templates to confine metal in patterned regions, taking advantage of the difference between the surface free energy of the patterned regions and that of the self-assembled monolayer of the silane coupling agent. Au nanoparticles are confined onto the patterned films as a catalyst for the succeeding Cu electroless deposition. The atomic force microscopic images, Auger electron spectra, and scanning Auger electron maps of a Cu-deposited film show that Cu is selectively deposited on the patterns of phase separation of the original mixed LB films.     

Equilibrium structure and dynamics of (2R, 3R)-(+)-bis(decyloxy)succinic acid at the air-water interface

A twin-tailed, twin-chiral fatty acid, (2R,3R)-(+)-bis(decyloxy)succinic acid was synthesized and its two dimensional behavior at the air-water interface was examined. The pH of the subphase had a profound effect on the monolayer formation. On acidic subphase, stable monolayers with increased area per molecule due to hydrogen bonding and bilayers at collapse pressures were observed. Highly compressible films were formed at 40 degrees C, while stable monolayers with increased area were observed at sub-room temperatures. Langmuir monolayers formed on subphases containing 1 mM ZnCl2 and CaCl2 revealed two dimensional metal complex formation with Zn2+ forming a chelate-type complex, while Ca2+ formed an ionic-type complex. Monolayers transferred from the condensed phase onto hydrophilic Si(100) and quartz substrates revealed the formation of bilayers through transfer-induced monolayer buckling. Compression induced crystallites in 2D from monolayers and vesicle-like supramolecular structures from multilayers were the noted LB film characteristics, adopting optical imaging and electron microscopy. The interfacial monolayer structure studied through molecular dynamics simulation revealed the order and packing at a molecular level; monolayers adsorbed at various simulated specific areas of the molecule corroborated the (pi-A) isotherm and the formation of a hexagonal lattice at the air-water interface.     

Surface enhanced resonance Raman scattering imaging of Langmuir-Blodgett monolayers of bis (benzimidazo) thioperylene.

The synthesis, spectroscopic characterization and surface-enhanced spectroscopy of a new electro active organic material bis (benzimidazo) thioperylene (Monothio BZP) are reported. Langmuir monolayers of Monothio BZP were successfully formed on water subphase and characterized by the pi-A surface-pressure area isotherm. Langmuir-Blodgett (LB) monomolecular layers of Monothio BZP were fabricated onto glass substrates and onto silver island films for surface-enhanced spectroscopic studies. The results of surface-enhanced resonance Raman scattering (SERRS), SERRS imaging and surface-enhanced fluorescence (SEF) studies for Monothio BZP LB monolayers are reported. Raman imaging (global imaging and point-by-point mapping) of the SERRS signal for a single monomolecular layer on silver islands were obtained using the 514.5 nm laser line. The SERRS imaging permits a visualization of the variation of the SERRS intensity across of the rough metal surface. The SEF was recorded for the excimer emission of aggregates in the LB film. The distance dependence and the enhancement factor of SEF were determined using fatty acid spacing layers. A temperature dependence study of the LB monolayer SERRS and SEF spectra was carried out between -190 degrees and + 200 degrees C confirming the thermal stability of the LB monolayer on silver. The specificity and the sensitivity of SERRS signal on metal island films was probed using mixed LB films with 0.01% molecular ratio of Monothio BZP in Arachidic Acid (AA). The micro-Raman SERRS spectra from ca. 10(-3) attomole of the dye were recorded.     

胆红素及其两亲衍生物的Langmuir-Blodgett膜研究

研究了亚相酸度和金属离子对胆红素(1)及其两个两亲衍生物胆红素二(十八烷基)酯(2)和胆红素二(十八烷基)酰胺(3)的单分子膜和LB膜性能的影响.通过π-A等温线、X射线光电子能谱、紫外-可见光谱等方法,研究了它们在有序分子膜中的分子伸展及与金属离子的配位方式.胆红素及其两亲衍生物与金属离子在有序分子膜中的配位(生成1:1型配合物)明显不同于其在本体溶液中的配位(1:1,1:2或2:1型配合物).小角X射线衍射表明1,2和3形成双层膜间距分别为2.15,5.55和5.65nm的Y型LB膜.     

IRRAS studies on chain orientation in the monolayers of amino acid amphiphiles at the air-water interface depending on metal complex and hydrogen bond formation with the headgroups

Monolayers of N-octadecanoyl-L-alanine at the air-water interface on pure water and metal ion containing subphases have been studied using polarized infrared reflection-absorption spectroscopy (IRRAS). The metal complex and hydrogen bond formation with the headgroups give rise to a change in chain order depending on metal ion in the subphase. On pure water and Ag(+)-/Pb(2+)-containing subphase, the antisymmetric CH(2) stretching band intensity [nu(a)(CH(2))] undergoes a slower increase than the symmetric one [nu(s)(CH(2))] below the Brewster angle, so the intensity ratios of nu(a)(CH(2))/nu(s)(CH(2)) are less than 1 in the cases of Ag(+) and Pb(2+). Beyond the Brewster angle, the nu(a)(CH(2)) band intensities are substantially reduced in comparison with the nu(s)(CH(2)) ones in the cases of pure water and Ag(+), but the nu(a)(CH(2)) bands still remain negative-oriented in the presence of Pb(2+). These unusual spectral features indicate that the alkyl chains take a preferential orientation with their C-C-C planes parallel to the water surface. The parallel packing of the alkyl chains results from the intermolecular hydrogen bonds C=O...H-N between the neighboring amide groups, strengthened by the metal complex of covalent interaction. On the Ca(2+)-/Cu(2+)-containing subphase, the corresponding polarized spectra display a usual behavior. The alkyl chains are roughly estimated to be inclined around 35-40 degrees from the surface normal on the assumption of chain segment orientation for the monolayers in the liquid-expanded phase. The chain conformation and tilt are closely related to the formation of intramolecular hydrogen bonds and the ionic interaction of the metal complex in the cases of Ca(2+) and Cu(2+).     

FT-Raman and FTIR spectroscopic studies of N-octadecanoyl-L-alanine amphiphiles

FTIR spectroscopy is used to compare the difference in molecular structure between Langmuir-Blodgett (LB) films (transferred at the surface pressure 40 mN/m with the vertical method and 0 mN/m with the horizontal method) and bulk sample of N-Octadecanoyl-L-alanine amphiphiles. The bulk sample possesses a very similar microstructure (intermolecular hydrogen-bonding interaction and triclinic chain packing) to the well-ordered LB films. Much information on molecular structure of the bulk sample is obtained using FT-Raman spectroscopy, and several weak Raman scattering peaks are assigned.     

Engineering of TMDC–OSC hybrid interfaces: the thermodynamics of unitary and mixed acene monolayers on MoS2

Hybrid systems of two-dimensional (2D) materials such as transition metal dichalcogenides (TMDCs) and organic semiconductors (OSCs) have become subject of great interest for future device architectures. Although OSC–TMDC hybrid systems have been used in first device demonstrations, the precise preparation of ultra-thin OSC films on TMDCs has not been addressed. Due to the weak van der Waals interaction between TMDCs and OSCs, this requires precise knowledge of the thermodynamics at hand. Here, we use temperature-programmed desorption (TPD) and Monte Carlo (MC) simulations of TPD traces to characterize the desorption kinetics of pentacene (PEN) and perfluoropentacene (PFP) on MoS₂ as a model system for OSCs on TMDCs. We show that the monolayers of PEN and PFP are thermally stabilized compared to their multilayers, which allows preparation of nominal monolayers by selective desorption of multilayers. This stabilization is, however, caused by entropy due to a high molecular mobility rather than an enhanced molecule–substrate bond. Consequently, the nominal monolayers are not densely packed films. Molecular mobility can be suppressed in mixed monolayers of PEN and PFP that, due to intermolecular attraction, form highly ordered films as shown by scanning tunneling microscopy. Although this reduces the entropic stabilization, the intermolecular attraction further stabilizes mixed films.

Entropic stabilization enables the fabrication of (perfluoro-)pentacene monolayers on MoS₂ by selective multilayer desorption but reduces order and packing density. Intermolecular attraction allows to create ordered close-packed molecular monolayers.     

N,N,N＇,N＇-四苄基取代方块菁染料LB膜研究

方块菁染料在有机光导材料^[1,2]、有机太阳能存储^[2,3]、光记录^[4、有机光盘中红外吸收器^[4]以及光纤识别功能薄膜等领域中有着广泛应用前景.     

Heterometallic FeIII/K Coordination Polymer with a Wide Thermal Hysteretic Spin Transition at Room Temperature

The anionic Fe^III complex exhibiting cooperative spin transition with a wide thermal hysteresis near room temperature, K[Fe(5‐Brthsa)₂] (5‐Brthsa‐H₂=5‐bromosalicylaldehyde thiosemicarbazone), is reported. The hysteresis (Δ=69 K in the first cycle) shows a one‐step transition in heating mode and a two‐step transition in cooling mode. X‐ray structure analysis showed that the coexistence of hydrogen bond and cation–π interactions, as well as alkali metal coordination bonds, to give 2D coordination polymer structure. This result is contrary to previous reports of broad thermal hysteresis induced by coordination bonds of Fe^II spin crossover coordination polymers (with 1D/3D structures), and by strong intermolecular interactions in the molecular packing through π–π stacking or hydrogen‐bond networks. As a consequence, the importance, or the very good suitability of alkali metal‐based coordination bonds and cation–π interactions for communicating cooperative interactions in spin‐crossover (SCO) compounds must be reconsidered.     

Effects of a central metal on the organization of 5,10,15,20-tetra-(p-chlorophenyl)-rare earth porphyrin hydroxyl compound at the air/water interface and in Langmuir-Blodgett films

Langmuir monolayers and Langmuir-Blodgett (LB) films of 5,10,15,20-tetra-(p-chlorophenyl) terbium/gadolinium porphyrin hydroxyl compound (TbOH and GdOH) and their mixtures with stearic acid (SA) in a molar ratio of 1:1 were investigated by Brewster angle microscopy (BAM), ultraviolet-visible (UV-vis), and infrared (IR) spectroscopy and atomic force microscopy (AFM). pi-A isotherms showed that well-defined Langmuir monolayers were formed at an air/water interface for the porphyrins and their mixture with SA. The BAM observations suggest that the pi-pi interaction between the GdOH molecules is stronger than that between the TbOH molecules. This result can be further confirmed by the AFM measurements. After the introduction of SA, the pi-pi interaction between the TbOH molecules is broken and thus two phases formed in the mixed LB film. However, it cannot break the stronger pi-pi interaction between the GdOH molecules. Therefore, no phase separation is observed in the GdOH/SA LB film. IR reflection-absorption (RA) spectra showed that the COOH groups of SA are partly converted to COO(-) groups, suggesting that there is an interaction between MOH and SA in the films. This interaction leads the benzene rings of TbOH to rotate toward parallel to the substrate and those of GdOH to rotate toward perpendicular to the substrate. All these results have demonstrated that the central metal ions have great effects on the organization and formation of the films.     

Structure and temperature behavior of metallo-supramolecular assemblies

A detailed structural analysis of a Langmuir-Blodgett (LB) multilayer composed of a polyelectrolyte-amphiphile complex (PAC) is presented. The PAC is self-assembled from metal ions, ditopic bis-terpyridines, and amphiphiles. The vertical structure of the LB multilayer is investigated by X-ray reflectometry. The multilayer has a periodicity of 57 A, which corresponds to an architecture of flat lying metallo-supramolecular coordination polyelectrolyte (MEPE) rods and upright-standing amphiphiles (dihexadecyl phosphate, DHP). In-plane diffraction reveals hexagonal packing of the DHP molecules. Using extended X-ray absorption fine structure (EXAFS) experiments, we prove that the central metal ion is coordinated to the terpyridine moieties in a pseudo-octahedral coordination environment. The Fe-N bond distances are 1.82 and 2.0 A, respectively. Temperature resolved measurements indicate a reversible phase transition in a temperature range up to 55 degrees C. EXAFS measurements indicate a lengthening of the average Fe-N bond distance from 1.91 to 1.95 A. The widening of the coordination cage upon heating is expected to lower the ligand field stabilization, thus giving rise to spin transitions in these composite materials.     

Preparation and properties of nanosized fluorescent solid films based on a polyelectrolyte-surfactant complex with organic dyes

A procedure for preparing an organosoluble stoichiometric complex based on a cationic polyelectrolyte and an anionic surfactant is described. A method is proposed for forming monolayers at the water-air interface, along with conditions for preparing fluorescent nanosized solid films based on polyelectrolyte complex and organic dyes using the Langmuir-Blodgett (LB) method. The spectral and luminescent properties of the obtained films are investigated. It is established from the absorption and fluorescence spectra of LB films that electrostatic interaction between the molecules of polyelectrolyte complex and oxazine dyes results in dimer formation.     

Surface enhanced fluorescence and Raman imaging of Langmuir-Blodgett azopolymer films

The spectroscopic properties and surface-enhanced spectra of Langmuir-Blodgett (LB) films of methacrylic homopolymer (HPDR13) are presented. It is shown that LB film displays strong fluorescence attributed to the spatial restrictions imposed by its structure. The emission is observed in conjunction with photoisomerization, a process clearly demonstrated by the formation of surface-relief gratings in the LB film [C.R. Mendon?a et al., Macromolecules 32 (1999) 1493]. Surface-enhanced Raman scattering (SERS), Surface-enhanced resonance Raman scattering (SERRS) and surface-enhanced fluorescence (SEF) were observed for LB films of HPDR13 deposited onto silver island films. SERS measurements were also carried out on a sample fabricated with one monolayer LB film deposited onto silver islands followed by one overlayer of silver (LB sandwiched between two layers of silver islands). The polymer interacts very weakly with the metal surface (physisorption), and the enhancement effect is determined by the local electric field enhancement. The strong SERS and SERRS signals were suitable for micro-Raman imaging. Line, area mapping and global images of the LB monolayer on silver island are reported. The transfer ratio in the fabrication of the LB suggests a homogeneous coating of the silver islands, thereby the chemical images show the variation of the SERS intensity due to surface enhancement.     

Investigating the proton transferring route in a heteroaromatic compound part I: a trial to develop di- and trifunctional benzimidazole model compounds inducing the molecular packing structure with a hydrogen bond network

Di- and trifunctional benzimidazole molecules, 1 and 2, have been synthesized as the model compounds to identify their molecular packing structure and hydrogen bond network, which is possibly involved in the proton transfer system belonging to its heteroaromatic functional groups. By carrying out the simple reaction between acid chloride and diamine, the desired benzimidazole model compounds are obtained with high yield above 60%. The comparison studies between the model compounds and benzimidazole reveal that the model compounds show well-packing structure with intermolecular hydrogen bonds similar to those observed in benzimidazole. The presence of solvent with 2 leads to the unique intermolecular hydrogen bonds between one molecule of 2 and six molecules of solvent (i.e., 2-propanol) resulting in the solvent-assisted intramolecular hydrogen bond network among benzimidazole functional groups. The comparative studies of the effect of temperature on the packing structure and hydrogen bond in the model compounds indicate that the development of the benzimidazole unit from monofunctional to difunctional and finally trifunctional enhances the intermolecular interaction between the molecules and results in the stronger molecular packing structure of the compounds. A study on proton conductivity by preparing the sulfonated poly(ether ether ketone) (SPEEK) membranes with benzimidazole, 1, and 2 for 15 phr equivalent to benzimidazole group clarifies (i) incorporation of benzimidazole compounds improves the proton conductivity of SPEEK in dry condition and (ii) the increase in proton conductivity is relevant to the number of benzimidazole group on molecule.     

柔性间隔基对于香豆素取代二乙炔LB膜聚合及手性形成的影响

设计合成了2种香豆素取代二乙炔单体,7-(10,12-二十三双炔酰氧基)-香豆素(CODA)和7-(10,12-二十三双炔酰氧乙氧基)-香豆素(CO2DA),研究了柔性间隔基对香豆素取代二乙炔单体在气-液界面的组装、单体LB膜的聚合以及聚二乙炔主链螺旋结构形成的影响.利用Langmui-Blodgett(LB)技术,以纯水为亚相,膜压在35 mN/m时沉积制备了香豆素取代二乙炔单体LB膜.尽管CODA是非手性的,但其LB膜均表现出明显的宏观手性信号.这是由于在压缩过程中香豆素基团间强烈的π-π堆积,形成了螺旋排列,显示出超分子手性.而CO2DA LB膜无明显CD信号.经254 nm紫外光辐照,CODA LB膜聚合成蓝相,聚二乙炔主链表现出明显的宏观手性.而CO2DA LB膜聚合后无明显的CD信号.薄膜中香豆素功能基团的不规则排列不利于二乙炔单体的固态聚合以及聚二乙炔主链螺旋结构的形成.     

Langmuir monolayers based on rigid wedge-shaped dendrons of benzenesulfonic acid

The structure formation of wedge-shaped monodendrons based on symmetric benzenesulfonic acid with different lengths of peripheral alkyl chains was studied in Langmuir monolayers and Langmuir–Blodgett (LB) films. A phase transition from the liquid-expanded state to the liquid-condensed state was observed on compression of the Langmuir monolayers of the dendrons containing dodecyl lateral chains. The transition is accompanied by the formation of star-shaped aggregates visualized by Brewster angle microscopy. The three-layer LB transfer results in the reorganization of the monolayer into regions of bi-, tetra-, and hexalayers on a solid substrate with a low coverage of the surface. Homogeneous liquid-condensed mono layers are formed for the dendrons with hexa- and octadecyl chains, and the film thickness achieved by the LB transfer corresponds to the monolayer alignment of the molecules with the surface coverage up to 90%. It was determined that varying the alkyl length of wedge-shaped dendrones based on symmetric benzenesulfonic acid leads to a change in phase behavior of Langmuir monolayers as well as Langmuir–Blodgett films formed by them.