Analysis of urban dust (PM<Subscript>2</Subscript>/PM<Subscript>10-2</Subscript>) in Daejeon city by instrumental neutron activation analysis

Summary As part of an air pollution monitoring study, airborne particulate matter (PM₂/PM_10-2) samples were collected from 2000 to 2003 at two sampling sites in an urban region, Daejeon, the middle of Korea. Mass concentrations of both fine and coarse fractions and that of the black carbon in the fine particles were measured using the Gent stacked filter unit sampler and the smoke stain reflectometer, respectively. In the collected samples the concentrations of 24 elements were analyzed using instrumental neutron activation analysis. Monitored data were investigated for their temporal trends under different environmental conditions and their seasonal correlation patterns. Crustal enrichment factors were also estimated to establish the contribution between anthropogenic and crustal origin. Patterns for airborne particle matter (APM) and elemental concentrations, seasonal variation of some marker elements were investigated. The results can be applied for the investigation of further air pollution sources and for the evaluation of air quality.     

Source identification and long-term monitoring of airborne particulate matter (PM<Subscript>2.5</Subscript>/PM<Subscript>10</Subscript>) in an urban region of Korea

Summary For the identification of air pollution sources, about 500 airborne particulate matter (PM_2.5and PM₁₀) samples were collected by using a Gent air sampler and a polycarbonate filter in an urban region in the middle of Korea from 2000 to 2003. The concentrations of 25 elements in the samples were measured by using instrumental neutron activation analysis (INAA). Receptor modeling was performed on the air monitoring data by using the positive matrix factorization (PMF2) method. According to this analysis, the existence of 6 to 10PMF factors, such as metal-alloy, oil combustion, diesel exhaust, coal combustion, gasoline exhaust, incinerator, Cu-smelter, biomass burning, sea-salt, and soil dust were identified.     

Determination of N-Nitroso Compounds in the Environment of a Metal Factory Using Metalworking Fluids

Abstract

By use of GLC-ECD and HPLC-TEA techniques for N-nitroso compounds, N-nitroso-diethanolamine (NDELA) has been found in concentrations of 1.4–6.0 μg/m³ and 1.3–5.0μg/m³ respectively in all four air samples collected in the environment of a metalworking plant during metallurgical operations. NDELA was quantitated in air samples by GLC-ECD after converting it to its trifluoroacetyl derivative by reaction with the appropriate anhydride. NDELA was analyzed without derivatization in air samples using HPLC-TEA method. N-nitrosodimethylamine (NDMA) and N-nitrosodiethylamine (NDEA) were also identified and later determined in two out of four air samples in concentrations of 0.08μg/m³ (for NDMA in both samples) and 0.14–0.16μg/m³ (for NDEA) using GLC-TEA procedure. The described method did not cause artifactual formation of N-nitrosomethyl-N-butylamine (NMBA) when methyl-N-butylamine was used as an internal marker of nitrosation during collection of NDELA in impinger traps.     

PAH and PCB determination of the concentration gradient in moss Pleurozium schreberi near a highway,and seasonal variability at the background reference site

Moss (Pleurozium schreberi) was investigated as biomonitor of atmospheric polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs). Samples were collected at a distance of 10, 50 and 100 m from a highway and were seasonally collected in a forest stand near a regional background air pollution station situated approximately 30 km from the highway. The samples from the background area were dried using two different techniques in parallel, air-drying and freeze-drying. Simultaneous pressurised liquid extraction of PAHs and PCBs was performed, followed by purification using gel permeation chromatography of the crude extract. The concentration of the 15 most important Environmental Protection Agency (EPA) PAHs was determined by gas chromatography coupled with ion-trap mass spectrometry with a selected ion storage acquisition programme, and the PCB concentrations were determined using a mass spectrometer operated in tandem mass spectrometry (MS/MS) mode. Acceptable recoveries and quality parameters for PAHs and PCBs were achieved with the use of pressurised liquid extraction followed by gel permeation chromatography. The detection limit was <0.76 ng g^?1 for PAHs and <0.04 ng g^?1 for PCBs. Possible contamination of the moss samples by 3-ring PAHs and PCBs in the atmosphere was found during air drying. Increased PAH and PCB concentrations caused by car engine exhausts and by asphalt and oil evaporation were found near the highway. Generally, the PAH and PCB concentrations in moss decreased exponentially with distance from the highway. The organic compound concentrations close to the background station showed seasonal fluctuations corresponding to the fluctuations in the local air temperature and particle concentration.     

Determination of the chemical composition of the South Pole aerosol by instrumental neutron activation analysis

Atmospheric particulate samples were collected at the geographic South pole, using cellulose and polycarbonate filters and cascade impactors. The samples were analysed for 40 elements by instrumental neutron activation analysis. From the filter samples atmospheric concentrations for 33 elements could be obtained. The highest atmospheric concentrations were found for S: 49 ng/standard cubic meter (SCM) of air, Na: 3.3 ng/SCM and Cl: 2.6 ng/SCM. In the cascade impactor samples, only a few elements were observed above blank. For these elements it could be concluded that they are associated for over 80–90% with submicron size paricles.     

Risk assessment of inhalation exposure for airborne toxic metals using instrumental neutron activation analysis

In order to study the effects of air pollution, about 1,300 samples of airborne particulate matter (APM) were collected at suburban and industrial sites, in Daejeon, Korea from 1998 to 2006. The concentrations of carcinogenic (As and Cr) and non-carcinogenic metals (Al, Mn, and Zn) were determined by using instrumental neutron activation analysis (INAA). These long-term metal concentration data were applied to a risk assessment of inhalation exposure using Monte Carlo analysis (MCA).     

Elemental analysis of dust trapped in air conditioner filters for the assessment of Lahore city’s air quality

A study was undertaken to assess the air quality of Lahore by the elemental analysis of air conditioner (AC) filter dust samples collected from 15 different commercial sites. Samples were prepared using the Leeds Public Analyst Method and were analyzed using instrumental neutron activation analysis (INAA) for up to 31 elements. The elements Al, As, Ba, Ce, Co, Cr, Cs, Fe, Hf, K, La, Lu, Mn, Na, Nd, Rb, Sc, Sm, Sn, Ta, Th, Yb and Zn were detected in all 15 samples whereas the remaining elements have been detected in fewer samples; i.e. Mg, Sb and Tb were detected in 14 samples, Br and V in ten samples, U in nine samples and Ca and Ti in eight samples only. Al, Ca, Fe, K, Mg and Na were determined in all samples at percentage levels. The concentrations of most elements were found to lie around the mean values for the 15 samples studied and were not orders of magnitude different. However the concentrations of Ca, Mg, Sn and Zn were found to be more variable and were found to be dependant on activities such as construction, fruit and vegetable handling, tin plating and transport, respectively.     

Gas chromatographic-mass spectrometric analysis of formaldehyde in ambient air using a sampling tube

A gas chromatographic-mass spectrometric technique for the analysis of trace concentrations of formaldehyde in air is described. Molecular Sieve 13X was found to be an excellent adsorbent. The collected samples were thermally desorbed onto the analytical column (Porapak T) for separation, and quantified by mass fragmentography (m/e 29 and 30). Advantages of the technique include ppb sensitivity, selectivity and quantitative recovery. Experimental results are given for air samples in a rural area.     

Determination of chemical elements in airborne particulate matter collected at Lembang, Indonesia by particle induced X-ray emission

Monitoring the air quality in ambient air is an important step for assessing the air pollution level in one region and its impact to the human health. In this study, the determination of chemical elements concentrations in airborne particulate matter collected in suburban area of Lembang, Indonesia was carried out. Samples were collected using a Gent stacked filter unit sampler in two size fractions of <2.5 μm (fine) and 2.5–10 μm (coarse). Sampling was conducted twice a week for 24 h from January 2008 to June 2009 and 123 pairs of samples were collected. Black carbon was determined by reflectance and chemical elements analysis were performed using particle induced X-ray emission (PIXE). PIXE as one of ion beam analysis techniques is suitable for analyzing particulate matter for its multielemental analysis with good limits of detection. Results showed that none of daily concentrations of PM_2.5 and PM₁₀ exceeded the 24 h Indonesian NAAQS for PM_2.5 and PM₁₀. Chemical elements such as Mg, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, As, Hg and Pb were determined and the correlation between these elements was reported in order to understand the anthropogenic sources of particulate matter.     

Direct determination of atmospheric lead by Zeeman solid sampling graphite furnace atomic absorption spectrometry (GFAAS)

Summary Atmospheric lead was collected by membrane filters using two low volume air samplers at Jülich, Stolberg, and Wetzlar, Federal Republic of Germany. Sampling times varied from 2 to 8 h. After sampling, each filter was subsampled in two cross-sections using a clean stainless steel punch (diameter 5 mm). The lead content of each subsample disc was determined directly by Zeeman GFAAS, calibrated with aqueous standard solutions and supported by solid reference materials. The distribution of lead between the subsamples was generally homogeneous, with standard deviations ranging from 11 to 37%, but typically <15% for samples with 8 h sampling time. The analysis of each filter usually took about 30 min. The differences in air quality between the three sampling locations, as measured by the lead concentrations, are discussed. In general, Stolberg appears to have the highest lead concentrations. The mass particle-size distribution of lead in the aerosol samples collected by membrane filters using a cascade impactor at Stolberg was also investigated with the same analytical technique. Using graphite platform boats as direct samplers, it is possible for the dry deposition flux of lead to be estimated. This provides a quick means of assessing the levels of lead pollution in the atmospheric environment. With lead concentrations measured in parallel, the dry deposition velocities of lead can be estimated under various meteorological conditions. Application of similar sampling and analytical techniques to other atmospheric trace metals may be possible.     

Quality control materials for the determination of trace elements in airborne particulate matter

The development of quality control materials for the determination of selected trace elements in air pollution studies is described. Three types of test samples were prepared for proficiency testing: (1) filters loaded with PM10 fraction of urban air particulate matter (APM) using high-volume air samplers, which were subsequently divided into smaller sections, (2) a bulk sample of APM collected in an automobile tunnel in Prague, and (3) simulated air filters loaded with APM using a wet deposition process. Homogeneity of the test samples was studied using instrumental neutron activation analysis, proton induced X-ray emission and atomic absorption spectrometry, and inductively coupled plasma optical emission spectrometry and mass spectrometry. Sufficiently homogeneous samples were prepared by all three procedures. The simulated air filters appeared to be the most suitable test samples for proficiency testing.     

The Importance of Long and Short-Term Air-Soil Exchanges of Organic Contaminants

Abstract

Retrospective analysis of archived soil samples collected and stored from long-term agricultural experiments in the UK has shown how soil organic chemical composition has changed over time. High molecular weight polycyclic aromatic hydrocarbons (e.g. benzo[a]pyrene) and polychlorinated dibenzo-p-dioxins and -furans have increased in concentration through this century as a result of cumulative atmospheric depositional inputs. Concentrations of polychlorinated biphenyls and low molecular weight hydrocarbons (e.g. phenanthrene) peaked in the late 1960s/early 1970s, but have declined subsequently. This reflects declining atmospheric inputs of these compounds and losses from surface soils by volatilisation back to the atmosphere and biodegradation. PCBs and low molecular weight PAHs exist predominantly in the vapour phase in air, whilst heavy PAHs and PCDD/Fs are predominantly particulate-bound. Outgassing from soils is probably the most important contemporary source of PCBs to the atmosphere in the UK. Future UK PCB air concentrations will presumably therefore be influenced (controlled) by the rate of desorption and outgassing, as soil and air concentrations move towards a condition of equilibrium partitioning. Archived soils collected and stored before the commercial manufacture of PCBs contain no PCBs indicating that there is no ‘natural production’ of these compounds. However, within a few hours of exposure to contemporary air these samples contain detectable quantities of PCBs. Short-term air-soil exchange, such as during soil drying in the laboratory, can lead to contamination of samples which contain low concentrations of PCBs and loss from samples which contain high concentrations.     

Concentration of239, 240Pu in human bone

Some results of the plutonium determination for bone ash samples collected in Japan are presented. Mean^239,240Pu concentration in the adult vertebra was 0.53 pCi/kg of ash during the period 1978 through 1983. The data are roughly in coincidence with estimated plutonium concentrations in the trabecular bone from reported air plutonium concentrations using the ICRP model and metabolic data, and weight of bone in Reference Japanese Man.     

Method for calibrating olfactometer output. Part 2. Amyl acetate

A method for measuring amyl acetate in air was developed and validated. Known volumes of air samples from the output of an olfactometer, a device used to generate odor stimuli, were passed through charcoal sorbent tubes. Following extraction of the sorbent with carbon disulfide, the amount of amyl acetate collected on each tube was determined by gas chromatography with flame ionization detection. The method was used to determine the actual concentrations of amyl acetate presented to experimental participants in odor sensitivity testing.     

The composition and concentration of hydrocarbons in the range of C2 to C18 in downtown Los Angeles,CA

Ambient air samples were collected in the downtown Los Angeles (California) area and analyzed for non-methane hydrocarbons in the range of C2 to C18. Two daily samples were collected, using stainless steel canisters and Tenax-TA solid adsorbent cartridges, over four days in August 1991. The samples were analyzed using high resolution gas chromatographic separation and Fourier transform infrared/mass spectrometric detection (GC/IRD/MSD) or flame ionization detection (FID) of individual hydrocarbons. The comparison of hydrocarbon concentrations found in the Tenax and canister samples and the assessment of the contribution of semivolatile hydrocarbons (C10–C18 range) to the sum of non-methane hydrocarbons (C2–C10 or C2–C12), as measured by the canister method, is presented. This contribution ranges from ~7% to 15% (for C10–C18 range) and ~3% to 8% (for C12–C18 range). The semivolatile hydrocarbons also contribute ~16% to the total ozone forming potential of non-methane hydrocarbons.     

Fractionation and Chemical Analysis of Urban Air Particulate Extracts

Abstract

Urban air samples were collected using Hi-Vol PM₁₀ samplers during 24 hours periods. Samples were collected from October 1993 to September 1994 both in Teplice and Prachatice and from October 1996 to April 1997 in Teplice, CR. Organic material (EOM) was extracted from filters with methylene chloride in a Soxhlet apparatus. Acid base partitioning of the crude extract was carried out and neutral compounds were further fractionated by silica gel column chromatography. More than one hundred and seventy compounds were identified by GC-MS in the fractions. Levels of PAHs and the distribution profile was similar at both sampling locations. Higher concentrations of PAHs, nitro-PAHs, polycyclic aromatic ketones and organic acids and bases were observed in winter period when the fuel consumption for home heating is high.     

Development and validation of a method for the determination of trace alkylphenols and phthalates in the atmosphere

An analytical method has been developed for the simultaneous extraction and determination of trace tertiary octylphenol (t-OP), technical nonylphenol isomers (NP), nonylphenol monoethoxylate isomers (NP1EO) and seven phthalates in the atmosphere using gas chromatography-mass spectrometry (GC-MS). High volume samples were collected using a high-volume pump equipped with a PUF/XAD-2 column for air and glass fiber filter for particles. The detection limits of the method for alkylphenols (APs) and the phthalates ranged from 0.0006 to 0.034 ng m⁻³ in air. The recoveries of t-OP, NP, NP1EO and the phthalates for the entire procedure were satisfactory (>69%). The method was successfully applied to the determination of the analytes in the atmosphere samples collected over land and the ocean. The concentrations of t-OP, NP, NP1EO showed decline trends from land to the open sea, and the phthalates present over land and the North Sea were comparable. It is suggested that the atmosphere is a significant pathway for the transport of alkylphenols and the phthalates in the environment.     

Impact of phase out of leaded gasoline on the air quality in Budapest

As part of an air pollution study in Budapest, size-fractionated aerosol samples were collected by stacked filter units and cascade impactors, and some criteria pollutants and meteorological parameters were recorded in 1996, 1998 and 1999. The samplings were performed at three urban locations including an urban background site, a downtown site, and a tunnel. Elemental composition of the aerosol samples was measured by instrumental neutron activation analysis and/or particle-induced X-ray emission spectrometry; and black carbon (BC) was determined by a light reflectance technique. Since leaded gasoline was completely phased out in Hungary on 1 April 1999, the atmospheric concentrations of some typical transportation-related air pollutants (i.e. Pb, Br, BC and CO) were used for overviewing the actual impact of the phase out on the air quality and on the aerosol characteristics. For the background site, mean concentration of Pb and Br was not changed significantly. In the downtown site, the phase out resulted in a concentration decrease by a factor of 3–4 for Pb and Br. For the tunnel, concentrations of Pb and Br were decreased by a factor up to 9 and 28, respectively. Correlation between the pollutants, their crustal enrichment factors, and average elemental mass size distributions are also presented and discussed.     

Annual variations of the elemental concentrations of PM10 in ambient air of Nagoya City as determined by ICP-AES and ICP-MS.

PM10 samples were collected at an urban site of Nagoya City during September, 2003, to August, 2004, and annual variations of the concentrations of the elements in PM10 samples were examined by inductively coupled plasma atomic emission spectrometry (ICP-AES) and inductively coupled plasma mass spectrometry (ICP-MS). The annual concentration variations of ca. 30 elements in ambient air were in the range from sub-ng m(-3) to several microg m(-3). From an evaluation by the enrichment factors of the elements, elements such as Al, Ca, Fe, Mg, Ti, Mn, Ba, Sr, Ce, La, Nd, Co, Cs, and Pr, in PM10 samples were found to have originated mostly from natural sources, while the elements such as S, Zn, Pb, Cu, Ni, Sb, Sn, Cd, Bi, W, Tl, and In originated from anthropogenic emission sources. Furthermore, in seasonal variations of the elemental concentrations of PM10 samples in ambient air, the elements originated mostly from natural sources provided significantly high concentrations in spring during the "Kosa" period (the dust season from March to May). On the other hand, the elements mainly from anthropogenic emission sources provided relatively higher concentrations in autumn and winter, which may be explained by the fact that the urban atmospheric structure is stabilized by the temperature-inversion layer formed over the city in those seasons. In addition, all of the elements provided significantly low concentrations in the summer, due to the dilution effect of the oceanic winds as well as due to the convection of air mass up to the high levels.     

Particle-size distribution of polycyclic aromatic hydrocarbons in urban air in southern Spain

The size distribution of polycyclic aromatic hydrocarbons (PAH) was determined for airborne particles from a large city with high vehicular traffic. The analytical method was optimised and validated using NIST standard reference material (SRM 1649a Urban Dust). The 16 priority PAH listed in the US-EPA were Soxhlet-extracted from filtered particulate matter and then fractionated using on-column chromatography. The aromatic fraction was quantified by gas chromatography-mass spectrometry. Real samples of particles collected in Seville (Spain) were analysed using the validated method. Values for the total concentration of PAH in the air, as well as the concentrations of each PAH in six particle-size ranges were obtained. Values of the PAH in TSP, PM₁₀, PM_2.5 and PM₁ were assessed.