Fluorous mixture synthesis of (-)-dictyostatin and three stereoisomers

[reaction: see text] A mixture of four stereoisomers whose configurations are encoded by fluorous silyl protecting groups has been prepared and converted over 22 steps to a mixture of protected dictyostatins. Demixing by fluorous HPLC followed by removal of the fluorous protecting groups (detagging) provides dictyostatin and three C6,C7 stereoisomers. Biological evaluation showed that the monoepimers of the natural product retained highly potent activity.     

Synthesis of chlorinated and non-chlorinated biphenyl-2,3- and 3,4-catechols and their [2H3]-isotopomers

A synthetic scheme is described for chlorinated biphenyl-2,3- and 3,4-catechols to be used as standards for structural assignment of metabolites and protein adducts of 2,2',5,5'-tetrachlorobiphenyl in which both rings retain chlorine substituents. The scheme has general applicability to the synthesis of chlorinated biphenyl catechols. Dimethyl catechol ethers are coupled to dichloroaniline via the Cadogan reaction to give a library of isomers, followed by demethylation of the ethers with BBr3 to yield the target catechols. Separation of pure isomers is accomplished by TLC or HPLC prior to or following demethylation, depending on the isomer mixture. [2H3]-Isotopomers are generated using 2,5-dichloroaniline-d3 as the starting arylamine in the coupling reaction. The dichloroaniline-d3 hydrochloride is obtained as the sole product from nitration of p-dichlorobenzene-d4 followed by Pd/C-catalyzed hydrogenation under strongly acidic conditions. This hydrogenation procedure provides a simple and convenient approach to selective reduction of aryl nitro groups in the presence of halogen ring substituents.     

Fluorous mixture synthesis of stereoisomer libraries: total syntheses of (+)-murisolin and fifteen diastereoisomers

The synthesis of a stereoisomer library of 16 murisolins in individual pure form by fluorous mixture synthesis is reported. Four stereoisomeric precursors are tagged with different fluorous tags, and the resulting mixture is taken through the synthesis with four splits and late stage demixing and detagging to give all 16 products. These products exhibit only six different sets of NMR spectra, but all can be differentiated by chiral HPLC. The structure of murisolin is confirmed, but the structures of murisolin A and 16,19-cis-murisolin may never be known with certainty because insufficient data were collected on natural samples to differentiate each of them from one other isomer.     

High-throughput five minute microwave accelerated glycosylation approach to the synthesis of nucleoside libraries

The Vorbrüggen glycosylation reaction was adapted into a one-step 5 min/130 degrees C microwave assisted reaction. Triethanolamine in acetontrile containing 2% water was determined to be optimal for the neutralization of trimethylsilyl triflate allowing for direct MPLC purification of the reaction mixture. When coupled with a NH3/methanol deprotection reaction, a high-throughput method of nucleoside library synthesis was enabled. The method was demonstrated by examining the ribosylation of 48 nitrogen containing heteroaromatic bases that included 25 purines, four pyrazolopyrimidines, two 8-azapurines, one 2-azapurine, two imidazopyridines, two benzimidazoles, three imidazoles, three 1,2,4-triazoles, two pyrimidines, two 3-deazapyrimidines, one quinazolinedione, and one alloxazine. Of these, 32 yielded single regioisomer products, and six resulted in separable mixtures. Seven examples provided inseparable regioisomer mixtures of -two to three compounds (16 nucleosides), and three examples failed to yield isolable products. For the 45 single isomers isolated, the average two-step overall yield +/- SD was 26 +/- 16%, and the average purity +/- SD was 95 +/- 6%. A total of 58 different nucleosides were prepared of which 15 had not previously been accessed directly from glycosylation/deprotection of a readily available base.     

Solution-phase parallel synthesis with oligoethylene glycol sorting tags. Preparation of all four stereoisomers of the hydroxybutenolide fragment of murisolin and related acetogenins

The principles of the oligoethylene glycol (OEG) mixture synthesis are illustrated with the synthesis of all four possible stereoisomers of a hydroxybutenolide fragment common to murisolin and many other acetogenins. Modified dimethoxybenzyl groups with varying numbers of OEG units (-CH2CH2O-) are used to protect alcohols and serve as codes for configurations at two stereocenters. The encoded isomers are carried through several steps in a sequence of mixing prior to the reaction and then demixing during the separation to give individual pure products. A new tagging scheme is introduced in which a stereocenter bearing a hydroxy group is given two different tags. These initially redundant tags then serve to encode the configuration of another (untagged) stereocenter by appropriate pairwise reactions of the tagged precursors. The experimental features (reaction, analysis, separation, and characterization) of OEG mixture synthesis are detailed and are compared to and contrasted with those of fluorous mixture synthesis.     

Investigation of ion/molecule reactions as a quantification method for phosphorylated positional isomers. an FT-ICR approach

A rapid and accurate method of quantifying positional isomeric mixtures of phosphorylated hexose and N-acetylhexosamine monosacchrides by using gas-phase ion/molecule reactions coupled with FT-ICR mass spectrometry is described. Trimethyl borate, the reagent gas, reacts readily with the singly charged negative ions of phosphorylated monosaccharides to form two stable product ions corresponding to the loss of one or two neutral molecules of methanol from the original adduct. Product distribution in the ion/molecule reaction spectra differs significantly for isomers phosphorylated in either the 1- or the 6-position. As a result, the percents of total ion current of these product ions for a mixture of the two isomers vary with its composition. In order to determine the percentage of each isomer in an unknown mixture, a multicomponent quantification method is utilized in which the percents of total ion current of the two product ions for each pure monosaccharide phosphate and the mixture are used in a two-equation, two-unknown system. The applicability of this method is demonstrated by successfully quantifying mock mixtures of four different isomeric pairs: Glucose-1-phosphate and glucose-6-phosphate; mannose-1-phosphate and mannose-6-phosphate; galactose-1-phosphate and galactose-6-phosphate; N-acetylglucosamine-1-phosphate and N-acetylglucosamine-6-phosphate. The effects of mixture concentrations and ion/molecule reaction conditions on the quantification are also discussed. Our results demonstrate that this assay is a fast, sensitive, and robust method to quantify isomeric mixtures of phosphorylated monosaccharides.     

Structure assignment of lagunapyrone B by fluorous mixture synthesis of four candidate stereoisomers

Techniques of fluorous mixture synthesis have been used to make four candidate stereoisomers for the natural product lagunapyrone B. A quasiracemic mixture of vinyl iodides whose component configurations at C19-21 were encoded by fluorous silyl groups was fused to a central fragment by a Negishi coupling. A separate quasiracemic mixture of pyrone fragments whose component configurations at C6,7 were also encoded by fluorous silyl groups was synthesized and demixed. Stille coupling of the resulting pure quasienantiomers with the quasiracemic mixture provided two quasi-diastereomeric samples, which were demixed and detagged to provide all four lagunapyrone B stereoisomers. Lagunapyrone was assigned the 6R,7S,19S,20S,21R configuration by comparison of optical rotations.     

对环芳烷二氯化产物组成的GC—MS表征

对环芳烷([2,2]Paracyclophane,简称PCP）是指苯环对位桥联的化合物,PCP及其氯代PCP的重要用途是通过升华、裂解、聚合等步骤沉积于物体表面形成聚合膜,该聚合膜具有透湿和透气小、抗化学腐蚀和抗辐射等优良性能[1,2].     

Minimal fluorous tagging strategy that enables the synthesis of the complete stereoisomer library of SCH725674 macrolactones

Four mixtures of four fluorous-tagged quasiisomers have been synthesized, demixed, and detagged to make all 16 stereoisomers of the macrocyclic lactone natural product Sch725674. A new bare-minimum tagging pattern needs only two tags--one fluorous and one nonfluorous--to encode four isomers. The structure of Sch725674 is assigned as (5R,6S,8R,14R,E)-5,6,8-trihydroxy-14-pentyloxacyclotetradec-3-en-2-one. Various comparisons of spectra of 32 lactones (16 with tags, 16 without) and 16 ester precursors (8 with tags, 8 without) provide insights into when and why related compounds have the same or different spectra.     

Isolation and characterization of nongeminal cyclic methylphenylphosphazene tetramers

Heating pure samples of the cyclic phosphazenes, cis- or trans-[Me(Ph)PN](3), yielded mixtures of the cis and trans isomers of the cyclic phosphazene trimers, [Me(Ph)PN](3), and all four geometric isomers of the tetramers, [Me(Ph)PN](4). Varying the temperature and heating times changes the ratio of these components. Following the thermolysis by NMR spectroscopy indicated that only a mixture of the two isomeric trimers occurred initially. Longer heating times produced mixtures of the isomers of the tetramer. Column chromatography and solubility differences were used to separate each of the isomers of the tetramer. Spectroscopic and X-ray crystallographic studies suggest that the four different geometrical isomers of the tetramer can be described as cone, partial cone, 1,2-alternate, and 1,3-alternate by analogy to calix[4]arene.     

Solution-phase preparation of a 560-compound library of individual pure mappicine analogues by fluorous mixture synthesis

Solution-phase mixture synthesis has efficiency advantages and favorable reaction kinetics. Applications of this technique, however, have been discouraged by the difficulty in obtaining individual, pure final products by using conventional separation and identification processes. Introduced here is a new strategy for mixture synthesis that addresses the separation and identification problems. Members of a series of organic substrates are paired with a series of fluorous tags of different chain lengths. The tagged starting materials are then mixed and taken through a multistep reaction process. Fluorous chromatography is used to demix the tagged product mixtures on the basis of the fluorine content of the tags to provide the individual pure components of the mixture, which are detagged to release the final products. The utility of fluorous mixture synthesis is demonstrated by the preparation of a 560-membered library of analogues of the natural product mappicine. A seven-component mixture is carried through a four-step mixture synthesis (two one-pot and two parallel steps) to incorporate two additional points of diversity onto the tetracyclic core. Methods for analysis and purification of the intermediates are established for the quality control of the mixture synthesis.     

Determining synthetic failures in

A combinatorial tripeptide library having the general form D-Glu-Xxx-Xxx-CONH2 has been synthesized using a standard mix and split synthetic protocol that is expected to produce 676 components. All components of the mixture were analyzed using a new high-resolution ion mobility/time-of-flight mass spectrometer coupled with an electrospray ionization source. In this approach ions are separated by differences in their gas-phase mobilities prior to being introduced into the mass spectrometer for mass-to-charge analysis. The peptide library includes a wide range of different sequence, structural, and stereo isomers; trends in the number of expected and resolved isomers that are observed at each m/z ratio allow specific synthetic steps that have failed to be identified, even in the presence of other isomers. Information about the relative abundances of different isomers should dramatically improve the reliability of binding affinity studies from direct analysis of mixtures.     

On the structure of the Phytophthora α1 mating hormone: synthesis and comparison of four candidate stereoisomers

Two two-compound mixtures of candidate structures for the Phytophthora α1 mating hormone have been synthesized. The mixtures were designed to have differing configurations at C3, but proved to be identical. This suggests that epimerization occurred at C3, and comparison with the data for the natural samples suggest that this is also a mixture of isomers.     

Stereoselective hydrogenation of (−)-menthone and (+)-isomenthone mixture using nickel catalysts

The catalytic hydrogenation of an optically active mixture of (−)-menthone and (+)-isomenthone was studied. The catalysts Raney nickel and Ni/SiO₂ were used for these hydrogenations. Catalysts modified with (2R,3R)-(+)-tartaric acid were tested as well. Various non-equilibrium mixtures of isomers were produced by means of these reactions, especially mixtures containing the less stable menthol isomers, (+)-neomenthol and (+)-neoisomenthol. (−)-Menthol was produced during these reactions to a limited extent, the production of (−)-isomenthol was barcly existent. Isomerization of (−)-menthone and (+)-isomenthone occurred during these reactions. Isomerizations among individual isomers were barely detectable. The catalysts used showed a very low activity under the given reaction conditions.     

Expedient asymmetric synthesis of all four isomers of N,N'-protected 2,3-diaminobutanoic acid

2,3-Diaminobutanoic acid (DAB) is found in several peptide antibiotics, toxins, and biologically active molecules. This paper describes the practical and highly enantioselective synthesis of all four N,N'-protected DAB stereoisomers using an asymmetric Rh(I)-phosphine-catalyzed hydrogenation of isomeric enamides as the key step. Thermal and photochemical isomerization of the enamide hydrogenation substrates coupled with catalyst-geometric isomer pairing allows targeted synthesis of single DAB isomers in maximum yield.     

Rational synthesis of multicyclic bis[2]catenanes

Bis-loop tetraurea calix[4]arene 6 has been prepared by acylation of the wide-rim calix[4]arene tetraamine 1 with the activated bis(urethane) 8 under dilution conditions. Similarly the bis(Boc-protected) tetraamine 2 is converted into the mono-loop derivative 3 which after deprotection and acylation gives the bisalkenyl derivative 5. In apolar solvents this tetraurea calix[4]arene 5 forms regioselectively a single hydrogen-bonded homodimer, from which the bis[2]catenane 10a is formed in 49% by a metathesis reaction followed by hydrogenation. Bis-loop derivative 6 forms no homodimers for steric reasons, but a stoichiometric mixture with the open-chain tetraalkenyl derivative 7a contains exclusively the heterodimer. Metathesis and subsequent hydrogenation now yields 65 % of the pure bis[2]catenane 10a which could not be isolated from the complex reaction mixture obtained from the homodimer 7a.7a. The chirality of 10a (D(2) symmetry) has been verified by optical resolution using HPLC on a chiral stationary phase.     

Synthesis and spectroscopic analysis of a stereoisomer library of the phytophthora mating hormone α1 and derived bis-Mosher esters

Fluorous mixture synthesis provided all eight diastereomers of the phytophthora hormone α1 with the R configuration at C11 as individual samples after demixing and detagging. The library of all possible bis-Mosher esters (16) was then made by esterification. Complete sets of (1)H, (13)C, and (for the Mosher esters) (19)F NMR spectra were recorded, assigned, and compared with each other and with published spectra. Not all of the spectra are unique, and the (1)H NMR spectra of the Mosher esters provided the most information. The previous assignment of the natural sample as an "all-R" stereoisomer mixed with its 3S-epimer was confirmed.     

Fluorous mixture synthesis of 4-alkylidene cyclopentenones via a rhodium-catalyzed [2+2+1] cycloaddition of alkynyl allenes

Fluorous mixture synthesis was used to prepare a library of 4-alkylidene cyclopentenones starting from a mixture of four alpha-amino acid derivatives tagged with different fluorous benzyl carbamates ((F)CBz) of varying fluorine content. The amino acids were converted to the corresponding propargyl esters and then subjected to an ester-enolate Claisen rearrangement to give a mixture of allenic amino esters. The allenes were then split four ways and propargylated with different propargyl bromides to give four mixtures of alkynyl allenes. The 4-alkylidene cyclopentenones were formed by a formal [2+2+1] cycloaddition of the alkynyl allenes using catalytic [Rh(CO)2Cl]2 under CO atmosphere. Demixing by fluorous preparative HPLC, removal of the fluorous benzyl carbamates, and then exposure to HCl/ether gave the hydrochloride salts of 16 compounds as diastereomeric mixtures in 69-99% purity. Thus, after just 26 chemical steps, a library of 16 cyclopentenones was prepared by using fluorous mixture synthesis. By comparison, the same library would have required 112 steps if each compound were made individually by parallel synthesis.     

The Stereochemistry of the Reduction of Cyclic Enaminones

Summary.  The stereo- and regiochemistry of di-, tri-, and tetracyclic enaminones upon catalytic hydrogenation on Pd and Pt catalysts seems to be mainly a function of the catalyst and the medium. The highest stereoselectivity was observed for multiflorine on Pd/C in which 99% of equatorial alcohol were formed in this case, the formation of alcohols proceeds via a ketonic intermediate. On platinum, irrespective of the solvent used (EtOH, H₂O, AcOH, HCl), the hydrogenation reaction proceeds through ketonic (piperidone system) and dehydro (pyridone system) intermediates. In EtOH or H₂O solution, the dehydro product remains unchanged, whereas the ketonic intermediate is reduced to a mixture of epimeric alcohols. In HCl and acetic acid, both intermediates are hydrogenolyzed to a product with a methylene group, but the ketonic one is additionally reduced to a mixture of epimeric alcohols. Reductions with complex metal hydrides provide mixtures of epimeric alcohols with a predominance of equatorial orientation. The structures of products were determined by NMR spectroscopy and/or by GC-MS analysis. Received December 28, 2000. Accepted (revised) February 16, 2001     

Thermodynamic rearrangement synthesis and NMR structures of C1, C3, and T isomers of C60H36

The structures of three C60H36 isomers, produced by high-temperature transfer hydrogenation of C(60) in a 9,10-dihydroanthracene melt, was accomplished by 2D (1)H-detected NMR experiments, recorded at 800 MHz. The unsymmetrical C(1) isomer is found to be the most abundant one (60-70%), followed by the C(3) isomer (25-30%) and the least abundant T isomer (2-5%). All three isomers are closely related in structure and have three vicinal hydrogens located on each of the 12 pentagons. Facile hydrogen migration on the fullerene surface during annealing at elevated temperatures is believed to be responsible for the preferential formation of these thermodynamically most stable C60H36 isomers. This hypothesis was further supported by thermal conversion of C60H36 isomers to a single C(3v) isomer of C60H18.