Laser Sintering of a Porous TiO2 Film in Dye-Sensitized Solar Cells

We investigate the possibility of modifying the porous structure of TiO₂ films in dye-sensitized solar cells (DSSC) in its sintering by a pulsed Nd:YAG laser (wavelength 1064 nm) to improve their parameters and characteristics. Sintering at various pulse energies enabled a porosity within the range of 0.45 to 0.20. The efficiency of the energy conversion in experimental DSSC specimens with TiO₂ films sintered by an optimum laser-radiation pulse energy of 150 mJ was 20–25% higher than that of commercial solar cells.     

Improved performance of TiO2 electrodes coated with NiO by magnetron sputtering for dye-sensitized solar cells

TiO₂ electrodes are coated with NiO by DC magnetron sputtering, and their structural, optical and electrochemical performance has been investigated. X-ray diffractometry (XRD), UV-vis spectrophotometry, scanning electron microscopy (SEM), AC impedance, and linear sweep voltammetry (LSV) are used to characterize the TiO₂/NiO electrodes. Their performance is evaluated with a computer controlled electrochemical workstation in combination with three conventional electrodes. The experimental results indicate that the surface modification of TiO₂ electrodes with sputtered NiO reduces trap sites on TiO₂ and improves the electrochemical performance of dye-sensitized solar cells (DSSCs). Sputtering NiO for 7 min, which is about 21 nm thick, on 6.5 μm thick TiO₂ greatly improves the DSSC parameters, and the conversion efficiency increases from 3.21 to 4.16%. Mechanisms of the influence of the NiO coating on electrochemical performance are discussed.     

电沉积处理与染料敏化纳米薄膜太阳电池的优化

采用阳极氧化水解法对染料敏化纳米TiO₂薄膜太阳电池的光阳极进行不同方式的电沉积优化处理.借助x射线衍射仪对处理后的样品进行分析，通过超高分辨率场发射扫描电子显微镜对导电玻璃以及电沉积处理前后纳米多孔薄膜表面进行了粒径和形貌的扫描.染料敏化太阳电池实验测试结果表明，电沉积处理和修饰后可以明显提高光生电子的收集率，增大短路电流密度，提高电池效率. 关键词： 2')" href="#">纳米TiO₂ 染料敏化 电沉积 太阳电池     

Natural dye-based photoelectrode for improvement of solar cell performance

In the present paper, photovoltaic studies of dye-sensitized solar cells (DSSCs) based on betacyanin/TiO₂ and betacyanin/WO₃–TiO₂ have been done. The cell performances were compared through I–V curves and wavelength dependant photocurrent measurements for the two new types of DSSCs. The TiO₂-coated DSSC showed the photovoltage and photocurrent of 300 mV and 4.96 mA/cm², whereas the cell employing WO₃–TiO₂ photoelectrode showed the values 435 mV and 9.86 mA/cm², respectively. The conversion efficiency of TiO₂ based dye-sensitized solar cell was found to be 0.69 %, while WO₃–TiO₂-based cell exhibited a higher conversion efficiency of 2.2 %. The better performance of the WO₃–TiO₂ dye-sensitized solar cell photoelectrode is thought to be due to an inherent energy barrier at the electrode/electrolyte interface leading to the reduced recombination of photoinduced electrons.     

纳米TiO2颗粒/亚微米球多层结构薄膜内电荷传输性能研究

本文主要利用TiO₂亚微米球较强的光散射特性设计了纳米TiO₂颗粒/亚微米球多层结构光阳极, 并借助强度调制光电流谱(intensity-modulated photocurrent spectroscopy)、电化学阻抗谱(electrochemical impedance spectroscopy)和入射单色光光电转化效率(incident photon-to-current conversion efficiency), 研究亚微米球的引入对多层结构薄膜内缺陷态、电子传输时间、电子收集效率和界面电荷转移性能的影响. 强度调制光电流谱反映出亚微米球表面缺陷态少, 但其颗粒间接触不紧密, 导致在接触部位形成了势垒, 阻碍了电子的传输, 导致电子传输时间增长. 电化学阻抗谱结果表明不同多层结构电池界面复合无明显差别, 同时底层采用纳米TiO₂ 透明薄膜结构的电池, 其光利用率要明显高于底层采用亚微米球薄膜结构的电池, TiO₂费米能级电子填充水平也相对增大, 使得电池的光电转换效率得到提升. 多层结构复合薄膜电荷传输和光伏特性的研究, 为高效染料敏化太阳电池光阳极设计提供了实验基础.     

金属氧化物修饰对介孔纳米TiO2电极的染料敏化太阳能电池电化学性能的影响

将介孔TiO₂纳米粒子(m-TiO₂)多孔膜电极浸入相应的金属硝酸盐的500 oC热处理修饰金属氧化物(如Mg、ZnO、Al₂O₃或NiO).结果表明,金属氧化物修饰均可形成能垒对m-TiO₂膜电极的界面电荷传输过程产生影响,但外加偏压下其膜内电子传输和界面电荷复合均明显依赖于修饰氧化物的种类及其存在形态. 金属氧化物修饰的膜电极在电子传输和界面复合方面的变化与DSSCs的电流-电压特性曲线的变化规律具有明显的相关性,可不同程度地提高电池的光电压,而MgO、ZnO和NiO修饰的电池效率分别提高了23%、13%和6%. 上述结果表明调控电池的本征参数可以改善TiO₂-基DSSCs的性能.     

Controlled synthesis of TiO2-B nanowires and nanoparticles for dye-sensitized solar cells

Controllable synthesis of the TiO₂-B nanowires (NWs) and nanoparticles (NPs) had been achieved via a facile hydrothermal route, respectively, only by tuning the solution volume. The dye-sensitized solar cells prototypes had been fabricated using TiO₂-B NW and NP electrodes, respectively. The TiO₂-B NP cells had higher photocurrent and photoelectrical conversion efficiency than the TiO₂-B NW cells though the latter exhibited larger photovoltage compared to the former. The key factors such as the photogenerated electron injection drive force, surface defects and the interfacial charge transfer, which determined the photoelectrical properties, had been systematically researched with the surface photovoltage spectra (SPS) and the electrochemical impedance spectra (EIS). The SPS proved that there was larger photoelectron injection drive force in TiO₂-B NP photoelectrode than that in NW photoelectrode. And the electrochemical impedance spectra (EIS) revealed that TiO₂-B NP cells had faster interface charge transfer compared to TiO₂-B NW cells. Both proved that NP cells had the higher photocurrents.     

Applications of vertically oriented TiO2 micro-pillars array on the electrode of dye-sensitized solar cell

In this research, dye-sensitized solar cells based on TiO₂ micro-pillars fabricated by inductive couple plasma etcher were investigated by analyses of X-ray diffraction (XRD), scanning electron microscopy (SEM), contact angle, ultraviolet-visible absorption spectra (UV-vis), and current-voltage characteristics. X-ray diffraction patterns show that the TiO₂ anatase phase forms while sintering at 450 °C for 30 min. The SEM images reveal that the diameter and height of TiO₂ micro-pillars are about 3 and 0.8 μm, respectively. The measurements of contact angle between TiO₂ micro-pillars and deionized water (DI water) reveal that the TiO₂ micro-pillars is super-hydrophilic while annealed at 450 °C for 30 min.The absorption spectrum of TiO₂ micro-pillars is better than TiO₂ thin film and can be widely improved in visible region with N3 dye adsorbed. The results of current-voltage (I-V) characteristics analysis reveal that dye-sensitized solar cell with TiO₂ micro-pillars electrode has better I-V characteristics and efficiency than TiO₂ film electrodes. This result may be due to the annealed TiO₂ micro-pillars applied on the electrode of dye-sensitized solar cell can increase the contact area between TiO₂ and dye, resulting in the enhancement of I-V characteristics and efficiency for dye-sensitized solar cell.     

ZnO/TiO2 core–shell nanowire arrays for enhanced dye-sensitized solar cell efficiency

We present a new method of synthesizing ZnO/TiO₂ core–shell nanowire (NW) arrays for the fabrication of dye-sensitized solar cells (DSSCs). Vertically aligned ZnO NW arrays were obtained on Si substrates, and modified by a TiO₂ shell in order to solve the recombination problems via a cost-effective spin-coating method. The structure of the ZnO/TiO₂ composite NW arrays was characterized. The experimental results indicate that the TiO₂ shell enhances the performance of the DSSCs, through improving the stability of the ZnO NWs and decreasing the recombination of photogenerated electrons on the NW surface. The highest overall conversion efficiency of the cell reaches about 3.0 %.     

纳米TiO2多孔薄膜电极平带电势的研究

采用光谱电化学方法研究了纳米TiO₂多孔薄膜电极的平带电势,获得了薄膜厚度以及TiCl₄处理对纳米TiO₂薄膜电极平带电势的影响情况,并研究了平带电势对染料敏化太阳电池光伏性能的影响.结果表明,可以通过检测纳米TiO₂电极平带电势的变化趋势来反映电池中TiO₂电极平带电势的变化趋势.随着TiO₂电极膜厚的增加,其平带电势将向正方向移动,导致对应电池的开路电压随之减小.另外,经 关键词： 平带电势 2')" href="#">纳米TiO₂ 染料敏化 太阳电池     

ZnO-treated TiO2 inverse opal electrodes for dye-sensitized solar cells

We report that the photovoltaic properties of inverse opal TiO₂ (io-TiO₂) electrodes in dye-sensitized solar cells can be enhanced by ZnO treatment of the inverse opal structures. ZnO was coated on the surface of io-TiO₂ via the sol–gel reaction of ZnO precursors. Energy dispersive X-ray spectroscopy (EDX) measurements showed that the amount of ZnO on the io-TiO₂ surface was measured to be 0.12–0.50 wt% of zinc, depending on the number of coatings. Compared to bare inverse opal electrodes, the energy conversion efficiency of cells increased for the 0.35 wt% ZnO-coated electrodes, and then decreased for the 0.50 wt% ZnO-coated electrodes. The maximum efficiency of 5.3% was achieved, corresponding to a 23% increase in efficiency compared with bare io-TiO₂ electrodes. The enhanced efficiency was mainly attributed to the improvement of the open-circuit voltage (V_OC). EIS and dark current measurements confirmed that this enhancement in V_OC was due to the movement of the conduction band edge in a negative direction after ZnO treatment, rather than the formation of a barrier layer for electron recombination.     

Dye-sensitized solar cells based on ZnO nanowire array/TiO2 nanoparticle composite photoelectrodes with controllable nanowire aspect ratio

The ZnO nanowire (NW) array/TiO₂ nanoparticle (NP) composite photoelectrode with controllable NW aspect ratio has been grown from aqueous solutions for the fabrication of dye-sensitized solar cells (DSSCs), which combines the advantages of the rapid electron transport in ZnO NW array and the high surface area of TiO₂ NPs. The results indicate that the composite photoelectrode achieves higher overall photoelectrical conversion efficiency (η) than the ZnO NW alone. As a result, DSSCs based on the ZnO NW array/TiO₂ NP composite photoelectrodes get the enhanced photoelectrical conversion efficiency, and the highest η is also achieved by rational tuning the aspect ratio of ZnO NWs. With the proper aspect ratio (ca. 6) of ZnO NW, the ZnO NW array/TiO₂ NP composite DSSC exhibits the highest conversion efficiency (5.5 %). It is elucidated by the dye adsorption amount and interfacial electron transport of DSSCs with the ZnO NW array/TiO₂ NP composite photoelectrode, which is quantitatively characterized using the UV-Vis absorption spectra and electrochemical impedance spectra. It is evident that the DSSC with the proper aspect ratio of ZnO NW displays the high dye adsorption amount and fastest interfacial electron transfer.     

One-pot,large-scale synthesis silica-encapsulated NIR alloy quantum dots CdSeTe within short time

Hydrothermal process has been employed to synthesize titanium oxide (TiO₂) bottle brush. The nanostructured bottle brushes with tetragonal nanorods of ~75 nm diameter have been synthesized by changing the nature of the precursors and hydrothermal processing parameters. The morphological features and structural properties of TiO₂ films were investigated by field emission scanning electron microscopy, X-ray diffraction, high-resolution transmission electron spectroscopy, Fourier transform Raman spectroscopy, and X-ray photoelectron spectroscopy. The influence of such nanostructures on the performance of dye-sensitized solar cells (DSSCs) is investigated in detail. The interface and transient properties of these nanorods and bottle brush-based photoanodes in DSSCs were analyzed by electrochemical impedance spectroscopic measurements in order to understand the critical factors contributing to such high power conversion efficiency. Surface area of sample was recorded using Brunauer–Emmett–Teller measurements. It is found that bottle brush provides effective large surface area 89.34 m² g^?1 which is much higher than TiO₂ nanorods 63.7 m² g^?1. Such effective surface area can facilitate the effective light harvesting, and hence improves the dye adsorption and the photovoltaic performance of DSSCs, typically in short-circuit photocurrent and power conversion efficiency. A best power conversion efficiency of 6.63 % has been achieved. We believe that the present device performance would have wide interests in dye-sensitized solar cell research.     

Characterization techniques of sandwich-type TiO2/QD composites for low-cost quantum dots' solar cell

There is a high impact of the solar cells on energy manufacturing. For several years the energy efficiency was limited due to base-materials' structural and technological limits. High increase of energy harvesting of solar cells has been observed since the first solar cell based on dye-sensitized colloidal TiO₂ films occurred. One of the most promising solutions are used quantum dots (QD) for light energy conversion. In this paper, we described the use of selected characterization techniques for sandwich-type TiO₂/QD composites for a low-cost quantum dots' solar cell in the point of view of mass manufacturer of solar cells and research and development laboratory. Moreover, the increasing role of Raman spectroscopy and mapping for the TiO₂/QD was presented and compared with other necessity techniques for solar cell investigations such as ellipsometry, atomic force microscopy (AFM), and secondary ion mass spectrometry (SIMS).     

Effects of Gd<Superscript>3+</Superscript> modifications on the photoelectrochemical properties of TiO<Subscript>2</Subscript>-based dye-sensitized solar cells

In this paper, TiO₂ particles (~30 nm) modified with Gd₂O₃-coating layer (~2 nm) for dye-sensitized solar cells (DSSCs) were fabricated via the hydrothermal method. Among the solar cells based on the Gd³⁺-doped TiO₂ photoanodes, the optimal conversion efficiency was obtained from the 0.025Gd³⁺-modified TiO₂-based cell, with a 17.7% improvement in the efficiency as compared to the unmodified one (7.18%). This enhancement was probably due to the improved UV radiation harvesting via a down-conversion luminescence process by Gd³⁺ ions, enhancement of visible light absorption and improved dye loading capacity. In addition, after Gd modification, a thin coating could be formed on the TiO₂ nanoparticles, which worked as an energy barrier and resulted in a lower charge recombination.     

Enhanced efficiency of dye-sensitized solar cells by UV–O3 treatment of TiO2 layer

Solar conversion efficiency of dye-sensitized solar cells was improved by UV–O₃ treatment of TiO₂ before and/or after sintering. The enhancement was resulted from the removal of the residual organics originated from the TiO₂ precursor pastes, increased adsorption of dyes to the TiO₂, surface, and longer diffusion length and shorter electron transit time of electrons through the TiO₂ mesoscopic structure. The power conversion efficiency of the cells reaches to 7.2% with the open circuit voltage of 0.71 V, the short circuit current density of 15.2 mA/cm² and the fill factor of 0.67 under illumination with AM 1.5 (100 mW/cm²) simulated sunlight.     

TiO2 Wedgy Nanotubes Array Flims for Photovoltaic Enhancement

In this study, TiO₂ wedgy nanotubes with rectangular cross-sections were fabricated on transparent conductive substrates by using TiO₂ nanorods as the precursor via the anisotropic etching route. TiO2 nanotubes with V-shaped hollow structure and the special crystal plane exposed on the tube wall possess nature of high surface area for more dye molecules absorption, and the strong light scattering effects and dual-channel for effective electron transport of the TiO₂ V-shaped nanotubes based dye-sensitized solar cell exhibit a remarkable photovoltaic enhancement compared with the TiO₂ nanorods. The photoanode based on our V-shaped TiO₂ nanotubes with a length of 1.5 μm show a 123% increase of the dye loading and a 182% improvement in the overall conversion efficiency when compared with 4 μm rutile TiO₂ nanorods photoanode.     

Interface modification of MoS2 counter electrode/electrolyte in dye-sensitized solar cells by incorporating TiO2 nanoparticles

To achieve the high efficiency in dye-sensitized solar cells (DSSCs), the interface modification of MoS₂ counter electrode (CE)/electrolyte should be carried out. Making the modified MoS₂ CE by incorporating TiO₂ nanoparticles provides possibilities to enhance electrocatalytic activity. The DSSCs with the MoS₂/TiO₂ CE show enhanced performance compared with DSSCs with the MoS₂ CE. The experimental results revealed that the MoS₂/TiO₂ nanocomposite influences on the power conversion efficiency by enhancing electrocatalytic activity and increasing the active surface area that serve to increase the short circuit current. This understanding can provide guidance for the development of highly efficient DSSCs with platinum-free CEs.     

Thickness effect of the TiO2 nanofiber scattering layer on the performance of the TiO2 nanoparticle/TiO2 nanofiber-structured dye-sensitized solar cells

TiO₂ nanofibers (NFs) were fabricated by an electrospinning process and were used as scattering layers in dye-sensitized solar cells (DSSCs). The NF-coated photoanodes of the DSSCs were prepared with a variety of scattering layer thicknesses. The thickness effect of the scattering layer on the double-layered TiO₂ nanoparticle (NP)/TiO₂ NF structure was investigated through structural, morphological, and optical measurements. In the double-layered photoanode, the TiO₂ NP layer plays a major role in dye adsorption and light transmission, and the TiO₂ NF scattering layer improves the absorption of visible light due to the light scattering effects. The scattering effect of TiO₂ NFs layer was examined by the incident monochromatic photon-to-electron conversion efficiency (IPCE) and UV–Vis spectrometry. The conversion efficiency for the 12 μm-thick photoanode composed of a 2 μm-thick TiO₂ NF layer and 10 μm-thick TiO₂ NP layer was higher than that of DSSCs with only TiO₂ NPs photoanode by approximately 33%.     

Chemical reactions in TiO2/SnO2/TiCl4 hybrid electrodes and their impacts to power conversion efficiency of dye-sensitized solar cells

This study examined the applicability of TiO₂/SnO₂/TiCl₄ hybrid electrodes in dye-sensitized solar cells (DSSCs) by combining chemical modeling with experimentation. The interfacial chemical reactions in a TiO₂/SnO₂/TiCl₄ system were simulated using a thermochemistry software package, which led to the design and testing of hybrid working electrodes. Chemical thermodynamic modeling proved that TiCl₄ is an effective agent in removing Tiⁿ⁺ (n<4) and Sn^m+ (m<4) ion impurities from dry-mixed TiO₂/SnO₂ composite particles. Our results demonstrate that the power conversion efficiency of DSSC with a TiO₂/SnO₂/TiCl₄ hybrid electrode exceeds that of the conventional DSSC with a TiO₂ electrode due to the effects of light-scattering and the formation of additional absorbance (SnCl₂), which is an unexpected side effect of TiCl₄ treatment enabling the absorption of visible light. The proposed approach is ideally suited to establishing relationships between chemistry theory and the structure and performance of advanced DSSCs as well as photo-electro-chemical systems.