Effect of ZnO nanoparticles filler concentration on the properties of PEO-ENR50-LiCF<Subscript>3</Subscript>SO<Subscript>3</Subscript> solid polymeric electrolyte

A solid polymer electrolyte comprising blend of poly(ethylene oxide) and 50% epoxidized natural rubber (ENR50) as a polymer host, LiCF₃SO₃ as a salt and nanoparticle ZnO as an inorganic filler was prepared by solution-casting technique. The effect of filler on the electrolyte properties was characterized and analysed. FESEM analysis showed that the filler was well distributed in the polymer matrix, while the effective interaction between the salt and the polymer host was reduced by the addition of filler. As evidenced by FTIR analysis, which showed the formation of triplet peak at C-O-C stretching region. Ionic conductivity was found to decrease from 1.4 × 10⁻⁴ Scm⁻¹ to 2.5 × 10⁻⁶ Scm⁻¹ upon the addition of filler, due to the blocking effect of filler into the electrolyte conduction pathways. The temperature dependence on the electrolyte conductivity obeys Arrhenius rule in two temperature regions.     

Structural and ionic conductivity studies on proton conducting polymer electrolyte based on polyvinyl alcohol

An attempt has been made to prepare a new proton conducting polymer electrolyte based on polyvinyl alcohol (PVA) doped with NH₄NO₃ by solution casting technique. The complex formation between polymer and dissociated salt has been confirmed by X-ray diffraction analysis. The ionic conductivity of the prepared polymer electrolyte has been found by ac impedance spectroscopic analysis. The highest ionic conductivity has been found to be 7.5 × 10⁻³ Scm⁻¹ at ambient temperature for 20 mol% NH₄NO₃-doped PVA with low activation energy (~0.19 eV). The temperature-dependent conductivity of the polymer electrolyte follows an Arrhenius relationship, which shows hopping of ions in the polymer matrix.     

Morphology,chemical interaction,and conductivity of a PEO-ENR50 based on solid polymer electrolyte

A solid polymer electrolytes (SPE) comprising blend of poly(ethylene oxide; PEO) and epoxidized natural rubber as a polymer host and LiCF₃SO₃ as a dopant were prepared by solution-casting technique. The SPE films were characterized by field emission scanning electron microscopy to determine the surface morphology, X-ray diffraction, and differential scanning calorimeter to determine the crystallinity and thermogravimetric analysis to confirm the mass decrease caused by loss of the solvent. While the presence of the complexes was investigated by reflection Fourier transform infrared (ATR-FTIR) spectroscopy. Electrochemical impedance spectroscopy was conducted to obtain ionic conductivity. Scanning electron microscopy analysis showed that a rough surface morphology of SPE became smoother with addition of salt, while ATR-FTIR spectroscopy analysis confirmed the polymer salt complex formation. The interaction occurred between the salt, and ether group of polymer host where the triple peaks of ether group in PEO merged and formed one strong peak at 1,096 cm⁻¹. Ionic conductivity was found to increase with the increase of salt concentration in the polymer blend complexes. The highest conductivity achieved was 1.4 × 10⁻⁴ Scm⁻¹ at 20 wt.% of LiCF₃SO₃, and this composition exhibited an Arrhenius-like behavior with the activation energy of 0.42 eV and the preexponential factor of 1.6 × 10³ Scm⁻¹.     

Preparation and characterizations of PVAc/P(VdF-HFP)-based polymer blend electrolytes

A novel group of polymer blend electrolytes based on the mixture of poly(vinyl acetate) (PVAc), poly(vinylidene fluoride-hexafluoropropylene) (PVdF-HFP), and the lithium salt (LiClO₄) are prepared by solvent casting technique. Ionic conductivity of the polymer blend electrolytes has been investigated by varying the PVAc and PVdF-HFP content in the polymer matrix. The maximum ionic conductivity has been obtained as 0.527 × 10⁻⁴ Scm⁻¹ at 303 K for PVAc/PVdF-HFP ((25/75) wt.%)/LiClO₄ (8 wt.%). The complex formations ascertained from XRD and FTIR spectroscopic techniques and the thermal behavior of the prepared samples has been performed by DSC analysis. The surface morphology and the surface roughness are studied using SEM and AFM scanning techniques respectively.     

Electrical conductivity studies on PVA/PVP-KOH alkaline solid polymer blend electrolyte

A series of conducting thin-film solid electrolytes based on poly (vinyl alcohol)/ poly (vinyl pyrrolidone) (PVA/PVP) polymer blend was prepared by the solution casting technique. PVA and PVP were mixed in various weight percent ratios and dissolved in 20 ml of distilled water. The samples were analyzed by using impedance spectroscopy in the frequency range between 100 Hz and 1 MHz. The PVA/PVP system with a composition of 80% PVA and 20 wt.% PVP exhibits the highest conductivity of (2.2±1.4) × 10⁻⁷ Scm⁻¹. The highest conducting PVA/PVP blend was then further studied by adding different amounts of potassium hydroxide (KOH) ionic dopant. Water has been used as solvent to prepare PVA/PVP-KOH based alkaline solid polymer blend electrolyte films. The conductivity was enhanced to (1.5 ± 1.1) × 10⁻⁴ Scm⁻¹ when 40 wt.% KOH was added. Paper presented at the International Conference on Functional Materials and Devices 2005, Kuala Lumpur, Malaysia, June 6 – 8, 2005.     

Combined effect of CuO nanofillers and DBP plasticizer on ionic conductivity enhancement in the solid polymer electrolyte PEO–LiCF<Subscript>3</Subscript>SO<Subscript>3</Subscript>

We report a new kind of polyethylene oxide, PEO–LiCF₃SO₃-based composite polymer electrolyte, containing active copper oxide (CuO) nanoparticles with dibutyl phthalate (DBP) prepared by solution-cast technique. The incorporation of 10 wt.% DBP and 5 wt.% CuO to the salted polymer showed a significant conductivity enhancement with maximum conductivity 2.62 × 10⁻⁴ Scm⁻¹ at room temperature. This could be attributed to the increasing of amorphous phase content and structural changes in the polymer electrolyte. Arrhenius plot suggest that temperature-dependent conductivity is a thermally activated process.     

Ionic conductivity studies on LiSmO<Subscript>2</Subscript> by impedance spectroscopy

Lithium samarium oxide has been prepared by solid-state reaction method and characterized by X-ray diffraction (XRD) and impedance spectroscopy. XRD pattern of the sample reveals the formation of the sample. The conductivity studies, dielectric studies, and modulus analysis of the samples have been carried out for different temperatures. The bulk conductivity of the sample has been found to be 1.21 × 10⁻⁵ Scm⁻¹ at 420 °C. The temperature variation of the direct current conductivity obeys the Arrhenius relation. The modulus analysis of the sample indicates the non-Debye nature of the sample which corresponds to long-time slow polarization and relaxation of hopping charges.     

Ionic transport, thermal, XRD, and phase morphological studies on LiCF3SO3-based PVC–PVdF gel electrolytes

The plasticized polymer electrolyte composed of polyvinylchloride (PVC) and polyvinylidene fluoride (PVdF) as host polymer, the mixture of ethylene carbonate and propylene carbonate as plasticizer, and LiCF₃SO₃ as a salt was studied. The effect of the PVC-to-PVdF blend ratio with the fixed plasticizer and salt content on the ionic conduction was investigated. The electrolyte films reveal a phase-separated morphology due to immiscibility of the PVC with plasticizer. Among the three blend ratios studied, 3:7 PVC–PVdF blend ratio has shown enhanced ionic conductivity of 1.47 × 10⁻⁵ S cm⁻¹ at ambient temperature, i.e., the ionic conductivity decreased with increasing PVC-to-PVdF ratio and increased with increasing temperature. A temperature dependency on ionic conductivity obeys the Arrhenius behavior. The melting endotherms corresponding to vinylidene (VdF) crystalline phases are observed in thermal analysis. Thermal study reveals the different levels of uptake of plasticizer by VdF crystallites. The decrease in amorphousity with increase in PVC in X-ray diffraction studies and larger pore size appearance for higher content of PVC in scanning electron microscopy images support the ionic conductivity variations with increase in blend ratios.     

Effects of gamma radiation treatment and plasticizer on alkaline solid polymer electrolytes

Alkaline solid polymer electrolyte films have been prepared by the solvent-casting method. Gamma radiation treatment and propylene carbonate plastisizer were used to improve the ionic conductivity of the electrolytes at ambient temperature. The structure of the irradiated electrolytes changes from semi-crystalline to amorphous, indicating that the crosslinking of the polymer has been achieved at a dose of 200 kGy. The ionic conductivity at room temperature of PVA/KOH blend increases from 10⁻⁷ to 10⁻³ Scm⁻¹ after the PVA crosslinking and when the plasticizer concentration was increased from 20 to 30%. Paper presented at the International Conference on Functional Materials and Devices 2005, Kuala Lumpur, Malaysia, June 6 – 8, 2005.     

Impact of ethylene carbonate on electrical properties of PVA/(NH4)2SO4/H2SO4 proton-conductive membrane

A new proton-conductive membrane (PCM) based on poly (vinyl alcohol) and ammonium sulfate (NH₄)₂SO₄ complexed with sulfuric acid and plasticized with ethylene carbonate (EC) at different weight percent were prepared by casting technique. The structural properties of these electrolyte films were examined by XRD studies. The XRD patterns of all the prepared polymer electrolytes reveal the amorphous nature of the films. ac conductivity and dielectric spectra of the electrolyte were studied with changing EC content from weight 0.00 to 0.75 g. A maximum conductivity of 7.3 × 10⁻⁵ S cm⁻¹ has been achieved at ambient temperature for PCM containing 0.25 g of ethylene carbonate. The electrical conductivity σ, dielectric constant ε′ and dielectric loss ε″ of PCM in frequency range (100 Hz to 100 KHz), and temperature range (300–400 K) were carried out. Measurement of transference number was carried out to investigate the nature of charge transport in these polymer electrolyte films using Wagner’s polarization technique. Transport number data showed that the charge transport in these polymer electrolyte systems was predominantly due to ions. The electrolyte with the highest electrical conductivity was used in the fabrication of a solid-state electrochemical cell with the configuration (Mg/PCM/PbO₂). Various cell parameters ldensity, and current density were determined. The fabricated cells gave capacity of 650 μAh and have an internal resistance of 11.6 kΩ.     

Synthesis and impedance analysis of proton-conducting polymer electrolyte PVA:NH4F

An attempt has been made to prepare a new proton-conducting polymer electrolyte based on poly(vinyl alcohol) doped with ammonium fluoride (NH₄F) by solution casting technique. The complex formation between polymer and dissociated salt has been confirmed by X-ray diffraction and Fourier transform infrared spectroscopy studies. The highest ionic conductivity has been found to be 6.9?×?10^?6?Scm^?1 at ambient temperature (303 K) for 85PVA:15NH₄F polymer electrolyte. The conductance spectra contain a low frequency plateau region and high frequency dispersion region. The dielectric spectra exhibit the low frequency dispersion, which is due to space charge accumulation at the electrode–electrolyte interface. The modulus spectra indicate non-Debye nature of the material. The highest ionic conductivity polymer electrolyte 85PVA:15NH₄F has low activation energy 0.2 eV among the prepared polymer electrolytes.     

Space-charge relaxation and electrical conduction in?K0.5Na0.5NbO3 at high temperatures

Sodium potassium niobate K_0.5Na_0.5NbO₃(KNN) ceramic was synthesized by a solid-state technique. The X-ray diffraction of the sample at room temperature showed a monoclinic phase. The real part (ε′) and imaginary part (ε″) of dielectric permittivity of the sample were measured in a frequency range from 40 Hz to 1 MHz and in a temperature range from 350 to 850 K. The ε′ deviated from Curie–Weiss law above 702 K, due to additional dielectric contributions resulting from universal dielectric response and thermally activated space charges at high temperatures. This anomaly arose from a Debye dielectric dispersion that slowed down following an Arrhenius law. We have established a link between the dielectric relaxation and the conductivity.     

Ionic conductivity studies of 49% poly(methyl methacrylate)-grafted natural rubber-based solid polymer electrolytes

The potential of 49% poly(methyl methacrylate)-grafted natural rubber (MG49) as a solid polymer electrolyte film in rechargeable batteries system were explored. The flat, thin, and flexible films were prepared by solution casting technique. The ionic conductivity was investigated by alternating current impedance spectroscopy. The highest conductivity of 2.3 × 10⁻⁷ Scm⁻¹ was obtained at 20wt.% of LiBF₄ salts content, while 4.0 × 10⁻⁸ Scm⁻¹ was obtained at 15wt.% LiClO₄ salts loading. The observation on structure performed by X-ray diffraction shows the highest conductivity appears at amorphous phase.     

Conductivity studies of starch-based polymer electrolytes

A proton-conducting polymer electrolyte based on starch and ammonium nitrate (NH₄NO₃) has been prepared through solution casting method. Ionic conductivity for the system was conducted over a wide range of frequency between 50 Hz and 1 MHz and at temperatures between 303 K and 373 K. Impedance analysis shows that sample with 25 wt.% NH₄NO₃ has a smaller bulk resistance (R _b) compared to that of the pure sample. The amount of NH₄NO₃ was found to influence the proton conduction; the highest obtainable room temperature conductivity was 2.83 × 10⁻⁵ S cm⁻¹, while at 100 °C, the conductivity in found to be 2.09 × 10⁻⁴ S cm⁻¹. The dielectric analysis demonstrates a non-Debye behavior. Transport parameters of the samples were calculated using the Rice and Roth model and thus shows that the increase in conductivity is due to the increase in the number of mobile ions.     

Li ion conduction on plasticizer-added PVAc-based hybrid polymer electrolytes

Poly(vinyl acetate), poly(vinylidene fluoride–hexafluoropropylene), lithium perchlorate salt, and the different plasticizer-based gel polymer electrolytes were prepared by solvent-casting technique. The structural and the complex formation have been confirmed by X-ray diffraction spectroscopic analysis. Thermal stability of the different plasticizer-added electrolyte films has been analyzed by means of thermogravimetric analysis. Ionic conductivity of the electrolyte samples has been found as a function of temperature and the plasticizers. Among the various plasticizers, ethylene carbonate-based complexes exhibit maximum ionic conductivity value of the order of 10⁻⁴ Scm⁻¹. Finally, the microstructure of the maximum ionic conductivity sample has been depicted with the help of scanning electron microscope analysis.     

Structural, vibrational, thermal, and conductivity studies on proton-conducting polymer electrolyte based on poly (N-vinylpyrrolidone)

The proton-conducting polymer electrolytes based on poly (N-vinylpyrrolidone) (PVP), doped with ammonium chloride (NH₄Cl) in different molar ratios, have been prepared by solution-casting technique using distilled water as solvent. The increase in amorphous nature of the polymer electrolytes has been confirmed by XRD analysis. The FTIR analysis confirms the complex formation of the polymer with the salt. A shift in glass transition temperature (T _g) of the PVP/NH₄Cl electrolytes has been observed from the DSC thermograms which indicates the interaction between the polymer and the salt. From the AC impedance spectroscopic analysis, the ionic conductivity of 15?mol% NH₄Cl-doped PVP polymer complex has been found to be maximum of the order of 2.51?×?10^?5?Scm^?1 at room temperature. The dependence of T _g and conductivity upon salt concentration has been discussed. The linear variation of the proton conductivity of the polymer electrolytes with increasing temperature suggests the Arrhenius type thermally activated process. The activation energy calculated from the Arrhenius plot for all compositions of PVP doped with NH₄Cl has been found to vary from 0.49 to 0.92?eV. The dielectric loss curves for the sample 85?mol% PVP:15?mol% NH₄Cl reveal the low-frequency ?? relaxation peak pronounced at high temperature, and it may be caused by side group dipoles. The relaxation parameters of the electrolytes have been obtained by the study of Tan?? as a function of frequency.     

Dielectric behaviour of ketone-amine binary mixtures at microwave frequencies

Values of dielectric constant (ε′) and loss factor (ε″) have been experimentally determined for binary liquid mixtures of ethyl methyl ketone+ethylenediamine and methyl isobutyl ketone+ethylenediamine at 9.44 GHz microwave frequencies at 30°C. The values ofε′ andε″ have been used to evaluate the molar polarization, apparent polarization and the excess permittivities. Excess refractive index, viscosity and activation energy of viscous flow have also been estimated. These parameters have been used to explain the formation of 1:1 complexes for both the systems.     

Vibrational and impedance spectroscopic analysis of poly(vinyl alcohol)-based solid polymer electrolytes

Solid polymer electrolytes based on poly(vinyl alcohol) (PVA) doped with NH₄Br have been prepared by the solution-casting method. The complex formation between the polymer and the salt has been confirmed by Fourier transform infrared spectroscopy. The highest conductivity at 303 K has been found to be of the order of 10⁻⁴ Scm⁻¹ for 25 mol% NH₄Br-doped PVA system. The ionic transference number of polymer electrolyte has been estimated by Wagner’s polarization method, and the results reveal that the conducting species are predominantly ions. Paper presented at the Third International Conference on Ionic Devices (ICID 2006), Chennai, Tamilnadu, India, Dec. 7–9, 2006.     

Vibrational spectroscopic and electrochemical characteristics of poly (propylene glycol)-silver triflate polymer electrolyte system

Fourier transform infrared spectroscopic and electrochemical complex impedance studies have been carried out on a series of complexes containing poly(propylene glycol) of molecular weight 4,000 and silver triflate (AgCF₃SO₃) salt corresponding to the ether oxygen to metal cation ratios (O : M) in the range 16:1 to 12:1. The formation of ion pairs and aggregates noticed in the case of specimens having high salt concentrations as well as the complete coordination of the cation with the ether oxygen at low salt concentrations within the PPG4000-AgCF₃SO₃ polymer electrolyte system have been confirmed. The appearance of two weak triflate bands at 1,032 and 1,272 cm⁻¹ in the absorption spectra in respect of low salt concentrations is indicative of the fact that triflate ions are free within the polymer matrix. The room temperature (298 K) electrical conductivity is found to increase with increasing ether oxygen content while exhibiting the maximum value of 7.1 × 10⁻⁵ Scm⁻¹ possibly due to silver ionic transport in the case of the typical composition having an O : M ratio of 16:1.     

AC impedance studies on proton conducting polymer electrolyte complexes (PVA+CH3COONH4)

A proton conducting polymer electrolytes of pure polyvinyl alcohol and polyvinyl alcohol complexed with ammonium acetate having different compositions have been prepared by solution cast technique. FTIR spectrum confirms the complexation process. The conductivity of the pure polyvinyl alcohol is in the order 10⁻¹⁰ S/cm at ambient temperature and its value increases 10⁴ times when complexed with 20% ammonium acetate. The Arrhenius plot for all electrolyte shows two different regions above and below the glass transition temperature. A high dielectric loss value is observed for the case of complexed PVA in comparison to pure PVA. Based on the study of relaxation spectra, it is found that the relaxation time decreases with increase in temperature and dopant concentration. Paper presented at the 2nd International Conference on Ionic Devices, Anna University, Chennai, India, Nov. 28–30, 2003.