QCM-DNA biosensor based on plasma modified PT/TiO2 nanocomposites

A quartz crystal microbalance DNA biosensor based on plasma prepared polythiophene /titanium dioxide (PT/TiO₂) nanocomposite was developed for the detection of genetically modified organisms (GMOs). DNA hybridization was studied by quartz crystal microbalance (QCM) and cyclic voltammetry (CV) measurements. Single stranded DNA probes were immobilized on the PT/TiO₂ coated quartz crystal electrode and the hybridization between the immobilized probe and the target complementary sequence in solution was monitored. The developed QCM-DNA biosensor represented promising results for a real-time, label-free, direct detection of DNA samples for the screening of genetically modified organisms.     

Electrochemical DNA Sensor Using Ferrocenyl Naphthalene Diimide Ligand

Searching for the method for gene detection is vitally important with the development of genetic diagnosis. Generally gene detection is carried out by the judgment of existence of signal of DNA probe (labeled complementary sequence) bound to target DNA sequence. Since sample DNA is immobilized on the solid support, non-bound DNA probe is washed out from the support.     

Nucleic acid immobilized polypyrrole–polyvinylsulphonate film for Mycobacterium tuberculosis detection

21-mer peptide acid nucleic acid (PNA) probe specific to 16s–23s rRNA spacer region of Mycobacterium tuberculosis has been covalently immobilized on polypyrrole–polyvinylsulphonate film electro-chemically deposited onto indium-tin-oxide (ITO) glass for detection of complementary target by monitoring guanine oxidation and redox indicators (methylene blue and ruthenium complex) up to 0.1 fmole, 0.1 attomole and 1.0 pmole, respectively within 30 s of hybridization time. The peptide nucleic acid immobilized polypyrrole–polyvinylsulphonate electrode can be used for hybridization detection with complementary sequence in heat-shocked genomic DNA and in serum samples containing genomic M. tuberculosis DNA up to 2.5 pg/μl within about 60 min at 30 °C and can be used 8–9 times.     

Nucleic acid sensor for M. tuberculosis detection based on surface plasmon resonance

Cysteine modified NH(2)-end peptide nucleic acid (PNA) (24-mer) probe and 5'-thiol end labeled deoxyribonucleic acid (DNA) probes specific to Mycobacterium tuberculosis have been immobilized onto BK-7 gold coated glass plates for the detection of complementary, one-base mismatch, non-complementary targets and complementary target sequence in genomic DNA of Mycobacterium tuberculosis using a surface plasmon resonance (SPR) technique. The DNA/Au and PNA/Au bio-electrodes have been characterized using contact angle, atomic force microscopy (AFM), electrochemical impedance spectroscopy (EIS) and cyclic voltammetric (CV) techniques, respectively. It is revealed that there is a 252 millidegrees SPR angle change in the case of PNA immobilization and 205 millidegrees for DNA immobilization, indicating increased amount of immobilized PNA molecules. Hybridization studies reveal that there is no binding of the non-complementary target to DNA/Au and PNA/Au electrode. Compared to the DNA/Au bioelectrode, PNA/Au electrode has been found to be more efficient for detection of one-base mismatch sequence. The PNA/Au bioelectrode shows better detection limit (1.0 ng ml(-1)) over the DNA-Au bioelectrode (3.0 ng ml(-1)). The values of the association (k(a)) and dissociation rate constant (k(d)) for the complementary sequence in case of the PNA/Au bioelectrode have been estimated as 8.5 x 10(4) m(-1) s(-1) and 3.6 x 10(-3) s(-1), respectively.     

Direct selective detection of genomic DNA from coliform using a fiber optic biosensor

Fiber optic biosensors operated in a total internal reflection format were prepared based on covalent immobilization of 25mer lacZ single-stranded nucleic acid probe. Genomic DNA from Escherichia coli was extracted and then sheared by sonication to prepare fragments of approximately 300mer length. Other targets included a 25mer fully complementary lacZ sequence, 100mer polymerase chain reaction (PCR) products containing the lacZ sequence at various locations, and non-complementary DNA including genomic samples from salmon sperm. Non-selective adsorption of non-complementary oligonucleotides (ncDNA) was found to occur at a significantly faster rate than hybridization of complementary oligomers (cDNA) in all cases. The presence of ncDNA oligonucleotides did not inhibit selective interactions between immobilized DNA and cDNA in solution. The presence of high concentrations of non-complementary genomic DNA had little effect on extent or speed of hybridization of complementary oligonucleotides. Detection of genomic fragments containing the lacZ sequence was possible in as little as 20 s by observation of the steady-state fluorescence intensity increase or by time-dependent rate of fluorescence intensity changes.     

基于金胶的选择性聚集实现p53基因的电化学超灵敏检测

介绍了一种利用金胶的选择性聚集实现信号扩增的超灵敏的电化学方法, 用于人类p53肿瘤抑制剂基因的检测. 在实验中, 根据p53基因的序列设计了能特异性检测p53肿瘤抑制剂基因的二段探针, 在一段探针上固定磁性颗粒以捕获并富集目标基因, 同时在另一段探针上标记金纳米颗粒作为检测信标. 另外, 通过硫代三聚氰酸和金纳米颗粒的自组装作用, 形成金纳米颗粒和硫代三聚氰酸的网状结构, 获得金纳米颗粒的选择性聚集, 实现信号扩增. 用此法检测目标p53野生型DNA, 最低检测限为2.24×10-17 mol/L, 同时进一步研究了该探针对p53野生型和一碱基错配的突变型的选择性.     

Tethered thiazole orange intercalating dye for development of fibre-optic nucleic acid biosensors

Single-stranded DNA (ssDNA) oligonucleotide in solution, or that is immobilized onto a surface to create a biosensor, can be used as a selective probe to bind to a complementary single-stranded sequence. Fluorescence enhancement of thiazole orange (TO) occurs when the dye intercalates into double-stranded DNA (dsDNA). TO dye has been covalently attached to probe oligonucleotides (homopolymer and mixed base 10mer and 20mer) through the 5′ terminal phosphate group using polyethylene glycol linker. The tethered TO dye was able to intercalate when dsDNA formed in solution, and also at fused silica surfaces using immobilized ssDNA. The results indicated the potential for development of a self-contained biosensor where the fluorescent label was available as part of the immobilized oligonucleotide probe chemistry. The approach was shown to be able to operate in a reversible manner for multiple cycles of detection of targeted DNA sequences.     

Preparation of Luminol-doped Nanoparticle and Its Application in DNA Hybridization Analysis

Introduction The analysis of DNA sequence and DNA mutant detection play fundamental roles in the rapid development of molecular diagnostics and in the anticancer drug screening. Therefor many detection techniques of DNA sequence have been developed in recent years. These techniques mainly depend on the nucleic acid hybridization1 and their sensitivities are related to the specific activity of the label linked to the DNA probe. The degree of hybridization of probe to its complementary DN…     

Highly Sensitive Indicator‐Free Impedance Sensing of DNA Hybridization Based on Poly(m‐aminobenzenesulfonic acid)/TiO2 Nanosheet Membranes with Pulse Potentiostatic Method Preparation

A direct electrochemical detection procedure for DNA hybridization by using the electrochemical signal changes of conductive poly(m‐aminobenzenesulfonic) acid (PABSA)/TiO₂ nanosheet membranes, which were electropolymerized by using the pulse potentiostatic method, is reported. Due to the unique properties of TiO₂ nanoparticles, m‐aminobenzenesulfonic acid monomers tend to be adsorbed around the particles, and the electropolymerization efficiency is greatly improved. The combination of TiO₂ nanoparticles and PABSA resulted in a nanocomposite membrane with unique and novel nanosheet morphology that provides more activation sites and enhances the surface electron‐transfer rate. These characteristics were propitious for the magnification of PABSA electrochemical signals and the direct detection of DNA hybridization. Owing to the presence of abundant sulfonic acid groups, PABSA could overcome the drawbacks of polyaniline and be used to detect bioanalytes at physiological pH. DNA probes could be covalently attached to the sulfonic groups through the amines of DNA sequences by using an acyl chloride cross‐linking reaction. After immobilization of probe DNA, the electrochemical impedance value increased significantly compared to that of PABSA/TiO₂ nanosheet membranes, and then decreased dramatically after the hybridization reaction of the probe DNA with the complementary DNA sequence compared to that of the probe‐immobilized electrode. Electrochemical impedance spectroscopy was adopted for indicator‐free DNA biosensing, which had an eminent ability for the recognition between double‐base mismatched sequences or non‐complementary DNA sequences and complementary DNA sequences. A gene fragment, which is related to one of the screening genes for the transgenically modified plants, the cauliflower mosaic virus 35S gene was satisfactorily detected. This is the first report for the indicator‐free impedance DNA hybridization detection by using PABSA/TiO₂ membranes under neutral conditions.     

Gold Nanoparticle-based Layer-by-Layer Enhancement of DNA Hybridization Electrochemical Signal at Carbon Nanotube Modified Carbon Paste Electrode

Nanoporous materials have been widely applied to biosensor investigation. Recently, Guo et al. have investigated the mesoporous materials modified carbon paste electrode for rapid cTnI (cardiac troponin I) detection with enhanced sensitivity1-3. However, …     

Non‐hybridization single nucleotide polymorphism detection and genotyping assay through direct discrimination of single base mutation by capillary electrophoretic separation of single‐stranded DNA

The significant demands for single nucleotide polymorphism detection and genotyping assays have grown. Most common assays are based on the recognition of the target sequence by the hybridization with its specific probe having the complementary sequence of the target. Herein, a simple, label‐free, and economical non‐hybridization assay was developed for single nucleotide polymorphism detection and genotyping, based on the direct discrimination of single base mutation by simple capillary electrophoresis separation for single‐stranded DNA in an acidic electrophoretic buffer solution containing urea. Capillary electrophoresis separation of single‐base sequential isomers of DNA was achieved due to charge differences resulting from the different protonation properties of the DNA bases. Single nucleotide polymorphism detection and genotyping were achieved by discriminating the electropherogram pattern change, that is, peak number in the electropherogram, obtained by the proposed method. The successful practical application of the proposed method was demonstrated through single nucleotide polymorphism detection and genotyping on a known gene region of 84‐mer, in which guanine to adenine single‐base mutation is commonly observed, using a human hair sample in combination with genomic DNA extraction, polymerase chain reaction amplification, DNA purification from polymerase chain reaction products, and capillary electrophoresis separation.     

Microfluidic nanoplasmonic-enabled device for multiplex DNA detection

We describe a rapid, quantitative, multiplex, self-labelled, and real-time DNA biosensor employing Ag nanoparticle-bound DNA hairpin probes immobilized in a microfluidic channel. Capture of complementary target DNAs by the microarrayed DNA hairpin probes results in a positive fluorescence signal via a conformational change of the probe molecules, signalling the presence of target DNAs. The device's capability for quantitative analyses was evaluated and a detection time as low as 6 min (with a target flow rate of 0.5 μl min(-1)) was sufficient to generate significant detection signals. This detection time translates to merely 3 μl of target solution consumption. An unoptimized sensitivity of 500 pM was demonstrated for this device.     

Electrochemical Detection of DNA Hybridization Based on the Probe Labeled with Carbon‐Nanotubes Loaded with Silver Nanoparticles

A sensitive electrochemical method for the detection of DNA hybridization based on the probe labeled with multiwall carbon‐nanotubes (MWNTs) loaded with silver nanoparticles (Ag‐MWNTs) has been developed. MWNTs were electroless‐plated with a large number of silver nanoparticles to form Ag‐MWNTs. Probe single strand DNA (ss‐DNA) with a thiol group at the 3′‐terminal labeled with Ag‐MWNTs by self‐assembled monolayer (SAM) technique was employed as an electrochemical probe. Target ss‐DNA with a thiol group was immobilized on a gold electrode by SAM technique and then hybridized with the electrochemical probe. Binding events were monitored by differential pulse voltammetric (DPV) signal of silver nanoparticles. The signal difference permitted to distinguish the match of two perfectly complementary DNA strands from the near perfect match where just three base pairs were mismatched. There was a linear relation between the peak current at +120 mV (vs. SCE) and complementary target ss‐DNA concentration over the range from 3.1×10^?14 to 1.0×10^?11 mol/L with a detection limit of 10 fmol/L of complementary target ss‐DNA. The proposed method has been successfully applied to detection of the DNA sequence related to cystic fibrosis. This work demonstrated that the MWNTs loaded with silver nanoparticles offers a great promising approach for sensitive detection of DNA hybridization.     

Indigo Carmine as New Label in PNA Biosensor for Detection of Short Sequence of p53 Tumor Suppressor Gene

A new electrochemical PNA hybridization biosensor for detection of a 15‐mer sequence unique to p53 using indigo carmine (IC) as an electrochemical detector is described in this work. This genosensor is based on the hybridization of target oligonucleotide with its complementary probe immobilized on the gold electrode by self‐assembled monolayer formation. Because this label is electroactive in acidic medium, the interaction between IC and short sequence of p53 is studied by differential pulse voltammety (DPV) in 0.1 M H₂SO₄. The results of electrochemical impedance spectroscopy and cyclic voltammetry in the solution of [Fe(CN)₆]^3?/4? shows no breakage in PNA‐DNA duplex. A decrease in the voltammetric peak currents of IC is observed upon hybridization of the probe with the target DNA. The influence of probe concentration on effective discrimination against non‐complementary oligonucleotides is investigated and a concentration of 10^?7 M is selected. The diagnostic performance of the PNA sensor is described and the detection limit is found to be 4.31×10^?12 M.     

Label-Free Electrochemiluminescent Determination of DNA Using Luminol and Hemin Functionalized Nanoparticles

Luminol and hemin dual-functionalized silica nanoparticles were synthesized using a typical reverse water-in-oil microemulsion protocol. The obtained nanoparticles were further characterized by transmission electron microscopy, scanning electron microscopy, atomic absorption spectrometry, chemiluminescence, and electrochemiluminescence. The results indicated that the luminol and hemin dual-functionalized silica nanoparticles exhibited significantly higher chemiluminescence and electrochemiluminescence intensities than those of luminol functionalized silica nanoparticles due to the catalytic effect of hemin on the chemiluminescence and electrochemiluminescence of luminol. Furthermore, a simple and sensitive label-free electrochemiluminescence DNA biosensor was developed based on the chitosan modified luminol and hemin dual-functionalized silica nanoparticles and a single-stranded DNA probe. The chitosan modified luminol and hemin dual-functionalized silica nanoparticles were immobilized on the surface of an indium-doped tin oxide electrode and the single-stranded DNA probe was immobilized on the surface of the nanoparticles through electrostatic interactions between single-stranded DNA and chitosan, which allowed hybridization with the target DNA sequences. The hybridization events were evaluated by electrochemiluminescence, and only the complementary sequence formed double-stranded DNA with the DNA probe to give strong electrochemiluminescence signals. Finally, the electrochemiluminescence intensity was found to be linearly related to the concentration of the complementary sequence at concentrations from 1.0?×?10^?12 to 1.0?×?10^?6?mol·L^?1 with a detection limit of 5.0?×?10^?13?mol·L^?1.     

Opto-electrochemical nanosensor array for remote DNA detection

A high-density array of opto-electrochemical nanosensors is presented for remote DNA detection. It was fabricated by chemical etching of a coherent optical fibre bundle to produce a nanotip array. The surface of the etched bundle was sputter-coated with a thin ITO layer which was eventually insulated by an electrophoretic paint. The fabrication steps produced a high-density array of electrochemical nanosensors which retains the optical fibre bundle architecture and its imaging properties. A DNA probe was then immobilized on the nanosensor array surface in a polypyrrole film by electropolymerisation. After hybridisation with the complementary sequence, detection of the strepavidin-R-phycoerythrin label is performed by fluorescence imaging through the optical fibre bundle itself. Control experiments and regeneration steps have also been successfully demonstrated on this nanostructured opto-electrochemical platform.     

Electrochemical DNA Hybridization Detection Using DNA Cleavage

We report the new method for detection of DNA hybridization using enzymatic cleavage. The strategy is based on that S1 nuclease is able to specifically cleave only single strand DNA, but not double strand DNA. The capture probe DNA, thiolated single strand DNA labeled with electroactive ferrocene group, was immobilized on a gold electrode. After hybridization of target DNA of complementary and noncomplementary sequences, nonhybridized single strand DNA was cleaved using S1 nuclease. The difference of enzymatic cleavage on the modified gold electrode was characterized by cyclic voltammetry and differential pulse voltammetry. We successfully applied this method to the sequence‐selective discrimination between perfectly matched and mismatched target DNA including a single‐base mismatched target DNA. Our method does not require either hybridization indicators or other exogenous signaling molecules which most of the electrochemical hybridization detection systems require.     

Functionalization of single-walled carbon nanotubes for direct and selective electrochemical detection of DNA

We report here a new strategy to graft both redox and DNA probes on carbon nanotubes to make a label-free DNA sensor. Oxidized single-walled carbon nanotubes are first immobilized on a self-assembled monolayer of cysteamine; then the redox probe, a quinone derivative 3-[(2-aminoethyl)sulfanyl-5-hydroxy-1,4-naphthoquinone], is grafted on the free carboxylic groups of the nanotubes. After that, for DNA probe grafting, new carboxylic sites are generated via an aryl diazonium route. After hybridization with a complementary sequence, the conformational changes of DNA could influence the redox kinetics of quinone, leading to a current increase of the redox signal, detected by square wave voltammetry. The system is selective, as it can discriminate a single mismatched sequence from the complementary one.     

Voltammetric determination of DNA hybridization using methylene blue and self-assembled alkanethiol monolayer on gold electrodes

An electrochemical DNA biosensor based on the recognition of single stranded DNA (ssDNA) by hybridization detection with immobilized complementary DNA oligonucleotides is presented. DNA and oligonucleotides were covalently attached through free amines on the DNA bases using N-hydroxysulfosuccinimide (NHS) and N-(3-dimethylamino)propyl-N′-ethylcarbodiimide hydrochloride (EDC) onto a carboxylate terminated alkanethiol self-assembled monolayers (SAM) preformed on a gold electrode (AuE). Differential pulse voltammetry (DPV) was used to investigate the surface coverage and molecular orientation of the immobilized DNA molecules. The covalently immobilized probe could selectively hybridize with the target DNA to form a hybrid on the surface despite the bases being attached to the SAM. The changes in the peak currents of methylene blue (MB), an electroactive label, were observed upon hybridization of probe with the target. Peak currents were found to increase in the following order: hybrid-modified AuE, mismatched hybrid-modified AuE, and the probe-modified AuE which indicates the MB signal is determined by the extent of exposed bases. Control experiments were performed using a non-complementary DNA sequence. The effect of the DNA target concentration on the hybridization signal was also studied. The interaction of MB with inosine substituted probes was investigated. Performance characteristics of the sensor are described.     

纳米探针芯片技术用于微量乙肝病毒DNA的检测

利用两组探针修饰的微粒:(1)表面标记有可与待测乙肝病毒(HBV) DNA另一端结合的纳米金探针1(信号探针)以及可与信号探针部分结合的纳米金探针2(检测探针);(2)表面标记有可与待测HBV DNA一端结合的磁珠探针(捕捉探针1).检测靶HBV DNA时,磁珠探针与信号探针在液相中可分别与HBV DNA靶序列一端结合最终形成三明治样结构.再以磁场将三明治样复合物从反应液中分离,以DTT溶液将信号探针从纳米金颗粒上洗脱.洗脱后的信号探针数量反映靶基因的多寡,信号探针一段与预先点样的基因芯片上的捕捉探针2结合,检测探针与信号探针另一段相结合,最后用银染液将检测探针显色从而得到靶目标DNA相对定量信息.结果表明,本检测方法的检测灵敏度达到10-15 mol/L水平.检测时间少于1.5 h,检测结果与HBV DNA水平呈现较好的线性关系且无假阳性结果;本方法有望用于乙肝病人血清中HBV DNA的快速筛测及其它微生物基因的检测.