电致变色/电控荧光双功能聚合物的合成及性能

将电活性双胺单体4,4'-二氨基二苯醚与1,2,4,5-环己烷四甲酸二酐共聚, 得到电活性聚酰胺酸聚合物. 再通过后功能化方法, 采用酰胺化反应将2-氨基芴引入到聚合物结构中, 合成了荧光聚合物. 通过核磁、 红外和凝胶渗透色谱证实了聚合物的结构. 该聚合物在0~0.8 V的电压下展示出可逆的电化学活性. 在利用电压改变苯胺齐聚物链段的氧化状态的过程中, 聚合物薄膜发生了明显的颜色变化, 展现出良好的电致变色性质. 荧光性质随着施加电压的改变而变化, 展现出优异的电控荧光特性.     

Novel polyamides with pendant p-phenylenediamine and α-/β-substituted naphthalene: synthesis,characteristics, and effects of substitution sites on electro-switchable optical behaviors

Recently, electro-switchable optical materials have attracted much attention for their promising applications in optoelectronic devices and biological analysis. The structures of active optical moieties are dominant for the resulting performance, which raises the requirement of studying their structure-property relationship. In this study, two p-phenylenediamine–based polyamides (α-HPA and β-HPA) containing α-/β-substituted pendant naphthalene were designed and synthesized to investigate the effect of two substitution sites of naphthalene on their thermal, optical, electrochemical, electrochromic, and electrofluorochromic behaviors. Quantum chemical calculations were carried out to help the analysis of the experimental results. The as-prepared polyamides both exhibited excellent solubility, thermal stabilities (no weight loss before 300 °C in air), and optical switching stability (500 cycles). Because of the more twisted conformation and stronger charge transfer effect between diphenylamine and α-substituted naphthalene, the α-HPA exhibited higher glass transition temperature, higher coloration efficiency, weaker fluorescence quantum efficiency, red-shifted emission wavelength, and rapider switching speed than the β-HPA. This study not only presents a deep understanding of substitution sites of fluorophores on the electro-switchable optical behaviors but also demonstrates the tailorability of the electrochromic/electrofluorochromic characteristics through fine structure adjustment, paving a pathway for further development of high-performance electrochromic/electrofluorochromic materials.     

Simultaneously achieving high capacity storage and multilevel anti-counterfeiting using electrochromic and electrofluorochromic dual-functional AIE polymers

With the advent of the big data era, information storage and security are becoming increasingly important. However, high capacity information storage and multilevel anti-counterfeiting are typically difficult to achieve simultaneously. To address this challenge, herein, two electrochromic and electrofluorochromic dual-functional polymers with aggregation-induced emission (AIE) characteristics were rationally designed and facilely prepared. Upon applying voltages, the absorption and fluorescence spectra of the AIE polymers can undergo reversible changes, accompanied by variation of their color and emission. By utilizing the controllable characteristics of the polymers, dual-mode display devices were fabricated via a simple spraying technique. More interestingly, a four-dimensional color code device was constructed by adding color change multiplexing to the two-dimensional space, thereby achieving high capacity information storage. Moreover, the color code device can also be applied in the multilevel anti-counterfeiting area. The encrypted information can be dynamically converted under different voltages. Thus, the AIE polymers show great promise for applications in multidimensional information storage and dynamic anti-counterfeiting, and the design strategy may provide a new avenue for advanced information storage and high security technology.

By using electrical stimuli-responsive AIE polymers, dual-mode display devices, multidimensional information storage and anti-counterfeiting devices were constructed.     

Molecular engineering tuning optoelectronic properties of thieno[3,2-<Emphasis Type="Italic">b</Emphasis>]thiophenes-based electrochromic polymers

Thieno[3,2-b]thiophene (TT) monomers end-capped with 3,4-ethylenedioxythiophene (EDOT) moieties are electropolymerized to form π-conjugated polymers with distinct electrochromic (EC) properties. Steric and electronic factors (electron donor and acceptor substituents) in the side groups of the TT core, as well as the structure of the polymer backbone strongly affect the electrochemical and optical properties of the polymers and their electrochromic characteristics. The studied polymers show low oxidation potentials, tunable from–0.78 to +0.30 V (vs. Fc/Fc⁺) and the band gaps from 1.46 to 1.92 eV and demonstrate wide variety of color palettes in polymer films in different states, finely tunable by structural variations in the polymer backbone and the side chains. EC materials of different colors in their doped/dedoped states have been developed (violet, deep blue, light blue, green, brown, purple-red, pinkish-red, orange-red, light gray, cyan and colorless transparent). High optical contrast (up to 79%), short response time (0.57–0.80 s), good cycling stability (up to 91% at 2000 cycles) and high coloration efficiency (up to 234.6 cm² C^–1) have been demonstrated and the influence of different factors on the above parameters of EC polymers have been discussed.     

Ion effects in REDOX cycling of conducting polymer based electrochromic materials

Conducting polymer based electrochromic devices were assembled with various ionic liquid (IL) based electrolytes to probe the role of the ion structure on electrochromic performance. When the IL contained the same anion as the dopant ion used in the conducting polymers an enhanced electrochromic performance was observed providing high photopic contrast at low applied potential.     

基于吡咯并吡咯二酮和苯并噻二唑聚合物的合成及其近红外电致变色性能

给-受体型窄带隙聚合物是一类新型可见-近红外电致变色材料,虽然可调性强、颜色丰富,但是其电致变色性能如对比度、稳定性等需要进一步提高。 通过调节聚合物中构筑单元吡咯并吡咯二酮(DPP)、苯并噻二唑(BTZ)和噻吩(T)的比例(n(DPP):n(BTZ):n(T)分别为1:0:1、1.5:0.5:1、2:1:1和3:2:1),合成了4种新型窄带隙电致变色聚合物,研究聚合物结构和电致变色性能的关系。 研究发现,这类聚合物在近红外光谱区具有较高的对比度(ΔT:50%60%)和变色效率(CE:300600 cm²/C),尤其是在1550 nm处,聚合物P3的ΔT高达63%、P4的CE高达471 cm²/C。 相比之下,含有BTZ基团的聚合物的吸收更长、对比度更高且更稳定。 这为设计给-受体型高性能电致变色聚合物提供了新的思路。     

Electrochromic device based on carbon nanotubes functionalized poly (methyl pyrrole) synthesized in hydrophobic ionic liquid medium

A facile approach of carbon nanotubes (CNTs) functionalized poly(methylpyrrole) [pMPy] electrosynthesized in hydrophobic ionic liquid for fabrication of electrochromic (EC) devices is discussed. Clear change from brown (oxidized) to pale yellow (neutral) color is demonstrated with robust cycle life. This synthesis route can be exploited to fabricate polymers from other organic conjugated systems and provide an avenue for applications requiring stable redox polymers in electrochromic devices.     

Electrofluorochromic Detection of Cyanide Anions Using a Nanoporous Polymer Electrode and the Detection Mechanism

An electrofluorochromic (EFC) conjugated copolymer ( P_EFC ) containing carbazole and benzothiadiazole (BTD) moieties is synthesized through Suzuki coupling followed by electrochemical polymerization, resulting in a nanoporous EFC polymer electrode. The electrode exhibits high sensitivity and selectivity in the EFC detection of cyanide anions (CN^?) in largely aqueous electrolyte (67 vol % water) because electrochemical oxidation of P_EFC leads to significant fluorescence quenching, and the presence of different concentrations (1 to 100 μM ) of CN^? in the electrolyte can weaken the oxidative quenching to substantially different extents. Although P_EFC is hydrophobic in the neutral state, it is converted to radical cation/dication states upon oxidation, rendering the P_EFC some hydrophilicity. Moreover, its nanoporous morphology provides a large surface area and short diffusion distance, facilitating the movement of CN^? in the electrolyte into the P_EFC film to interact with receptors. Density functional theory calculations show that the noncovalent interaction between electron‐deficient BTD and nucleophilic CN^? is energy favorable in the oxidized states in both aqueous and organic media, suggesting that the specific π^?–π⁺ interaction plays the main role in the CN^? detection.     

Two-dimensional Covalent Organic Frameworks for Electrochromic Switching

The electrochromic materials have received immense attention for the fabrication of smart optoelectronic devices. The alteration of the redox states of the electroactive functionalities results in the color change in response to electrochemical potential. Even though transition metal oxides, redox-active small organic molecules, conducting polymers, and metallopolymers are known for electrochromism, advanced materials demonstrating multicolor switching with fast response time and high durability are of increasing demand. Recently, two-dimensional covalent organic frameworks (2D COFs) have been demonstrated as electrochromic materials due to their tunable redox functionalities with highly ordered structure and large specific surface area facilitating fast ion transport. Herein, we have discussed the mechanistic insights of electrochromism in 2D COFs and their structure-property relationship in electrochromic performance. Furthermore, the state-of-the-art knowledge for developing the electrochromic 2D COFs and their potential application in next-generation display devices are highlighted.     

A new high‐performance blue to transmissive electrochromic material and use of silver nanowire network electrodes as substrates

Synthesis of a novel, high‐performance blue to transmissive switching electrochromic material is described. The polymer (P1) was prepared by both electrochemical ( P1E ) and chemical ( P1C ) means from the corresponding monomer. The electrochemically synthesized polymer ( P1E ) revealed 64% optical contrast change (on ITO) in the visible region and very fast switching times of 0.32 s (coloration) and 0.90 s (bleaching). On the other hand, the chemically synthesized, solution processable polymer ( P1C ) also showed a high optical contrast value (49%, on ITO) with very fast switching times of 0.86 s for coloration and 0.57 s for bleaching. These high optical contrast values coupled with fast switching times place these materials along with high‐performance blue to transmissive electrochromic polymers. Significantly, these improved characteristics were achieved by side chain engineering of a known, inferior blue to transmissive polymer, PBEBT. Towards fabrication of flexible electrochromic devices, the performance of P1C was also tested on silver nanowire network electrodes. Even though the full potential of the material could not be demonstrated, a good optical contrast of 24% was achieved using these electrodes. Under the same potential range allowed by silver nanowire network electrodes, P1C on ITO showed an optical contrast of 30%. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1680–1686     

静电纺荧光纳米纤维膜在痕量爆炸物检测中的应用

爆炸物检测作为打击爆炸恐怖主义的重要措施之一,正日益彰显出广阔的应用前景.其中,静电纺荧光纳米纤维膜在爆炸物检测领域已展现出其独特的优点,可满足爆炸物检测所需的检测速度快、检测灵敏度高等要求.本文总结了近年来静电纺荧光纳米纤维膜在爆炸物检测中的代表性成果,简要介绍了爆炸物荧光传感机理、静电纺丝技术原理、静电纺荧光纳米纤维膜的制备方法及其爆炸物检测性能的影响因素;系统、重点梳理了有机小分子体系、共轭聚合物体系、聚集诱导发光体系及其他荧光材料体系的静电纺荧光纳米纤维膜在爆炸物检测中的应用,并针对该领域尚未解决的问题和未来可能的发展方向进行了展望,可为实际爆炸物检测中静电纺荧光纳米纤维膜的设计提供指导.     

TiO2-PTPAT纳米核/壳结构复合膜的制备及电致变色性能

通过水热法在氟掺杂氧化锡(FTO)导电玻璃基底上制备了垂直生长的二氧化钛(TiO₂)纳米棒阵列, 以TiO₂纳米棒阵列为模板采用电化学聚合法, 原位制备了TiO₂-聚三[2-(4-噻吩)苯]胺(PTPAT)纳米核/壳结构的复合薄膜, 相比于纯PTPAT薄膜, TiO₂-PTPAT复合薄膜显示出更好的电致变色(EC)性能. PTPAT薄膜在600 nm波长下的对比度为28%, 在1100 nm波长下的对比度为60%, 其褪色时间为3.86 s, 着色时间为5.52 s; TiO₂- PTPAT复合薄膜在600 nm波长下的对比度为43%, 在1100 nm波长下的对比度为79%, 其褪色时间为3.35 s, 着色时间为4.43 s, 表明核/壳复合结构薄膜的光学对比度和响应时间性能更加优异. 将PTPAT薄膜和TiO₂-PTPAT复合薄膜作为电致变色层组装成固态EC器件, 基于复合薄膜的器件具有更好的循环稳定性和更高的耐受电压. 复合薄膜在保持PTPAT薄膜原有的EC性能的基础上, 由于有序生长的纳米阵列结构的引入增加了薄膜的比表面积, 为电致变色过程中离子的掺杂和脱掺杂提供了更多有序通道, 从而加快了离子扩散速度. TiO₂阵列的引入也改善了聚合物薄膜与透明导电电极之间的界面结合情况, 从而提升了器件的稳定性.     

Thieno[3,2‐b]Thiophene End‐Capped all‐Sulfur Analog of 3,4‐Ethylenedioxythiophene and its Eletrosynthesized Polymer: Is Distorted Conformation Not Suitable for Electrochromism?

By employing planar thieno[3,2‐b]thiophene (TT) as end‐capped units and famous 3,4‐ethylenedioxythiophene (EDOT) or its all‐sulfur analog 3,4‐ethylenedithiathiophene (EDTT) as cores, two conjugated oligomer, TT‐EDOT‐TT and TT‐EDTT‐TT, have been synthesized and electropolymerized into electrochromic polymer films, P(TT‐EDOT‐TT) and P(TT‐EDTT‐TT), respectively. Due to strongly noncovalent inter/intramolecular interactions from S? S attraction of TT‐EDTT‐TT, it has twisted molecular configuration in contrast to planar TT‐EDOT‐TT. Spectroscopic, electrochemical, morphological as well as theoretical calculation studies of these oligomers or polymers were carried out to reveal the significant influence of such molecular geometry on their physicochemical and optoelectronic properties. According to electrochromic kinetics, P(TT‐EDTT‐TT) presented preferable electrochromic behavior such as the higher optical contrast (70.8%), favorable coloration efficiency (331.3 cm² C^?1) and fast response time (0.72 s). This research will help us deeply understand the effect of spatial organization of precursor molecules on the properties of electrochromic polymers and provides a promising strategy to develop high‐performance electrochromic materials. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 1041–1048     

聚苯胺电致变色薄膜在不同颜色区间的电化学循环稳定性研究

本文采用电位阶跃和循环伏安法结合紫外可见光光度法研究了聚苯胺薄膜的电致变色性质. 聚苯胺薄膜颜色多变,颜色在浅黄色到绿色再到蓝色之间变化,本文研究在不同的颜色变化区间内聚苯胺薄膜的电化学循环稳定性. 研究结果表明,薄膜在黄色到蓝色(0.4 V ~ 1.2 V)以及绿色到蓝色(0.8 V ~ 1.2 V)区间变化时,电致变色循环性能较差,而在黄色和绿色(0.4 V ~ 0.8 V)之间变化时循环稳定性能良好,着色时间为4.5 s,着色效率高达159.48 cm²·C^-1.     

Rational design of quinones for high power density biofuel cells

Enzymatic fuel cells (EFCs) are devices that can produce electrical energy by enzymatic oxidation of energy-dense fuels (such as glucose). When considering bioanode construction for EFCs, it is desirable to use a system with a low onset potential and high catalytic current density. While these two properties are typically mutually exclusive, merging these two properties will significantly enhance EFC performance. We present the rational design and preparation of an alternative naphthoquinone-based redox polymer hydrogel that is able to facilitate enzymatic glucose oxidation at low oxidation potentials while simultaneously producing high catalytic current densities. When coupled with an enzymatic biocathode, the resulting glucose/O₂ EFC possessed an open-circuit potential of 0.864 ± 0.006 V, with an associated maximum current density of 5.4 ± 0.5 mA cm^–2. Moreover, the EFC delivered its maximum power density (2.3 ± 0.2 mW cm^–2) at a high operational potential of 0.55 V.     

新型电控荧光聚合物的合成与性能研究——推荐一个综合化学实验

介绍一个研究探索型大学化学综合性实验——新型电控荧光聚合物的合成与性能研究。内容包括电控荧光聚合物的合成及电控荧光性能的相关测试。通过本实验的实践,使学生在掌握基础理论和基本实验技能的同时,提高独立实验能力和创新意识。本实验的开展还可以使学生接触到学科的前沿领域,激发学生对科学研究的兴趣,培养学生的科研探究能力。     

Electrochemical photoluminescence modulation of functional materials and their electrochemical devices

This paper describes overview of electrofluorochromism, which is a phenomenon that controls photoluminescence through a change in the redox states of functional molecules, metal complexes, polymeric films, etc. Electrofluorochromic materials are considered prospective innovative materials because they can convert electrical input into intuitive visual signals. This field opens novel systems by combining absorption, reflection, and luminescence properties, leading to high contrast, night and day visibility, low-cost displays, and various sensing applications. The former sections provided a short overview of the electrofluorochromic phenomena and observation setups. The electrofluorochromic reactions and devices synchronized with the absorption change based on the electrochemical reaction we reported were also reviewed.     

Hybrid π-conjugated polymers from dibenzo pentacyclic centers:precursor design,electrosynthesis and electrochromics

π-Conjugated polymers(CPs)represent one of the quite important and rapidly growing branches of flexible electrochromic materials.Electrosynthesized hybrid CPs employing dibenzo pentacycles(fluorenes,carbazoles,dibenzothiophenes,and dibenzofuran)as the backbones have received considerable attention owing to their special structures and interesting electrochromic performances.Recent studies show that polymers from these structures exhibit decent contrast ratios,favorable coloration efficiencies,low switching voltages,fast response time,excellent stability,and color persistence.Intrinsically,their electrochromic properties significantly depend on fine-tailoring of precursor monomer structures,and polymerization techniques and conditions.This review devotes to showing a clear picture of the research progress of dibenzo pentacycle-centered CPs via electrochemical polymerization,including fluorenes,carbazoles,dibenzothiophenes,and dibenzofuran-based hybrid electrochromic polymers.Critical influences of the tailored precursor structures on their electropolymerization and resultant polymer performances are highlighted,aiming at providing an insight for the development of novel fused ring-based polymer electrochromic materials.     

Flexible Electrochromic Poly(thiophene-furan) Film via Electrodeposition with High Stability

Flexible electrochromic(EC) materials have an urgent demand in the current electronic equipment market due to their technological interest and applications. However, at present, few flexible EC devices developed by industry exist due to some problems and challenges still to be solved such as flexibility. In this work, we have successfully synthesized a novel thiophene-furan(TFu) monomer via Stille coupling reaction,and facilely electrochemically polymerized in a neutral Bu_4 NPF_6-CH_2Cl2 electrolyte system to afford the corresponding poly(thiophene-furan)(PTFu) polymer film with good flexibility. The electrochemical and photoelectrochemical analyses of the as-prepared PTFu demonstrate that it has achieved the improved EC performance compared with pure polyfuran and polythiophene polymers, and as a result it possesses favorable EC parameters manifested as a reasonable ΔT(32.1%), faster response(1.38 s), excellent coloration efficiency(CE, 300.9 cm²·C^-1), and after a continuous redox process up to 2000 s, its optical stability can be maintained at 96%, and even after 3000 s, it can still be maintained at 80%. In addition, the successful assembly of the electrochromic device of PTFu film can easily realize the reversible conversion of the color from orange to gray. All these systematic studies suggest that the as-prepared flexible PTFu film is a promising candidate for EC materials and has great potential interest for versatile EC applications.     

Electrochromic Properties of Rhodium Oxide Films Prepared by Sol-gel Method

Electrochromic materials have been extensively investigated for their significant potential in information display, automotive, sensor and smart windows^[1]. Many studies have been carried out on the inorganic electrochromic materials, such as WO₃, MoO₃, NiO_x and so on^[2]. In this paper, We first report the electrochromic behavior of rhodium oxide film prepared by sol-gel method on transparent conductor substrate. The film exhibited reversible two color (from bright yellow to dark green) electrochromic behavior with satisfactory contrast at anodic and cathodic forms when the applied potential was reversed successively.