Nonisothermal crystallization behavior of the poly(ethylene glycol) block in poly(L‐lactide)–poly(ethylene glycol) diblock copolymers: Effect of the poly(L‐lactide) block length

The confined crystallization behavior, melting behavior, and nonisothermal crystallization kinetics of the poly(ethylene glycol) block (PEG) in poly(L ‐lactide)–poly(ethylene glycol) (PLLA–PEG) diblock copolymers were investigated with wide‐angle X‐ray diffraction and differential scanning calorimetry. The analysis showed that the nonisothermal crystallization behavior changed from fitting the Ozawa equation and the Avrami equation modified by Jeziorny to deviating from them with the molecular weight of the poly(L ‐lactide) (PLLA) block increasing. This resulted from the gradual strengthening of the confined effect, which was imposed by the crystallization of the PLLA block. The nucleation mechanism of the PEG block of PLLA15000–PEG5000 at a larger degree of supercooling was different from that of PLLA2500–PEG5000, PLLA5000–PEG5000, and PEG5000 (the numbers after PEG and PLLA denote the molecular weights of the PEG and PLLA blocks, respectively). They were homogeneous nucleation and heterogeneous nucleation, respectively. The PLLA block bonded chemically with the PEG block and increased the crystallization activation energy, but it provided nucleating sites for the crystallization of the PEG block, and the crystallization rate rose when it was heterogeneous nucleation. The number of melting peaks was three and one for the PEG homopolymer and the PEG block of the diblock copolymers, respectively. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3215–3226, 2006     

Probing the micellization of diblock and triblock copolymers of poly(<Emphasis Type="SmallCaps">l</Emphasis>-lactide) and poly(ethylene glycol) in aqueous and NaCl salt solutions

The micelle formation of a series of amphiphilic block copolymers in aqueous and NaCl solutions was studied by a fluorescent probe technique using pyrene as a "model drug". These copolymers were synthesized from poly (ethylene glycol) (PEG) and l-lactide by a new calcium ammoniate catalyst. They had fixed PEG block lengths (44, 104 or 113 ethylene oxide units) and various poly(l-lactide) (PLLA) block lengths (15–280 lactide units). The critical micelle concentration (cmc) was found to decrease with increasing PLLA content. The distinct dissimilarity of the cmc values of diblock and triblock copolymers based on the same block length of PEG provided evidence for the different configurations of their micelles. It was also observed that the introduction of NaCl salt significantly contributed to a decrease in the cmcs of the copolymers with short PEG and PLLA blocks, while it had less influence on the cmcs of copolymers with long PEG or PLLA blocks. The dependence of partition coefficients ranging from 0.2×10⁵ to 1.9×10⁵ on the PLLA content in the copolymer and on the micelle configuration was also discussed. The contribution of NaCl salt to increasing the partition of pyrene into a micellar phase was observed.     

Poly(ethylene glycol)–poly(L‐lactide) star block copolymer hydrogels crosslinked by metal–ligand coordination

The aqueous solution behavior and thermoreversible gelation properties of pyridine‐end‐functionalized poly(ethylene glycol)–poly(L ‐lactide) (PEG–(PLLA)₈–py) star block copolymers in the presence of coordinating transition metal ions were studied. In aqueous solutions, the macromonomers self‐assembled into micelles and micellar aggregates at low concentrations and formed physically crosslinked, thermoreversible hydrogels above a critical gel concentration (CGC) of 8% w/v. In the presence of transition metal ions like Cu(II), Co(II), or Mn(II), the aggregate dimensions increased. Above the CGC, the gel–sol transition shifted to higher temperatures due to the formation of additional crosslinks from intermolecular coordination complexes between metal ions and pyridine ligands. Furthermore, as an example, PEG–(PLLA)₈–py hydrogels stabilized by Mn(II)–pyridine coordination complexes were more resistant against degradation/dissolution when placed in phosphate buffered saline at 37 °C when compared with hydrogels prepared in water. Importantly, the stabilizing effect of metal–ligand coordination was noticeable at very low Cu(II) concentrations, which have been reported to be noncytotoxic for fibroblasts in vitro. These novel PEG–(PLLA)₈–py metallo‐hydrogels, which are the first systems to combine metal–ligand coordination with the advantageous properties of PEG–PLLA copolymer hydrogels, are appealing materials that may find use in biomedical as well as environmental applications like the removal of heavy metal ions from waste streams. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Rheology and Drug Release Properties of Bioresorbable Hydrogels Prepared from Polylactide/Poly(ethylene glycol) Block Copolymers

Ring-opening polymerization of L(D)-lactide was realized in the presence of poly(ethylene glycol) (PEG), yielding PLLA/PEG and PDLA/PEG block copolymers. Bioresorbable hydrogels were prepared from aqueous solutions containing both copolymers due to interactions and stereocomplexation between PLLA and PDLA blocks. The rheological properties of the hydrogels were investigated under various conditions by changing copolymer concentration, temperature, time and frequency. The hydrogels constitute a dynamic and evolutive system because of continuous formation/destruction of crosslinks and degradation. Drug release studies were performed on hydrogel systems containing bovine serum albumin (BSA). The release profiles appear almost constant with little burst effect. The release rate depends not only on gelation conditions such as time and temperature, but also on factors such as drug load, as well as molar mass and concentration of the copolymers.     

Poly(N-isopropylacrylamide-co-N-t-butylacrylamide)-block-poly(ethylene glycol)-block-poly(N-isopropylacrylamide-co-N-t-butylacrylamide) triblock copolymers: synthesis and thermogelation properties of aqueous solutions

Novel triblock copolymers with PEG middle blocks of 1–10 kDa and poly(N-isopropylacrylamide-co-t-butylacrylamide) statistical copolymer side arms with DP_n?≈?88 and different compositions, were synthesized by SET-LRP. The thermogelation properties of their aqueous solutions depended on both hydrophobic monomer content of the side blocks and molecular weight (MW) of the poly(ethylene glycol) (PEG) middle block, as proven by dynamic rheometry, DSC, and tube inversion method measurements. At constant PEG chain length, increasing TBAM proportions led to a gelation process occurring at progressively lower temperatures, as well as to a lower stability of the forming hydrogels in the case of shorter-PEG-chain block copolymers. By employing longer PEG blocks (M_PEG ≥6,000 Da), stable hydrogels with the gelation temperature below 37 °C could be obtained. For a constant composition of the copolyacrylamide blocks, the dependence of the phase transition temperature (T_ph) on M_PEG displayed a different shape at different polymer solution concentrations, because of the stronger variation of T_ph with polymer concentration as M_PEG increased. Also, the viscoelastic properties of the hydrogels resulting from 20 wt.% polymer aqueous solutions at 37 °C were stronger affected by the MW of the PEG middle block than by the hydrophobic character of the thermosensitive side blocks.     

Y-shaped block copolymers of poly(ethylene glycol) and poly(N-isopropylacrylamide) synthesized by ATRP

Novel Y-shaped block copolymers of poly(ethylene glycol) and poly(N-isopropylacrylamide),PEG-b-(PNIPAM)_2,were successfully synthesized through atom transfer radical polymerization(ATRP).A difunctional macroinitiator was prepared by esterification of 2,2-dichloroacetyl chloride with poly(ethylene glycol) monomethyl ether(PEG).The copolymers were obtained via the ATRP of N-isopropylacrylamide(NIPAM) at 30℃with CuCl/Me_6TREN as a catalyst system and DMF/H_2O(v/v = 3:1) mixture as solvent.The resulting copo...     

Synthesis and gelation properties of PEG-PLA-PEG triblock copolymers obtained by coupling monohydroxylated PEG-PLA with adipoyl chloride

Ring-opening polymerization of D,L-lactide was carried out in the presence of monohydroxylated poly(ethylene glycol) (PEG) with Mn of 2000 and 5000, using zinc powder as catalyst. The resulting PEG-b-polylactide (PEG-PLA) diblocks with various ethylene oxide/lactyl (EO/LA) ratios were coupled with adipoyl chloride to yield PEG-PLA-PEG triblock copolymers. N-Dimethylaminopyridine (DMAP) was used as catalyst. The obtained PEG-PLA-PEG triblock copolymers were characterized by various analytical techniques such as IR, 1H NMR, size exclusion chromatography, X-ray diffraction, and differential scanning calorimetry. Data showed that all the copolymers were semicrystalline with the PEG-type crystalline structure, the crystallinity decreasing with increasing PLA block length. Bioresorbable hydrogels were prepared from the water-soluble triblock copolymers. Rheological measurements showed a gel-sol transition with increasing temperature and gelation was found to be thermoreversible. The copolymer solution behaves like a viscoelastic liquid above the gel point and like a viscoelastic solid below the gel point. The critical gelation concentration, the gel-sol transition temperature at a given concentration, and corresponding moduli depend on both the EO/LA ratio and the molecular weight of the copolymers. It is assumed that gelation results from interactions between PEG blocks at low temperatures and that these interactions are disrupted as the temperature is elevated. The shrinking of PEG blocks with increasing temperature seems to be in agreement with the variation of the gel-sol transition temperatures.     

Characterization of amphiphilic hydrocarbon modified Poly(ethylene glycol) synthesized through ring-opening reaction of 2-(1-octadecenyl)succinic anhydride

Poly(ethylene glycol) (PEG) triblock and diblock amphiphilic block copolymers were synthesized from poly(ethylene glycol) and poly(ethylene glycol) monomethyl ether, respectively. The hydroxyl groups of PEG readily react with 2-(1-octadecenyl) succinic anhydride (OSA) at 140 °C through ring-opening reaction of the succinic anhydride. Both the PEG-OSA diblock and triblock copolymers are produced without use of any solvent or catalyst. The molecular structure of the copolymers was characterized by ¹H NMR and FTIR spectroscopy, and the thermal properties by DSC. The behavior of the copolymers in selective and nonselective solvents was studied by ¹H NMR spectroscopy in deuterium oxide and d-chloroform. The aggregation of the polymers in water was studied with a particle size analyzer and a transmission electron microscope (TEM) in bright field mode. The results show that the hydrophobic C₁₈ chain with intramolecular succinic anhydride linker can be attached to the hydrophilic PEG chain, an ester bond forming between the blocks. The copolymers exhibit flexible, liquid-like hydrophobic blocks even in water, which is a nonsolvent for OSA. PEG-OSA block copolymers self-organize in water, forming micellar polymer aggregates in nanoscale.     

Thermosensitive behavior of poly(ethylene glycol)/poly(2‐(N,N‐dimethylamino)ethyl methacrylate) double hydrophilic block copolymers

The poly(ethylene glycol)/poly(2‐(N,N‐dimethylamino)ethyl methacrylate) (PEG/PDMAEMA) double hydrophilic block copolymers were synthesized by atom transfer radical polymerization using mPEG‐Br or Br‐PEG‐Br as macroinitiators. The narrow molecular weight distribution of PEG/PDMAEMA block copolymers was identified by gel permeation chromatography results. The thermosensitivity of PEG/PDMAEMA block copolymers in aqueous solution was revealed to depend significantly on pH, ionic strength, chain structure, and concentration of the block copolymers. By optimizing these factors, the cloud point temperature of PEG/PDMAEMA block copolymers can be limited within body temperature range (30–37 °C), which suggests that PEG/PDMAEMA block copolymers could be a good candidate for drug delivery systems. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 503–508, 2010     

Amino-terminated poly(ethylene glycol) as the initiator for the ring-opening polymerization of 3-methylmorpholine-2,5-dione

Block copolymers with poly[3-methylmorpholine-2,5-dione] (PMMD) and poly[ethylene glycol] (PEG) blocks, PMMD-b-PEG-b-PMMD, were synthesized via ring-opening polymerization of 3-methylmorpholine-2,5-dione with amino-terminated PEG as the initiator at 140 °C within 10 h. Three kind of amino terminated PEG with different average molecular weight were used. The block copolymer was amorphous and the glass transition temperature decreased with increase of PEG block in the copolymer.     

The Synthesis of Poly(ethylene oxide)-Block-Polybutylacrylate

ＴｈｅＳｙｎｔｈｅｓｉｓｏｆＰｏｌｙ（ｅｔｈｙｌｅｎｅｏｘｉｄｅ）┐Ｂｌｏｃｋ┐Ｐｏｌｙｂｕｔｙｌａｃｒｙｌａｔｅ＊＊ＳｕｐｐｏｒｔｅｄｂｙｔｈｅＮａｔｉｏｎａｌＮａｔｕｒａｌＳｃｉｅｎｃｅＦｏｕｎｄａｔｉｏｎｏｆＣｈｉｎａａｎｄＤｏｃｔｏｒａｌｆｏ...     

Aggregation and thermoresponsive properties of new star block copolymers with a cholic acid core

Poly(allyl glycidyl ether) (PAGE) and poly(ethylene glycol) (PEG) blocks were sequentially grown via anionic polymerization to form four block copolymer arms on a cholic acid (CA) core, yielding star block copolymers (CA(AGE(8)-b-EG(n))(4)) with low polydispersities (ca. 1.05). The introduction of PAGE segments into CA(PEG)(4) significantly reduced their crystallinity. The polymers can aggregate in water at room temperature above their critical aggregation concentration. The copolymers are thermoresponsive; their behavior in aqueous solutions was studied by the use of UV-visible spectroscopy, dynamic light scattering, and transmission electron microscopy. Their cloud points vary from 13 to 55 °C with increasing length of the PEG segments. Double thermoresponsive behavior was observed with short PEG segments because of a two-step transition process: small micelles are formed upon heating and then further aggregate into micellar clusters through the association of PEG chains.     

Fast Crystallization and Toughening of Poly(<Emphasis Type="Italic">L</Emphasis>-lactic acid) by Incorporating with Poly(ethylene glycol) as a Middle Block Chain

High molecular weight poly(L-lactic acid)-poly(ethylene glycol)-poly(L-lactic acid) (PLLA–PEG–PLLA; PLGL) triblock copolymers with various lengths of the PLLA blocks were synthesized by ringopening polymerization of L-lactide. The amorphous and crystalline PLLA and PLGL films were prepared by hot pressing with different temperature treatments. PLLA and PEG blocks exhibited good miscibility in the amorphous PLGL samples, while phase separation occurred in the crystalline ones. The flexible PEG blocks not only accelerated the crystallization rate of PLLA but also greatly improve its flexibility. The crystallization time of PLGL copolymers shorten to less than 5 min and copolymers showed much better flexibility than neat PLLA, the maximum fracture strain reached about 600% for amorphous sample. The processing time of PLLA was greatly shortened and the brittleness of material was improved.     

Thermoreversible gelation of poly(ethylene oxide) biodegradable polyester block copolymers. II

Poly(ethylene oxide)-b-poly(L-lactic acid) (PEO-PLLA) diblock copolymers were synthesized via a ring opening polymerization from poly(ethylene oxide) and l -lactide. Stannous octoate was used as a catalyst in a solution polymerization with toluene as the solvent. Their physicochemical properties were investigated by using infrared spectroscopy, ¹H-NMR spectroscopy, gel permeation chromatography, and differential scanning calorimetry, as well as the observational data of gel-sol transitions in aqueous solutions. Aqueous solutions of PEO-PLLA diblock copolymers changed from a gel phase to a sol phase with increasing temperature when their polymer concentrations are above a critical gel concentration. As the PLLA block length increased, the gel-sol transition temperature increased. For comparison, diblock copolymers of poly(ethylene oxide)-b-poly(l -lactic acid-co-glycolic acid) [PEO-P(LLA/GA)] and poly(ethylene oxide)-b-poly(dl -lactic acid-co-glycolic acid) [PEO-P(DLLA/GA)] were synthesized by the same methods, and their gel-sol transition behaviors were also investigated. The gel-sol transition properties of these diblock copolymers are influenced by the hydrophilic/hydrophobic balance of the copolymer, block length, hydrophobicity, and stereoregularity of the hydrophobic block of the copolymer. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2207–2218, 1999     

聚乙二醇-聚乳酸共聚物胶束溶液的冷冻干燥及胶束体外释药动力学研究

合成了一系列亲水、疏水链段质量比例不同的聚乙二醇-聚乳酸(PEG-PLA)嵌段共聚物胶束, 并以两性霉素B为模型药物制备了载药胶束. 为获得稳定性良好的、可长期储存的载药胶束剂型, 对胶束进行了冷冻干燥. 使用不同浓度的糖类(包括甘露糖、海藻糖、葡萄糖)、泊洛沙姆188 (Pluronic F68)、聚乙二醇作为冻干保护剂, 以冻干产品的重分散性、冻干前后胶束的粒径及多分散性为指标评价各种保护剂的保护效果. 结果发现, 当嵌段聚合物中聚乳酸链段的质量百分比小于或等于聚乙二醇时, 糖类、Pluronic F68和PEG均可以起到有效的冻干保护作用; 而对于聚乳酸链段质量比例较大的共聚物胶束, 只有PEG和Pluronic F68能够起到较好的冻干保护作用. 对载药胶束体外释放研究表明, 聚合物胶束的体外释放缓慢, 符合一级动力学特征.     

Molecular captain: A light‐sensitive linker molecule in poly(ethylene glycol)‐poly(L‐alanine)‐poly(ethylene glycol) triblock copolymer directs molecular nano‐assembly,conformation, and sol‐gel transition

We report a poly(ethylene glycol)‐poly(L ‐alanine)‐azobenzene‐poly(L ‐alanine)‐poly(ethylene glycol) (PEG‐PA‐Z‐PA‐PEG) as a temperature and light sensitive polymer. The poly(ethylene glycol)‐poly(L ‐alanine) diblock copolymers with a flexible‐rigid block structure were coupled by an azobenzene group that undergoes a reversible configurational change between “trans” and “cis” upon exposure to UV and vis light. The single azobenzene molecule embedded in the middle of a block copolymer with a flexible (shell)‐rigid (core) structure significantly affected molecular assembly, micelle size, polypeptide secondary structure, and sol‐to‐gel transition temperature of the polymer aqueous solution, depending on its exposure to UV or vis light. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Self-assembling of biocompatible BAB amphiphilic triblock copolymers PLL(Z)-PEG-PLL(Z) in aqueous medium

A novel biocompatible BAB amphiphilic triblock copolymers which consist of poly(ethylene glycol) (PEG) and poly(ε-benzyloxycarbonyl l-Lysine) (PLL(Z)) were synthesized by anion ring opening polymerization of N-carboxyanhydride of ε-benzyloxycarbonyl-l-Lysine (l-Lys(z)-NCA) using α-amino-ω-amino-poly(ethylene glycol) as initiator in DMF. The block copolymers were characterized by IR, ¹H-NMR, GPC, DSC. The results showed that the block copolymers were of narrow molecular distribution and well defined structure. The self-assembled behaviors of block copolymers in aqueous medium were investigated. The effects of various factors, such as cosolvents, initial concentration, temperature, annealing time and times of frozen-thaw cycle etc., on the aggregate morphologies were investigated by transmission electron microscopy (TEM). Different morphological aggregates such as sphere, rod and vesicle etc. could be obtained at controlled conditions, at the same time, a novel helical aggregate was observed. These regular nanometer structures have potential applications in biomedicine due to the biocompatibility of two blocks.     

Sol‐gel transition behavior of amphiphilic comb‐like poly[(PEG‐b‐PLGA)acrylate] block copolymers

The effects of comb‐like amphiphilic block copolymer architectures on the physical properties such as sol‐gel transition and micellization behaviors with the change of temperature and pH were examined. Comb‐like poly((poly(ethylene glycol)‐b‐(poly(lactic acid‐co‐glycolic acid))acrylate‐co‐acrylic acid) (poly((PEG‐b‐PLGA)A‐co‐AA)) copolymers were synthesized by coupling of poly(acrylic acid) (PAA) with two different kinds of PEG‐b‐PLGA diblock copolymers to investigate the effects of the number of branches and hydrophilicity/hydrophobicity on the sol‐gel transition and micellization. The molecular weights and chemical structures were confirmed by GPC and ¹H NMR. The number of PEG‐b‐PLGA branches was gradually deviated from the feed molar ratio with increasing the molecular weight and the number of branches and due to the bulkiness of PEG‐b‐PLGA. Poly[(PEG‐b‐PLGA)A‐co‐AA] aqueous solutions showed thermosensitive sol‐gel transition behavior, and the gelation took place at lower concentration with increasing the number of branches and PLGA chain length due to the increase of hydrophobicity. The temperature, at which abrupt increase of viscosity by dynamic rheometer appeared, was also in good agreement with sol‐gel transition by tube‐titling method. The CMC, calculated from UV‐Visible spectroscopy using DPH as hydrophobic dye, also decreased with increasing the number of PEG‐b‐PLGA branches and PLGA chain length with same reason. The micelle size was increased with increasing temperature at the initial stage, however, decreased with further increase of temperature, since the micelles were, first, aggregated by hydrophobic intermolecular interaction, and then fragmented by dehydration of PEG segments with increasing temperature. PH‐sensitive PAA backbone played a key role in physical properties. With decreasing pH, sol‐to‐gel transition temperature, CMC values, and micelle size were decreased because of the increase of hydrophobicity resulting form non‐ionized acrylic acid. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1287–1297, 2010     

二维核磁共振法研究线型聚乙二醇与树枝状聚苄醚形成的三嵌段共聚物

嵌段共聚物是由几个不同的高分子链段通过化学键相连所构成的 .在合成方法上一般是通过几类不同的活性聚合 ,调控单体的加料次序或者通过不同的大分子链段末端的反应活性点偶联而成[1～ 3 ] .所形成的化学键将嵌段共聚物中不相溶的几段相连 ,于是在特定的条件下就产生了微相分离的现象 ,继而可以在 1 0～ 1 0 0nm尺度范围内形成各种各样的微区结构[4,5] .在过去的几十年里 ,研究的重点是认定嵌段共聚物的微区结构和研究微相分离的动力学 ,已发表了大量重要的结果 ,至今仍然是高分子科学中的热门课题 .非常重要的一点是 ,正是由于不同的高分…     

New architectures of poly(ethylene glycol) and poly(methylthiirane) in block copolymers

Two synthetic ways were experimented to prepare new architectures of block copolymers made of poly(ethylene glycol) (PEG) and poly(methylthiirane). The coupling of both blocks conveniently end-capped as well as anionic polymerization of methylthiirane initiated by PEG-thiols gave readily the copolymers. Their characterization by ¹H NMR, SEC and IR confirmed the expected structures.