Palladium-catalyzed aminations of aryl halides with phosphine-functionalized imidazolium ligands

A series of 1-(2-diphenylphosphinoferrocenyl)ethyl-3-substituted imidazolium iodides [3-substituent = methyl (1a); isopropyl (1b); tert-butyl (1c); 1-adenosyl (1d); cyclohexyl (1e); 2,6-dimethylphenyl (1f); 2,4,6-trimethylphenyl (1g); 2,6-diisopropylphenyl (1h)] have been prepared and evaluated as ligands in the palladium-catalyzed aminations of aryl halides with various amines. The scope of the coupling process was carried out for various aryl bromides and chlorides with the catalysts generated in situ from a mixture of Pd(OAc)2 and in the presence of a base. NaO t Bu was found the choice of base in combination with dioxane, toluene, or DME as solvent, although NaOH or Cs2CO3 promoted the coupling of 4-bromotoluene with morpholine in moderate conversion. The steric hindrance from the 3-substituent of imidazolium in the hybrid-bidentate chelating system was found to be only beneficial to the substrates without ortho-substituents. The more sterically hindered 1d or 1h promoted the coupling of bromobenzene with morpholine in nearly quantitative conversion with 0.2 mol% of palladium loading in the presence of NaO t Bu at 110 degrees C, and 94% of conversion was afforded with the less sterical demanding 1a for a longer time. However, for the substrates with ortho-substituents, higher conversions were achieved with 1a. The Pd(OAc)2/1d catalytic system was also active for deactivated aryl chloride, and 71% isolated yield for the desired product was realized for coupling of 4-chloroanisole with morpholine at 2 mol% of catalyst loading. The developed catalyst system has been applied successfully to the synthesis of a key building block for a type of functional polymers.     

Zinc complexes of anionic NPPN and NP(S)PN ligands and rearrangement to the isomeric NPNP and NP(S)NP ligands in mercury complexes

The lithium (imido)diphosphineimide Li(Et2O)[DippNPhP-P((n)Bu)PhNDipp] (1) (Dipp = 2,6-(i)Pr2C6H3) undergoes simple metathesis reactions with equimolar amounts of zinc halides, ZnCl2 and (t)BuZnBr, to give the respective N,N'-chelated complexes {Zn(micro-Cl)[DippNPhP-P((n)Bu)PhNDipp]}2 (2) and (t)BuZn[NDippPhP-P((n)Bu)PhNDipp] (3). In contrast, the reaction of two equivalents of complex 1 with HgCl2 affords the rearranged bis(imidodiphosphinoamine) complex, Hg[PhP([double bond, length as m-dash]NDipp)(micro-NDipp)P((n)Bu)Ph]2 (4), where the ligand acts as a P-centered anion. The (imido)diphosphineimide backbone of remains intact on oxidation with elemental sulfur to afford the lithium (imido)diphosphineimine sulfide complex, Li(Et2O)[DippNPhP(S)-P((n)Bu)PhNDipp] (6). Reactions of 6 with group 12 metal halides show similar behaviour to those of complex 1. The N,N' chelated metathesis products RZn[DippNPhP(S)-P((n)Bu)PhNDipp] (7, R = Cl; 8, R = (t)Bu) are obtained on reaction with ZnCl2 and (t)BuZnBr, respectively. Isomerization of the ligand backbone occurs on reaction of 6 with HgCl2 to form the homoleptic P,S-chelated mercury complex Hg[Ph(S)P(=NDipp)(micro-NDipp)P((n)Bu)Ph]2 (9). Complexes 2, 3, 4, 6, 8 and 9 have been characterized by X-ray crystallography.     

Palladium-catalyzed formylation of aryl bromides: elucidation of the catalytic cycle of an industrially applied coupling reaction

The first comprehensive study of the catalytic cycle of the palladium-catalyzed formylation of aryl bromides with synthesis gas (CO/H2, 1:1) is presented. The formylation in the presence of efficient (Pd/PR2(n)Bu, R = 1-Ad, (t)Bu) and nonefficient (Pd/P(t)Bu3) catalysts was investigated. The main organometallic complexes involved in the catalytic cycle were synthesized and characterized, and their solution chemistry was studied in detail. Comparison of stoichiometric and catalytic reactions using P(1-Ad)2(n)Bu, the most efficient ligand known for the formylation of aryl halides, led to two pivotal results: (1) The corresponding carbonylpalladium(0) complex [Pd(n)(CO)(m)L(n)] and the respective hydrobromide complex [Pd(Br)(H)L2] are resting states of the active catalyst, and they are not directly involved in the catalytic cycle. These complexes maintain the concentration of most active [PdL] species at a low level throughout the reaction, making oxidative addition the rate-determining step, and provide high catalyst longevity. (2) The product-forming step proceeds via base-mediated hydrogenolysis of the corresponding acyl complex, e.g., [Pd(Br)(p-CF3C6H4CO){P(1-Ad)2(n)Bu}]2 (8), under mild conditions (25-50 degrees C, 5 bar). Stoichiometric studies using the less efficient Pd/P(t)Bu3 catalyst resulted in the isolation and characterization of the first stable three-coordinated neutral acylpalladium complex, [Pd(Br)(p-CF3C6H4CO)(P(t)Bu3)] (10). Hydrogenolysis of 10 needed significantly more drastic conditions compared to that of dimeric 8. In the presence of amine base, complex 10 gave a catalytically inactive diamino acyl complex, which explains the low activity of the Pd/P(t)Bu3 catalyst formylation of aryl bromides.     

A versatile palladium-mediated three-component reaction for the one-pot synthesis of stereodefined 3-arylidene-(or 3-alkenylidene-)tetrahydrofurans.

A one-pot reaction between equimolecular amounts of various propargyl alcohols, Michael acceptors, and unsaturated halides (or triflates) in the presence of a palladium(0) catalyst provides a simple and flexible entry into highly substituted 3-arylidene-(or 3-alkenylidene-)tetrahydrofurans. The efficiency of this palladium-mediated three-component reaction has been shown to be strongly influenced by the nature of the catalyst system, and in this regard, a palladium(0) catalyst generated in situ by reduction of PdCl2(PPh3)2 with n-butyllithium has been found particularly effective.     

Air stable,sterically hindered ferrocenyl dialkylphosphines for palladium-catalyzed C[bond]C,C[bond]N,and C[bond]O bond-forming cross-couplings

Pentaphenylferrocenyl di-tert-butylphosphine has been prepared in high yield from a two-step synthetic procedure, and the scope of various cross-coupling processes catalyzed by complexes bearing this ligand has been investigated. This ligand creates a remarkably general palladium catalyst for aryl halide amination and for Suzuki coupling. Turnovers of roughly 1000 were observed for aminations with unactivated aryl bromides or chlorides. In addition, complexes of this ligand catalyzed the formation of selected aryl ethers under mild conditions. The reactions encompassed electron-rich and electron-poor aryl bromides and chlorides. In the presence of catalysts containing this ligand, these aryl halides coupled with acyclic or cyclic secondary alkyl- and arylamines, with primary alkyl- and arylamines, and with aryl- and primary alkylboronic acids. These last couplings provide the first general procedure for reaction of terminal alkylboronic acids with aryl halides without toxic or expensive bases. The ligand not only generates highly active palladium catalysts, but it is air stable in solution and in the solid state. Palladium(0) complexes of this ligand are also air stable as a solid and react only slowly with oxygen in solution.     

Copper + nickel-in-charcoal (Cu-Ni/C): a bimetallic, heterogeneous catalyst for cross-couplings

A new heterogeneous catalyst composed of copper and nickel oxide particles supported within charcoal has been developed. It catalyzes cross-couplings that traditionally use palladium, nickel, or copper, including Suzuki-Miyaura reactions, Buchwald-Hartwig aminations, vinylalane alkylations, etherifications of aryl halides, aryl halide reductions, asymmetric conjugate reductions of activated olefins, and azide-alkyne "click" reactions.     

(CyPF-(t)Bu)PdCl2]: an air-stable, one-component, highly efficient catalyst for amination of heteroaryl and aryl halides

An air- and moisture-stable palladium catalyst, [(CyPF-(t)Bu)PdCl2] (1), for coupling of heteroaryl chlorides, bromides, and iodides with a variety of primary amines is described. Most of these reactions occurred in high yield with 0.001-0.05 mol % catalyst loading. The reactions tolerated a wide range of functional groups.     

Resorcinol based acyclic dimeric and cyclic di- and tetrameric cyclodiphosphazanes: synthesis, structural studies, and transition metal complexes

The condensation reaction of resorcinol with cis-[ClP(μ-N(t)Bu)(2)PN(H)(t)Bu] produced a difunctional derivative 1,3-C(6)H(4)[OP(μ-N(t)Bu)(2)PN(H)(t)Bu](2) (1), whereas the similar reaction with [ClP(μ-N(t)Bu)](2) resulted in the formation of a 1:1 mixture of dimeric and tetrameric species, [{P(μ-N(t)Bu)}(2){1,3-(O)(2)-C(6)H(4)}](2) (2a) and [{P(μ-N(t)Bu)}(2){1,3-(O)(2)-C(6)H(4)}](4) (2b), which were separated by repeated fractional crystallization and column chromatography. The reaction of dimer 2a with H(2)O(2) and selenium produces tetrachalcogenides [{(O)P(μ-N(t)Bu)}(2){1,3-(O)(2)-C(6)H(4)}](2) (3) and [{(Se)P(μ-N(t)Bu)}(2){1,3-(O)(2)-C(6)H(4)}](2) (4), respectively. The reaction between the dimer (2a) and [Pd(μ-Cl)(η(3)-C(3)H(5))](2) or AuCl(SMe(2)) yielded the corresponding tetranuclear complexes, [{((Cl)(η(3)-C(3)H(5))Pd)P(μ-N(t)Bu)}(2){1,3-(O)(2)-C(6)H(4)}](2) (5) and [{(ClAu)P(μ-N(t)Bu)}(2){1,3-(O)(2)-C(6)H(4)}](2) (6) in good yield. The complexes 5 and 6 are the rare examples of phosphorus macrocycles containing two or more exocyclic transition metal fragments. Treatment of 1 with copper halides in 1:1 molar ratio resulted in the formation of one-dimensional (1D) coordination polymers, [(CuX){1,3-C(6)H(4){OP(μ-N(t)Bu)(2)PN(H)(t)Bu}}(2)](n) (7, X = Cl; 8, X = Br; 9, X = I), which showed the helical structure in solid state because of intramolecular hydrogen bonding, whereas similar reactions of 1 with 4 equiv of copper halides also produced 1D-coordination polymers, [(Cu(2)X(2))(2){1,3-C(6)H(4){OP(μ-N(t)Bu)(2)PN(H)(t)Bu}(2)}](n) (10, X = Cl; 11, X = Br; 12, X = I), but containing Cu(2)X(2) rhomboids instead of CuX linkers. The crystal structures of 1, 2a, 2b, 4, 7-9, and 12 were established by X-ray diffraction studies.     

Palladium‐Catalyzed Heteroarylation and Concomitant ortho‐Alkylation of Aryl Iodides

Three‐component couplings were achieved from common aryl halides, alkyl halides, and heteroarenes under palladium and norbornene co‐catalysis. The reaction forges hindered aryl–heteroaryl bonds and introduces ortho‐alkyl groups to aryl rings. Various heterocycles such as oxazoles, thiazoles and thiophenes underwent efficient coupling. The heteroarenes were deprotonated in situ by bases without the assistance of palladium catalysts.     

Reactions of a gallium(II)-diazabutadiene dimer, [{{[(H)C(Bu(t))N]2}GaI}2], with [ME(SiMe3)2] (M = Li or Na; E = N, P, or As): structural, EPR, and ENDOR characterization of paramagnetic gallium(III) pnictide complexes

The reactions of the paramagnetic gallium(II) complex [{(Bu(t)-DAB)GaI}2] (Bu(t)-DAB = {(Bu(t))NC(H)}2) with the alkali metal pnictides [ME(SiMe3)2] (M = Li or Na; E = N, P, or As) have been carried out under a range of stoichiometries. The 1:2 reactions have led to a series of paramagnetic gallium(III)-pnictide complexes, [(Bu(t)-DAB)Ga{E(SiMe3)2}I] (E = N, P, or As), while two of the 1:4 reactions afforded [(Bu(t)-DAB)Ga{E(SiMe3)2}2] (E = P or As). In contrast, treatment of [{(Bu(t)-DAB)GaI}2] with 4 equiv of [NaN(SiMe3)2] resulted in a novel gallium heterocycle coupling reaction and the formation of the diradical species [(Bu(t)-DAB)Ga{N(SiMe3)2}{[CC(H)N2(Bu(t))2]Ga[N(SiMe3)2]CH3}]. The mechanism of this unusual reaction has been explored, and evidence suggests it involves an intramolecular transmethylation reaction. The X-ray crystal structures of all prepared complexes are reported, and all have been characterized by EPR and ENDOR spectroscopies. The observed spin Hamiltonian parameters provide a detailed picture of the distribution of the unpaired spin density over the molecular frameworks of the complexes.     

Zinc trimethylsilylamide as a mild ammonia equivalent and base for the amination of aryl halides and triflates

[reaction: see text] We report that Zn[N(SiMe(3))(2)](2) is a mild ammonia equivalent and base for the palladium-catalyzed amination of aryl halides and triflates. In contrast to LiN(SiMe(3))(2), the combination of Zn[N(SiMe(3))(2)](2) and LiCl coupled with aryl halides and triflates containing base-sensitive functionality in high yields. In addition, aryl bromides coupled with aryl and alkylamines with the combination of Zn[N(SiMe(3))(2)](2) and LiCl as base. These aminations occurred without racemization of the enolizable stereocenter of an optically active ester.     

New air-stable catalysts for general and efficient suzuki-miyaura cross-coupling reactions of heteroaryl chlorides

[reaction: see text] New air-stable PdCl(2){P(t)Bu(2)(p-R-Ph)}(2) (R = H, NMe(2), CF(3),) complexes represent simple, general, and efficient catalysts for the Suzuki-Miyaura cross-coupling reactions of aryl halides including five-membered heteroaryl halides and heteroatom-substituted six-membered heteroaryl chlorides with a diverse range of arylboronic acids. High product yields (89-99% isolated yields) and turn-over-numbers (10,000 TON) are observed.     

A new palladium complex supported on magnetic nanoparticles and applied as an catalyst in amination of aryl halides,Heck and Suzuki reactions

A simple, efficient and less expensive protocol for the phosphine-free C–C coupling reactions and synthesis of anilines in the presence of 2-aminobenzamide complex of palladium supported on Fe₃O₄ magnetic nanoparticles (Pd(0)-ABA-Fe₃O₄) has been reported. The Suzuki reaction was carried out in water or PEG using phenylboronic acid (PhB(OH)₂) or sodium tetraphenyl borate (NaBPh₄). Pd(0)-ABA-Fe₃O₄ has been found promising for Heck reaction of butyl acrylate, styrene or acrylonitrile with aryl halides (including Cl, Br and I). Also, Pd(0)-ABA-Fe₃O₄ has been found as efficient catalyst for the amination of aryl halides using aqueous ammonia. The products have been obtained in short reaction times and high yields. The catalyst was easily separated using an external magnet from the reaction mixture and reused for several runs without significant loss of its catalytic efficiency or palladium leaching. The leaching of catalyst has been examined by hot filtration and ICP-OES technique. The nanomagnetical catalyst was characterized by FTIR, TGA, XRD, VSM, TEM, SEM, EDS, DLS and ICP-OES techniques.     

SBA-15-functionalized palladium complex partially confined with ionic liquid: an efficient and reusable catalyst system for aqueous-phase Suzuki reaction

A novel SBA-15 functionalized palladium complex partially confined with 1-butyl-3-methylimidazolium hexafluorophosphate ionic liquid (Material 4) was found to be a very efficient and reusable catalyst in the Suzuki-Miyaura coupling reaction of aryl halides including aryl chlorides and heteroaryl halides with different aryl boronic acids under aqueous conditions without any organic co-solvents. Our studies showed that 4 is a more efficient catalyst in comparison with the catalyst not containing IL or catalyst with a higher ratio of IL. The materials were characterized by N(2)-sorption analysis, TGA and transmission electron microscopy before and after catalysis. While our studies showed that the catalyst can be successfully recycled and reused in at least 4 reaction runs, in contrast, several poisoning experiments and kinetic studies provide the notion that homogeneous (dissolved) species are responsible for the observed catalysis.     

Efficient Stille cross-coupling reaction using aryl chlorides or bromides in water

An efficient Stille cross-coupling reaction using a variety of aryl halides in neat water has been developed. Employing palladium-phosphinous acid catalyst [(t-Bu)(2)P(OH)](2)PdCl(2) allows formation of biaryls from aryl chlorides and bromides in good to high yields. Functional groups such as ketones and nitriles are tolerated, and organic cosolvents are not required. The air stability and solubility in water of the palladium complexes used in this study facilitate operation of the coupling reaction and product isolation. The feasibility of catalyst recycling has also been demonstrated.     

钯催化偶联-消去法合成芳基末端炔的研究进展

钯催化偶联-消去法合成芳基末端炔的研究进展;芳炔;偶联反应;钯催化剂;合成;综述     

Synthesis and structures of aluminum and magnesium complexes of tetraimidophosphates and trisamidothiophosphates: EPR and DFT investigations of the persistent neutral radicals {Me2Al[(mu-NR)(mu-NtBu)P(mu-NtBu)2]Li(THF)2}(*) (R = SiMe3, tBu)

Reactions of (RNH)(3)PNSiMe(3) (3a, R = (t)()Bu; 3b, R = Cy) with trimethylaluminum result in the formation of {Me(2)Al(mu-N(t)Bu)(mu-NSiMe(3))P(NH(t)()Bu)(2)]} (4) and the dimeric trisimidometaphosphate {Me(2)Al[(mu-NCy)(mu-NSiMe(3))P(mu-NCy)(2)P(mu-NCy)(mu-NSiMe(3))]AlMe(2)} (5a), respectively. The reaction of SP(NH(t)Bu)(3) (2a) with 1 or 2 equiv of AlMe(3) yields {Me(2)Al[(mu-S)(mu-N(t)Bu)P(NH(t)()Bu)(2)]} (7) and {Me(2)Al[(mu-S)(mu-N(t)()Bu)P(mu-NH(t)Bu)(mu-N(t)Bu)]AlMe(2)} (8), respectively. Metalation of 4 with (n)()BuLi produces the heterobimetallic species {Me(2)Al[(mu-N(t)Bu)(mu-NSiMe(3))P(mu-NH(t)()Bu)(mu-N(t)()Bu)]Li(THF)(2)} (9a) and {[Me(2)Al][Li](2)[P(N(t)Bu)(3)(NSiMe(3))]} (10) sequentially; in THF solutions, solvation of 10 yields an ion pair containing a spirocyclic tetraimidophosphate monoanion. Similarly, the reaction of ((t)BuNH)(3)PN(t)()Bu with AlMe(3) followed by 2 equiv of (n)BuLi generates {Me(2)Al[(mu-N(t)Bu)(2)P(mu(2)-N(t)Bu)(2)(mu(2)-THF)[Li(THF)](2)} (11a). Stoichiometric oxidations of 10 and 11a with iodine yield the neutral spirocyclic radicals {Me(2)Al[(mu-NR)(mu-N(t)Bu)P(mu-N(t)Bu)(2)]Li(THF)(2)}(*) (13a, R = SiMe(3); 14a, R = (t)Bu), which have been characterized by electron paramagnetic resonance spectroscopy. Density functional theory calculations confirm the retention of the spirocyclic structure and indicate that the spin density in these radicals is concentrated on the nitrogen atoms of the PN(2)Li ring. When 3a or 3b is treated with 0.5 equiv of dibutylmagnesium, the complexes {Mg[(mu-N(t)()Bu)(mu-NH(t)()Bu)P(NH(t)Bu)(NSiMe(3))](2)} (15) and {Mg[(mu-NCy)(mu-NSiMe(3))P(NHCy)(2)](2)} (16) are obtained, respectively. The addition of 0.5 equiv of MgBu(2) to 2a results in the formation of {Mg[(mu-S)(mu-N(t)()Bu)P(NH(t)Bu)(2)](2)} (17), which produces the hexameric species {[MgOH][(mu-S)(mu-N(t)()Bu)P(NH(t)Bu)(2)]}(6) (18) upon hydrolysis. Compounds 4, 5a, 7-11a, and 15-17 have been characterized by multinuclear ((1)H, (13)C, and (31)P) NMR spectroscopy and, in the case of 5a, 9a.2THF, 11a, and 18, by X-ray crystallography.     

Fabrication of covalently functionalized mesoporous silica core–shell magnetite nanoparticles with palladium(II) acetylacetonate: application as a magnetically separable nanocatalyst for Suzuki cross‐coupling reaction of acyl halides with boronic acids

We report the preparation of supported palladium(II) acetylacetonate, Pd(acac)₂, coordinated by pendant acac groups, by reacting palladium acetate with acac‐functionalized doubly silica‐coated magnetic nanoparticles. The solid support consists of an amorphous silica‐coated (as magnetite protecting layer) magnetite core and a mesoporous silica shell. The magnetically separable palladium nanocatalyst is active for Suzuki cross‐coupling reaction of acyl halides with boronic acids. The catalyst is simply isolated from the reaction mixture that allows fast and efficient isolation of product and catalyst compared to traditional methods that generally make use of time‐ and solvent‐consuming procedures. Copyright © 2015 John Wiley & Sons, Ltd.     

N-杂环卡宾Pd络合物的合成及其在Buchwald-Hartwig反应中的应用

合成鉴定了二个N-杂环卡宾环金属Pd络合物[1,3-N,N’-双{2,6-二取代基苯基}咪唑基-2-卡宾][N,N-二甲基卞胺-2-C,N]氯化钯(Ⅱ)(3a：取代基 = 异丙基；和3b：取代基 = 甲基)，评价了它们在氯代芳烃和各种胺偶联反应中的催化性能。发现NaOBu-t是效果较好的碱，及Pd周围有较大的立体位阻的3a在4-甲基氯苯与吗啡啉反应中较3b有更好的催化性能.     

Dihydrogen activation with (t)Bu3P/B(C6F5)3: a chemically competent indirect mechanism via in situ-generated p-(t)Bu2P-C6F4-B(C6F5)2

A chemically competent indirect pathway for the activation of dihydrogen by the nonmetal Lewis acid/Lewis base pair (t)Bu(3)P/B(C(6)F(5))(3) is described. The reaction between (t)Bu(3)P and B(C(6)F(5))(3) produces [(t)Bu(3)PH](+)[FB(C(6)F(5))(3)](-) and the known phosphinoborane p-(t)Bu(2)P-C(6)F(4)-B(C(6)F(5))(2) (1-(t)Bu) with elimination of isobutylene. At 1:1 stoichiometry, 1-(t)Bu is produced rapidly in detectable quantities and can act as a catalyst for the formation of [(t)Bu(3)PH](+)[HB(C(6)F(5))(3)](-) from (t)Bu(3)P and B(C(6)F(5))(3) in the presence of H(2). The extent to which this indirect path competes with the direct path is explored.