New hierarchically porous titania monoliths for chromatographic separation media

Separation media based on hierarchically porous titania (TiO₂) monoliths for high‐performance liquid chromatography (HPLC) have been successfully fabricated by the sol–gel process of titanium alkoxide in a mild condition utilizing a chelating agent and mineral salt. The as‐gelled TiO₂ monoliths were subjected to a simple solvent exchange process from ethanol (EtOH) to H₂O followed by drying and calcination. The resultant monolithic TiO₂ columns consist of anatase crystallites with the typical specific surface area of more than 200 m²/g. The resultant monolithic TiO₂ column calcined at 200 and 400°C exhibited a good separation performance for organophosphates as well as for polar benzene derivatives in the normal‐phase mode.     

In‐tube solid‐phase microextraction capillary column packed with mesoporous TiO2 nanoparticles for phosphopeptide analysis

In this study, an in‐tube solid‐phase microextraction column packed with mesoporous TiO₂ nanoparticles, coupled with MALDI–TOF–MS, was applied to the selective enrichment and detection of phosphopeptides in complex biological samples. The mesoporous TiO₂ nanoparticles with high specific surface areas, prepared by a sol–gel and solvothermal method, were injected into the capillary using a slurry packing method with in situ polymerized monolithic segments as frits. Compared with the traditional solid‐phase extraction method, the TiO₂‐packed column with an effective length of 1 cm exhibited excellent selectivity (α‐casein/β‐casein/BSA molar ratio of 1:1:100) and sensitivity (10 fmol of a β‐casein enzymatic hydrolysis sample) for the enrichment of phosphopeptides. These performance characteristics make this system suitable for the detection of phosphorylated peptides in practical biosamples, such as nonfat milk.     

Preparation of P(MBA‐co‐MAA)/Zr(OH)4/P(EGDMA‐co‐MAA)/TiO2 Tetra‐layer Hybrid Microspheres and the Corresponding ZrO2/TiO2 Double‐shelled Hollow Microspheres

Double‐shelled zirconia/titania (ZrO₂/TiO₂) hollow microspheres were prepared by the selective removal of the polymer components via the calcination of the corresponding tetra‐layer poly(N,N′‐methylenebisacryl amide‐co‐methacrylic acid) (P(MBA‐co‐MAA))/Zr(OH)₄/poly(ethyleneglycol dimethacrylate‐co‐methacrylic acid) (P(EGDMA‐co‐MAA))/TiO₂ hybrid microspheres. These tetra‐layer microspheres were synthesized by the combination of the distillation copolymerization of N,N(‐methylenebisacryl amide‐co‐methacrylic acid (MBA) or ethyleneglycol dimethacrylate (EGDMA) crosslinker and methacrylic acid (MAA) for the preparation of polymer core and third‐layer as well as the controlled sol‐gel hydrolysis of inorganic precursors for the construction of zirconium hydroxide (Zr(OH)₄) and titania (TiO₂) layers. The thicknesses of zirconia and titania shell‐layers were conveniently controlled via varying the feed of zirconium n‐butoxide (Zr(OBu)₄) and titanium tetrabutoxide (TBOT) during the sol‐gel hydrolysis, while the sizes of polymer layers were tuned through a multi‐stage distillation precipitation copolymerization. The structure and morphology of the resultant microspheres were characterized by transmission electron microscopy (TEM), X‐ray diffractometer (XRD), X‐ray photoelectronic spectroscopy (XPS), and thermogrametric analysis (TGA).     

Preparation of Cr‐doped TiO2/SiO2 Photocatalysts and their Photocatalytic Properties

Cr‐doped TiO₂/SiO₂ nanostructured materials were prepared employing a layer‐by‐layer assemblym technique. TiO₂ colloids were synthesized by a sol‐gel method using TiCl₄ as a precursor. The experimental results showed that sphere‐type TiO₂ particles on SiO₂ exhibited uniform shape and a narrow size distribution. The amount of Ti (wt %) increased as a function of the number of the coating layers. The coatingv layers was composed of anatase titania nanocrystals at 550 °C. The onset of band‐gap transition for Crdoped TiO₂/SiO₂ showed a red shift compared with that for the undoped TiO₂/SiO₂. And the photocatalytic activity of Cr‐doped TiO₂/SiO₂ was higher than that of undoped sample.     

Organic–inorganic hybrid membranes prepared from the sol–gel process of poly(butyleneadipate‐co‐terephthalate) and TiO2

Organic–inorganic hybrids based on poly(butyleneadipate‐co‐terephthalate)/titanium dioxide (PBAT/TiO₂) hybrid membranes were prepared via a sol–gel process. The PBAT/TiO₂ hybrid membranes were prepared for various PBAT/TiO₂ ratios. The resulting hybrids were characterized with a morphological structure, hydrophilicity, biodegradability, and thermal properties. The results showed that macrovoids underwent a transition into a sponge‐like membrane structure with the addition of TiO₂. After sol–gel transition, a strong interaction between the inorganic network and polymeric chains led to an increase in glass transition temperature (T_g), thermal degrading temperature, and hydrophilicity, and hence a higher biodegradability. According to X‐ray diffraction measurements of the crystal structure of the hybrid, the presence of TiO₂ did not change the crystal structure of PBAT. TiO₂ networks are uniformly dispersed into the PBAT matrix and no aggregation of TiO₂ networks in the hybrid membranes was observed through the small angle X‐ray scattering measurements. Thus, the sol–gel process of PBAT and TiO₂ can be used to prepare a hybrid with higher application temperature and faster biodegradation rate. Copyright © 2008 John Wiley & Sons, Ltd.     

Borated Titania,a New Option for the Selective Enrichment of cis‐Diol Biomolecules

As low abundance cis‐diol biomolecules are of great significance in biological organisms, preparation of materials for the selective enrichment of such compounds is highly favorable for the development of the related proteomics and metabolomics. To this end, we have prepared monolithic borated titania by a non‐aqueous sol‐gel strategy as a new inorganic affinity material for the specific capture of nucleosides, glycopeptides and glycoproteins. Benefiting from the inorganic framework, this material prevented the hydrophobic interference, which was somewhat inevitable for the mainstream organic‐based boronate affinity materials. The prepared material was carefully characterized by scanning electron microscope (SEM), X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy (XPS) and nitrogen‐sorption experiments to investigate the morphology and elemental composition. The excellent performance of borated titania on enrichment of cis‐diol biomolecules was demonstrated by extracting the glycopeptides from horseradish peroxidase (HRP) digestion, standard glycoproteins, and nucleosides from a human‐urine matrix. This kind of inorganic affinity material offers a new option for selective enrichment or separation of cis‐diol biomolecules.     

Li‐doped nanosized TiO2 powder with enhanced photocalatylic acivity under sunlight irradiation

This work reports on the synthesis of Li‐doped TiO₂ nanoparticles using the sol–gel process and solid‐state sintering, and investigates their potential use as a photocatalyst for degradation under sunlight excitation of different organic model compounds in aqueous solution. The structure of the nanocrystals was examined by X‐ray diffraction, UV‐vis ground state diffuse reflectance absorption spectra and X‐ray photoelectron emission spectroscopy. Results showed that samples prepared by sol–gel process and calcined at 400 °C are composed of a mixture of anatase and rutile phases, in contrast to the one prepared by solid‐state sintering, which exhibits an anatase phase with Li being involved in a spinel phase. The photocatalytic degradation of aqueous solutions of different aromatic compounds was successfully achieved under sunlight excitation in presence of Li‐doped TiO₂ prepared via sol–gel process. It was shown that the calcination temperature and the preparation mode greatly affect the photocatalytic efficiency. Copyright © 2010 John Wiley & Sons, Ltd.     

Fast and Efficient Nitration of Salicylic Acid and Some Other Aromatic Compounds over H_3PO_4/TiO_2-ZrO_2 Using Nitric Acid

TiO₂‐ZrO₂ (1/1)‐surf with Ti and Zr molar ratio of 1/1 was prepared with surfactant through a sol‐gel method. The optimum experimental condition was investigated for nitration of salicylic acid. Then, a number of nitration reactions were carried out with a variety of aromatic compounds in the optimum condition. The 25 wt% H₃PO₄/TiO₂‐ZrO₂ (1/1)‐surf catalyst showed good selectivity and yield in a short time for the nitration of salicylic acid and some other aromatic compounds.     

Preparation and Evaluation of a Novel Cellulose Tris(N‐3,5‐dimethylphenylcarbamate) Chiral Stationary Phase

A novel cellulose tris(N‐3,5‐dimethylphenylcarbamate) (CDMPC) chiral stationary phase (CSP) was prepared by coating CDMPC on TiO₂/SiO₂, which was prepared by coating titania nanoparticles on silica through a self‐assemble technique. At first, 2‐hydroxyl‐phenyl acetonitrile and α‐phenylethanol were separated on this new CSP to evaluate the chiral separation ability. Then, two pesticides, matalaxyl and diclofop‐methyl were separated. The influence of the mobile phase composition on the enantioselectivity was discussed, and the repeatability and stability of the CSP were studied too.     

Photocatalytic Activity of TiO2 Nanofibers with Doped La Prepared by Electrospinning Method

La‐TiO₂ nanofibers are prepared by a sol‐gel assisted electrospinning method. The structure and morphology of La‐TiO₂ nanofibers are characterized by X‐ray diffraction (XRD) and scanning electron microscopy (SEM). XRD analysis shows that the weight percentage of anatase and rutile in the 1.5 mol% La‐TiO₂ nanofibers calcined at 600 °C is about 8:2, which is similar to P‐25. The XRD data of La‐TiO₂ nanofibers with different La content shows that La³⁺ dopant has a great inhibition on TiO₂ phase transformation. The photocatalytic activity of the as‐prepared La‐TiO₂ nanofibers is evaluated by photocatalytic decolorization of Methylene Blue (MB) aqueous solution. The results show that the 1.5 mol% La‐TiO₂ nanofibers calcined at 600 °C exhibit high photocatalytic activity, indicating that 600 °C and 1.5 mol% are the appropriate calcination temperature and optimal molar ratio of La to Ti, respectively.     

Synthesis of the (hydroxypropyl)cellulose–titania hybrid nanocomposite as seen by Raman spectroscopy

The nanocomposite of the (hydroxypropyl)cellulose–titania hybrid was prepared using the (hydroxypropyl)cellulose (HPC) and (tetra‐isopropyl)orthotitanate (TIPT) modified by the methacrylic acid (MAA) as a sol–gel precursor. The Raman investigations of the TIPT with MAA mixtures revealed that these mixtures formed an intermolecular complex determined by the non‐hydrolytic condensation of the constituents. In spite of this, the MAA/TIPT precursor can be used as a solvent for the HPC. The high viscosity of the homogenous liquid of HPC in the TIPT/MAA system was obtained and the sol–gel process under an influence of the moisture from the air could be conducted. The Raman investigations of HPC–titania hybrid showed octahedrally coordinated titania atoms [TiO₆] embodied in the HPC environment. Although the chelating bond between the octahedrally coordinated titania [TiO₆] and the MAA still occurred. The nanosize properties of TiO₂ prepared by calcinations of HPC–titania hybrids were studied by the Raman spectroscopy, X‐ray investigations and the scanning electron microscopy (SEM). Copyright © 2007 John Wiley & Sons, Ltd.     

Ultra-low expansion glass from gels

Pyrolysis of mixed titanium and silicon metal halides produces a commercial glass (7.4% TiO₂) with ultra-low thermal expansion that is essentially zero over the temperature range of 0 to 300°C. A colloidal particulate gel process involving potassium silicate, titania sol and formamide gel reagent was found to produce glass compositions with similar low expansion behavior. Due to the strongly basic nature of the precursor solutions, special titania sols had to be prepared that were stable in these alkali silicate solutions. The preferred TiO₂ sols were those containing quaternary ammonium stabilizing counter-ions. These sols served not only as the source of homogeneously distributed titania, but they may also serve as nucleating species that contribute to particle growth and pore size control of the gel network. The large pore (0.3 µm) TiO₂/SiO₂ gel structures were easily dealkalized, dried and sintered to uncracked glass shapes. Plates up to 9.5 cm×6.6 cm× 0.5 cm thick and some intricate cast shapes were produced and their glass properties evaluated.     

Enrichment specificity of micro and nano‐sized titanium and zirconium dioxides particles in phosphopeptide mapping

Owning to their anion‐exchange properties, titanium and zirconium dioxides are widely used in phosphopeptide enrichment and purification protocols. The physical and chemical characteristics of the particles can significantly influence the loading capacity, the capture efficiency and phosphopeptide specificity and thus the outcome of the analyses. Although there are a number of protocols and commercial kits available for phosphopeptide purification, little data are found in the literature on the choice of the enrichment media. Here, we studied the influence of particle size on the affinity capture of phosphopeptides by TiO₂ and ZrO₂. Bovine milk casein derived phosphopeptides were enriched by micro and nanoparticles using a single‐tube in‐solution protocol at different peptide‐to‐beads ratio ranging from 1 : 1 to 1 : 200. Unsupervised hierarchical cluster analysis based on the whole set of Matrix Assisted Laser Desorption/Ionization time‐of‐flight mass spectra of the phosphopeptide enriched samples revealed 62 clustered peptide peaks and shows that nanoparticles have considerably higher enrichment capacity than bulk microparticles. Moreover, ZrO₂ particles have higher enrichment capacity than TiO₂. The selectivity and specificity of the enrichment was studied by monitoring the ion abundances of monophosphorylated, multiphosphorylated and non‐phosphorylated casein‐derived peptide peaks at different peptide‐to‐beads ratios. Comparison of the resulting plots enabled the determination of the optimal peptide‐to‐beads ratios for the different beads studied and showed that nano‐TiO₂ have higher selectivity for phosphopeptides than nano‐ZrO₂ particles. Copyright © 2013 John Wiley & Sons, Ltd.     

Low Temperature Preparation of Titania Coated PAN Fiber and Its Photocatalytical Property

Titania thin film was deposited successfully on polyacrylonitrile (PAN) fiber by the sol‐gel process with the assistance of tetraethyl silicate (TEOS) at low temperature. It was found that the densification and crystallization of the film was a result of the post‐treatment in boiling water because of the hydrolysis of the Si‐O‐Ti bonds and dissolution of the silica component formed in the film. XRD patterns revealed the existence of anatase phase in the continuous titania layer. The product, titania coated polyacrylonitrile fiber (TiO₂/PAN), showed a high photocatalytic property and good repetition on the photodegradation of methylene blue (MB). The proposed method is expected to be used for the preparation of novel photo‐catalysts based on thermally sensitive substrates.     

Structure of TiO2 in TiO2-SiO2 prepared by a complexing agent-assisted sol-gel procedure

Many types of TiO₂-SiO₂ (Ti:Si=50:50 mol%) were prepared by the sol-gel procedure with and without 2-methyl-2, 4-pentanediol (MPD) as an organic ligand. The effect of MPD on the gel structure and the properties of the TiO₂ crystals were studied by XRD and raman spectroscopy, and the effect of the sol standing time on the properties of the TiO₂ crystals were also studied by XRD spectroscopy. In the gels with MPD, anatase of TiO₂ appeared at approximately 580°C, and the crystal structures were similar despite the difference in the gel preparation procedure. The titania gels with MPD were presumed to be dispersed in the silica gel matrix without any Ti-O-Si bond. In the presence of MPD, the formation of titania gels is controlled and the specified TiO₂ crystal is produced.     

Facile preparation of transparent monolithic titania gels utilizing a chelating ligand and mineral salts

Highly homogeneous transparent titania gels have been successfully prepared from titanium alkoxide by a sol–gel method utilizing chelating agent, ethyl acetylacetate (EtAcAc), in the presence of strong acid anions. Only catalytic amount of a strong acid anion suppress the rapid hydrolysis of titanium alkoxide by blocking the nucleophilic attack of HO⁻ and H₂O, and the resultant moderate sol–gel reactions thus afford homogeneous gelation, leading to transparent monolithic titania gels. Gelation time can be widely controlled by changing amounts of water, chelating agent and salt. The ability of salts to suppress the too abrupt sol–gel reactions is strongly dependent on the electronegativity of anions and valence of cations. With employing NH₄NO₃ as a suppressing electrolyte, the obtained titania gels can be converted to pure TiO₂ by simple washing and heat-treatment, and transformations to anatase and rutile structures were found to start at 400 and 600 °C, respectively.     

Surface-modified TiO(2) nanoparticles as affinity probes and as matrices for the rapid analysis of phosphopeptides and proteins in MALDI-TOF-MS

We utilized three different types of TiO₂ nanoparticles (NPs) namely TiO₂‐dopamine, TiO₂‐CdS and bare TiO₂ NPs as multifunctional nanoprobes for the rapid enrichment of phosphopeptides from tryptic digests of α‐ and β‐casein, milk and egg white using a simplified procedure in MALDI‐TOF‐MS. Surface‐modified TiO₂ NPs serve as effective matrices for the analysis of peptides (gramicidin D, HW6, leucine‐enkephalin and methionine‐enkephalin) and proteins (cytochrome c and myoglobin) in MALDI‐TOF‐MS. In the surface‐modified TiO₂ NPs‐based MALDI mass spectra of these analytes (phosphopetides, peptides and proteins), we found that TiO₂‐dopamine and bare TiO₂ NPs provided an efficient platform for the selective and rapid enrichment of phosphopeptides and TiO₂‐CdS NPs efficiently acted as the matrix for background‐free detection of peptides and proteins with improved resolution in MALDI‐MS. We found that the upper detectable mass range is 17 000 Da using TiO₂‐CdS NPs as the matrix. The approach is simple and straightforward for the rapid analysis of phosphopeptides, peptides and proteins by MALDI‐MS in proteome research.     

Synthesis of nanostructured titania/zirconia membrane and investigation of its physical separation and photocatalytic properties in treatment of textile industries wastewater

Nanostructured TiO₂/ZrO₂ composite membranes with varying compositions were obtained by sol–gel technique. The influence of 0–30 mol% zirconia doping on microstructure, water permeability, photocatalytic and physical separation properties, removal of methyl violet of textile industries wastewater and thermal and mechanical stability of titania/zirconia composite membranes was described. Firstly, alumina supports were coated with TiO₂ intermediate layers using the colloidal sol–gel route. The TiO₂/ZrO₂ composite sols were prepared via a polymeric sol–gel method and dip-coated on TiO₂ intermediate layer. The samples were characterized by DLS, TG-DTA, XRD, FTIR, BET-BJH, UV–visible, SEM, TEM and AFM. It was shown that zirconia retards the phase transformation of anatase to rutile until at least 700 °C. The minimum pore size and maximum surface area obtained were 1.2 nm and 153 m²/g, respectively, attributed to the sample with 20 mol% zirconia. The mechanical strength of titania membranes was significantly improved by addition of zirconia. The most methyl violet removal efficiency obtained, with and without UV-irradiation, is 80.8 and 72.6%, respectively, attributed to the sample with 20 mol% zirconia.     

Surface Modification of TiO2 Nanoparticles with Vitamin B12: Relationships between Vitamin B12 Content and Its Optical Properties

Anatase TiO₂ nanoparticles (NPs) with particle size of 10–20 nm were prepared via sol gel technique. The as‐synthesized NPs were immerged in vitamin B₁₂ (VB₁₂) solutions with different concentrations. The in‐ fluences of the solution concentration on photoluminescence and photocatalytic activity of the modified NPs were studied. Fourier transform infrared spectroscopy (FTIR) results demonstrated that TiO₂ NPs adsorb VB₁₂ molecules and that a new band is formed at ～2300 cm^?1. The VB₁₂ loading process led to dimin‐ ishing of the aggregation of NPs and formation of a fibre shape structure. The best photoactivity and PL effect among the modified samples was related to sample ‘d’. The optimum processing conditions to achieve this sample was found to be VB₁₂ concentration of 5 g/L.     

Effect of synthesis conditions on the preparation of titanium dioxides from peroxotitanate solution and their photocatalytic activity

Nanosized TiO₂ particles were prepared by the hydrothermal method from the amorphous powders which were precipitated in an aqueous peroxotitanate solution. The physical properties of the nanosized TiO₂ particles prepared were investigated. We also examined the activity of TiO₂ particles as a photocatalyst on the decomposition of orange II. The titania sol can be successfully crystallized to the anatase phase through hydrothermal aging at temperatures higher than 160°C. The particle size increases from 18 to 26 nm as the synthesis temperature increases from 140 to 200°C. Titania particles prepared at 180°C show the highest activity, and titania particles calcined at 400°C show also the highest activity on the photocatalytic decomposition of orange II.