LED照射光催化剂用于苯、甲苯、乙苯和二甲苯分解(英文)

Studies on the use of gas phase applications of light emitting diodes(LEDs) in photocatalysis are scarce although their photocatalytic decomposition kinetics of environmental pollutants are likely different from those in aqueous solutions.The present study evaluated the use of chips of visible light LEDs to irradiate nitrogen doped titania(N-TiO2) prepared by hydrolysis to decompose gaseous benzene,toluene,ethyl benzene,m-xylene,p-xylene,and o-xylene.Photocatalysts calcined at different temperatures were characterized by various analytical instruments.The degradation efficiency of benzene was close to zero for all conditions.For the other compounds,a conventional 8 W daylight lamp/N-TiO2 unit gave a higher photocatalytic degradation efficiency as compared with that of visible-LED/N-TiO2 units.However,the ratios of degradation efficiency to electric power consumption were higher for the photocatalytic units that used two types of visible-LED lamps(blue and white LEDs).The highest degradation efficiency was observed with the use of a calcination temperature of 350 oC.The average degradation efficiencies for toluene,ethyl benzene,m-xylene,p-xylene,and o-xylene were 35%,68%,94%,and 93%,respectively.The use of blue-and white-LEDs,high light intensity,and low initial concentrations gave high photocatalytic activities for the photocatalytic units using visible-LEDs.The morphological and optical properties of the photocatalysts were correlated to explain the dependence of photocatalytic activity on calcination temperature.The results suggest that visible-LEDs are energy efficient light source for photocatalytic gas phase applications,but the activity depends on the operational conditions.     

Morphology dependent photocatalytic activity of WO3 nanostructures

The shape of nanostructure has important effects on their properties, therefore in this study, we have prepared and characterized three different morphologies of WO3 nanostructures i.e. nanorod, nanosphere and nanoplate for surveying shape effect on their photocatalytic properties toward degradation of Rhodamine B(Rh B) dye.Obtained results show that nanoplate WO3 in comparison with others has the best photocatalytic activity. According to SEM, and photocatalytic degradation results, the reason for this behavior is the sharp edges and corners of WO3 nanoplates. Because of their low coordination number, atoms located in the edges and corners of the WO3 nanoplates have more activity,adsorb more Rh B and therefore give more photocatalytic activity to the WO3 nanoplates. Using of different scavengers showed that hydroxyl radicals are mainly responsible for photocatalytic activity of WO3 nanoplates and nanospheres but for WO3 nanorods, superoxide radicals are the main photocatalytic degradation agents.     

Recent developments in photocatalytic dye degradation upon irradiation with energy-efficient light emitting diodes

Light emitting diodes (LEDs) are gaining recognition as a convenient and energy-efficient light source for photocatalytic application. This review focuses on recent progress in the research and develop...     

Lactic Acid Assisted Solvothermal Synthesis of BiOClxI1-x Solid Solutions as Excellent Visible Light Photocatalysts

A series of BiOClxI1-x(x=0,0.1,0.3,0.5,0.7,0.9,1.0)photocatalysts was firstly prepared by means of a facile solvothermal route with the help of lactic acid.The measured results show that the morphologies of the as-prepared samples are similar sheets with different thickness and diameters.Thinner nanosheets assembled flower-like BiOCI0.5I0.5 solid solution exhibited the highest photocatalytic activity and stability among the prepared samples for the degradation of methylene blue(MB)and methyl orange(MO)under the illumination of visible light.The excellent photocatalytic properties of BiOCI0.5I0.5 could be attributed to the high specific surface area,the suita-ble band gap energy and the lower recombination rate of the electrons and holes.In addition,catalyst BiOCI0.5I0.5 was further used to degradate a more complicated mixed dye(MCH-RhB+MB)system under visible light,displaying an excellent photocatalytic activity.Finally,the photocatalytic mechanism of catalyst BiOCI0.5I0.5 to degradate colorful dyes was proposed.The trapping experiments of active species indicated that the holes are the main active species for the degradation of the mixed dyes.     

Ag/TiO_2/freeze-dried graphene nanocomposite as a high performance photocatalyst under visible light irradiation

Ag/TiO_2/freeze-dried graphene nanocomposites have been prepared via a facile one-step solvothermal method for the photocatalytic degradation of Rh B under visible light irradiation. During the solvothermal process, reduction of graphene oxide and loading of Ag/TiO_2 nanoparticles on graphene sheets were achieved. Investigation of chemical state of products showed that covering of Ag/TiO_2 surface with higher weight ratio of graphene resulting in that Ag metals in Ag/TiO_2 were oxidized to Ag2 O in nanocomposite structure after solvothermal process. Degree of photocatalytic activity enhancement strongly depends on the coverage of Ag/TiO_2 surface by porous graphene. The sample of 1 wt% porous graphene hybridized Ag/TiO_2 showed the highest photocatalytic activity, which is related to high migration efficiency of photoinduced of electrons and reduction of electron–hole recombination rate due to high electrical conductivity of graphene. Expanding of absorption to visible light region was ascribed to surface plasmon resonance effect of Ag metals and presence of graphene. Investigation of photocatalytic performance of formic acid as a dye-less organic pollutant showed that dye sensitization effect of Rh B molecules during evaluation of photocatalytic performance was negligible.     

Achieving UV and visible-light photocatalytic activity enhancement of AgI/BiOIO3 heterostructure:Decomposition for diverse industrial contaminants and high mineralization ability

Heterostructure photocatalyst fabrication is of great significance for promoting the photoreactivity and solar-energy utilization efficiencies. In this work, AgI/BiOIO_3 heterostructure photocatalysts are synthesized by a facile in-situ crystallization of AgI on BiOIO_3. The photocatalytic performance is first surveyed by decomposition of model dye methyl orange(MO) separately with illumination of UV light and visible-light(λ 420 nm). It indicates that AgI/BiOIO_3 shows highly improved photocatalytic activity regardless of the light source, which should be attributed to the matchable band energy levels between AgI and BiOIO_3, benefiting the efficient charge separation. Notably, AgI/BiOIO_3 shows a universal photocatalytic activity for treating diverse antibiotics and phenols, including tetracycline hydrochloride,chlortetracycline hydrochloride, 2,4-dichlorophenol(2,4-DCP), phenol and bisphenol A(BPA), and the strong mineralization ability of AgI/BiOIO_3 was also demonstrated. Additionally, the different mechanisms under UV and visible light irradiation are investigated in detail. This work provides a new reference for design and manipulation of high-performance nonselective heterostructure photocatalyst for environmental purification.     

ZnO nanopowders and their excellent solar light/UV photocatalytic activity on degradation of dye in wastewater

Low-cost and scalable preparation,high photocatalytic activity,and convenient recycle of Zn O nanopowders(NPs)would determine their practical application in purifying wastewater.In this contribution,ZnO NPs were scalably synthesized via the simple reaction of Zn powder with H_2O vapor in autoclave.The structural,morphological and optical properties of the samples were systematically characterized by X-ray diffraction,scanning electron microscopy,Fourier transform infrared spectra,transmission electron microscopy,Micro-Raman,photoluminescence,and ultraviolet-visible spectroscopy.The as-prepared Zn O NPs are composed of nanoparticles with 100–150 nm in diameter,and have a small Brunauer-Emmett-Teller surface area of 6.85 m~2/g.The formation of Zn O nanoparticles is relative to the peeling of H_2 release.Furthermore,the product has big strain-stress leading to the red-shift in the band gap of product,and shows a strong green emission centered at 515 nm revealing enough atomic defects in Zn O NPs.As a comparison with P25,the obtained dust gray Zn O NPs have a strong absorbance in the region of 200–700 nm,suggesting the wide wave-band utilization in sunlight.Based on the traits above,the Zn O NPs show excellent photocatalytic activity on the degradation of rhodamine B(Rh-B)under solar light irradiation,close to that under UV irradiation.Importantly,the Zn O NPs could be well recycled in water due to the quick sedimentation in themselves in solution.The low-cost and scalable preparation,high photocatalytic activity,and convenient recycle of Zn O NPs endow themselves with promising application in purifying wastewater.     

Synthesis and photocatalytic activity of TiO2/conjugated polymer complex nanoparticles

A photocatalyst of nanometer TiO2/conjugated polymer complex was successfully synthesized and characterized by spectroscopic methods and photocatalytic experiments. The complex photocatalyst could be activated by absorbing both ultraviolet and visible light （λ = 190-800 nm）. Methylene blue （MB） could be degraded more efficiently on the complex photocatalyst than on the TiO2 under natural light. The conjugated polymer played a promoting role in the photocatalytic degradation of MB. The calcination temperature had an important effect in degradation of dye and could be summarized as 260℃ 〉 300 ℃ 〉 340 ℃ 〉 220 ℃ 〉 180 ℃.     

Photo-driven water splitting photoelectrochemical cells by tandem organic dye sensitized solar cells with I−/I3− as redox mediator

Dye-sensitized photoelectrochemical tandem cells have shown the promise for light driven hydrogen production from water owing to the low cost,wide absorption spectra in the visible region and ease to process of their constitutive photoelectrode materials.However,most photo-driven water splitting photoelectrochemical cells driven by organic dye sensitized solar cells exhibit unsatisfactory hydrogen evolution rate,primarily attributed to their poor light capturing ability and low photocurrent performance.Here we present the construction of a tandem system consisting of an organic blue-colored S5 sensitizer-based dyesensitized photoelectrochemical cell(DSPEC) wired in series with three spectral-complemental dyes BTA-2,APP-3 and APP-1 sensitizers-based dye-sensitized solar cell(DSC),respectively.The two spectral-complemental chromophores were used in DSC and DSPEC to ensure that the full solar spectrum could be absorbed as much as possible.The results showed that the photocurrent of tandem device was closely related to the open-circuit voltage(Voc) of sensitized DSC,in which the tandem configuration consisting of S5 based DSPEC and BTA-2 based DSC gave the best photocurrent.On this basis,tandem device with the only light energy and no external applied electrical bias was further constructed of BTA-2 based 2-junction DSC and S5 based DSPEC and obtained a photocurrent of 500 μA cm-2 for hydrogen generation.Furthermore,I-/I3-was used as a redox couple between dye regeneration and O2 production on the surface of Pt-IrO2/WO3.The strategy opens up the application of pure organic dyes in DSC/DSPEC tandem device.     

Recent advances in the improvement of g-C3N4 based photocatalytic materials

g-C₃N₄ have been widely used in the fields of photocatalytic hydrogen production,photocatalytic degradation of dyes and oxidative degradation of toxic gases due to their excellent performance.It has attracted extensive attention in recent years due to its highly efficient photocatalytic capacity of hydrogen generation,water oxidation,carbon dioxide reduction and degradation of organic pollutants.Because of the abundant carbon and nitrogen composition of the earth,large-scale production and industrial applications of this material are possible.The modification of this material makes its performance more excellent so that this new material can obtain a steady stream of vitality.These outstanding works have become important materials and milestones on the road to mankind's photocatalytic hydrogen production.This review will begin with the basic idea of designing,synthesizing and improving g-C₃N₄ based photocatalytic materials,and introduce the latest development of g-C₃N₄ photocatalysts in hydrogen production from four aspects of controlling the carbon/nitrogen ratio,morphology,element doping and heterojunction structure of g-C₃N₄ materials.     

Fused silica capillary micro-packed columns in gas chromatography

Summary Flexibility, strength and adsorption inertness of fused-silica capillaries permits their extensive application for the preparation of micro-packed columns in gas chromatography. Decreasing the column diameter (from 0.5 to 0.15 mm) and the diameter of the sorbent particles (from 100 to 5 μm) results in a marked reduction of the height equivalent to a theoretical plate (HETP), as well as in diminishing the dependence of the HETP on the carrier gas flow rate. The chromatographic characteristics of fused-silica capillary micro-packed columns and open-tubular columns are compared. The fused-silica capillary micro-packed column can be used to advantage for performing rapid and trace analyses and have been shown to be adapted for application in gas-solid chromatography. Separation of organic and inorganic compounds on fused-silica capillary micro-packed columns is illustrated by practical examples. Presented at the 15th International Symposium on Chromatography, Nürnberg, October 1984     

Photocatalytic oxidation of phenol in aqueous solutions with oxygen catalyzed by supported metallophthalocyanine catalyst

In this paper, zinc tetraaminophthalocyanine (Zn-APc) was immobilized on cellulosic fiber by covalent bond to obtain a novel cellulosic fiber supported metallophthalocyanine, named Zn-TDTAPc-F. At pH 11, upon visible light irradiation for 6 h in the presence of O2, Zn-TDTAPc-F was found to be highly effective for the degradation of phenol in aqueous solution, and the degradation rate of phenol was more than 95%. HPLC was used to confirm formic acid, fumaric acid and maleic acid as its main degradation products.     

A comparison of H+-restacked nanosheets and nano-scrolls derived from K4Nb6O17for visible-light degra-dation of dyes

H＋-restacked nanosheets and nanoscrolls peeled from K4Nb6O17 display different structures and surface characters. The two restacked samples with increased surface areas have an amazing visible-light response for the photodegradation of dyes, which is superior to commercial TiO2 （P25） and Nb205. By comparison, H＋/nanosheets have a relatively faster photodegradation rate originated from large and smooth basal plane. The work reveals that dye adsorbed on the unfolded nanosheets can effectively harvest sunlight. Due to facile preparation, low-cost and high photocatalytic efficiency, H＋/nanosheets and H＋/nanoscrolls might be used for the visible light-driven degradation of organic dyes as a substitute for TiO2 in industry.     

Synthesis of TiO2 Nanoparticles via a Ti（IV） Complex with Stearic Acid and the Photocatalytic Activity for Organic Oxidation

The nano-sized particles of TiO2 were prepared by thermal decomposition of titanium (IV) tetrabutanoxide complex with stearic acid at 450℃ in the air.It was observed that the amount of stearic acid,used initially for the complex synthesis in 2-propanol at 25℃,had great influence on the physical properties of the prepared TiO2 including crystal structure, the particle size,surface area and the adsorption capacity for organic substrate of a textile dye X3B in eater,and thereafter the photocatalytic activity for the dye oxidation.Some samples displayed lower adsorption capacity for the organic substrate in water than a TiO2 of Degussa p25,but higher photocatalytic activity for the organic oxidation.Possible reason for the observed difference was discussed in the text.     

Recent strategies to improve moisture stability in metal halide perovskites materials and devices

At present,the stability of the new generation of solar cells based on hybrid perovskites is the bottleneck for their practical applications.Photochemical effects,high temperature,ultraviolet light,humidity and other known or still unknown factors might cause reduction of effectiveness or even irreversible loss of materials properties due to decomposition of functional layers within perovskite solar cells(PSCs).These factors alone have a serious impact on each component of the device,while their combinations lead to much more complicated effects and consequences.This review focuses on the stability of PSCs and the degradation of the device in a humid environment.We assess the instability factors and deep-seated principles of evolution of the device structure in a humidity environment with the emphasis on the influence on their interrelations.The related solutions are reviewed from the perspective of the encapsulation,perovskite active layer,carrier transport layer and electrodes.Combined with the latest research,we believe that the waterproof strategy of PSCs requires either tight encapsulation or thorough modifications in the device itself.Therefore,it is important to develop feasible strategies to improve the overall device stability over humid according to the target characteristics of various devices.     

Construction of Z-Scheme In2S3-TiO2 for CO2 Reduction under Concentrated Natural Sunlight

Producing chemical fuels from sunlight enables a sustainable way for energy consumption.Among various solar fuel generation approaches,photocatalytic CO₂ reduction has the advantages of simple structure,mild reaction condition,directly reducing carbon emissions,etc.However,most of the current photocatalytic systems can only absorb the UV-visible spectrum of solar light.Therefore,finding a way to utilize infrared light in the photocatalytic system has attracted more and more attention.Here,a Z-scheme In₂S₃-TiO₂ was constructed for CO₂ reduction under concentrated natural sunlight.The infrared light was used to create a high-temperature environment for photocatalytic reactions.The evolution rates of H2,CO,and C2H5OH reached 262.2,73.9,and 27.56μmol?h^-1?g^-1,respectively,with an overall solar to fuels efficiency of 0.002%.This work provides a composite photocatalyst towards the utilization of full solar light spectrum,and could promote the research on photocatalytic CO₂ reduction.     

用于大肠杆菌消毒的负载型和悬浮型TiO_2催化剂的动力学和催化效率（英文）

TiO2‐mediated photocatalysis is widely used in a variety of applications and products in the envi‐ronmental and energy fields, including photoelectrochemical conversion, self‐cleaning surfaces, and especially water purification systems. The dimensionality of the structure of a TiO2 material can affect its properties, functions, and more specifically, its photocatalytic performance. In this work, the photocatalytic inactivation of Gram‐negative Escherichia coli using three photocatalysts, differ‐ing in their structure and other characteristics, was studied in a batch reactor under UVA light. The aim was to establish the disinfection efficiency of solid TiO2 compared with that of suspended cata‐lysts, widely considered as reference cases for photocatalytic water disinfection. The bacterial inac‐tivation profiles obtained showed that: (1) the photoinactivation was exclusively related to the quantity of photons retained per unit of treated volume, irrespective of the characteristics of the photocatalyst and the emitted light flux densities;(2) across the whole UV light range studied, each of the photocatalytic solids was able to achieve more than 2 log bacterial inactivation with less than 2 h UV irradiation;(3) none of the used catalysts achieved a total bacterial disinfection during the treatment time. For each of the catalysts the quantum yield has been assessed in terms of disinfec‐tion efficiency, the 2D material showed almost the same performance as those of suspended cata‐lysts. This catalyst is promising for supported photocatalysis applications.     

Photocatalytic Degradation of 4-Chlorophenol by Gd-Doped β-Bi2O3 Under Visible Light Irradiation

Chlorophenols are known as persistent organic pollutants.Therefore,research on the removal of chlorophenols has attracted widespread attention.Hereto,the photocatalytic degradation of 4-chlorophenol by Gd-doped β-Bi2O3 under visible light irradiation was studied.The results showed that Gd-doped β-Bi2O3 materials are efficient catalysts for the photocatalytic degradation of chlorophenols,and 2%(atomic traction)Gd-doped β-Bi2O3 exhibits the highest photocatalytic activity for 4-chlorophenol degradation,because doping an appropriate amount of Gd^3+ions can effectively reduce the recombination rate of the photogenerated e^-/h^+pairs and then enhance the photocatalytic performance.When the reaction was carried out at 25 ℃ for 6 h using the 2% Gd-doped/β-Bi2O3 micro/nano materials of 200 mg and at air flow rate of 40 mL/min,the degradation rate of 4-chlorophenol reached 92.3%.Additionally based on the analysis of the products,it was speculated that the dominant photocatalytic degradation mechanism of 4-chlorophenol by Gd-doped β-Bi2O3 under visible light irradiation is an oxidative process involving an attack by the hydroxyl radical.     

Controllable Photoelectric Properties of Carbon Dots and Their Application in Organic Solar Cells

Organic solar cells are a current research hotspot in the energy field because of their advantages of lightness,translucency,roll to roll printing and building integration.With the rapid development of small molecule acceptor materials with high-performance,the efficiency of organic solar cells has been greatly improved.Further improving the device efficiency and stability and reducing the cost of active layer materials will contribute to the industrial development of organic solar cells.As a novel type of carbon nanomaterials,carbon dots gradually show great application potential in the field of organic solar cells due to their advantages of low preparation cost,non-toxicity and excellent photoelectric performance.Firstly,the synthesis and classification of carbon dots are briefly introduced.Secondly,the photoelectric properties of carbon dots and their adjusting,including adjustable surface energy level structure,good film-forming performance and up/down conversion characteristics are summarized.Thirdly,based on these intrinsic properties,the feasibility and advantages of carbon dots used in organic solar cells are discussed.Fourthly,the application progress of carbon dots in the active layer,hole transport layer,electron transport layer,interface modification layer and down-conversion materials of organic solar cells is also reviewed.Finally,the application progress of carbon dots in organic solar cells is prospected.Several further research directions,including in-depth exploration of the controllable preparation of carbon dots and their application in the fields of interface layer and up/down conversion for improving efficiency and stability of device are pointed out.     

Influence and Characterization of Acidity on Fine Silicon Powder Immobilized Photocatalyst

TiO2 photocatalyst was supported with tetrabutyl titanate sol as precursor and fine silicon powder obtained from ferroalloys factory as carder to discuss the influence of pH value of gel precursor on microstructure and activity of photocatalyst in the process of synthesizing nano-TiO2 by using sol-gel method, the purpose of which is to provide fundamental data for the recycle of photocatalytic material. Under the irradiation of ultraviolet light, the photocatalytic degradation rate of methyl orange solution was used to characterize the photocatalytic activity of the sample. The specific surface area of the sample was tested by N2 desorption method, crystal form of TiO2 was analyzed by X-ray powder diffraction, and the microtopography of the sample was observed by scanning electron microscopy. The experimental results showed that the acidity of gel precursor could greatly affect the specific surface area and photocatalytic activity of the photocatalyst, and the optimum pH value of the precursor was determined as 2.0, and at this time the specific surface area of photocatalyst could reach 34.0 m^2/g. In the sample, the proporticn of anatase to rutile is 7：3, which makes l0 mg·L^-1 methyl orange solution fade after irradiation by 15W ultraviolet light for 24 h, and the degradation rate might be up to 98.1%.