Characterization of B2O3 and/or WO3 containing tellurite glasses

Characterization of B₂O₃ and/or WO₃ containing tellurite glasses was realized in the 0.80TeO₂–(0.20 ? x)WO₃ ? xB₂O₃ system (0 ≤ x ≤ 0.20 in molar ratio) by using differential scanning calorimetry, Fourier transform infrared spectroscopy, X-ray diffraction, scanning electron microscopy and energy dispersive X-ray spectrometry techniques. Glasses were prepared with a conventional melt-quenching technique at 750 °C. To recognize the thermal behavior of the glasses, glass transition and crystallization temperatures, glass stability value, glass transition activation energy, fragility parameter were calculated from the thermal analyses. Density, molar volume, oxygen molar volume and oxygen packing density values were determined to investigate the physical properties of glasses. Fourier transform infrared spectra were interpreted in terms of the structural transformations on the glass network, according to the changing B₂O₃ and/or WO₃ content. Crystallization behavior of the glasses was investigated by in situ X-ray diffraction measurements and microstructural characterization was realized by scanning electron microscopy and energy dispersive X-ray spectrometry analyses.     

Effect of B2O3 addition on the thermal properties and density of barium phosphate glasses

Variations in glass transition temperature, onset of crystallization, thermal expansion coefficient, density and molar volume with B₂O₃ concentration were studied in a series of xB₂O₃–(100 − x)Ba(PO₃)₂ glasses with 0–10 mol% B₂O₃. DTA analysis and isothermal treatments for powdered glass samples reveal that ⩾7.5 mol% B₂O₃ addition suppresses surface crystallization during softening process. Raman spectroscopy suggests that the properties are related to the glass structure consisting of PO₄ Q² units with diborate and PO₄–BO₄ groups.     

In2O3 and tin-doped In2O3 nanocrystals prepared by glass crystallization

Glasses in the system Na₂O/B₂O₃/Al₂O₃/In₂O₃/(SnO₂) were melted and subsequently tempered in the range from 540 to 700 °C. This led to the crystallization of In₂O₃, besides also NaBO₂ and Na₂Al₂B₂O₇ were formed. The crystallite sizes were in the range from 12 to 34 nm, depending on the temperature of thermal treatment, as calculated from XRD-line broadening. Crystal sizes determined by TEM were in the same range. Particle size histograms show a narrow crystal size distribution. After crystallization, the glass matrices and the non indium-containing crystalline phases were dissolved in diluted acetic acid. Spectra of the obtained suspensions containing tin-doped In₂O₃ nanocrystals exhibited a sharp UV-cut off, high transmission in the visible range and strongly decreasing transmission at wavelengths >1000 nm.     

Thermal and optical properties of CuO–BaO–B2O3–P2O5 glasses

CuO-doped barium borophosphate glasses in a series of xCuO–(45 − x)BaO–10B₂O₃–45P₂O₅ in molar ratio with x = 0–15 mol% were prepared by a melt-quenching technique. All the glasses had excellent thermal stability against crystallization. Glass transition temperature, thermal expansion coefficient and molar volume decrease with increasing CuO concentration. The linear relationship between the absorption coefficient and CuO concentration exists for a peak wavelength in the transitions of ²A_1g → ²B_1g, ²B_2g → ²B_1g, ²E_g → ²B_1g. The relationship between the properties and glass structure evaluated by Raman spectroscopy is discussed.     

Structural properties of Cr2O3–Fe2O3–P2O5 glasses,Part I

The structural properties of xCr₂O₃–(40 − x)Fe₂O₃–60P₂O₅, 0 ⩽ x ⩽ 10 (mol%) glasses have been investigated by Raman and Mössbauer spectroscopies, X-ray diffraction (XRD) and differential scanning calorimetry (DSC). The Raman spectra show that the addition of up to 5.3 mol% Cr₂O₃ does not produce any changes in the glass structure, which consists predominantly of pyrophosphate, Q¹, units. This is in accordance with O/P ≈ 3.5 for these glasses. The increase in glass density and T_g that occurs with increasing Cr₂O₃ suggests the strengthening of glass network. The Mössbauer spectra indicate that the Fe²⁺/Fe_tot ratio increases from 0.13 to 0.28 with increasing Cr₂O₃ content up to 5.3 mol%, which can be related to an increase in the melting temperature from 1423 to 1473 K. After annealing, the 10Cr₂O₃–30Fe₂O₃–60P₂O₅ (mol%) sample was partially crystallized and contained crystalline β-CrPO₄ and Fe₃(P₂O₇)₂. The SEM and AFM micrographs of the partially crystallized sample revealed randomly distributed crystals embedded in a homogeneous glass matrix. EDS analysis indicated that the glass matrix was rich in Fe₂O₃ (39.6 mol%) and P₂O₅ (54.9 mol%), but contained only 5.5 mol% of Cr₂O₃. These results suggest that the maximum solubility of chromium in these iron phosphate melts is 5.5 mol% Cr₂O₃.     

Non-isothermal crystallization kinetic studies on MgO–Al2O3–SiO2–TiO2 glass

Thermal stability and crystallization kinetics of the glass 21% MgO, 21.36% Al₂O₃, 53.32% SiO₂ and 4.11% TiO₂ (mol%) has been studied using differential thermal analysis (DTA), dilatometry and X-ray diffraction (XRD). Glass in both bulk and frit forms were produced by melting in platinum crucible at 1600 °C for 1–2 h. From variation of DTA peak maximum temperature with heating rate, the activation energies of crystallization were calculated to be 340 kJ mol⁻¹ and 498 kJ mol⁻¹ for first and second crystallization exotherms, respectively. Crystallization of bulk glass was carried out at various temperatures and for different time durations in the range of 850–1000 °C. The influence of the addition of TiO₂ on the crystallization sequence of the glass was experimentally determined and discussed.     

Aluminoborate and aluminoborosilicate glasses with high chemical durability and the effect of P2O5 additions on the properties

Several series of SrTiO₃–aluminoborate and SrTiO₃–aluminoborosilicate glasses were prepared, which exhibited low corrosion rates in water at 90 °C. The additions of up to 9 mol% P₂O₅ to these glasses were found to significantly improve the chemical durability. The weight loss rate of a glass with the nominal composition (mol%) 15SrO–15TiO₂–23.3Al₂O₃–46.7B₂O₃ decreased by over two orders of magnitude with the additions of up to 9 mol% P₂O₅. In contrast, P₂O₅-additions increased the dissolution rate of the silicate analog of the initial borate glass, 15SrO–15TiO₂–23Al₂O₃–47SiO₂. The positive effect of small P₂O₅ additions on the chemical durability of the aluminoborate glasses may be attributed to the replacement of BO₃ units by BO₄ units in the glass network, as indicated by infrared and Raman spectra.     

Effects of modifier additions on the thermal properties,chemical durability,oxidation state and structure of iron phosphate glasses

Modified iron phosphate glasses have been prepared with nominal molar compositions [(1?x)·(0.6P₂O₅–0.4Fe₂O₃)]·xR_ySO₄, where x = 0–0.5 in increments of 0.1 and R = Li, Na, K, Mg, Ca, Ba, or Pb and y = 1 or 2. In most cases the vast majority or all of the sulfate volatalizes and quarternary P₂O₅–Fe₂O₃–FeO–R_yO_z glasses or partially crystalline materials are formed. Here we have characterized the structure, thermal properties, chemical durability and redox state of these materials. Raman spectroscopy indicates that increasing modifier oxide additions result in depolymerization of the phosphate network such that the average value of i, the number of bridging oxygens per –(PO₄)– tetrahedron, and expressed as Qⁱ, decreases. Differences have been observed between the structural effects of different modifier types but these are secondary to the amount of modifier added. Alkali additions have little effect on density; slightly increasing T_g and T_d; increasing α and T_liq; and promoting bulk crystallization at temperatures of 600–700 °C. Additions of divalent cations increase density, α, T_g, T_d, T_liq and promote bulk crystallization at temperatures of 700–800 °C. Overall the addition of divalent cations has a less deleterious effect on glass stability than alkali additions. ⁵⁷Fe Mössbauer spectroscopy confirms that iron is present as Fe²⁺ and Fe³⁺ ions which primarily occupy distorted octahedral sites. This is consistent with accepted structural models for iron phosphate glasses. The iron redox ratio, Fe²⁺/ΣFe, has a value of 0.13–0.29 for the glasses studied. The base glass exhibits a very low aqueous leach rate when measured by Product Consistency Test B, a standard durability test for nuclear waste glasses. The addition of high quantities of alkali oxide (30–40 mol% R₂O) to the base glass increases leach rates, but only to levels comparable with those measured for a commercial soda-lime-silica glass and for a surrogate nuclear waste-loaded borosilicate glass. Divalent cation additions decrease aqueous leach rates and large additions (30–50 mol% RO) provide exceptionally low leach rates that are 2–3 orders of magnitude lower than have been measured for the surrogate waste-loaded borosilicate glass. The P₂O₅–Fe₂O₃–FeO–BaO glasses reported here show particular promise as they are ultra-durable, thermally stable, low-melting glasses with a large glass-forming compositional range.     

Thermal expansion of glass–ceramics in the system BaO/Al2O3/B2O3

Glasses in the system BaO/Al₂O₃/B₂O₃ with and without the addition of platinum were melted. In one sample series, the BaO-concentration was varied while the ratio [Al₂O₃]/[B₂O₃] was kept constant. In another sample series, the [BaO]/[Al₂O₃]-ratio (= 0.9) was kept constant and the B₂O₃ concentration was varied. The samples were thermally treated at 720 °C for 24 h and subsequently at 780 °C for 4 h. In most thermally treated samples, the crystalline phase BaO · Al₂O₃ · B₂O₃ occurred. At some compositions, the platinum-doped samples showed larger concentrations of the crystalline phases. The most remarkable property of the obtained glass–ceramics is their zero or negative thermal expansion coefficient. Here, notable differences were observed: samples with fine grained microstructures showed thermal expansion coefficients approximately zero up to temperatures of around 80 °C. By contrast, samples with coarser microstructures and large spheroidal crystals exhibit negative expansion coefficients up to temperatures of around 280–375 °C. The thermal expansions of these samples were close to those of the mean thermal expansion of the unit cell of the BaO · Al₂O₃ · B₂O₃ phase. The thermal expansion of the fine grained samples was approximately equal to that of the crystallographic a-axis of the BaO · Al₂O₃ · B₂O₃ phase.     

Electrical properties of SrBi2(Nb0.7V0.3)2O9−δ in the SrO–Bi2O3–0.7Nb2O5–0.3V2O5–Li2B4O7 glass system

Glasses in the system (100 − x)Li₂B₄O₇–x(SrO–Bi₂O₃–0.7Nb₂O₅–0.3V₂O₅) (where x = 10, 30 and 50, in molar ratio) were fabricated via melt quenching technique. The compositional dependence of the glass transition (T_g) and crystallization (T_cr) temperatures was determined by differential thermal analysis. The as-quenched glasses on heat-treatment at 783 K for 6 h yielded monophasic crystalline strontium bismuth niobate doped with vanadium (SrBi₂(Nb_0.7V_0.3)₂O_9−δ (SBVN)) in lithium borate (Li₂B₄O₇ (LBO)) glass matrix. The formation of nanocrystalline layered perovskite SBVN phase was preceded by the fluorite phase as established by both the X-ray powder diffraction (XRD) and transmission electron microscopy (TEM). The dielectric constants for both the as-quenched glass and glass–nanocrystal composite increased with increasing temperature in the 300–873 K range, exhibiting a maximum in the vicinity of the crystallization temperature of the host glass matrix. The electrical behavior of the glasses and glass–nanocrystal composites was characterized using impedance spectroscopy.     

Glass-ceramics in the system BaO/TiO2(ZrO2)/Al2O3/B2O3 and their thermal expansion

Glasses in the system BaO/TiO₂(ZrO₂)/Al₂O₃/B₂O₃ were melted from the raw materials with and without the addition of platinum. They were crystallized in two steps at 720 and 780 °C. TiO₂ does not act as nucleating agent in this system, but widely prevents crystallization. Samples additionally doped with platinum show the crystallization of BaAl₂B₂O₇. However, samples containing equimolar quantities of TiO₂ and ZrO₂ showed the crystallization of this phase without the addition of platinum. The thermal expansion coefficients of samples with TiO₂-concentration ⩽7 mol% or TiO₂/ZrO₂-concentrations ⩽5 mol% exhibit zero or even slightly negative thermal expansion coefficients.     

Preparation and characterization of CuO doped Bi2O3–B2O3–BaO–ZnO glass system for transparent dielectric layer

The electrical, thermal, optical, and morphological properties of CUO doped Bi₂O₃–B₂O₃–BaO–ZnO glasses were studied as a PbO-free, low firing transparent dielectric layer for plasma display panels (PDP). CuO improved the transmittance of Bi₂O₃–B₂O₃–BaO–ZnO by up to 84% in the visible region, eliminating a yellowish color typical of Bi₂O₃–B₂O₃–BaO–ZnO. A slight absorption within the near infrared (NIR) region was also observed. The glass transition temperature (T_g), thermal coefficient of expansion (TCE), and root-mean square (rms) roughness of 0.005 wt% CuO doped Bi₂O₃–B₂O₃–BaO–ZnO were found to be 455 °C, 81.4 × 10⁻⁷/K, respectively, and 162 ± 14 Å, which satisfied the requirements for a transparent dielectric layer for PDP application.     

Evolution of nanocrystalline BaBi2Nb2O9 in Li2B4O7–BaO–Bi2O3–Nb2O5 glass system

Transparent glasses and glass nano crystal composites (GNCs) of various compositions in the system (100 − x)Li₂B₄O₇–x(BaO–Bi₂O₃–Nb₂O₅) (where x = 10, 20, and 30 in molar ratio) were fabricated via splat-quenching technique. The glassy nature of the as-quenched samples was established by differential thermal analyses. X-ray powder diffraction and transmission electron microscopic (TEM) studies confirmed the formation of layered perovskite BBN via a fluorite like phase. TEM studies revealed the presence of 10 nm sized spherical crystallites of fluorite like BaBi₂Nb₂O₉ phase in the glassy matrix of Li₂B₄O₇ (LBO). The influence of composition on the dielectric and the optical properties (transmission, optical band gap) of these samples has been investigated.     

Structural and magnetic investigations of Fe2O3–TeO2 glasses

A series of tellurite glasses containing Fe₂O₃ with the nominal composition x(Fe₂O₃)–(1−x)(TeO₂), where x = 0.05, 0.10, 0.15, and 0.20, have been synthesized and investigated using X-ray photoelectron spectroscopy (XPS) and magnetization techniques. The Te 3d core level spectra for all glass samples show symmetrical peaks at essentially the same binding energies as measured for TeO₂ indicating that the chemical environment of the Te atoms in these glasses does not vary significantly with the addition of Fe₂O₃. Furthermore, the full-width at half-maximum (FWHM) of each peak does not vary with increasing Fe₂O₃ content which suggests that the Te ions exist in a single configuration, namely TeO₄ trigonal bipyramid (tbp). The O 1s spectra are narrow and symmetric for all compositions such that oxygen atoms in the Te–O–Te, Fe–O–Fe and Te–O–Fe configurations must have similar binding energies. The analysis of the Fe 3p spectra indicates the presence of Fe³⁺ ions only, which is consistent with the valence state of the Fe ions determined from magnetic susceptibility measurements.     

Glass transition,thermal expansion and relaxation in B2O3 glass measured by time-resolved X-ray diffraction

In situ heating experiments using high-energy, high-intensity synchrotron radiation, can be successfully designed to study structural evolution with temperature of glassy materials. Coherent diffraction from glassy materials forms a succession of halos or diffraction maxima in reciprocal space and the variation with temperature, of the wave-vector Q_max or angular position of the first diffracted intensity I(Q_max) maximum below T_g can be used to determine the iso-structural volume expansion. In the present work we have obtained synchrotron X-ray diffraction patterns in transmission during in situ heating of a B₂O₃ glass. Samples were obtained by melting the B₂O₃ glass rods which were then air-cooled or liquid nitrogen-cooled. The evolution with temperature (and time) of the position of the first diffraction maximum of the diffraction pattern accurately reflected the thermal expansion coefficient and the relaxation behavior of the B₂O₃ glass. Such results allowed determination by diffraction of the glass transition temperature, T_g, at 580 K, as well as information on the structural relaxation during thermal annealing. The total volume changes due to relaxation were measured to be about 1.5 vol.% and 2.5 vol.%, for the air-cooled and the liquid nitrogen-cooled B₂O₃ glass, respectively.     

Preparation of Nd2O3-doped calcium aluminosilicate glasses and thermo-optical and mechanical characterization

The calcium aluminosilicate glass (CAS) is an important class of optical materials due to the many applications envisaged, including its use as active media for glass lasers. In order to study how Nd₂O₃ doping affects the mechanical and the thermo-optical properties of CAS glass, two series of CAS glass, doped with Nd₂O₃ up to 5 wt%, were prepared in a vacuum atmosphere. The rare earth changes the physical properties, and this influence of doping ion content is discussed for both the series of samples in terms of mechanical, thermal, and thermo-optical properties. The study analyzed hardness and elastic moduli, glass transition temperature, crystallization temperature, thermal diffusivity, specific heat, density, thermal conductivity, refractive index, and thermo-optical properties, like temperature coefficient of the optical path length (dS/dT). The results presented provide information about the sample’s structure, and show that for Nd₂O₃ concentration up to 5 wt% there were no significant changes in the glass host material.     

Incorporation of B2O3 in CaO-SiO2-P2O5 bioactive glass system for improving strength of low-temperature co-fired porous glass ceramics

Bioactive glass ceramics (BGCs) have different rates of biodegradation and mechanical properties depending on their chemical compositions and sintering temperatures. The present study was aimed to develop the boron-rich, phosphorus-low CaO–SiO₂–P₂O₅–B₂O₃ bioactive glasses (BG-B_x, X = 0, 10, 20) potentially for improving the mechanical properties of BGCs via low-temperature co-fired process. The B₂O₃-free BG-B₀ shrunk well at ~ 726 °C and melted at over 1050 °C, while the onset shrinking and melting temperatures of the 20 mol% B₂O₃-doped BG-B₂₀ was lowered to ~ 648 °C and ~ 952 °C, respectively. The BG-B₂₀ thermally treated at 850–950 °C was transformed into wollastonite and calcium borate, and crystallization decreased the kinetics but did not inhibit the development of hydroxyapatite on their powder and disc surface when immersed in simulated body fluid. The in vitro degradation in Tris buffer confirmed that the degradation rate markedly increased with increasing boron content in BG-B_x. The compressive strength and flexural strength of the 10% BG-B₂₀-reinforced 45S5 porous BGC sintered at 850 °C was nearly four times than that of 45S5 porous constructs. These studies suggest that the boron-rich, phosphorus-low CaO–SiO₂–P₂O₅–B₂O₃ system is a promising biomaterial and potential low temperature co-fired aid for improving the mechanical and biological properties of porous BGCs.     

Low temperature dielectric dispersion and electrical conductivity studies on Fe2O3 mixed lithium yttrium silicate glasses

Lithium yttrium silicate glasses mixed with different concentrations of Fe₂O₃ of the composition (40 ? x) Li₂O–10Y₂O₃–50SiO₂: x Fe₂O₃, with x = 0.3, 0.5, 0.8, 1.0, 1.2 and 1.5 (all in mol%) were synthesized. Electrical and dielectric properties including dielectric constant, ε′(ω), loss, tan δ, ac conductivity, σ_ac, impedance spectra as well as electric moduli, M(ω), over a wide continuous frequency range of 40 Hz to 10⁶ Hz and in the low temperature range 100 to 360 K were measured as a function of the concentration of Fe₂O₃. The dc conductivity is also evaluated in the temperature range 100 … 360 K. The temperature and frequency dispersions of dielectric constant as well as dielectric loss have been analyzed using space charge polarization model. The ac and dc conductivities have exhibited increasing trend with increasing Fe₂O₃ content beyond 0.5 mol%, whereas the activation energy for the conductivity demonstrated decreasing tendency in this dopant concentration range. Both quantum mechanical tunneling (QMT) and correlated barrier hopping models (CBH) were used for clarification of ac conductivity origin and the corresponding analysis has indicated that CBH model is more appropriate for this glass system. For the better understanding of relaxation dynamics of the electrical properties we have drawn the scaling plots for ac conductivity and also electric moduli. The plots indicated that the relaxation dynamics is independent on temperature but depends on concentration of Fe₂O₃. The dc conductivity is analyzed using small polaron hoping model. The increase of conductivity with the concentration of Fe₂O₃ beyond 0.5 mol% is explained in terms of variations in the redox ratio of iron ions in the glass network. The results were further analyzed quantitatively with the support of experimental data from IR, optical absorption and ESR spectral studies. The overall analysis has indicated that Li₂O–Y₂O₃–SiO₂ glasses containing more than 0.5 mol% of Fe₂O₃ are more suitable for achieving good electrical conductivity in these glasses.     

Glass-forming ability of soda lime borate liquids

We investigate the composition dependence of glass-forming ability (GFA) of a series of iron-containing soda lime borate liquids by substituting Na₂O for B₂O₃. We have characterized GFA by measuring the glass stability against crystallization using a differential scanning calorimeter (DSC). The results show that the GFA decreases when substituting Na₂O for B₂O₃. Moreover, we find that there is no direct link between the kinetic fragility and GFA for the soda lime borate series studied herein. We have also discovered and clarified a striking thermal history dependence of the glass stability against crystallization. In particular, the two glasses containing 20 and 25 Na₂O mol% do not exhibit crystallization exotherms during the second DSC upscan at 10 and 20 K/min following prior slow (10 and 20 K/min) downscans. This indicates that the glass stability of these compositions can be enhanced by cooling their melts to the glassy state slowly, before any reheating. We explain this phenomenon in terms of the thermal history dependence of boron speciation.     

Precipitation of zinc ferrite nanoparticles in the Fe2O3–ZnO–SiO2 glass system

Glass materials in the ZnO–Fe₂O₃–SiO₂ system, containing zinc ferrite nanoparticles, were prepared by the sol–gel method and characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), Mössbauer spectroscopy, AC- and DC-magnetization techniques. The gel samples, dried at 130 °C, were further heat treated in air at 500 and 800 °C. At 500 °C zinc ferrite and hematite nanoparticles, with an average size of approximately 24 nm, were precipitated in the brown and opaque 10ZnO–10Fe₂O₃–80SiO₂ and in the ruby colored transparent 5ZnO–5Fe₂O₃–90SiO₂ and 2.5ZnO–2.5Fe₂O₃–95SiO₂ glass matrices. In the 5ZnO–5Fe₂O₃–90SiO₂ sample the nanoparticles exhibited ferro or ferrimagnetic interactions combined with superparamagnetism with a blocking temperature of approximately 14 K. Heating at 800 °C seems to cause partial dissolution of the zinc ferrite and hematite particles in all the investigated compositions. Accordingly at 800 °C the 5ZnO–5Fe₂O₃–90SiO₂ glass shows a paramagnetic behavior down to 2 K.