“Living” free radical ring-opening copolymerization of 4,7-dimethyl-2-methylene-1,3-dioxepane and conventional vinyl monomers

It is the first report on the atom transfer radical ring-opening copolymerizations of unsaturated cyclic acetal: 4,7-dimethyl-2-methylene-1,3-dioxepane (DMMDO) with conventional vinyl monomers, styrene (St), acrylonitrile (AN) and methyl acrylate (MA) in the presence of ethyl α-bromobutyrate as initiator and CuBr/2,2^′-bipyridyl as catalyst/ligand at 110 °C. ¹H, ¹³C NMR and IR data show that the copolymerizations of DMMDO with St (or AN or MA) yield the copolymers, poly(DMMDO-co-St) [or poly(DMMDO-co-AN) or poly(DMMDO-co-MA)] with narrow molecular weight distribution, and low content of DMMDO in the copolymers for electron-donor St, higher contents of DMMDO for electron-acceptor AN or MA are observed.     

Block copolymerization of 5,6-benzo-2-methylene-1,3-dioxepane with conventional vinyl monomers by ATRP method

Polystyrene-block-poly(5,6-benzo-2-methylene-1,3-dioxepane) (PSt-b-PBMDO), poly(methyl methacrylate)-block-PBMDO (PMMA-b-PBMDO) and poly(methyl acrylate)-block-PBMDO (PMA-b-PBMDO) were synthesized by two-step atom transfer radical polymerization (ATRP) of conventional vinyl monomers, then BMDO. First, the polymerization of St, or MMA, or MA was realized by ATRP with ethyl α-bromobutyrate (EBrB) as initiator in conjunction with CuBr and 2,2^′-bipyridine (bpy). After isolation, polymers with terminal bromine, PSt-Br, PMMA-Br and PMA-Br, were obtained. Second, the ATRP of BMDO was performed by using macroinitiator, PSt-Br (or PMMA-Br, PMA-Br) in the presence of CuBr/bpy. The structures of block copolymers were characterized by 1H NMR spectra. Molecular weight and polydispersity index were determined on gel permeation chromatograph. Among the block copolymers obtained, PMA-b-PBMDO shows the most narrow molecular weight distribution.     

SYNTHESIS OF BLOCK COPOLYMER FROM 5,6 -BENZO-2-METHYLENE-1,3-DIOXEPANE AND METHYL ACRYLATE VIA ATOM TRANSFER RADICAL POLYMERIZATION

Poly(methyl acrylate)-b-poly(5,6-benzo-2-methylene-1, 3-dioxepane) (PMA-b-PBMDO) was synthesized by two-step atom transfer radical polymerization (ATRP). Firstly, ATRP of methyl acrylate (MA) was realized using ethyl α-bromobutyrate (EBrB) as initiator in the presence of CuBr/2,2'-bipyridine. After isolation, poly(methyl acrylate) withterminal bromine (PMA-Br) was synthesized. Secondly, the resulting PMA-Br was used as a macromolecular initiator in theATRP of BMDO. The Structure of block copolymer was characterized by ~1H-NMR spectroscopy. Molecular weight andmolecular weight distribution were determined on a gel permeation chromatograph (GPC).     

BF3·OEt2-initiated polymerization of 2-methylene-1,3-dioxepanes

BF₃·OEt₂-initiated polymerizations of 2-methylene-1,3-dioxepane gave polymers composed of both ring-retained and ring-opened structures. The ring-opening content increased with an increase in polymerization temperature. Poly(4,7-dimethyl-2-methylene-1,3-dioxepane) propagated slower during BF₃·OEt₂-initiated polymerization and had a lower ring-opened content than poly(2-methylene-1,3-dioxepane). The type of acid initiator used also affected the amount of ring opening observed. Stronger acids gave less ring opening. Attempted BF₃·OEt₂-initiated copolymerizations of these seven-membered ring cyclic ketene acetals with isobutyl vinyl ether at room temperature resulted in formation of the two homopolymers. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 873–881, 1998     

不饱和环缩醛与苯乙烯的原子转移自由基共聚合反应

不饱和环状单体与烯类单体共聚所得的共聚物 ,已经或正在开发成一系列新的产品 .例如 ,水解后得到末端带有—OH,— SH,—COOH等官能团的聚苯乙烯、聚乙烯、聚甲基丙烯酸甲酯等的低聚物[1] ,用于制备新型聚酯和聚氨酯 ;与乙烯的共聚物可在细菌作用下彻底分解成脂肪酸或醇 ,可赋予聚合物生物降解活性 ;与双甲基丙烯酸酯等的共混物 ,可用于制作高强度补牙材料[2 ] 等 .以前报道的不饱和环状单体与烯类单体的共聚反应 ,均为无规共聚 ,而且是普通自由基引发聚合 ,不能控制分子量 ,分子量分布很宽 .原子转移自由基聚合是近几年发展起来的实现…     

Cationic ring-opening polymerizations of cyclic ketene acetals initiated by acids at high temperatures

Three unsubstituted cyclic ketene acetals (CKAs), 2-methylene-1,3-dioxolane, 1a , 2-methylene-1,3-dioxane, 2a , and 2-methylene-1,3-dioxepane, 3a , undergo exclusive 1,2-addition polymerization at low temperatures, and only poly(CKAs) are obtained. At higher temperatures, ring-opening polymerization (ROP) can be dominant, and polymers with a mixture of ester units and cyclic ketal units are obtained. When the temperature is raised closer to the ceiling temperature (T_c) of the 1,2-addition propagation reaction, 1,2-addition polymerization becomes reversible and ring-opened units are introduced to the polymer. The ceiling temperature of 1,2-addition polymerization varies with the ring size of the CKAs (lowest for 3a , highest for 2a ). At temperatures below 138°C, 2-methylene-1,3-dioxane, 2a , underwent 1,2-addition polymerization. Insoluble poly(2-methylene-1,3-dioxane) 100% 1,2-addition was obtained. At above 150°C, a soluble polymer was obtained containing a mixture of ring-opened ester units and 1,2-addition cyclic ketal units. 2-Methylene-1,3-dioxolane, 1a , polymerized only by the 1,2-addition route at temperatures below 30°C. At 67–80°C, an insoluble polymer was obtained, which contained mostly 1,2-addition units but small amounts of ester units were detected. At 133°C, a soluble polymer was obtained containing a substantial fraction of ring-opened ester units together with 1,2-addition cyclic ketal units. 2-Methylene-1,3-dioxepane, 3a , underwent partial ROP even at 20°C to give a soluble polymer containing ring-opened ester units and 1,2-addition cyclic ketal units. At −20°C, 3a gave an insoluble polymer with 1,2-addition units exclusively. Several catalysts were able to initiate the ROP of 1a, 2a , and 3a , including RuCl₂(PPh₃)₃, BF₃, TiCl₄, H₂SO₄, H₂SO₄ supported on carbon, (CH₃)₂CHCOOH, and CH₃COOH. The initiation by Lewis acids or protonic acids probably occurs through an initial protonation. The propagation step of the ROP proceeds via an S_N2 mechanism. The chain transfer and termination rates become faster at high temperatures, and this may be the primary reason for the low molecular weights (M_n ≤ 10³) observed for all ring-opening polymers. The effects of temperature, monomer and initiator concentration, water content, and polymerization time on the polymer structure have been investigated during the Ru(PPh₃)₃Cl₂-initiated polymerization of 2a . High monomer concentrations ([M]/[ln]) increase the molecular weight and decreased the amount of ring-opening. Higher initiator concentrations (Ru(PPh₃)₃Cl₂) and longer reaction times increase molecular weight in high temperature reactions. Successful copolymerization of 2a with hexamethylcyclotrisiloxane was initiated by BF₃OEt₂. The copolymer obtained displayed a broad molecular weight distribution; M̄_n = 6,490, M̄_w = 15,100, M̄_z = 44,900. This polymer had about 47 mol % of ( Me₂SiO ) units, 35 mol % of ring-opened units, and 18 mol % 1,2-addition units of 2a . © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3655–3671, 1997     

结构明确的可降解醛基功能化含糖纳米微球的制备

选择双硫代苯乙酸-1-苯基乙酯(PEPD)为RAFT试剂、以过氧化二异丙苯(DCP)为引发剂、在130℃下,茴香醚中实现了1,2:3,4-di-O-异亚丙基-6-O-(2'-甲醛-4'-苯乙烯基)-D-半乳糖(IVDG)和5,6-苯基-2-亚甲基-1,3-二氧七环(BMDO)的"活性"/可控RAFT自由基共聚合.Mn基本上随单体转化率线性增加,整个反应过程保持较窄的分子量分布(Mw/Mn～1.4),表明以上自由基共聚合体系呈现可控特征.1H-NMR的分析进一步证实了聚合物链的末端精细结构.此外,该共聚物经KOH处理后,聚合物的分子量很明显地向低分子量部分移动,且分布变宽,表明IVDG-BMDO共聚物是可以水降解的.经88%甲酸处理后,脱去保护基团,形成两亲性共聚物,该两亲性共聚物不需要外加乳化剂,在水中能够自组装形成含有大量半乳糖的、可生物降解的、醛基功能化的纳米微球.     

Controlled free radical ring-opening polymerization and chain extension of the “living” polymer

Free radical ring-opening polymerization of 2-methylene-1,3-dioxepane (MDP) in the presence of 2,2,6,6-tetramethyl-1-piperidinyloxy free radical (TEMPO) has been achieved to afford a chain polyester (PMDP) with di-t-butyl peroxide (DTBP) as an initiator at 125°C. The polydispersity of the polymers decreases as the concentration of TEMPO is increased. At high TEMPO concentrations, the polydispersity as low as 1.2 was obtained, which is below the theoretical lower limit for a conventional free radical polymerization. A linear relationship between the number-average molecular weight (M_n) and the monomer conversion was observed with the best-fit line passing very close to the origin of the M_n-conversion plot. The isolated and purified TEMPO-capped PMDP polymers have been employed to prepare chain extended polymers upon addition of more MDP monomer. These results are suggestive of the “living” polymerization process. A possible polymerization mechanism might involve thermal homolysis of the TEMPO-PMDP bonds followed by the addition of the monomers. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 761–771, 1998     

Synthesis and characterization of four-armed poly(1,3-dioxepane) tetraol

A new four-armed poly(1,3-dioxepane) tetraol was prepared by cationic ring-opening polymerization of 1,3-dioxepane (DOP) in the presence of 6,6-bis(5-hydroxyl-2-oxapentyl)-4,8-dioxaundecanediol-1,11 (THA) with triflic acid(I) as initiator. The structure of the poly(DOP) tetraol obtained was characterized by ¹H and ¹³C NMR spectra. The molecular weights of the obtained tetraols were controlled by the mole ratio of DOP consumed to initial THA, and it was found that each macromolecule contains only one THA unit on the average. GPC studies showed that the cyclic oligomers in the products were negligible. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2347–2353, 1999     

Preparation and radical ring-opening polymerization of 2-substituted-4-methylene-1,3-dioxolanes

2-Methyl-2-phenyl-4-methylene-1,3-dioxolane ( IIa ), 2-ethyl-2-phenyl-4-methylene-1,3-dioxolane ( IIb ), 2-phenyl-2-(n-propyl)-4-methylene-1,3-dioxolane ( IIc ), 2-phenyl-2-(i-propyl)-4-methylene-1,3-dioxolane ( IId ), 2-(n-heptyl)-2-phenyl-4-methylene-1,3-dioxolane ( IIe ), 2-methyl-2-(2-naphthyl)-4-methylene-1,3-dioxolane ( IIf ), and 2,2-diphenyl-4-methylene-1,3-dioxolane ( IIg ) were prepared and polymerized in the presence of a radical initiator. IIa–IIf were found to undergo vinyl polymerization with ring-opening reaction accompanying the elimination of ketone groups in bulk. IIg was found to undergo the quantitative ring-opening reaction accompanying the elimination of benzophenone in solution to obtain polyketone without any side reaction.     

2-亚甲基-1,3-二氧己烷衍生物的合成及自由基开环聚合

本文报道了四种2-亚甲基-1,3-二氧己烷类单体:4-甲基-2-亚甲基-1,3-二氧己烷(Ⅱ)、4,6-二甲基-2-亚甲基-1,3-二氧己烷(Ⅳ)、5,5-二甲基-2-亚甲基-1,3-二氧己烷(Ⅵ)和5,5-二乙基-2-亚甲基-1,3-二氧己烷(V Ⅲ)的合成以及自由基开环聚合。结果表明,上述单体在聚合过程中出现异构化开环现象。Ⅲ和Ⅳ的甲基位置在环上氧原子的α-碳原子上时,显示对异构化反应的影响比Ⅵ及Ⅷ的甲基和乙基在β-碳原子上时更显著。上述现象与异构化开环形成仲碳自由基中间体的倾向更大有关。 Ⅳ在苯溶液中及过氧化二叔丁基存在下,120℃反应,得到全部是聚-δ-戊内酯骨架结构的聚合物。提出了一种合成聚-δ-戊内酯类链结构的聚酯的新的途径和方法。     

Synthesis of degradable poly(methyl methacrylate) star polymers via RAFT copolymerization with cyclic ketene acetals

Copolymerization of the cyclic ketene acetal 5,6‐benzo‐2‐methylene‐1,3‐dioxepane (BMDO) with methyl methacrylate (MMA) is studied with respect to its copolymerization parameters and the suitability to control BMDO/MMA copolymerizations via the reversible addition‐fragmentation chain transfer (RAFT) technique to obtain linear and 4‐arm star polymers. BMDO shows disparate copolymerization behavior with MMA and r₁ = 0.33 ± 0.06 and r₂ = 6.0 ± 0.8 have been determined for polymerization at 110 °C in anisole from fitting copolymer composition vs. comonomer feed data to the Lewis–Mayo equation. Copolymerization of the two monomers is successful in RAFT polymerization employing a trithiocarbonate control agent. As desired, polymers contain only little amount of polyester units stemming from BMDO units and preliminary degradation experiment show that the polymer degrades slowly, but steadily in aqueous 1 M NaOH dispersion. Within ten days, the polymers are broken down to low molecular weight segments from an initial molecular weight of M_n = 6000 g mol^?1. Star (co)polymerization with an erythritol‐based tetra‐functional RAFT agent following the Z‐group approach proceeds efficiently and polymers with a number‐average molecular weight of 10,000 g mol^?1 are readily obtained that degrade in similar manner as the linear copolymer counterparts. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1633–1641     

Cationic 1,2-vinyl addition polymerization of cyclic ketene acetals initiated by conventional acids

Pure 1,2-addition polymers, poly(2-methylene-1,3-dioxolane), 1b , poly(2-methylene-1,3-dioxane), 2b , and poly(2-methylene-5,5-dimethyl-1,3-dioxane), 3b , were prepared using the cationic initiators H₂SO₄, TiCl₄, BF₃, and also Ru(PPh₃)₃Cl₂. Small ester carbonyl bands in the IR spectra of 1b and 2b were observed when the polymerizations were performed at 80°C ( 1b ) and both 67 and 138°C ( 2b ) using Ru(PPh₃)₃Cl₂. The poly(cyclic ketene acetals) were stable if they were not exposed to acid and water. They were quite thermally stable and did not decompose until 290°C ( 1b ), 240°C ( 2b ), and 294°C ( 3b ). Different chemical shifts for axial and equatorial H and CH₃ on the ketal rings were found in the ¹H NMR spectrum of 3b at room temperature. High molecular weight 3b (M̄_n = 8.68 × 10⁴, M̄_w = 1.31 × 10⁵, M̄_z = 1.57 × 10⁵) was obtained upon cationic initiation by H₂SO₄. Poly(2-methylene-1,3-dioxane), 2b , underwent partial hydrolysis when Ru(PPh₃)₃Cl₂ and water were present in the polymer. The hydrolyzed products were 1,3-propanediol and a polymer containing both poly(2-methylene-1,3-dioxane) and polyketene units. The percentages of these two units in the hydrolyzed polymer were about 32% polyketene and 68% poly(2-methylene-1,3-dioxane). No crosslinked or aromatic structures were observed in the hydrolyzed products. The molecular weight of hydrolyzed polymer was M̄_n = 5740, M̄_w = 7260, and M̄_z = 9060. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3707–3716, 1997     

Synthesis of polyester nanoparticles in miniemulsion obtained by radical ring-opening of BMDO and their potential as biodegradable drug carriers

5,6-Benzo-2-methylene-1,3-dioxepane (BMDO) is used to obtain degradable polymeric nanoparticles via a statistical free-radical copolymerization with MMA and styrene in direct miniemulsion. The nanoparticles are analyzed by means of IR, NMR, DLS, SEM, and TEM. They show excellent cellular uptake and drug delivery properties. The cellular uptake into HeLa cells of particles resulting from copolymerization of BMDO with styrene is drastically enhanced compared to pure polystyrene. As a model drug system, paclitaxel is incorporated in PBMDO particles and its release and the effect on HeLa cells is studied and compared to commercial drug formulations. It is found that a drug delivery system based on PBMDO shows an excellent pharmacological effect.     

Ring-opening polymerization of six- and seven-membered cyclic pseudoureas

The cationic ring-opening polymerization of six-membered cyclic pseudoureas, 2-(1-pyrrolidinyl)- ( 2a ) and 2-morpholino-5,6-dihydro-4H-1,3-oxazine ( 2b ), was examined, which proceeded in two different ways, depending on the nature of initiator. The polymerization of 2 with methyl p-toluenesulfonate or trifluoromethanesulfonate (MeOTf) produced poly[(N-carbamoylimino)trimethylene], while that with benzyl chloride or bromide or methyl iodide gave a polymer consisting of 1,3-diazin-2-one-1,3-diylalkylene unit (the main component) and (N-carbamoylimino)trimethylene unit. The cationic ring-opening polymerization of seven-membered cyclic pseudourea, 2-(1-pyrrolidinyl)-4,5,6,7-tetrahydro-4H-1,3-oxazepine ( 3 ) was also examined. The polymerization of 3 with MeOTf as initiator gave poly{[N-(1-pyrrolidinycarbonyl)imino]tetra-methylene}. With benzyl chloride, on the other hand, no polymerization of 3 proceeded but, instead, the quantitative isomerization of 3 to 1,1′-carbonyldipyrrolidine took place. The polymerization mechanism of 2 and 3 as well as the isomerization mechanism of 3 were discussed with comparing them to the polymerization mechanism of five-membered pseudoureas. © 1977 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 933–945, 1997     

Mechanism of dispersion polymerization of L-lactide initiated with 2,2-dibutyl-2-stanna-1,3-dioxepane

 Biodegradable polyester microspheres were synthesized directly by ring-opening polymerization of l-lactide initiated with 2,2-dibutyl-2-stanna-1,3-dioxepane. The polymerizations were carried out at 95 °C in a mixture of organic solvents (heptane/1,4–dioxane 4:1 v:v), in the presence of poly(dodecyl acrylate)-g-poly(ɛ-caprolactone) used as a surface-active agent. Under these conditions the poly(L-lactide) synthesized was shaped into microspheres. The absence of new particles in the polymerizations with multistep monomer addition indicated that after the formation of particle seeds the propagation proceeds exclusively inside the microspheres. The mean volume of these microspheres was proportional to the monomer conversion. It was found that regardless of the initiator concentration the average number of poly(L-lactide) macromolecules in one microsphere was 1.84 × 10⁸. Matrix-assisted laser desorption ionization time of flight spectroscopy of poly(L-lactide) in the microspheres indicated that the propagation in the particles was accompanied by intra- and intermolecular transesterification side reactions, resulting in reshuffling of the polymer segments and the formation of cyclic oligomers. Received: 20 December 2000 Accepted: 7 June 2001     

Cationic ring-opening polymerization of 2-isopropenyl-4-methylene-1,3-dioxolane

Preparation and cationic ring-opening polymerization of 2-isopropenyl-4-methylene-1,3-dioxolane ( VI ) was performed. Unsaturated cyclic acetal VI was prepared by dehydrochlorination of 2-isopropenyl-4-chloromethyl-1,3-dioxolane, which was easily obtained from methacrolein and epichlorohydrin, with sodium methoxide at ambient temperature. The cationic polymerization of VI with BF₃OEt₂ or CF₃SO₃H at ?78°C afforded only crosslinked polymers, whereas the polymerization by CH₃SO₃H gave soluble poly(keto-ether) which consisted of units VII containing an isopropenyl group in the side chain and units VIII containing a carbon-carbon double bond in the main chain. The reaction of VI with ethanethiol in the presence of protic acid was also carried out as a model reaction of the polymerization. The reaction initiated by the addition of proton to the 4-methylene group of VI , and quantitative ring-opening isomerization followed by the addition of ethanethiol afforded acyclic ketone IX and X . On the basis of the model reaction, the polymerization mechanism is also discussed. © 1993 John Wiley & Sons, Inc.     

Novel photoinitiated cationic copolymerizations of 4-methylene-2-phenyl-1,3-dioxolane

Photoinitiated polymerization of 4-methylene-2-phenyl-1,3-dioxolane ( 1 ) was carried out using either tris (4-methylphenyl) sulfonium hexafluoroantimonate or 4-decyloxyphenyl phenyliodonium hexafluoroantimonate as initiators. ¹H-NMR analyses confirmed exclusive ring-opening while DSC and SEC were used to determine the glass transition temperatures (T_gs) and molecular weights, respectively. Photoinitiated cationic copolymerizations of 1 were investigated with several acyclic and cyclic monomers. Copolymerization of 1 with vinyl ethers and a spiroorthoester resulted in copolymers whose thermal properties were dependent on comonomer ratios. Copolymers of 1 and dihydrofuran or dihydropyran afforded soluble polymers with T_gs significantly higher than the homopolymer of 1 . © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2207–2219, 1997     

SYTHESIS AND ANIONIC POLYMERIZATION OF 2-METHYL-2-METHOXYCARBONYL-5-METHYLENE-1, 3-DIOXOLAN-4-ONE

A new cyclic monomer, 2-methyl-2-methoxycarbonyl-5-methylene-1,3-dioxolan-4-one,was synthesized successfully. The monomer and intermediate were characterized by ~1H NMR, ~(13)CNMR, INEPT(Intensive Nuclei Enhanced by Polarization Transfer) technique, IR and elementalanalysis. Anionic polymerization of the monomer was carried out in anhydrous THF at -70℃,and 9-fluorenyllithium was used as initiator. The polymer structure was determined by IR, NMRand elemental analysis. Molecular weight of the polymer was estimated by viscosity measurementin DMSO at 30℃.     

Synthesis of Functionally-Terminated Oligomers by Free Radical Ring-Opening Polymerization

Since free radical ring-opening polymerization made it possible to introduce functional groups, such as esters, carbonates, thioesters, and amides, into the backbone of an addition polymer, it was reasoned that simple hydrolysis of these copolymers would produce the desired oligomers that could be terminated with various combinations of hydroxyl, amino, thiol, and carboxy1 groups. Thus the copolymerization of 2-methylene-1,3-dioxepane and styrene (r1=0.021 and r2=22.6) gave a copolymer containing 10 mole-percent of an ester-containing unit with 100% ring opening at 120°C. Hydrolysis of this copolymer gave an oligomer terminated with a hydroxyl group and a carboxylie acid group. Similarly the copolymerization of 2-methylene-1,3-dioxepane and ethylene gave a series of biodegradable polyethylene copolymers containing 2.1 to 10.4% ester-containing units. Hydrolysis of these copolymers gave a series of ethylene oligomers with nine to forty-seven ethylene units and terminated with a hydroxyl group and a carboxylic acid group. By the same general method oligomers of various monomers that are terminated with a methylandno group and a carboxylic acid group from N-methyl-Z-methylene-1,3-oxazolidine and with a thiol group and a carboxyl group from Z-methylene-1,3-oxathiolane.