Stability analysis of functionally graded rectangular plates under nonlinearly varying in-plane loading resting on elastic foundation

In this research work, an exact analytical solution for buckling of functionally graded rectangular plates subjected to non-uniformly distributed in-plane loading acting on two opposite simply supported edges is developed. It is assumed that the plate rests on two-parameter elastic foundation and its material properties vary through the thickness of the plate as a power function. The neutral surface position for such plate is determined, and the classical plate theory based on exact neutral surface position is employed to derive the governing stability equations. Considering Levy-type solution, the buckling equation reduces to an ordinary differential equation with variable coefficients. An exact analytical solution is obtained for this equation in the form of power series using the method of Frobenius. By considering sufficient terms in power series, the critical buckling load of functionally graded plate with different boundary conditions is determined. The accuracy of presented results is verified by appropriate convergence study, and the results are checked with those available in related literature. Furthermore, the effects of power of functionally graded material, aspect ratio, foundation stiffness coefficients and in-plane loading configuration together with different combinations of boundary conditions on the critical buckling load of functionally graded rectangular thin plate are studied.     

Buckling of a pre-compressed or pre-stretched membrane in shear flow

Membranes enclosing capsules and biological cells undergo periodic compression and stretching due to an imparted hydrodynamic traction as they rotate in a shear flow. Compression may cause transient or permanent buckling manifested by the onset of wrinkled shapes. To study the effect of pre-compression and pre-stretching on the critical conditions for buckling, the response of an elastic circular plate flush mounted on a plane wall and deforming under the action of a uniform tangential load due to an over-passing simple shear flow is considered. Working under the auspices of the theory of elastic instability of plates governed by the linear von Kármán equation, an eigenvalue problem is formulated resulting in a fourth-order partial differential equation with position-dependent coefficients parametrized by the Poisson ratio. Solutions are computed by applying Fourier series expansions to derive an infinite system of coupled ordinary differential equations, and then implementing orthogonal collocation. The solution space is illustrated, critical values for buckling are identified, the associated eigenfunctions representing possible modes of deformation are displayed, and the effect of the Poisson ratio is discussed.     

面内阶跃载荷下矩形薄板的塑性动力屈曲

对于面内阶跃载荷作用下矩形薄板的塑性动力屈曲问题,将临界应力和屈曲惯性项指数参数作为双特征参数求解。由相邻平衡准则导出失稳控制方程,由动力屈曲发生瞬间的能量转换和守恒准则,导出波阵面上的屈曲变形补充约束条件。失稳控制方程、边界条件、塑性波阵面上的连续条件和补充约束条件构成了定量求解两个特征参数和动力屈曲模态的完备条件。研究了矩形薄板塑性动力屈曲过程中板的厚宽比、冲击载荷大小、屈曲模态和临界屈曲长度之间的关系。     

On modes of buckling for a plate on an elastic foundation

We study flexural stability of a homogeneous plate compressed in its plane and lying on an elastic foundation. There is an elastic stratum between the plate and the foundation. In the case of homogeneous uniform compression, the linear approximation does not answer the question of the shape of buckling. A geometrically nonlinear approach leads to the conclusion that the buckling shape is of staggered character.     

冲击载荷作用下矩形薄板的弹性动力屈曲

为了研究冲击载荷作用下考虑应力波效应弹性矩形薄板的动力屈曲,根据动力屈曲发生瞬间的能量转换和守恒准则,导出板的屈曲控制方程和波阵面上的补充约束条件,真实的屈曲位移应同时满足控制方程和波阵面上的附加约束条件。满足上述条件,建立了该问题的完整数值解法,对屈曲过程中冲击载荷、屈曲模态和临界屈曲长度之间的关系进行研究,定量计算了横向惯性效应对提高薄板动力屈曲临界应力的贡献。研究表明:板的厚宽比一定时,临界屈曲长度随冲击载荷的增大而减小;由于屈曲时的横向惯性效应,应力波作用下薄板一阶临界力参数是相应边界板的静力失稳临界力参数的1.5倍;随着边界约束逐渐减弱,板临界力参数逐渐减小,动力特征参数逐渐增大。     

正交各向异性薄板的弹塑性屈曲分析

本文应用混合硬化正交各向异性塑性理论和屈曲的能量法则，推导了正交各向异性薄板在面内压缩情况下的弹塑性稳定方程，计算了相应的临界荷载，并讨论几何形状、边界条件及诱导荷载比等对临界应力的影响。分析表明材料的各向异性性质对弹塑性临界应力的有较大的影响。     

Twin-characteristic-parameter solution of axisymmetric dynamic plastic buckling for cylindrical shells under axial compression waves

In the present investigation on the dynamic plastic buckling of cylindrical shells under axial compression waves, the critical axial stress and the exponential parameter of inertia terms in stability equations are treated as a couple of characteristic parameters. The criterion of transformation and conservation of energy in the process of buckling initiation is used to derive the supplementary restraint equation of buckling deformation at the fronts of axial elastic and plastic compression waves. The supplementary restraint equation, stability equations, boundary conditions and continuity conditions constitute the necessary and sufficient conditions of determining the two characteristic parameters. Two characteristic equations are derived for the two characteristic parameters. The critical axial stress or the critical buckling time, the exponential parameter of inertia terms and the initial modes of buckling deformation are calculated quantitatively from the solution of the characteristic equations.     

Mechanical buckling and free vibration of thick functionally graded plates resting on elastic foundation using the higher order B-spline finite strip method

In this study, the mechanical buckling and free vibration of thick rectangular plates made of functionally graded materials (FGMs) resting on elastic foundation subjected to in-plane loading is considered. The third order shear deformation theory (TSDT) is employed to derive the governing equations. It is assumed that the material properties of FGM plates vary smoothly by distribution of power law across the plate thickness. The elastic foundation is modeled by the Winkler and two-parameter Pasternak type of elastic foundation. Based on the spline finite strip method, the fundamental equations for functionally graded plates are obtained by discretizing the plate into some finite strips. The results are achieved by the minimization of the total potential energy and solving the corresponding eigenvalue problem. The governing equations are solved for FGM plates buckling analysis and free vibration, separately. In addition, numerical results for FGM plates with different boundary conditions have been verified by comparing to the analytical solutions in the literature. Furthermore, the effects of different values of the foundation stiffness parameters on the response of the FGM plates are determined and discussed.     

弹性地基上多孔功能梯度材料矩形板的自由振动与临界屈曲载荷分析

多孔功能梯度材料(FGM)构件的特性与孔隙率和孔隙分布形式有密切关系。本文基于经典板理论,考虑不同孔隙分布形式时修正的混合率模型,研究Winkler弹性地基上四边受压多孔FGM矩形板的自由振动与临界屈曲载荷特性。首先利用Hamilton原理和物理中面的定义推导Winkler弹性地基上四边受压多孔FGM矩形板自由振动的控制微分方程并进行无量纲化,然后应用微分变换法(DTM)对无量纲控制微分方程和边界条件进行变换,得到计算无量纲固有频率和临界屈曲载荷的代数特征方程。将问题退化为孔隙率为零时的FGM矩形板并与已有文献进行对比以验证其有效性。最后计算并分析了梯度指数、孔隙率、地基刚度系数、长宽比、四边受压载荷及边界条件对多孔FGM矩形板无量纲固有频率的影响以及各参数对无量纲临界屈曲载荷的影响。     

Application of Ritz functions in buckling analysis of embedded orthotropic circular and elliptical micro/nano-plates based on nonlocal elasticity theory

A continuum model based on the nonlocal theory of elasticity is developed for buckling analysis of embedded orthotropic circular and elliptical micro/nano-plates under uniform in-plane compression. The nanoplate is considered to be rested on two-parameter Winkler-Pasternak elastic foundation. The principle of virtual work is used to derive the governing vibration and stability equations. The weighted residual statements of the equations of motion are performed and the well-known Galerkin method is employed to obtain the nonlocal “Quadratic Functional” for embedded micro/nano-plates. The Ritz functions are taken to form an expression for transverse displacement which satisfies the kinematic boundary conditions. In this way, the entire nanoplate is considered as a single super-continuum element. Employing the Ritz functions eliminates the need for mesh generation and thus large number of degrees of freedom arising in discretization methods such as finite element (FE). The results show obvious dependency of critical buckling loads on the non-locality of the micro/nano elliptical plate, especially, at very small dimensions.     

Supercritical and subcritical buckling bifurcations for a compressible hyperelastic slab subjected to compression

We study the buckling bifurcation of a compressible hyperelastic slab under compression with sliding–sliding end conditions. The combined series-asymptotic expansions method is used to derive the simplified model equations. Linear bifurcation analysis yields the critical stress value of buckling, which gives a non-linear correction to the classical Euler buckling formula. The correction is due to the geometrical non-linearities coupled with the material non-linearities. Then through non-linear bifurcation analysis, the approximate analytical solutions for the post-buckling deformations are obtained. The amplitude of buckling is expressed explicitly in terms of the aspect ratio, the incremental dimensionless engineering stress, the mode of buckling and the material constants. Most importantly, we find that both supercritical and subcritical buckling could occur for compressible materials. The bifurcation type depends on the material constants, the geometry of the slab and the mode numbers.     

Experimental and theoretical study of the buckling of narrow thin plates on an elastic foundation under compression

The paper describes the processes of elastic deformation of thin films under mechanical loading. The film is modeled longitudinally by a compressed plate arranged on an elastic foundation. A computer model of the buckling of the narrow thin plate with a delamination portion located on an elastic foundation is constructed. This paper also touches upon the supercritical behavior of the plate–substrate system. The experiments on the axial compression of a metal strip adhered to a rubber plate are performed, and 2 to 7 buckling modes are obtained therein. The critical loads and buckling modes obtained in the numerical calculations are compared with the experimental data. It is shown that there is the possibility of progressive delamination of the metal plate from the foundation if the critical load is exceeded. It is found that the use of the proposed approach, which, in contrast to other approaches, accounts for the elastic deformation of the substrate, causes the dependence between the critical bending stress and the stiffness of the foundation.     

A theoretical computational model of a plate in hypersonic flow

A theoretical model of an elastic panel in hypersonic flow is derived to be used for design and analysis. The nonlinear von Kármán plate equations are coupled with 1st order Piston Theory and linearized at the nonlinear steady-state deformation due to static pressure differential and thermal loads. Eigenvalue analysis is applied to determine the system’s stability, natural frequencies and mode shapes. Numerically time marching the equations provides transient response prediction which can be used to estimate limit cycle oscillation amplitude, frequency and time to onset. The model’s predictive capability is assessed by comparison to an experiment conducted at a free stream flow of Mach 6. Good agreement is shown between the theoretical and experimental natural frequencies and mode shapes of the fluid–structure system. Stability analysis is performed using linear and nonlinear methods to plot stability, flutter and buckling zones on a free stream static pressure vs temperature differential plane.     

Buckling of a flush-mounted plate in simple shear flow

The buckling of an elastic plate with arbitrary shape flush-mounted on a rigid wall and deforming under the action of a uniform tangential load due to an overpassing simple shear flow is considered. Working under the auspices of the theory of elastic instability of plates governed by the linear von Kármán equation, an eigenvalue problem is formulated for the buckled state resulting in a fourth-order partial differential equation with position-dependent coefficients parameterized by the Poisson ratio. The governing equation also describes the deformation of a plate clamped around the edges on a vertical wall and buckling under the action of its own weight. Solutions are computed analytically for a circular plate by applying a Fourier series expansion to derive an infinite system of coupled ordinary differential equations and then implementing orthogonal collocation, and numerically for elliptical and rectangular plates by using a finite-element method. The eigenvalues of the resulting generalized algebraic eigenvalue problem are bifurcation points in the solution space, physically representing critical thresholds of the uniform tangential load above which the plate buckles and wrinkles due to the partially compressive developing stresses. The associated eigenfunctions representing possible modes of deformation are illustrated, and the effect of the Poisson ratio and plate shape is discussed.     

Nonlinear dynamic instability analysis of laminated composite thin plates subjected to periodic in-plane loads

In this paper, the dynamic instability of thin laminated composite plates subjected to harmonic in-plane loading is studied based on nonlinear analysis. The equations of motion of the plate are developed using von Karman-type of plate equation including geometric nonlinearity. The nonlinear large deflection plate equations of motion are solved by using Galerkin’s technique that leads to a system of nonlinear Mathieu-Hill equations. Dynamically unstable regions, and both stable- and unstable-solution amplitudes of the steady-state vibrations are obtained by applying the Bolotin’s method. The nonlinear dynamic stability characteristics of both antisymmetric and symmetric cross-ply laminates with different lamination schemes are examined. A detailed parametric study is conducted to examine and compare the effects of the orthotropy, magnitude of both tensile and compressive longitudinal loads, aspect ratios of the plate including length-to-width and length-to-thickness ratios, and in-plane transverse wave number on the parametric resonance particularly the steady-state vibrations amplitude. The present results show good agreement with that available in the literature.     

Energy Scaling of Compressed Elastic Films –Three-Dimensional Elasticity¶and Reduced Theories

We derive an optimal scaling law for the energy of thin elastic films under isotropic compression, starting from three-dimensional nonlinear elasticity. As a consequence we show that any deformation with optimal energy scaling must exhibit fine-scale oscillations along the boundary, which coarsen in the interior. This agrees with experimental observations of folds which refine as they approach the boundary. We show that both for three-dimensional elasticity and for the geometrically nonlinear Föppl-von Kármán plate theory the energy of a compressed film scales quadratically in the film thickness. This is intermediate between the linear scaling of membrane theories which describe film stretching, and the cubic scaling of bending theories which describe unstretched plates, and indicates that the regime we are probing is characterized by the interplay of stretching and bending energies. Blistering of compressed thin films has previously been analyzed using the Föppl-von Kármán theory of plates linearized in the in-plane displacements, or with the scalar eikonal functional where in-plane displacements are completely neglected. The predictions of the linearized plate theory agree with our result, but the scalar approximation yields a different scaling.     

Thermal buckling and post-buckling of pinned–fixed Euler–Bernoulli beams on an elastic foundation

In this article, both thermal buckling and post-buckling of pinned–fixed beams resting on an elastic foundation are investigated. Based on the accurate geometrically non-linear theory for Euler–Bernoulli beams, considering both linear and non-linear elastic foundation effects, governing equations for large static deformations of the beam subjected to uniform temperature rise are derived. Due to the large deformation of the beam, the constraint forces of elastic foundation in both longitudinal and transverse directions are taken into account. The boundary value problem for the non-linear ordinary differential equations is solved effectively by using the shooting method. Characteristic curves of critical buckling temperature versus elastic foundation stiffness parameter corresponding to the first, the second, and the third buckling mode shapes are plotted. From the numerical results it can be found that the buckling load-elastic foundation stiffness curves have no intersection when the value of linear foundation stiffness parameter is less than 3000, which is different from the behaviors of symmetrically supported (pinned–pinned and fixed–fixed) beams. As we expect that the non-linear foundation stiffness parameter has no sharp influence on the critical buckling temperature and it has a slight effect on the post-buckling temperature compared with the linear one.     

Local-buckling-induced elastic interaction between inclusions in a free-standing film

The local-buckling-induced elastic interaction between two circular inclusions in a free-standing film is reported using numerical simulation. The simulation relies on a continuum model based on the modified Föppl-von Kármán plate theory for a film with arbitrarily distributed eigenstrain and eigencurvature. It is shown that due to the overlapping of the nonlinear local buckling the elastic interaction between the two inclusions with the same eigencurvature is repulsive, while the interaction between them with the opposite eigencurvature is attractive. The interaction strength in both cases decays with their mutual distance. In addition, the inclusion with positive/negative eigenstrain above critical values can trigger an axisymmetric/non-axisymmetric buckling, respectively, and the buckling induced elastic interaction between the two inclusions with eigenstrain shows a nonmonotonic behavior.     

Nonlinear buckling of a spherical shell embedded in an elastic medium with imperfect interface

This work analyzes nonlinear buckling of a single spherical shell imperfectly bonded to an infinite elastic matrix under a compressive remote load. The inclusion is modeled using a nonlinear shell formulation and the matrix is treated as a linear elastic body. Imperfect bonding conditions are realized through a linear spring interface model. A variational method is used to derive the governing differential equations, which are cast into a tractable set of nonlinear algebraic equations using the Galerkin method. An incremental iterative technique based on the modified Newton–Raphson method is employed to find the critical load of the system. The accuracy and convergence properties of the proposed method are validated through finite element analysis. The study is relevant to the analysis of compressive failure of syntactic foams used in marine and aerospace applications. Results are specialized to glass particle-vinyl ester matrix syntactic foams to test the hypothesis as to whether microballoons’ buckling is a dominant failure mechanism in such composites under compression. Parametric studies are conducted to understand the effect of interfacial properties and inclusion wall thickness on the overall mechanical behavior of the composite. Comparisons between analytical findings and experimental results on compressive response of syntactic foams and isolated microballoons indicate that inclusion buckling is unlikely a determinant of compressive failure in vinyl ester-glass systems. In particular, the matrix is found to exert a beneficial stabilizing effect on the inclusions, which fail under brittle fracture before the onset of buckling.     

Non-linear studies of orthotropic shallow spherical shells on elastic foundation

Governing non-linear integro-differential equations for cylindrically orthotropic shallow spherical shells resting on linear Winkler-Pasternak elastic foundations, undergoing moderately large deformations are presented. Three problems, namely, non-linear static deflection response, non-linear dynamic deflection response and dynamic snap-through buckling of orthotropic shells have been investigated. The influences of material orthotropy, foundation parameters and shell-material damping on the deflection response are determined for the clamped and the simply- supported immovable edge conditions accurately. Orthotropy, foundation interaction and material damping play significant roles in improving the load carrying capacity of the shell structures.