Reliable electrophoretic mobilities free from Joule heating effects using CE

Ionic electrophoretic mobilities determined by means of CE experiments are sometimes different when compared to generally accepted values based on limiting ionic conductance measurements. While the effect of ionic strength on electrophoretic mobility has been long understood, the increase in the mobility that results from Joule heating (the resistive heating that occurs when a current passes through an electrolyte) has been largely overlooked. In this work, a simple method for obtaining reliable and reproducible values of electrophoretic mobility is described. The electrophoretic mobility is measured over a range of driving powers and the extrapolation to zero power dissipation is employed to eliminate the effect of Joule heating. These extrapolated values of electrophoretic mobility can then be used to calculate limiting ionic mobilities by making a correction for ionic strength; this somewhat complicated calculation is conveniently performed by using the freeware program PeakMaster 5. These straightforward procedures improve the agreement between experimentally determined and literature values of limiting ionic mobility by at least one order of magnitude. Using Tris-chromate BGE with a value of conductivity 0.34 S/m and ionic strength 59 mM at a modest dissipated power per unit length of 2.0 W/m, values of mobility for inorganic anions were increased by an average of 12.6% relative to their values free from the effects of Joule heating. These increases were accompanied by a reduction in mobilities due to the ionic strength effect, which was 11% for univalent and 28% for divalent inorganic ions compared to their limiting ionic mobilities. Additionally, it was possible to determine the limiting ionic mobility for a number of aromatic anions by using PeakMaster 5 to perform an ionic strength correction. A major significance of this work is in being able to use CE to obtain reliable and accurate values of electrophoretic mobilities with all its benefits, including understanding and interpretation of physicochemical phenomena and the ability to model and simulate such phenomena accurately.     

Capillary electrophoresis in aqueous-organic media. Ionic strength effects and limitations of the Hubbard-Onsager dielectric friction model

The mobilities of three aromatic sulfonates, ranging in charge from -1 to -3, were investigated by capillary electrophoresis using buffers containing 0 to 75% ethanol or 2-propanol. Absolute mobilities were determined by extrapolation of the effective mobilities to zero ionic strength according to the Pitts' equation. For all buffers studied, ions of higher charge experienced larger ionic strength effects. The resulting ionic strength-induced selectivity alterations were more dramatic when organic solvents were present in the media. Furthermore, for different organic modifier types and contents, the magnitude of the ionic strength effect was governed to a large extent by the 1/(eta epsilon 1/2) dependence in the electrophoretic effect of the Pitts' equation. Addition of ethanol or 2-propanol to the electrophoretic media resulted in changes in the absolute mobilities of the ions. These solvent-induced mobility changes are attributed to dielectric friction. As predicted by the Hubbard-Onsager model, dielectric friction increased with increasing organic content and with increasing analyte charge. As a result, dramatic changes in the relative absolute mobilities were observed, such as a reversal in migration order between sulfonates of -1 and -3 charge in 75% 2-propanol. Within the alcohols, the Hubbard-Onsager model was successful at predicting the relative mobility trends upon changing solvent. However, the relative trends observed between acetonitrile-water and alcohol-water media were not consistent with the model. This may be explained by the continuum nature of the model, whereby the different ion-solvent interactions characteristic to each solvent class are not taken into account.     

Parameters influencing separation and detection of anions by capillary electrophoresis

Electrolyte composition is critical in optimizing separation and detection of ions by capillary electrophoresis. The parameters which must be considered when designing an electrolyte system for capillary electrophoresis include electrophoretic mobility of electrolyte constituents and analytes, detection mode, and compatibility of electrolyte constituents with one another. An electrolyte system based on pyromellitic acid is well suited for use with indirect photometric detection, and provides excellent separations of anions. The ability to modify the electrophoretic mobility of pyromellitic acid as a function of ph provides flexibility in matching electrophoretic mobilities of analytes. Additionally, the use of alkyl amines as electroosmotic flow modifiers allows the rapid separation of anions by reversing the direction of electroosmotic flow in a fused-silica capillary. The optimization of a capillary electrophoresis electrolyte for anion analysis is also discussed in terms of pH, ionic strength and applied voltage. The effect of organic solvent on separation selectivity is also discussed.     

Determination of thermodynamic acidity constants and limiting ionic mobilities of weak electrolytes by capillary electrophoresis using a new free software AnglerFish

Thermodynamic acidity constants (acid or acid-base dissociation constants, sometimes called also as ionization constants) and limiting ionic mobilities (both of them at defined temperature, usually 25°C) are the fundamental physicochemical characteristics of a weak electrolyte, that is, weak acid or weak base or ampholyte. We introduce a novel method for determining the data of a weak electrolyte by the nonlinear regression of effective electrophoretic mobility versus buffer composition dependence when measured in a set of BGEs with various pH. To correct the experimental data for zero ionic strength we use the extended Debye-Hückel model and Onsager-Fuoss law with no simplifications. Contrary to contemporary approaches, the nonlinear regression is performed on limiting mobility data calculated by PeakMaster's correction engine, not on the raw experimental mobility data. Therefore, there is no requirement to perform all measurements at a constant ionic strength of the set of BGEs. We devised the computer program AnglerFish that performs the necessary calculations in a user-friendly fashion. All thermodynamic pKa values and limiting electrophoretic mobilities for arbitrarily charged substances having any number of ionic forms are calculated by one fit. The user input consists of the buffer composition of the set of BGEs and experimentally measured effective mobilities of the inspected weak electrolyte.     

Spectral deconvolution in electrophoretic NMR to investigate the migration of neutral molecules in electrolytes

Electrophoretic nuclear magnetic resonance (eNMR) is a powerful tool in studies of nonaqueous electrolytes, such as ionic liquids. It delivers electrophoretic mobilities of the ionic constituents and thus sheds light on ion correlations. In applications of liquid electrolytes, uncharged additives are often employed, detectable via ¹H NMR. Characterizing their mobility and coordination to charged entities is desirable; however, it is often hampered by small intensities and ¹H signals overlapping with major constituents of the electrolyte. In this work, we evaluate methods of phase analysis of overlapping resonances to yield electrophoretic mobilities even for minor constituents. We use phase-sensitive spectral deconvolution via a set of Lorentz distributions for the investigation of the migration behavior of additives in two different ionic liquid-based lithium salt electrolytes. For vinylene carbonate as an additive, no field-induced drift is observed; thus, its coordination to the Li⁺ ion does not induce a correlated drift with Li⁺. On the other hand, in a solvate ionic liquid with tetraglyme (G4) as an additive, a correlated migration of tetraglyme with lithium as a complex solvate cation is directly proven by eNMR. The phase evaluation procedure of superimposed resonances thus broadens the applicability of eNMR to application-relevant complex electrolyte mixtures containing neutral additives with superimposed resonances.     

Electrophoretic mobility of the polymer-like micelles of tetradecyldimethylamine oxide hemihydrochloride

Effects of the surfactant concentration C_d and the NaCl concentration C_s on the electrophoretic mobilities U of the well-characterized polymer-like micelles have been investigated by the electrophoretic light scattering, using tetradecyldimethylamine oxide hemihydrochloride (C14DMAO·1/2HCl). At the high ionic strength of 0.1 mol kg⁻¹ NaCl, the electrophoretic mobilities were independent of C_d (5 mM < C_d < 100 mM), despite the concentration-dependent micelle growth of the polymer-like micelles. This suggests that the electrophoretic mobility of the polymer-like micelle at high ionic strengths is independent of the contour length (i.e., the molecular weight), as found on linear polyelectrolytes. Somewhat surprisingly, the entanglements of the polymer-like micelles gave small effect on the electrophoretic mobilities in the examined range of the surfactant concentration above an overlap concentration. The mobilities of the polymer-like micelle decreased with √C_s in a single exponential manner in the range of C_s from 0.02 to 0.3 mol kg⁻¹. It is suggested that the cylinder model can be applied to the electrophoretic mobilities of the polymer-like micelles at high ionic strengths (i.e. a free-draining behavior), since the persistence length of the polymer-like micelle (20 nm) is much larger than the Debye length at high ionic strength.     

Relationship between swelling and the electrohydrodynamic properties of functionalized carboxymethyldextran macromolecules

The electrostatic, hydrodynamic, and swelling properties of a well-defined, functionalized carboxymethyldextran (CMD) polysaccharide are investigated in aqueous NaNO3 solution over a broad ionic strength range. The impact of the polycarboxylate charge and molar mass of the CMD macromolecules on their electrohydrodynamic features is thoroughly examined by combined protolytic titration, dynamic light scattering, and electrokinetic analyses. Electrophoretic mobility data obtained for sufficiently high electrolyte concentrations reveal a typical soft particle behavior. Upon decrease of the ionic strength, mobilities strongly increase in magnitude while significant electrostatic swelling takes place, as reflected in a decrease in the diffusion coefficients. CMD entities undergo conformational transitions from compact random coil at large ionic strengths to swollen coil and possibly a wormlike structure at lower NaNO3 concentrations. The magnitude of the variations in size and mobility with electrolyte concentration strongly depends on the overall charge of the CMD entity as well as on its molar mass. These factors control the stiffness of the constituent polymer chains and thus the degree of macromolecular permeability ("softness"). Using the soft-diffuse interface formalism previously developed for the electrohydrodynamics of charged permeable macromolecules, a quantitative analysis of the electrophoretic mobility data is presented. The measured values of the diffusion coefficient and space charge density Gamma degrees, as evaluated independently from the modeling of potentiometric titration curves, are taken into account in a self-consistent manner. It is found that large CMD entities of low charge densities are the most permeable to flow penetration with a limited heterogeneous electrostatic stiffening of the chains, whereas small CMD entities of larger Gamma degrees significantly expand upon lowering the ionic strength, giving rise to a strong anisotropy for the spatial distribution of polymer chain density.     

Dielectric friction as a mechanism for selectivity alteration in capillary electrophoresis using acetonitrile-water media

The mobilities of a series of aromatic carboxylates and sulfonates, ranging in charge from -1 to -4, were investigated as a function of acetonitrile concentration in the electrophoretic buffer. Absolute mobilities were determined by extrapolation of the effective mobilities to zero ionic strength according to the Pitts' equation. In general, anions of higher charge were more strongly influenced by ionic strength, with similarly charged anions experiencing ionic strength effects that were not significantly different at the 95% confidence level. Furthermore, the relative magnitudes of the Onsager slopes varied with acetonitrile content according to the z/(etaepsilon(1/2)) dependence in the electrophoretic effect of the Pitt's equation. Addition of acetonitrile to the electrophoretic media resulted in changes in the absolute mobilities of the anions. These acetonitrile-induced selectivity alterations were attributed to dielectric friction. As predicted by the Hubbard-Onsager model of dielectric friction, changes in sulfonate mobility were shown to correlate to changes in solvent viscosity (eta), dielectric constant (epsilon), and relaxation time (tau). The combined effects of ionic strength and dielectric friction caused analytes with higher charge-to-size ratios to be slowed to a greater extent upon addition of acetonitrile compared to those with lower charge-to-size. For example, at 75% acetonitrile and 20 mM ionic strength, a migration order reversal occurred between the triply and singly charged sulfonates.     

Investigation of the effect of ionic strength of Tris-acetate background electrolyte on electrophoretic mobilities of mono-, di-, and trivalent organic anions by capillary electrophoresis

The effect of ionic strength of the background electrolyte (BGE) composed of tris(hydroxymethyl)aminomethane (Tris) and acetic acid on the electrophoretic mobility of mono-, di- and trivalent anions of aliphatic and aromatic carboxylic and sulfonic acids was investigated by capillary zone electrophoresis (CZE). Actual ionic mobilities of the above anions were determined from their CZE separations in Tris-acetate BGEs of pH 8.1 to 8.2 in the 3 to 100 mM ionic strength interval at constant temperature (25 degrees C). It was found that the ionic strength dependence of experimentally determined actual ionic mobilities does not follow the course supposed by the classical Onsager theory. A steeper decrease of actual ionic mobilities with the increasing ionic strength of BGE and a higher estimated limiting mobility of the anions than that found in the literature could be attributed to the specific behavior of the Tris-acetate BGEs. Presumably, not only a single type of interaction of anionic analytes with BGE constituents but rather the combination of effects, such as ion association or complexation equilibria, seems to be responsible for the observed deviation of the concentration dependence of the actual ionic mobilities from the Onsager theory. Additionally, several methods for the determination of limiting ionic mobilities from CZE measured actual ionic mobilities were evaluated. It turned out that the determined limiting ionic mobilities significantly depend on the calculation procedure used.     

Influence of methanol as a buffer additive on the mobilities of organic cations in capillary electrophoresis

The mobilities of a series of aromatic ammonium ions, ranging in charge from +1 to + 3, were investigated by capillary electrophoresis using buffers consisting of 0-75% v/v methanol. This is an extension of our previous studies involving anion mobility in methanol-water media [1]. Absolute mobilities were determined by extrapolation of the effective mobilities to zero ionic strength according to the Pitts' equation. For all of the buffer compositions studied, the ionic strength effect increased with increasing cation charge, and varied as a function of solvent 1/eta epsilon (1/2) as predicted by the electrophoretic term within the Pitts' equation. In the presence of methanol, the ionic strength effects became more dramatic. The absolute mobilities of the cations were altered by the addition of methanol to the electrophoretic media. For example, at 75% MeOH, a migration order reversal was observed between the + 2 and + 3 ammonium ions. These solvent-induced selectivity changes are attributed to dielectric friction. As predicted by the Hubbard-Onsager dielectric friction model, dielectric friction increased with increasing methanol content and with increasing analyte charge. Further, the changes in cation mobility correlated to the changes in solvent relaxation time (tau), epsilon and eta. Although not predicted by the Hubbard-Onsager theory, the + 3 ammonium ion experienced more dielectric friction than the - 3 sulfonate and - 3 carboxylate investigated previously [1]. This apparent failure of the Hubbard-Onsager model results from its continuum nature, whereby ion-solvent interactions are not taken into account.     

Quantitative analysis of cation binding to the adenosine nucleotides using the variable ionic strength method: validation of the Debye-Hückel-Onsager theory of electrophoresis in the absence of counterion binding

The free solution mobilities of the adenosine nucleotides 5'-adenosine triphosphate (ATP), 5'-adenosine diphosphate (ADP), 5'-adenosine monophosphate (AMP), and 3'-5'-cyclic AMP (cAMP) have been measured in diethylmalonate buffers containing a wide variety of monovalent cations. The mobilities of all nucleotides increase gradually with the increase in intrinsic conductivity of the cation in the BGE. However, at a given conductivity, the mobilities observed for ATP, ADP, and AMP in BGEs containing alkali metal ions and other cations are lower than these observed in BGEs containing tetraalkylammonium ions. Since the mobility of cAMP is independent of the cation in the BGE, the results suggest that the relatively low mobilities observed for ATP, ADP, and AMP in BGEs containing cations other than a tetraalkylammonium ion are due to cation binding, reducing the effective net charge of the nucleotide and thereby reducing the observed mobility. To measure the binding quantitatively, the mobilities of the nucleotides were measured as a function of ionic strength. The mobilities of ATP, ADP, and AMP decrease nonlinearly with the square root of ionic strength (I(1/2)) in BGEs containing an alkali metal ion or Tris(+). By contrast, the mobilities decrease linearly with I(1/2) in BGEs containing a nonbinding quaternary ammonium ion, as expected from Debye-Hückel-Onsager (DHO) theory. The mobility of cAMP, a nonbinding analyte, decreases linearly with I(1/2), regardless of the cation in the BGE. Hence, a nonlinear decrease of the mobility of an analyte with I(1/2) appears to be a hallmark of counterion binding. The curved mobility profiles observed for ATP, ADP, and AMP in BGEs containing an alkali metal ion or Tris(+) were analyzed by nonlinear curve fitting, using difference mobility profiles to correct for the effect of the physical properties of BGE on the observed mobilities. The calculated apparent dissociation constants range from 22 to 344 mM, depending on the particular cation-nucleotide pair. Similar values have been obtained by other investigators, using different methods. Interestingly, Tris(+) and Li(+) bind to the adenosine nucleotides with approximately equal affinities, suggesting that positively charged Tris(+) buffer ions can compete with alkali metal ions in Tris-buffered solutions.     

Size-based characterization of nanometric cationic maghemite particles using capillary zone electrophoresis

Size-sorted maghemite (gamma-Fe(2)O(3)) particle populations of number mean solid diameters ranging from 6 to 10 nm were suspended and directly characterized in their stabilizing acidic, citrated or basic aqueous media using CZE coupled with UV detection. Analytical conditions were optimized in order to ensure reliable mobility measurements of these ferrofluids in their anionic and cationic forms. Particular interest has been paid to the investigation of the positively charged ferrofluids since cationic colloids have received little attention so far. A strategy for capillary wall modification was chosen in order to prevent particle adsorption while preserving high analytical performances. The influence of experimental conditions such as particle volume fraction, injection volume, electric field strength and electrolyte nature on electrophoretic profiles and measured electrophoretic mobilities was evaluated. A size-dependent electrophoretic mobility was demonstrated and discussed in terms of the ratio of the particle radius to Debye length with reference to existing models (Henry, etc.). Although these nanometric particle distributions lie in a very narrow size range, partial separation was obtained with selectivity varying as a function of electrolyte ionic strength.     

Influence of buffer composition on the capillary electrophoretic separation of carbon nanoparticles

Carbon nanoparticles obtained from the flame of an oil lamp were examined by means of capillary electrophoresis. The influence of buffer composition on the separation of the mixture of negatively charged carbon nanoparticles was studied by varying buffer selection, pH, and concentration. The electrophoretic pattern was affected by both the co- and counter-ion in the buffer solution, influencing selectivity and peak shape. The capillary electrophoretic separations at different pH revealed species with large electrophoretic mobilities under a wide range of pH. The mobility of selected species in the mixture of nanoparticles showed a strong dependence upon the solution ionic strength. The mobility of these nanoparticles as a function of ionic strength was compared to classical electrokinetic theory, suggesting that under the experimental conditions utilized, the species are small, highly charged particles with appreciable zeta potentials, even at low pH.     

Determination of the electrophoretic mobility of bacteria and their separation by capillary zone electrophoresis

Conditions for the determination of electrophoretic mobilities of bacteria by capillary electrophoresis (CE) were explored. Most precise values are obtained using fused silica capillaries of 1–3 m length (0.25 mm inner diameter), a background buffer with an ionic strength of 0.0015 mol/L and a pH value of 7–10 at a field strength of 120 V/cm. Capillary electrophoretic separation of three different bacteria populations on the basis of their mobility differences could be realized. Electrophoretic band widths of all bacteria populations investigated are relatively large compared to molecule bands. It finds its explanation in the different distribution of surface charge density to cross-sectional area of each single cell of a population.     

Capillary electrophoresis applied for the determination of acidity constants and limiting electrophoretic mobilities of ionizable herbicides including glyphosate and its metabolites and for their simultaneous separation

Thermodynamic acidity constants and limiting ionic mobilities were determined for polyprotic non-chromophore analytes using capillary electrophoresis with capacitively coupled contactless conductivity detection. It was not necessary to work with buffers of identical ionic strength as ionic strength effects on effective electrophoretic mobilities were corrected by modeling during data evaluation (software AnglerFish). The mobility data from capillary electrophoresis coupled to conductivity detection were determined in the pH range from 1.25 to 12.02 with a high resolution (36 pH steps). With this strategy, thermodynamic acidity constants and limiting ionic mobilities for various acidic herbicides were determined, sometimes for the first time. The model analytes included glyphosate, its metabolites, and its acetylated derivates (aminomethyl phosphonic acid, glyoxylic acid, sarcosine, glycine, N-acetyl glyphosate, N-acetyl aminomethyl phosphonic acid, hydroxymethyl phosphonic acid). The obtained data were used in simulations to optimize separations by capillary electrophoresis. Simulations correlated very well to experimental results. With the new method, the separation of glyphosate from interfering components like phosphate in beer samples was possible.     

Nitromethane as solvent in capillary electrophoresis

Nitromethane has several properties that make it an interesting solvent for capillary electrophoresis especially for lipophilic analytes that are not sufficiently soluble in water: freezing and boiling points are suitable for laboratory conditions, low viscosity leads to favourable electrophoretic mobilities, or an intermediate dielectric constant enables dissolution of electrolytes. In the present work we investigate the change of electrophoretically relevant analyte properties - mobilities and pKa values - in nitromethane in dependence on the most important experimental conditions determined by the background electrolyte: the ionic strength, I, and the pH. It was found that the mobility decreases with increasing ionic strength (by, e.g. up to 30% from I = 0 to 50 mmol/L) according to theory. An appropriate pH scale is established by the aid of applying different concentration ratios of a buffer acid with known pKa and its conjugate base. The mobility of the anionic analytes (from weak neutral acids) depends on the pH with the typical sigmoidal curve in accordance with theory. The pKa of neutral acids derived from these curves is shifted by as much as 14 pK units in nitromethane compared to water. Both findings confirm the agreement of the electrophoretic behaviour of the analytes with theories of electrolyte solutions. Separation of several neutral analytes was demonstrated upon formation of charged complexes due to heteroconjugation with chloride as ionic constituent of the background electrolyte.     

Computer simulation of the enantioselective separation of weak bases in an online capillary electrophoresis based microanalysis configuration comprising sulfated cyclodextrin as selector

Computer simulation was utilized to characterize the electrophoretic processes occurring after reactant mixing in an online assay format used for monitoring the enantioselective N‐demethylation of ketamine to norketamine in the presence of highly sulfated γ‐cyclodextrin (HS‐γ‐CD). The incubated reaction mixture (at pH 7.4 and without chiral selector) is bracketed by a low pH BGE containing 2% HS‐γ‐CD as chiral selector, thereby forming a discontinuous buffer system. Upon power application, simulation provides insight into the formation of moving boundaries and new zones together with the prediction of the behavior of ketamine and norketamine enantiomers. The analytes first migrate cationically in a zone electrophoretic manner until they come in contact with HS‐γ‐CD upon which enantioseparation is initiated. Complexation has a focusing effect and the electrophoretic transport becomes reversed, that is, toward the anode. Simulation revealed that the initial conditions for the chiral separation, including buffer components concentrations, pH, and ionic strength, are different than those in the BGE. As a consequence thereof, the experimentally determined complexation parameters for the BGE were unable to correctly describe the migration behavior of the analytes in this column section. An increase in the input binding constants by a factor of two to four, as a result of the decreased ionic strength, resulted in simulation data that agreed with experimental findings.     

Determination of the electrophoretic mobility of bacteria and their separation by capillary zone electrophoresis

Conditions for the determination of electrophoretic mobilities of bacteria by capillary electrophoresis (CE) were explored. Most precise values are obtained using fused silica capillaries of 1–3 m length (0.25 mm inner diameter), a background buffer with an ionic strength of 0.0015 mol/L and a pH value of 7–10 at a field strength of 120 V/cm. Capillary electrophoretic separation of three different bacteria populations on the basis of their mobility differences could be realized. Electrophoretic band widths of all bacteria populations investigated are relatively large compared to molecule bands. It finds its explanation in the different distribution of surface charge density to cross-sectional area of each single cell of a population. Received: 30 January 1997 / Revised: 15 May 1997 / Accepted: 22 May 1997     

Internal mobilities and diffusion in an ionic liquid mixture

The internal mobility gives the rate at which one ionic species moves relative to the other species present in an ionic mixture, it mirrors the differential strength of the interactions between different ionic species. In this work we examine the dependence of the internal mobilities of the Li(+) and K(+) ions on the composition in molten mixtures of LiF and KF. We compare them to the behaviour of the individual diffusion coefficients and the self-exchange velocities, which measure the rate at which an ion separates from its nearest-neighbour coordination shell. The examination is made using molecular dynamics simulations with polarizable, first-principles parameterised interaction potentials which are shown to reproduce the limited available experimental data on the transport properties of these mixtures extremely well. The results confirm that the composition-dependence of the internal mobilities in LiF/KF follows the unusual type-II behaviour, which is not reflected in that of the diffusion coefficients or the self-exchange velocities.     

Physicochemical characterization of phosphinic pseudopeptides by capillary zone electrophoresis in highly acidic background electrolytes

Phosphinic pseudopeptides (i.e., peptide isosteres with one peptide bond replaced by a phosphinic acid moiety) were analyzed and physicochemically characterized by capillary zone electrophoresis in the pH range of 1.1-3.2, employing phosphoric, phosphinic, oxalic and dichloroacetic acids as background electrolyte (BGE) constituents. The acid dissociation constant (pK(a)) of phosphinate group in phosphinic pseudopeptides and ionic mobilities of these analytes were determined from the pH dependence of their effective electrophoretic mobilities corrected to standard temperature and constant ionic strength of the BGEs. It was shown that these corrections are necessary whenever precise mobility data at very low pH are to be determined. Additionally, it was found that the ionic mobilities of the phosphinic pseudopeptides and pK(a) of their phosphinate group are affected by the BGE constituent used. The variability of migration behavior of the pseudopeptides can be attributed to their ion-pairing formation with the BGE components.