Suitability of ionic liquids as mobile‐phase additives in HPLC with fluorescence and UV detection for the determination of heterocyclic aromatic amines

The effects of several ionic liquids (ILs) as mobile‐phase additives in HPLC with fluorescence and UV–Vis detection for the determination of six heterocyclic aromatic amines were evaluated using two different C₁₈ stationary phases with moderate silanol activity. The studied ILs were 1‐butyl‐3‐methylimidazolium tetrafluoroborate, 1‐hexyl‐3‐methylimidazolium tetrafluoroborate and 1‐methyl‐3‐octylimidazolium tetrafluoroborate. The optical behaviour of heterocyclic aromatic amines in presence of ILs was studied and the silanol‐suppressing potency of ILs was evaluated for the two stationary phases studied. Several chromatographic parameters were evaluated in the presence or absence of ILs, or using triethylamine, the most common mobile‐phase additive. The best results were achieved using 1 mM 1‐butyl‐3‐methylimidazolium tetrafluoroborate as mobile‐phase additive and NovaPak^® column. In these conditions and with 18% of ACN in the mobile phase, analytical performance of the chromatographic methods using fluorescence and UV–Vis were evaluated, obtaining good precision in all cases (RSD lower than 6.6%) and low LOD (0.001–0.147 μg/mL with UV–Vis and 0.001–0.006 ng/mL with fluorescence detection).     

Optimization and characterization of liposome formulation by mixture design

This study presents the application of the mixture design technique to develop an optimal liposome formulation by using the different lipids in type and percentage (DOPC, POPC and DPPC) in liposome composition. Ten lipid mixtures were generated by the simplex-centroid design technique and liposomes were prepared by the extrusion method. Liposomes were characterized with respect to size, phase transition temperature, ζ-potential, lamellarity, fluidity and efficiency in loading calcein. The results were then applied to estimate the coefficients of mixture design model and to find the optimal lipid composition with improved entrapment efficiency, size, transition temperature, fluidity and ζ-potential of liposomes. The response optimization of experiments was the liposome formulation with DOPC: 46%, POPC: 12% and DPPC: 42%. The optimal liposome formulation had an average diameter of 127.5 nm, a phase-transition temperature of 11.43 °C, a ζ-potential of -7.24 mV, fluidity (1/P)(TMA-DPH)((?)) value of 2.87 and an encapsulation efficiency of 20.24%. The experimental results of characterization of optimal liposome formulation were in good agreement with those predicted by the mixture design technique.     

Synthesis of Low‐Viscosity Ionic Liquids for Application in Dye‐Sensitized Solar Cells

Two types of ionic liquids (ILs), 1‐(3‐hexenyl)‐3‐methyl imidazolium iodide and 1‐(3‐butenyl)‐3‐methyl imidazolium iodide, are synthesized by introducing an unsaturated bond into the side alkyl chain of the imidazolium cation. These new ionic liquids exhibit high thermal stability and low viscosity (104 cP and 80 cP, respectively). The molecular dynamics simulation shows that the double bond introduced in the alkane chain greatly changes the molecular system space arrangement and diminishes the packing efficiency, leading to low viscosity. The low viscosity of the synthesized ionic liquids would enhance the diffusion of redox couples. This enhancement is detected by fabricating dye‐sensitized solar cells (DSSCs) with electrolytes containing the two ILs and I₂. The highest efficiency of DSSCs is 6.85 % for 1‐(3‐hexenyl)‐3‐methyl imidazolium iodide and 5.93 % for 1‐(3‐butenyl)‐3‐methyl imidazolium iodide electrolyte, which is much higher than that of 5.17 % with the counterpart 1‐hexyl‐3‐methyl imidazolium iodide electrolyte.     

Catalytic polymerization of phenylacetylene with dimeric [Rh(OMe)(cod)]2 complex in ionic liquids

Dimeric rhodium(I) complex [Rh(OMe)(cod)]₂ was found to be an active catalyst of phenylacetylene polymerization to poly(phenylacetylene) (PPA) in ionic liquids containing imidazolium or pyridinium cations. The highest yield of PPA (92%) was obtained in 1‐butyl‐4‐methylpyridinium tetrafluoroborate as reaction medium. The yield of PPA in imidazolium ionic liquids containing BF₄^? or PF₆^? anions increased to 83–99% when Et₃N or cycloocta‐1,5‐diene were added as co‐catalysts. In 1‐methyl‐3‐octylimidazolium chloride (MOI · Cl) polymerization rate was much lower than in other ionic liquids, although the highest M_w (72 400) was obtained. Spectroscopic studies confirmed that [Rh(OMe)(cod)]₂ reacted with MOI · Cl forming new carbene Rh(I) complex, which can participate in the polymerization process. Copyright © 2006 John Wiley & Sons, Ltd.     

Imidazolium 2‐Substituted 4,5‐Dicyanoimidazolate Ionic Liquids: Synthesis,Crystal Structures and Structure–Thermal Property Relationships

Thirty six novel ionic liquids (ILs) with 1‐butyl‐3‐methylimidazolium and 3‐methyl‐1‐octylimidazolium cations paired with 2‐substitited 4,5‐dicyanoimidazolate anions (substituent at C2=chloro, bromo, methoxy, vinyl, amino, methyl, ethyl, propyl, isopropyl, butyl, pentyl, hexyl, heptyl, octyl, nonyl, decyl, undecyl and phenyl) have been synthesized and characterized by using differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and single‐crystal X‐ray crystallography. The effects of cation and anion type and structure on the thermal properties of the resulting ionic liquids, including several room temperature ionic liquids (RTILs) are examined and discussed. ILs exhibited large liquid and crystallization ranges and formed glasses on cooling with glass transition temperatures in the range of ?22 to ?68 °C. The effects of alkyl substituents of the imidazolate anion reflected the crystallization, melting points and thermal decomposition of the ILs. The Coulombic packing force, van der Waals forces and size of the anions can be considered for altering the thermal transitions. Three crystal structures of the ILs were determined and the effects of changes to the cations and anions on the packing of the structure were investigated.     

Micro/macrotribological properties of several nano‐scale ionic liquid films on modified silicon wafers

Three kinds of alkylimidazolium base room temperature ionic liquids (RTILs) were synthesized and their nano‐scale lubricant films were prepared on modified silicon wafers by dip‐coating method. The thicknesses of these films were measured and their relationship between thickness and solution concentration was obtained. Their surface morphologies were observed and contact angles of water on these films were determined. The adhesions and friction coefficients of these films were detected by contact mode AFM. As comparison, their macrotribological properties were evaluated on a UMT‐2MT tribo‐tester. It was found that, in microscale, 1‐hexyl‐3‐methyl‐imidazolium hexafluorophosphate performed the best tribological properties, while in macroscale, its tribological properties were similar with that of 1‐hexyl‐3‐methyl‐imidazolium tetrafluoroborate and better than that of 1‐hexyl‐3‐methyl‐imidazolium adipate. Copyright © 2009 John Wiley & Sons, Ltd.     

Cationic polymerization of vinyl ethers with alkyl or ionic side groups in ionic liquids

Controlled cationic polymerization of isobutyl vinyl ether was demonstrated to proceed in an ionic liquid (IL), 1‐butyl‐3‐octylimidazolium bis(trifluoromethanesulfonyl)imide, using a 1‐(isobutoxy)ethyl acetate/TiCl₄ initiating system, ethyl acetate as an added base, and 2,6‐di‐tert‐butylpyridine as a proton trap reagent. Judicious choices of metal halide catalysts, counteranions of ILs, and additives were essential for controlling the polymerization. The polymerization proceeded much faster in the IL than in CH₂Cl₂, indicating an increased population of ionic active species in the IL due to the high polarity. Polymers with a relatively narrow molecular weight distribution were obtained in the IL with a bis(trifluoromethanesulfonyl)imide ( ) anion even in the absence of an added base, which suggested possible interactions of the counteranion of the IL with the growing carbocations. Moreover, the direct cationic polymerization of a vinyl ether with pendant imidazolium salts, 1‐(2‐vinyloxyethyl)‐3‐methylimidazolium bis(trifluoromethanesulfonyl)imide, proceeded in a homogeneous state in 1‐methyl‐3‐octylimidazolium bis(trifluoromethanesulfonyl)imide. The solubilities of the obtained polymers were readily tuned by counteranion exchange. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1774–1784     

Polarity Behaviour and Specific Interactions of Imidazolium‐Based Ionic Liquids in Ethylene Glycol

The molecular interactions of the ionic liquids (ILs) 1‐butyl‐3‐methylimidazolium tetrafluoroborate [C₄mim][BF₄], 3‐methyl‐1‐octylimidazolium tetrafluoroborate [C₈mim][BF₄] and 1‐butyl‐3‐methylimidazolium octylsulfate [C₄mim][C₈OSO₃] are investigated in ethylene glycol (EG) over the whole mole fraction range using fluorescence (steady‐state and time‐resolved), Fourier transform infrared and nuclear magnetic resonance (NMR) spectroscopy. The cybotactic region surrounding the pyrene fluorescent probe exhibits peculiar characteristics for different ILs in the EG‐rich region. The extent of solute–solvent interactions is assessed by determining the deviations of experimentally observed vibronic band intensity ratios of peak 1 to peak 3 of pyrene fluorescence (I₁/I₃) from a composite I₁/I₃ value obtained using a preferential solvation model. A distinct vibrational frequency shift for various stretching modes of EG (O? H) or ILs (C? H of ring protons, B? F and S?O of anions) indicates specific interactional preferences of EG toward the IL protons/anion. Splitting of the O? H vibration band of EG at 3000–3700 cm^?1 into three separate bands, and analysis of the changes in location and area of these bands as a function of concentration enable precise determination of the effect of ILs on hydrogen bridges of EG. NMR chemical shifts and their deviations from ideality show multiple hydrogen‐bonding interactions of varying strengths between unlike molecules in the mixtures. A comparison of spectroscopic results with thermodynamic properties shows that the mixing microscopic behaviour of the investigated systems is completely different from the macroscopic behaviour, which is primarily governed by the difference in shape, size and nature of the molecules.     

Effects of silver nanoparticles on the fluidity of bilayer in phospholipid liposome

This paper describes the formation and characterization of liposome entrapping the silver nanoparticles in bilayer. Silver nanoparticles were entrapped in the bilayer of dipalmitoylphosphatidylcholine (DPPC) liposome, named as silver-loaded liposome. Specifically, above the gel to liquid-crystalline phase transition temperature of this lipid (i.e., 41 degrees C), it was observed that membrane fluidities of silver-loaded liposomes were increased, and fluorescence anisotropy values were reduced from 0.114 to 0.097. This might be due to the structural modifications and interactions between DPPC molecules and silver nanoparticles within the bilayer. It was also confirmed that silver nanoparticles were entrapped in hydrophobic region of lipid bilayer with transmission electron microscopy (TEM) and electron energy loss spectroscopy (EELS) measurements.     

Atom transfer radical polymerization of styrenic ionic liquid monomers and carbon dioxide absorption of the polymerized ionic liquids

Polymeric forms of ionic liquids have many potential applications because of their high thermal stability and ionic nature. Two ionic liquid monomers, 1‐(4‐vinylbenzyl)‐3‐butyl imidazolium tetrafluoroborate (VBIT) and 1‐(4‐vinylbenzyl)‐3‐ butyl imidazolium hexafluorophosphate (VBIH), were synthesized through the quaternization of N‐butylimidazole with 4‐vinylbenzylchloride and a subsequent anion‐ exchange reaction with sodium tetrafluoroborate or potassium hexafluorophosphate. Copper‐mediated atom transfer radical polymerization was used to polymerize VBIT and VBIH. The effects of various initiator/catalyst systems, monomer concentrations, solvent polarities, and reaction temperatures on the polymerization were examined. The polymerization was well controlled and exhibited living characteristics when CuBr/1,1,4,7,10,10‐hexamethyltriethylenetetramine or CuBr/2,2′‐bipyridine was used as the catalyst and ethyl 2‐bromoisobutyrate was used as the initiator. Characterizations by thermogravimetric analysis, differential scanning calorimetry, and X‐ray diffraction showed that the resulting VBIT polymer, poly[1‐(4‐vinylbenzyl)‐3‐butyl imidazolium tetrafluoroborate] (PVBIT), was amorphous and had excellent thermal stability, with a glass‐transition temperature of 84 °C. The polymerized ionic liquids could absorb CO₂ as ionic liquids: PVBIT absorbed 0.30% (w/w) CO₂ at room temperature and 0.78 atm. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1432–1443, 2005     

混合离子液体对聚甲基丙烯酸甲酯分子链缠结及松弛行为的影响

首先通过两步法合成了具有双咪唑环阳离子结构的离子液体(DIL),并将其与单咪唑环离子液体(MIL)进行混合以调控黏度变化,混合离子液体(ILs)的黏度符合对数混合规则且随温度变化呈现Arrhenius型流体行为.进一步通过动态流变、示差扫描量热(DSC)、电化学测试等方法研究了混合离子液体中DIL比例对聚甲基丙烯酸甲酯(PMMA)链缠结和松弛行为的影响,并讨论了PMMA/ILs体系热稳定性、玻璃化转变及离子电导率等的变化.结果表明,DIL独特的双咪唑环结构可与PMMA分子形成更多相互作用位点,从而导致凝聚缠结的形成,很大程度上限制了PMMA分子链的运动和松弛.随DIL含量增加,PMMA/ILs体系的松弛时间、热分解温度、玻璃化转变温度等参数均呈增大趋势,但其离子电导率有所损失,这与DIL较大的分子尺寸和运动能力有关.     

A rapid and simple HPLC method for the determination of curcumin in rat plasma: assay development,validation and application to a pharmacokinetic study of curcumin liposome

This paper describes a sensitive, specific and rapid high‐performance liquid chromatography (HPLC) method for the determination of curcumin in rat plasma. After a simple step of protein precipitation in 96‐well format using acetonitrile containing the internal standard (IS), emodin, plasma samples were analyzed by reverse‐phase HPLC. Curcumin and the IS emodin were separated on a Diamonsil C₁₈ analytical column (4.6 × 100 mm, 5 µm) using acetonitrile–5% acetic acid (75:25, v/v) as mobile phase at a flow rate of 1.0 mL/min. The method was sensitive with a lower limit of quantitation of 1 ng/mL, with good linearity (r² ≥ 0.999) over the linear range 1–500 ng/mL. All the validation data, such as accuracy and precision, were within the required limits. A run time of 3.0 min for each sample made high‐throughput bioanalysis possible. The assay method was successfully applied to the study of the pharmacokinetics of curcumin liposome in rats. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis and characterization of anhydrous conducting polyimide/ionic liquid complex membranes via a new route for high‐temperature fuel cells

The paper deals with the synthesis and characterization of a new series of anhydrous conducting acid‐doped complex membranes based on polyimide (PI) and ionic liquid (IL) for high‐temperature fuel cells via a new route. For this purpose, three imidazolium‐based ILs (RIm⁺BF₄^?) with different alkyl chain lengths (R=methyl, ethyl, and butyl) are added into polyamic acid (PAA) intermediate prepared from the reaction of benzophenonetetracarboxylic dianhydride and diaminodiphenylsulfone in different –COOH/imidazolium molar ratios (n = 0.5, 1, and 2). Then, the thermally imidized complex membrane was doped with H₂SO₄. The conductivities of acid‐doped PI/IL complex membranes prepared by taking n of 1 are found to be in the range of 10^?4?10^?5 S cm^?1 at 180°C, whereas the acid‐free PI/IL complex membranes show the conductivity at around 10^?9?10^?10 S cm^?1. Thermogravimetric analysis results reveal that the acid‐doped PI/IL complex membranes are thermally stable up to 250°C. Dynamic mechanical analysis results of the acid‐doped ionically interacted complex membrane show that the mechanical strengths of the PI/IL complex membranes including 1‐methyl imidazolium tetrafluoroborate (MeIm‐BF₄) and 1‐ethyl 3‐methyl imidazolium tetrafluoroborate (EtIm‐BF₄) are comparable with those of pristine PI until 200°C. Furthermore, it can be clearly emphasized that the ionic interaction between carboxylic acid groups of PAA's and IL's cations offers a positive role in long‐term conductivity stability by preventing the IL migration at high temperatures. On the other hand, preliminary methanol permeability tests of the acid‐doped membranes show that they can also be considered as an alternative for direct methanol fuel cells. Copyright © 2011 John Wiley & Sons, Ltd.     

Effects of cationic head groups of ionic liquid on micellization in aqueous solution of PEO-PPO-PEO triblock copolymer

The interaction of ionic liquids (ILs) with non-ionic triblock copolymer, Pluronic® P123 in aqueous solutions has been investigated using DLS, surface tension, and viscosity measurements. The addition of ILs increased the Critical Micelle Concentration (CMC) of P123, which appears to be logistic. As the added IL enhances the solubility of PPO moiety (and PEO), which makes them to behave like a more hydrophilic block copolymer that would be micellized at high copolymer concentration. The DLS data is in good agreement to the results observed from surface tension measurements. Viscosity results show the propensity in micellar size reduction upon addition of ILs, and hence, intrinsic viscosity decreases as compared to pure P123 aqueous solution. The results are studied and discussed as a function of cationic head groups of N-octyl-pyridinium/imidazolium chloride based ILs.     

Properties of Apolar Solutes in Alkyl Imidazolium‐Based Ionic Liquids: The Importance of Local Interactions

The solvation and the dynamic properties of apolar model solutes in alkyl imidazolium‐based ionic liquids (IL) are studied by using all‐atom molecular dynamics simulations. In regards to specific IL effects, we focused on the often used 1‐ethyl‐3‐methyl imidazolium cation in combination with the anions tetrafluoroborate, acetate, and bis(trifluoromethanesulfonyl)imide. Our findings reveal that the size of the anion crucially influences the accumulation behavior of the cations, which results in modified IL solvation properties. Deviations between the different alkyl imidazolium‐based IL combinations can be also observed with regard to the results for the radial distribution functions, the number of surrounding molecules, and the molecular orientation. The analysis of the van Hove function further shows pronounced differences in the dynamic behavior of the solutes. The simulations verify that the solute mobilities are mainly influenced by the composition of the local solvent shell and the properties of the underlying Lennard–Jones interactions. Additional simulations with regard to modified short‐range dispersion energies for alkyl imidazolium‐based ILs validate our conclusions.     

Microwave‐Assisted Functionalization of Carbon Nanostructures in Ionic Liquids

The effect of microwave (MW) irradiation and ionic liquids (IL) on the cycloaddition of azomethine ylides to [60]fullerene has been investigated by screening the reaction protocol with regard to the IL medium composition, the applied MW power, and the simultaneous cooling of the system. [60]Fullerene conversion up to 98 % is achieved in 2–10 min, by using a 1:3 mixture of the IL 1‐methyl‐3‐n‐octyl imidazolium tetrafluoroborate ([omim]BF₄) and o‐dichlorobenzene, and an applied power as low as 12 W. The mono‐ versus poly‐addition selectivity to [60]fullerene can be tuned as a function of fullerene concentration. The reaction scope includes aliphatic, aromatic, and fluorous‐tagged (FT) derivatives. MW irradiation of IL‐structured bucky gels is instrumental for the functionalization of single‐walled carbon nanotubes (SWNTs), yielding group coverages of up to one functional group per 60 carbon atoms of the SWNT network. An improved performance is obtained in low viscosity bucky gels, in the order [bmim]BF₄> [omim]BF₄> [hvim]TF₂N (bmim=1‐methyl‐3‐n‐butyl imidazolium; hvim=1‐vinyl‐3‐n‐hexadecyl imidazolium). With this protocol, the introduction of fluorous‐tagged pyrrolidine moieties onto the SWNT surface (1/108 functional coverage) yields novel FT‐CNS (carbon nanostructures) with high affinity for fluorinated phases.     

Stabilized liposomes with phospholipid polymers and their interactions with blood cells

To stabilize a phospholipid liposome, addition of various water-soluble polymers into a liposomal aqueous suspension was investigated. The water-soluble polymers were poly(ethylene oxide) (PEO), poly(N-vinyl pyrrolidone) (PVPy) and poly[2-methacryloyloxyethyl phosphorylcholine(MPC)], and poly[MPC-co-n-butyl methacrylate(BMA)]. The gel–liquid crystal transition temperature (T_c) of the diparmitoylphosphatidylcholine (DPPC) liposome was not changed by addition of these polymers significantly. However, membrane fluidity of DPPC liposome treated with water-soluble polymers, which was measured with fluorescence probe, depended on the chemical structure of the water-soluble polymers. In the case of PEO and PVPy, the temperature dependence of membrane fluidity was the same as that of the original DPPC liposome, on the other hand, poly(MPC) and poly(MPC-co-BMA) induced a rise in the temperature where an increase in the membrane fluidity was observed. The release of carboxy fluorescein from the DPPC liposome was suppressed by the addition of the MPC polymers. The liposomes in the MPC polymer solution were stable compared with those in water when plasma was added into the suspension. Interactions with stabilized liposome with blood cells such as platelets and erythrocytes were evaluated. Activation of platelets in contact with liposome covered with poly(MPC) or poly(MPC-co-BMA) was less than PEO-stabilized liposome. On the other hand, no hemolysis of erythrocytes was observed when every polymer-treated liposome was added in the suspension of erythrocytes. Based on these results, the MPC polymers could interact with the liposome surface, adsorb on the liposomes and stabilize them, and had no adverse effect to the blood cells even when they were in a physiological environment.     

Study of Imidazolium Ionic Liquids:Temperature-dependent Fluorescence and Molecular Dynamics Simulation

The steady-state fluorescence spectra and molecular dynamics simulations were explored to investigate the temperature dependent organization in some imidazolium ionic liquids:1-butyl-3-methylimidazolium hexafluo-rophosphate([bmim][PF6]),1-ethyl-3-methylimidazolium ethylsulfate([emim][EtSO4]) and 1-butyl-3-methylimida-zolium tetrafluoroborate([bmim][BF4]).The pure room temperature ionic liquids(ILs) exhibit a large red shift at more than an excitation wavelength of around 340 nm,which demonstrates the hetero...     

硝基苯与离子液体的相互作用对硝基苯电还原传递系数的影响

应用紫外光谱研究了离子液体和硝基苯的相互作用, 硝基苯的紫外光谱受离子液体的影响, 硝基的吸收峰红移, 末端吸收消失. 用循环伏安法研究硝基苯电还原过程中第2个电子转移的传递系数(α)随外界条件变化所呈现复杂的变化规律. 硝基苯和水的介电性质、硝基苯和水与离子液体的相互作用对α产生复杂影响. 硝基苯浓度增加使α减小, 离子液体的咪唑侧链增长也使α减小. 相同硝基苯浓度时, 水的浓度较低时, α随水的浓度增加变小; 水的浓度较高时, α随水的浓度增加稍微变大. 温度升高α值增大.     

Simultaneous determination of fangchinoline and tetrandrine in Stephania tetrandra S. Moore by using 1-alkyl-3-methylimidazolium-based ionic liquids as the RP-HPLC mobile phase additives

A reversed phase high performance liquid chromatography (RP-HPLC) method for simultaneous determination of fangchinoline (FAN) and tetrandrine (TET) in Stephania tetrandra S. Moore was established by using 1-hexyl-3-methylimidazolium tetrafluoroborate as the mobile phase additives in this paper. Four types of 1-alkyl-3-methylimidazolium-based ionic liquids (ILs) were used as additives of the mobile phase to separate FAN and TET by RP-HPLC. The effects of the length of the alkyl group on the imidazolium ring and its counterion, the concentrations of IL and the pH of the mobile phase, which influenced the chromatographic behaviors of FAN and TET, were investigated in detail. The linearity, sensitivity, accuracy and repeatability of the proposed method were also investigated. The probable mechanism of the separation with ILs as the mobile phase additives was explored and discussed.