An NMR investigation on the phase structure and molecular mobility of the novel exfoliated polyethylene/palygorskite nanocomposites

Novel exfoliated polyethylene (PE)/palygorskite nanocomposites prepared by in situ polymerization are characterized by solid‐state nuclear magnetic resonance (NMR). The phase structure and molecular mobility are investigated by a combination of proton and carbon NMR. The results showed that incorporation of small amounts of palygorskite had great influence on the phase structure and molecular mobility. The incorporated palygorskite hindered the crystallization process and introduced motion‐hindered chains in the NMR crystalline and amorphous phase. ¹³C cross‐polarization and magic‐angle spinning NMR revealed two orthorhombic crystalline phase with different line‐width. The chain mobility of orthorhombic crystalline phase with broad resonance line is obviously hindered compared with the phase with narrow resonance line when the filler is introduced. Additionally, the results of pulsed field gradient NMR technique show those the tortuosities in the nanocomposites are much higher than that in the bulk PE. The self‐diffusion process of probe molecules is also influenced by the palygorksite load. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1363–1371, 2010     

NMR study of the nanomorphology in thin films of polymer blends used in organic PV devices: MDMO‐PPV/PCBM

The disclosure of the nanomorphology of thin films in organic solar cells, prepared from blends of conjugated polymers and PCBM, is of key importance for a better understanding of the occurring photovoltaic (PV) mechanisms. Hereto solid‐state NMR relaxometry has been evaluated as a complementary technique to traditional microscopic techniques like atomic force microscopy and transmission electron microscopy. It is demonstrated that proton wide‐line solid‐state NMR relaxometry is a useful and innovative tool to study the phase morphology of blends used in semi‐conducting polymer based PV devices. Attention is focused on the influence of the blend composition and casting conditions on the resulting phase morphology. Two different casting techniques, i.e. spincoating and Doctor Blading, were compared. To demonstrate the applicability of NMR relaxometry in this field, MDMO‐PPV/PCBM blends where used, since these are known for their significant phase separation behavior in combination with toluene as solvent. In films prepared from blends in toluene with a PCBM content ≥70 wt %, a fraction of the PCBM is phase separated into crystalline domains, whereas the remaining part remains homogeneously mixed with the MDMO‐PPV. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 138–145, 2008     

Improvement in semipermeable membrane performance of wholly aromatic polyamide through an additive processing strategy

A new concept for the method to provide semipermeability in ultrathin and single‐component wholly aromatic polyamide membranes has been developed for the first time. It was found that water molecules could permeate through the membrane prepared not from polyamides containing flexible ether, bulky binaphthyl, or fluorene rigid units, but one with carboxylic acid groups under a reverse osmosis mode. However, the enhancement of water transport properties by introducing the hydrophilic group of polyamide was not substantial. Therefore, polyamide membranes were prepared from the solution containing aqueous additives in order to weaken hydrogen bonds between polymer chains and thereby to suppress the aggregation of the polymer chains. As a result, water flux was dramatically improved with slightly improved NaCl rejection. Our analyses based on attenuated total reflectance Fourier transform infrared spectroscopy and solid‐state carbon polarization and magic angle spinning nuclear magnetic resonance (¹³C CPMAS NMR) spectroscopy confirmed that the aggregation of polymer chains due to the hydrogen bonds among the amide linkages was suppressed by the co‐ordination of the aqueous additives to the amide linkage. The state of water in the membranes analyzed by differential scanning calorimetry also supported the formation of pores. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1275–1281     

Formation of hydrogen bonding in ionized poly(N‐isopropylacrylamide) gels by continuous water exchange

The effects of continuous water exchange on the swelling behavior of poly(N‐isopropylacrylamide‐co‐sodium acrylate) gel were studied. The diameter of gels and the Na⁺ concentration in the solvent were measured at several constant intervals after the solvent (the distilled deionized water) was exchanged. The diameter decreased at room temperature as the solvent was exchanged with water, and it continued to decrease even after more than about 97% of the initial Na⁺ diffused into the water. Thus, the final swelling ratio of the gel was only slightly larger than that of the neutral poly(N‐isopropylacrylamide) gel. To reveal the structural change in molecular level, solid‐state ¹³C cross‐polarization/magic‐angle spinning, solid‐state ¹H combined rotation and multiple‐pulse spectroscopy, and swollen‐state ¹³C dipolar decoupled/magic‐angle spinning NMR experiments were carried out for several dried and swollen samples by varying the times of water exchange. As a result, the intensity and position of the carboxyl peak changed, and the relative intensity of the nonionized carboxyl groups of gels increased with an increasing number of water exchanges. These results indicated that hydrogen bonding was formed between the two, nonionized carboxyl groups (? COOH) and/or between the ? COOH and ? CONH? groups. The macroscopic polymer network shrinkage is discussed in terms of the replacement of counterions Na⁺ by H⁺ and of the formation of intermolecular hydrogen bonding. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1090–1098, 2004     

Anionic copolymerization of styrenic‐tipped macromonomers: A route to novel triblock–comb copolymers of styrene and isoprene

The following triblock–comb copolymers of isoprene (I) and styrene (S)—PS‐b‐(PI‐g‐PI)‐b‐PS, PS‐b‐[PI‐g‐(PI‐b‐PS)]‐b‐PS, and (PS‐g‐PS)‐b‐(PI‐g‐PI)‐b‐(PS‐g‐PS) (where PS is polystyrene and PI is polyisoprene)—with PS contents of 20–30% were synthesized with high‐vacuum techniques and the anionic copolymerization of styrenic‐tipped macromonomers with I and S. The macromonomers, prepared by the reaction of living PI or PS with 4‐(chlorodimethylsilyl) styrene, were used without isolation. Molecular characterization by size exclusion chromatography, size exclusion chromatography/two‐angle laser light scattering, and NMR spectroscopy indicated that the triblock–comb copolymers had high molecular and compositional homogeneity. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4030–4039, 2005     

Multiarm star block copolymers via Diels‐Alder click reaction

Two types of multiarm star block copolymers: (polystyrene)_m‐poly(divinylbenzene)‐poly(methyl methacrylate)_n, (PS)_m‐polyDVB‐(PMMA)_n and (polystyrene)_m‐poly(divinylbenzene)‐poly(tert‐butyl acrylate)_k, (PS)_m‐polyDVB‐(PtBA)_k were successfully prepared via a combination of cross‐linking and Diels–Alder click reactions based on “arm‐first” methodology. For this purpose, multiarm star polymer with anthracene functionality as reactive periphery groups was prepared by a cross‐linking reaction of divinyl benzene using α‐anthracene end functionalized polystyrene (PS‐Anth) as a macroinitiator. Thus, obtained multiarm star polymer was then reacted with furan protected maleimide‐end functionalized polymers: PMMA‐MI or PtBA‐MI at reflux temperature of toluene for 48 h resulting in the corresponding multiarm star block copolymers via Diels–Alder click reaction. The multiarm star and multiarm star block copolymers were characterized by using ¹H NMR, SEC, Viscotek triple detection SEC (TD‐SEC) and UV. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 178–187, 2009     

Characterization of free,restricted, and entrapped water environments in poly(N‐isopropyl acrylamide) hydrogels via 1H HRMAS PFG NMR spectroscopy

Different water environments in poly(N‐isopropyl acrylamide) (PNIPAAm) hydrogels are identified and characterized using ¹H high resolution magic angle spinning (HRMAS) nuclear magnetic resonance (NMR). Local water environments corresponding to a “free” highly mobile species, along with waters showing restricted dynamics are resolved in these swollen hydro‐gels. For photo‐initiated polymerized PNIPAAm gels, an additional entrapped water species is observed. Spin–spin R₂ relaxation experiments support the argument of reduced mobility in the restricted and entrapped water species. By combining pulse field gradient techniques with HRMAS NMR it is possible to directly measure the self‐diffusion rate for these different water environments. The behavior of the heterogeneous water environments through the lower critical solution temperature transition is described. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 1521–1527     

Characterization of the interaction energies for polystyrene blends with various methacrylate polymers

The binary interaction energies between styrene and various methacrylates were determined from newly examined phase boundaries with lattice–fluid theory. Because the blends of polystyrene (PS) and poly(cyclohexylmethacrylate) (PCHMA) were only miscible at high molecular weights when the blends were prepared by solution casting from tetrahydrofuran, we examined the miscibility of other blends by changing the molecular weights of PS or methacrylate polymers. On the basis of the phase‐separation temperature caused by the lower critical solution temperature, the miscibility of PS with the various methacrylates appeared to be in the order PCHMA > poly(n‐propyl‐methacrylate) (PnPMA) > poly(ethyl methacrylate) (PEMA) > poly(n‐butyl‐methacrylate) (PnBMA) > poly(iso‐butyl‐methacrylate) > poly(methyl methacrylate) (PMMA) > poly(tert‐butyl methacrylate), and the branching of butylmethacrylate appeared to decrease the miscibility with PS. The interaction energies between PS with various methacrylates obtained from phase boundaries with lattice–fluid theory reached minimum value corresponding to the styrene/n‐propylmethacrylate interaction. They were in the order PnPMA < PEMA < PCHMA < PnBMA < PMMA. The difference in the order of miscibility and interaction energies might be attributed to the terms related to the compressibility. The phase‐separation temperatures calculated with the interaction energies obtained here indicated that the PS/PEMA and PS/PnPMA blends at high molecular weights were miscible, whereas the PS/PnBMA blends were immiscible at high molecular weights. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 2666–2677, 2000     

Characterization of blends of poly(vinyl chloride) and poly(N‐vinyl pyrrolidone) by FTIR and 13C CP/MAS NMR spectroscopy

Blends of poly(vinyl chloride) (PVC) with Poly(N‐vinyl pyrrolidone) (PVP) were investigated by Fourier infrared spectroscopy (FTIR) and high‐resolution solid‐state ¹³C cross‐polarization/magic angle spinning (CP/MAS) nuclear magnetic resonance (NMR) spectroscopy. The intermolecular interactions between PVP and PVC are weaker than the self‐association of PVP and the inclusion of the miscible PVC results in the decreased self‐association of PVP chains, which was evidenced by the observation of high‐frequency shift of amide stretching vibration bands of PVP with inclusion of PVC. This result was further substantiated by the study of ¹³C CP/MAS spectra, in which the chemical shift of carbonyl resonance of PVP was observed to shift to a high field with inclusion of PVC, indicating that the magnetic shielding of the carbonyl carbon nucleus is increased. The proton spin‐lattice relaxation time in the laboratory frame (T₁ (H)) and the proton spin‐lattice relaxation time in the rotating frame (T_1ρ(H)) were measured as a function of the blend composition to give the information about phase structure. It is concluded that the PVC and PVP chains are intimately mixed on the scale of 20–30Å. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 2412–2419, 1999     

Magnetic particle‐loaded polymer brushes induced by external magnetic field: A Monte Carlo simulation

The effects of applied magnetic field on the system composed of polymer brushes and magnetic particles are studied by means of Monte Carlo simulation. The direction of the applied magnetic field is chosen to be perpendicular to the substrate plane. Polymer brushes and magnetic particles are attracted to each other. The average heights of polymer brushes depend not only on the strength of applied magnetic field (H) but also on the brush grafting density (σ) and the chain length (N). The applied magnetic field influences the arrangement of magnetic particles, and in turn, the arrangement of magnetic particles affects the spatial distribution of polymer brush monomers. When the strength of the magnetic field is increased, the average height of polymer brushes will be increased accordingly. The reason is that the orientations of the magnetic moments of particles must be along the magnetic field direction, and this leads polymer brushes to rearrange along the magnetic field direction. At the same time, the chain length and the grafting density of polymer brushes have also effects on the properties of the magnetic particles, such as the magnetic particles distribution, magnetic susceptibility, and pair correlation functions. Comparisons with the experimental ones are also made, and this investigation can provide some insights into statistical properties of magnetic particle‐loaded brushes induced by external magnetic field. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1873–1881, 2010     

Effect of the repeated unit length of guest polymers on the molecular motion of polymer blends within a miscible window

The effect of the repeated unit length on the substantially increasing molecular motion and entropy change (?TΔS_m) of polymer blends was investigated with solid‐state ¹³C NMR and differential scanning calorimetry within a miscible window. The hydrogen‐bonding strength, from the formation of the phenolic–polyester interaction, was not high enough to overcome the breaking‐off of the self‐association of the phenolic. With respect to the increasing repeated unit length, the polyester resonance intensity of the solid‐state ¹³C NMR spectra was weakened because of the reduction in the cross‐polarization efficiency in highly mobile samples. The glass‐transition temperature of the blend and the proton spin–lattice relaxation time from NMR experiments were also reduced. The effect of the reduced hydrogen‐bonding strength on blending brought about a tendency of higher entropy (?TΔS_m) and higher molecular mobility of the blend. Accordingly, poly(decamethylene adipate) possessed the longest repeated unit length and exhibited the most mobile one in this phenolic/polyester blend family. The molecular segmental motion and entropy progressively increased while the repeated unit length of the guest polymers increased within a miscible window. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 679–686, 2003     

Structural and dynamic study of chemically modified polyHIPE by solid‐state 13C NMR spectroscopy

The structure of laboratory‐made polyHIPEs was successfully characterized by cross‐polarity/magic‐angle spinning, solid‐state ¹³C NMR experiments. The signals of vinyl groups appeared in the spectrum of the polyHIPE precursor PH? CH?CH₂, which was prepared by the polymerization of the divinylbenzene continuous phase from a highly concentrated reverse emulsion. This material was chemically modified by the regioselective free‐radical addition of thiols to the pendant vinyl groups. Spectra of materials modified by the grafting of C₈ and C₁₂ alkyl chains, PH? SC₈ and PH? SC₁₂, respectively, were produced. The signals of the vinyl groups disappeared in favor of methylene groups. This experiment clearly established that the alkyl chains were covalently bound to the polymer. To elucidate the dynamic aspect of long chains in polyHIPE, we measured the ¹³C spin–lattice relaxation times (T₁) of PH? SC₁₂ from 25 to 100 °C with variable‐temperature, solid‐state, high‐resolution ¹³C NMR spectroscopy, revealing a strong variation in T₁ along the alkyl side chain. Furthermore, the crystallinity of a wide range of chemically modified polyHIPEs, including PH? SC₁₂, was studied with pulse ¹H NMR. © 2001 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 956–963, 2001     

Synthesis of a hyperbranched polythioketal with 100% degree of branching

A 100% hyperbranched polymer was successfully prepared by using 2‐[4‐(4‐mercaptobutoxy)phenoxy]‐9H‐fluoren‐9‐one as an AB₂ monomer in trifluoroacetic acid. The kinetics of the model reaction between 9‐fluorenone and 3‐mercaptopropionic acid was investigated. The reaction obeyed the second‐order kinetics, indicating that the first reaction, that is, the formation of the intermediate from 9‐fluorenone and 3‐mercaptopropionic acid, is considerably slower than the second one, that is, the reaction of the intermediate with 3‐mercaptopropionic acid. On the basis of this finding, a new monomer expected to produce a 100% branched hyperbranched polymer, 2‐[4‐(4‐mercaptobutoxy)phenoxy]‐9H‐fluoren‐9‐one, was designed and prepared. The obtained polymer was characterized by ¹H and ¹³C‐NMR spectroscopy, which confirmed that the polymer was a 100% branched hyperbranched polymer. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2689–2700, 2008     

Multiarm star polymers with peripheral dendritic PMMA arms through Diels–Alder click reaction

Dendritic 2‐ and 4‐arm PMMA‐based star polymers with furan‐protected maleimide at their focal point, (PMMA)_2n‐MI and (PMMA)_4n‐MI were efficiently clicked with the peripheral anthracene functionalized multiarm star polymer, (α‐anthryl functionalized‐polystyrene)_m‐poly(divinyl benzene) ((α‐anthryl‐PS)_m‐polyDVB) through the Diels–Alder reaction resulting in corresponding multiarm star block copolymers: (PMMA)_2n‐(PS)_m‐polyDVB and (PMMA)_4n‐(PS)_m‐polyDVB, respectively. Molecular weights (M_w,TDGPC), hydrodynamic radius (R_h), and intrinsic viscosity (η) of the multiarm star polymers were determined using three‐detection GPC (TD‐GPC). The high efficiency of this methodology to obtain such sterically demanding macromolecular constructs was deduced using ¹H‐NMR and UV–vis spectroscopy. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Influence of local chain dynamics on diffusion of gases in polymers as determined by pulsed field gradient NMR

Diffusion of gases in polymers below the glass transition temperature, T_g, is strongly modulated by local chain dynamics. For this reason, an analysis of pulsed field gradient (PFG) nuclear magnetic resonance (NMR) diffusion measurements considering the viscoelastic behavior of polymers is proposed. Carbon‐13 PFG NMR measurements of [¹³C]O₂ diffusion in polymer films at 298 K are performed. Data obtained in polymers with T_g above (polycarbonate) and below (polyethylene) the temperature set for diffusion measurements are analyzed with a stretched exponential. The results show that the distribution of diffusion coefficients in amorphous phases below T_g is wider than that above it. Moreover, from a PFG NMR perspective, full randomization of the dynamic processes in polymers below T_g requires long diffusion times, which suggests fluctuations of local chain density on a macroscopic scale may occur. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 231–235, 2010     

New π‐stacked benzofulvene polymer showing thermoreversible polymerization: Studies in macromolecular and aggregate structures and polymerization mechanism

The macromolecular and aggregate structures of poly[ethyl 1‐methylene‐3‐(4‐methylphenyl)‐1H‐indene‐2‐carboxylate] (poly‐ BF1 ; a new polymer based on a functionalized benzofulvene moiety showing interesting properties, i.e., thermoreversible polymerization/depolymerization behavior, high solubility in the most common organic solvents, and susceptibility to molecular manipulation) have been investigated with NMR spectroscopy, absorption and emission spectrophotometry, and transmission electron microscopy (TEM). Moreover, the polymerization mechanism has been studied to obtain further information on the polymer structure. The collected evidence is consistent in indicating for poly‐ BF1 a vinyl (1,2) polymer structure stabilized by means of aromatic stacking interactions. Furthermore, TEM studies performed on metal replicas have shown that the polymer is liable to give nanostructured aggregates. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3289–3304, 2005     

Nuclear magnetic relaxation in polyolefin resins

Nuclear magnetic resonance (NMR) spin–lattice relaxation times (T₁) in various polyethylene and polypropylene resins were measured at 20 MHz and at temperatures of 130–490 K. At each temperature and for all resins, only a single value of T₁ was found, which was consistent with the occurrence of rapid spin diffusion throughout the protons attached to the polymer chains. The data were analyzed for the estimation of activation energies corresponding to molecular motion causing spin–lattice relaxation. Two well‐defined minima were found for log_e(T₁) plotted as a function of temperature for all of the polypropylene resins. Single very broad minima were found for all of the polyethylene samples. In contrast, the free induction decay signals from all of the resins following single radio‐frequency pulses were observed to contain a rapidly decaying component followed by a much more slowly decaying signal. These components were used to estimate the amount of rigid component present in the solid resins at room temperature. Samples of one high‐density polyethylene and one low‐density polyethylene were irradiated with γ radiation up to a 500‐kGy dose to examine the effects of crosslinking on the NMR relaxation. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 572–584, 2002; DOI 10.1002/polb.10116     

High magnetic field solid‐state NMR analyses by combining MAS,MQ‐MAS,homo‐nuclear and hetero‐nuclear correlation experiments

A general strategy of structural analysis of alumina silicate by combining various solid‐state NMR measurements such as single pulse, multi‐quantum magic angle spinning, double‐quantum homo‐nuclear correlation under magic angle spinning (DQ‐MAS), and cross‐polarization hetero‐nuclear correlation (CP‐HETCOR) was evaluated with the aid of high magnetic field NMR (800 MHz for ¹H Larmor frequency) by using anorthite as a model material. The high magnetic field greatly enhanced resolution of ²⁷Al in single pulse, DQ‐MAS, and even in triple‐quantum magic angle spinning NMR spectra. The spatial proximities through dipolar couplings were probed by the DQ‐MAS methods for homo‐nuclear correlations between both ²⁷Al–²⁷Al and ²⁹Si–²⁹Si and by CP‐HETCOR for hetero‐nuclear correlations between ²⁷Al–²⁹Si in the anorthite framework. By combining various NMR methodologies, we elucidated detailed spatial correlations among various aluminum and silicon species in anorthite that was hard to be determined using conventional analytical methods at low magnetic field. Moreover, the presented approach is applicable to analyze other alumina‐silicate minerals. Copyright © 2012 John Wiley & Sons, Ltd.     

Synthesis and characterization of synthetic polymer colloids colloidally stabilized by cationized starch oligomers

A method is developed for anchoring enzymatically degraded cationized starch as electrosteric stabilizers onto synthetic latices, using cerium(IV) to create free‐radical grafting sites on the starch. Direct anchoring of debranched starch onto a poly(methyl methacrylate) seed latex yields a latex stabilized by well‐defined oligosaccharides. Using α‐amylase to randomly cleave starch to form (1→4)‐α‐glucans, and a comonomer, N‐isopropyl acrylamide (NIPAM), whose corresponding polymer exhibits a lower critical solution temperature (LCST), creates a means to synthesize block (or graft) oligomers of oligosaccharide and synthetic polymer, which are water soluble at room temperature. Above 30 °C, they become amphiphilic and form self‐emulsifying nanoparticles (sometimes termed “frozen micelles”) from which a synthetic latex is grown after addition of methyl methacrylate, the collapsed NIPAM‐containing entities functioning as a type of in situ seed. This synthesis of stable synthetic latex particles is shown to have a high grafting efficiency. The starch fragments were characterized by ¹H solution‐state NMR before grafting, and ¹³C solid‐state cross‐polarization magic‐angle spinning (CP‐MAS) NMR was used to characterize the starch oligomers actually grafted on the final latex. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1836–1852, 2009     

Solid polymer electrolytes. IV. Preparation and characterization of novel crosslinked epoxy‐siloxane polymer complexes as polymer electrolytes

Two series of novel crosslinked siloxane‐based polymers and their complexes with lithium perchlorate (LiClO₄) were prepared and characterized by Fourier transform infrared spectroscopy, solid‐state NMR (¹³C, ²⁹Si, and ⁷Li nuclei), and differential scanning calorimetry. Their thermal stability and ionic conductivity of these complexes were also investigated by thermogravimetric and AC impedance measurements. In these polymer networks, poly(propylene oxide) chains with different molecular weights were introduced through self‐synthesized epoxy‐siloxane precursors cured with two curing agents. The glass‐transition temperature (T_g) of these copolymers is dependent on the length of the ether units. The dissolution of LiClO₄ considerably increases the T_g of the polyether segments. The dependence of the ionic conductivity was investigated as a function of temperature, LiClO₄ concentration, and the molecular weight of the polyether segments. The ion‐transport behavior was affected by the combination of the ionic mobility and number of carrier ions. The ⁷Li solid‐state NMR line shapes of these polymer complexes suggest a significant interaction between Li⁺ ions and the polymer matrix, and temperature‐ and LiClO₄ concentration‐dependent chemical shifts are correlated with ionic conductivity. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1226–1235, 2002