9,9′‐spirobifluorene‐containing polycarbonates: Transparent polymers with high refractive index and low birefringence

Syntheses of 2,2′‐bisalcoholic group‐substituted 9,9′‐spirobifluorene monomers 2 were performed by the reaction of 2,2′‐dihydroxy‐9,9′‐spirobifluorene 2a with haloalcohols. Polycarbonates consisting of 9,9′‐spirobifluorene skeleton in the main chain (PC 4 ) were synthesized by the polycondensation of 2,2′‐bisalcoholic monomers 2 and triphosgene or diphenyl carbonate. PC 4 showed good thermal stability: the 5% weight loss temperature was over 330 °C under both nitrogen and air atmospheres. The glass transition temperature was in a range of 16–269 °C estimated by differential scanning calorimetry, depending on the flexibility of the alkylene or oxyethylene chains of 2 . PC 4 showed high solubility toward ordinary organic solvents such as CHCl₃, benzene, and THF, making possible the preparation of the flexible thin films. Very high refractive index in a range of 1.62–1.66 at 589 nm was observed although PC 4 consists only of C, H, and O atoms, whereas very low degree of birefringence was confirmed. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3658–3667, 2010     

Synthesis and characterization of soluble polyimides derived from 2,2′‐Bis(3,4‐dicarboxyphenoxy)‐9,9′‐spirobifluorene dianhydride

The synthesis of aromatic poly(ether imide)s containing spirobifluorene units in the polymer backbone is described. 2,2′‐Bis(3,4‐dicarboxyphenoxy)‐9,9′‐spirobifluorene dianhydride, which was used as a new monomer, was synthesized with 2,2′‐dihydroxy‐9,9′‐spirobifluorene as the starting material. In the spiro‐segment, the rings of the connected bifluorene were orthogonally arranged. This bis(ether anhydride) monomer was employed in reactions with a variety of aromatic diamines to furnish poly(ether imide)s, involving an initial ring‐opening polycondensation and subsequent chemically induced cyclodehydration. Excellent solubility in common organic solvents at room temperature, good optical transparency, and high thermal stability are the prominent characteristic features of these new polymers, which can be attributed to the presence of spiro‐fused orthogonal bifluorene segments along the polymer chain. The glass‐transition temperatures of the polyimides were 240–293 °C, and the 5% weight‐loss temperatures were greater than 500 °C. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 262–268, 2002     

Synthesis and properties of soluble aromatic polyamides derived from 2,2′‐bis(4‐carboxyphenoxy)‐9,9′‐spirobifluorene

The synthesis of a new bis(ether carboxylic acid), 2,2′‐bis(4‐carboxyphenoxy)‐9,9′‐spirobifluorene, in which two orthogonally arranged carboxyphenoxyfluorene entities are connected through an sp³ carbon atom (the spiro center), is reported. The direct phosphorylation polycondensation of this diacid monomer with various aromatic diamines yields aromatic polyamides containing 9,9′‐spirobifluorene moieties in the main chain. The presence of the spiro segment restricts the close packing of the polymer chains and decreases interchain interactions, resulting in amorphous polyamides with enhanced solubility, and high glass‐transition temperatures and good thermal stability are maintained through controlled segmental mobility. The glass‐transition temperatures of these polyamides are in the range of 234–306 °C, with 10% weight losses occurring at temperatures above 530 °C. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1160–1166, 2003     

Synthesis of fluorene‐based high performance polymers. I. Poly(arylene thioether)s with excellent solubility and high refractive index

Several poly(arylene thioether)s ( PTEs ) containing a fluorene moiety were synthesized by the polycondensation of masked dithiols such as 9,9‐bis(4‐(N,N‐dimethyl‐S‐carbamoyl)phenyl)fluorene and various difluoroarenes. All PTEs were obtained in quantitative yields. The PTEs showed good thermal stability: the 10% weight loss temperature was over 480 °C under both nitrogen and air atmosphere by TGA, and glass temperature was within a range of 204–275 °C by DSC. Most PTEs exhibited remarkably high refractive index values in a range of 1.66–1.72 at 589 nm, whereas they had a very low degree of birefringence properties. Furthermore, the PTEs showed high solubility in ordinary organic solvents such as chloroform, N‐methylpyrrolidone, and tetrahydrofuran. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3073–3082, 2007     

Synthesis and characterization of spirobifluorene‐based polyimides

The synthesis and properties of organosoluble aromatic polyimides, containing spiro‐skeletal units in the polymer backbone on the basis of the spiro‐diamine monomer, 2,2′‐diamino‐9,9′‐spirobifluorene, are described. In the case of the spiro segment, the two fluorene rings are orthogonally arranged and connected through a tetrahedral bonding carbon atom, the spiro center. As a consequence, the polymer chain is periodically zigzagged with a 90° angle at each spiro center. This structural feature minimizes interchain interactions and restricts the close packing of the polymer chains, resulting in amorphous polyimides that have good solubility in organic solvents. Compared with their fluorene‐based cardo analogues, the spirobifluorene‐based polyimides have an improved solubility. Furthermore, the main‐chain rigidity of the polyimide appears to be preserved because of the presence of the spiro structure, which restricts the free segmental mobility. As a result, these polyimides exhibit a high glass‐transition temperature (T_g's) and good thermal stability. The T_g's of these polyimides were in the range of 287–374 °C, and the decomposition temperatures in nitrogen for a 10% weight loss occurred at temperatures above 570 °C. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3615–3621, 2002     

Soluble fluorinated polyimides derived from 1,4‐ (4′‐aminophenoxy)‐2‐(3′‐trifluoromethylphenyl)benzene and aromatic dianhydrides

New fluorinated aromatic polyimides were prepared from 1,4‐(4′‐aminophenoxy)‐2‐(3′‐trifluoromethylphenyl)benzene and aromatic dianhydrides via the polycondensation of one‐step high‐temperature and two‐step thermal or chemical imidization methods. Experimental results indicated that some of the polyimides were soluble both in strong dipolar solvents (N‐methyl‐2‐pyrrolidone or N,N‐dimethylacetamide) and in common organic solvents such as tetrahydrofuran, CHCl₃, and acetone. The polyimides showed exceptional thermal and thermooxidative stability and good mechanical properties. No weight loss was detected before a temperature of 520 °C in nitrogen, and the glass‐transition temperatures ranged from 208 to 251 °C. Low dielectric constants (2.55–2.71 at 1 MHz), low refractive indices, and low water absorption were also observed. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2404–2413, 2001     

Synthesis of highly refractive and transparent polyimides derived from 4,4′‐thiobis[2″,6″‐dimethyl‐4″‐(p‐phenylenesulfanyl)aniline]

New sulfur‐containing aromatic diamines with methyl groups at the ortho position of amino groups have been developed to prepare highly refractive and transparent aromatic polyimides (PIs) in the visible region. All aromatic PIs derived from 4,4′‐thiobis[2″‐methyl‐4″‐(p‐phenylenesulfanyl)aniline ( 2 ), 4,4′‐thiobis[2,″6″‐dimethyl‐4″‐(p‐phenylenesulfanyl)aniline ( 5 ), and aromatic dianhydride, 4,4′‐[p‐thiobis(phenylenesulfanyl)]diphthalic anhydride ( 6 ) were prepared via a two‐step polycondensation. All PIs showed good thermal properties, such as 10% weight loss temperature in the range of 497–500 °C and glass transition temperatures above 196 °C. In addition, the PIs showed good optical properties, such as optical transparency above 75% at 450 nm with a 10‐μm film thickness, high refractive indices ranging from 1.7135 to 1.7301, and small in‐plane/out‐of‐plane birefringences between 0.0066 and 0.0076. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 656–662, 2010     

High solubility,low‐dielectric constant,and optical transparency of novel polyimides derived from 3,3′,5,5′‐tetramethyl‐4,4′‐diaminodiphenyl‐4″‐isopropyltoluene

A series of novel polyimides (PIs) ( 3a–d ) were prepared from 3,3′,5,5′‐tetramethyl‐4,4′‐diaminodiphenyl‐4 ″ ‐isopropyltoluene ( 1 ) with four aromatic dianhydrides via a one‐step high temperature polycondensation procedure. The obtained PIs showed excellent solubility, with most of them dissoluble at a concentration of 10 wt % in amide polar solvents and chlorinated solvents. Their films were nearly colorless and exhibited high‐optical transparency, with the UV cutoff wavelength in the range of 328–353 nm and the transparency at 450 nm >80%. They also showed low‐dielectric constant (2.49–2.94 at 1 MHz) and low‐water absorptions (0.44–0.65%). Moreover, these PIs possessed high‐glass transition temperatures (T_g) beyond 327 °C and excellent thermal stability with 10% weight loss temperatures in the range of 530–555 °C in nitrogen atmosphere. In comparison with some fluorinated poly(ether imide)s derived from the trifluoromethyl‐substituted bis(ether amine)s, the resultant PIs 3a–d showed better solubility, lower cutoff wavelength, and higher T_g. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3309–3317, 2009     

Fluorene‐rich high performance polyesters: Synthesis and characterization of 9,9‐fluorenylidene and 2,7‐fluorenylene‐based polyesters with excellent optical property

Polyesters PEs containing high content of fluorene units in their backbones were synthesized from 9,9‐diarene‐substituted fluorene diols ( 1 ) and fluorene‐based diacid chlorides ( 2 ) by high temperature polycondensation at 185 °C in diphenyl ether. The molecular weights of the polyesters PE1‐PE5 were in a range of M_w 25,000–165,000. The polyesters displayed their high thermostability: the glass transition temperatures (T_g) by differential scanning calorimetry analysis ranged from 109 to 217 °C, while the 10% weight loss temperatures (T_d10) measured by thermogravimetric analysis were over 400 °C in nitrogen and 395 °C in air. The polyesters had good solubility in most common organic solvents such as chloroform and toluene and gave tough, transparent and flexible cast films. The transmittance of the films was over 80% in the wavelength range from 450 to 700 nm in any PEs . The PEs exhibited high refractive index values around 1.65, while they had very low degree of birefringence. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2549–2556, 2008     

Highly refractive polymer resin derived from sulfur‐containing aromatic acrylate

New sulfur‐containing polymers with high‐refractive indices and low birefringences have been developed as UV‐curable high‐refractive polymer resins. The polymers derived from 2,7‐bis[(2‐acryloylethyl)sulfanyl]thianthrene (2,7‐BAST) and 4,4′‐bis[(acryloyloxyethylthio)diphenylsulfide (4,4′‐BADS) were prepared by photopolymerization under UV irradiation. Transparent UV‐cured films were obtained in both cases. Both polymers showed good thermal stability, such as a 5% weight‐loss temperature at 355 °C under nitrogen and glass transition temperatures (T_g) in the range of 94–143 °C. They also showed high‐refractive indices of 1.6531 and 1.6645 at 632.8 nm and low birefringences of 0.0039 and 0.0069 in addition to high transparency in the visible region. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2604–2609, 2010     

Synthesis and properties of highly refractive polyimides derived from fluorene‐bridged sulfur‐containing dianhydrides and diamines

Highly refractive and transparent polyimides (PIs) based on fluorene‐bridged and sulfur‐containing monomers have been developed. An aromatic dianhydride, 4,4′‐[p‐thiobis(phenylenesulfanyl)]diphthalic anhydride (3SDEA), was polymerized with several fluorene‐containing diamines, including commercially available 9,9′‐bis(p‐aminophenyl)fluorene (APF), 9,9′‐bis[4‐(p‐aminophenoxy)phenyl]fluorene (OAPF), and newly synthesized 9,9′‐bis[4‐(p‐aminophenyl)sulfanylphenyl]fluorene (ASPF) to afford series A PIs. Meanwhile, series B PIs were obtained from a new dianhydride, 4,4′‐[(9H‐fluorene‐9‐ylidene)bis(p‐phenylsulfanyl)]diphthalic anhydride (FPSP) and two aromatic diamines, ASPF and 4,4′‐thiobis[(p‐phenylenesulfanyl)aniline] (3SDA) via a two‐step polycondensation procedure. The PIs exhibit good thermal stabilities, such as relatively high glass transition temperatures in the range of 220–270 °C and high initial thermal decomposition temperatures (T_10%) exceeding 490 °C. The 9,9′‐disubstituted fluorene moieties endow the PI films with good optical transparency. The optical transmittances of the PI films at 450 nm are all higher than 80% for the thickness of about 10 μm. Furthermore, the highly aromatic fluorene moiety and flexible thioether linkages in the molecular chains of the PIs provide them with high refractive indices of 1.6951–1.7258 and small birefringence of 0.0056–0.0070. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1510–1520, 2008     

Preparation and physical properties of poly(4,4′‐diamino‐3′‐carbamoylbenzanilide terephthalamide) and poly(4,4′‐diamino‐3′‐carbamoylbenzanilide isophthalamide) films

To prepare thermally stable and high‐performance polymeric films, new solvent‐soluble aromatic polyamides with a carbamoyl pendant group, namely poly(4,4′‐diamino‐3′‐carbamoylbenzanilide terephthalamide) (p‐PDCBTA) and poly(4,4′‐diamino‐3′‐carbamoylbenzanilide isophthalamide) (m‐PDCBTA), were synthesized. The polymers were cyclized at around 200 to 350 °C to form quinazolone and benzoxazinone units along the polymer backbone. The decomposition onset temperatures of the cyclized m‐ and p‐PDCBTAs were 457 and 524 °C, respectively, lower than that of poly(p‐phenylene terephthalamide) (566 °C). For the p‐PDCBTA film drawn by 40% and heat‐treated, the tensile strength and Young's modulus were 421 MPa and 16.4 GPa, respectively. The film cyclized at 350 °C showed a storage modulus (E′) of 1 × 10¹¹ dyne/cm² (10 GPa) over the temperature range of room temperature to 400 °C. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 775–780, 2000     

Stimulated emission and ultrafast optical switching in a ter(9,9′‐spirobifluorene)‐co‐methylmethacrylate copolymer

A methacrylate‐functionalized 9,9′‐spirobifluorene trimer is copolymerized with methylmethacrylate (MMA). The photophysical characterization of this copolymer using pump‐probe studies, in solution, as films and in plastic optical fibers (POFs) demonstrates that it shows interesting photonic properties for data communication such as high‐stimulated emission cross section (σ_SE = 2.5 × 10^?16 cm²), good thermal, and optical stability, the ability to perform all‐optical ultrafast switching, and low attenuation when doped into POFs. In addition, the material shows interesting optically induced conformational control in solution and the studies demonstrate the surprising result that intrachain polaron pairs can be generated even in well‐isolated 3‐unit oligomers. Although the material is not yet soluble enough in MMA to create highly efficient photonic devices and the gain spectrum is not optimized to overlap with the region of low attenuation in polymethylmethacrylate POFs, these studies are a good starting point to further optimize copolymers for incorporation into POF networks. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2010     

Electrochromic material containing unsymmetrical substituted N,N,N′,N′‐tetraaryl‐1,4‐phenylenediamine: Synthesis and their optical,electrochemical, and electrochromic properties

A novel dibromo compound containing unsymmetrical substituted bi‐triarylamine was synthesized. A conjugated polymer was prepared via the Suzuki coupling from the newly prepared dibromo compound and 9,9‐dioctylfluorene‐2,7‐bis(trimethyleneboronate). The glass transition temperature (T_g) of the conjugated polymer was 140 °C, 10% weight‐loss temperatures (T_d10) in nitrogen was 458 °C, and char yield at 800 °C in nitrogen higher than 64%. Cyclic voltammogram of the polymer film cast onto an indium‐tin oxide (ITO)‐coated glass substrate exhibited two reversible oxidation redox couples at 0.70 and 1.10 V versus Ag/Ag⁺ in acetonitrile solution. The polymer films revealed excellent stability of electrochromic characteristics, with a color change from yellow green of the neutral form to the dark green and blue of oxidized forms at applied potentials ranging from 0 to 1.3 V. The color switching time and bleaching time were 4.25 and 7.22 s for 860 nm and 5.51 s and 6.48 s for 560 nm. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1469–1476, 2010     

Synthesis and characterization of poly(1,4‐bis((E)‐2‐(3‐dodecylthiophen‐2‐yl)vinyl)benzene) derivatives

New amorphous semiconducting copolymers, poly(9,9‐dialkylfluorene)‐alt‐(3‐dodecylthienyl‐divinylbenzene‐3‐dodecylthienyl) derivatives (PEFTVB and POFTVB), were designed, synthesized, and characterized. The structure of copolymers was confirmed by H NMR, IR, and elemental analysis. The copolymers showed very good solubility in organic solvents and high thermal stability with high T_g of 178–185 °C. The weight average molecular weight was found to be 107,900 with polydispersity of 3.14 for PEFTVB and 76,700 with that of 3.31 for POFTVB. UV–vis absorption studies showed the maximum absorption at 428 nm (in solution) and 435 nm (in film) for PEFTVB and at 430 nm (in solution) and 436 nm (in film) for POFTVB. Photoluminescence studies showed the emission at 498 nm (in solution) and 557 nm (in film) for PEFTVB and at 498 nm (in solution) and 536 nm (in film) for POFTVB. The solution‐processed thin‐film transistors showed the carrier mobility of 2 × 10^?4 cm² V^?1 s^?1 for PEFTVB‐based devices and 2 × 10^?5 cm² V^?1 s^?1 for POFTVB‐based devices. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3942–3949, 2010     

Novel blue‐greenish electroluminescent poly(fluorenevinylene‐alt‐dibenzothiophenevinylene)s and their model compounds

Poly(9,9‐dihexylfluorene‐2,7‐vinylene‐alt‐dibenzothiophene‐2,8‐vinylene) (PS) and poly(9,9‐dihexylfluorene‐2,7‐vinylene‐alt‐dibenzothiophene‐5,5‐dioxide‐2,8‐ vinylene) (PSO) as well as corresponding model compounds were synthesized by Heck coupling. Both the polymers and model compounds were readily soluble in common organic solvents such as tetrahydrofuran, dichloromethane, chloroform, and toluene. The polymers showed a decomposition temperature at ～430 °C and a char yield of about 65% at 800 °C in N₂. The glass‐transition temperatures of the polymers were almost identical (75–77 °C) and higher than those of the model compounds (26–45 °C). All samples absorbed around 390 nm, and their optical band gaps were 2.69–2.85 eV. They behaved as blue‐greenish light emitting materials in both solutions and thin films, with photoluminescence emission maxima at 450–483 nm and photoluminescence quantum yields of 0.52–0.72 in solution. Organic light‐emitting diodes with an indium tin oxide/poly(ethylene dioxythiophene):poly(styrene sulfonic acid)/polymer/Mg:Ag/Ag configuration with polymers PS and PSO as emitting layers showed green electroluminescence with maxima at 530 and 540 nm, respectively. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6790–6800, 2006     

A hybrid‐type,chiral π‐conjugated polymer wrapped with polyhedral oligomeric silsesquioxanes

A novel hybrid‐type chiral binaphthyl‐based polyarylene derivative with polyhedral oligomeric silsesquioxanes (POSS) units 2a was prepared by Suzuki–Miyaura coupling polymerization from a chiral (R)‐6,6′‐dibromo‐2,2′‐diPOSS‐substituted 1,1′‐binaphthyl derivative 1a and p‐biphenylene diboronic acid. As a reference, a binaphthyl‐based polyarylene derivative without POSS unit 2b was also prepared. The obtained polymers were studied with thermogravimetric analysis, optical rotations, circular dichroism (CD), ultraviolet‐visible, and photoluminescence (PL) spectra. Gel permeation chromatography measurements of 2a and 2b showed that their number‐average molecular weights were 13,300 and 16,500, respectively. The thermal stability of POSS‐modified polymer 2a (temperature of 10% weight loss; T₁₀ = 380 °C) was extremely high compared with that of polymer without POSS unit 2b (T₁₀ = 335 °C) due to the siliceous bulky POSS segments on the side chains. The specific optical rotation [α]_D was ?66.7° (c 0.06, CHCl₃) for 2a and ?62.3° (c 0.06, CHCl₃) for 2b . The CD spectra showed that these two polymers had very similar and strong Cotton effects. Film polymer 2a showed almost the same PL spectrum as that in dilute CHCl₃ solution, indicating that bulky POSS units strongly suppressed intermolecular aggregation of the π‐conjugated polymer backbone. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6035–6040, 2008     

Synthesis of 9,9‐bis(4‐aminophenyl)fluorene‐based benzoxazine and properties of its high‐performance thermoset

A benzoxazine ( P‐bapf ) based on 9,9‐bis(4‐aminophenyl)fluorene (BAPF), phenol, and formaldehyde was successfully prepared using two‐pot and one‐pot procedures. In the two‐pot approach, BAPF initially reacted with 2‐hydroxybenzaldehyde, leading to 9,9‐bis(4‐(2‐hydroxybenzylideneimino)phenyl)fluorene. The imine linkages of 9,9‐bis(4‐(2‐hydroxybenzylideneimino)phenyl)fluorene were then reduced by sodium borohydride, forming 9,9‐bis(4‐(2‐hydroxybenzylamino)phenyl)fluorene. Finally, paraformaldehyde was added to induce ring closure condensation, forming benzoxazine ( P‐bapf ). In the one‐pot approach, P‐bapf was obtained directly by reacting BAPF, phenol, and paraformaldehyde in various solvents. Among the solvents, we found that using toluene/ethanol (2/1, v/v) as a solvent leads to the best purity and yield. No gelation was observed in the preparation. The structure of the resulting benzoxazine was confirmed by ¹H, ¹³C, ¹H? ¹H and ¹H? ¹³C NMR spectra. P‐bapf exhibits a photoluminescent emission at 395 nm under an excitation of 275 nm. After curing, the resulting P‐bapf thermoset exhibits T_g as high as 236 °C, and the T_g can be further increased to 260 °C by copolymerization with an equal equivalent of cresol novolac epoxy. The 5% degradation temperature of the P‐bapf thermoset reaches as high as 413 °C (N₂) and 431 °C (air). The refractive index at 589 nm is as high as 1.70, demonstrating a high refractive index characteristic of fluorene linkage. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Hyperbranched framework of interrupted π‐conjugated polymers end‐capped with high carrier‐mobility moieties for stable light‐emitting materials with low driving voltage

A novel series of soluble hyperbranched interrupted π‐conjugated polymers (HICPs) based on complicated 9,9‐diarylfluorenes (CDAFs) branching core and end‐capped with high carrier‐mobility pyrene moieties were synthesized via the “A₂ + A′₂ + B₃” type Suzuki coupling condensation. The new polymer architecture improves the spectrum stability than the corresponding linear and hyperbranched polymers in PLEDs. Besides, it overcomes the drawback of high driving voltage of common interrupted π‐conjugated polymers. CDAF1 exhibits excellent thermal and morphological stability with a decomposition temperature (T_d) higher than 445 °C and a glass transition temperature (T_g) up to 128 °C. No obvious low‐energy green emission band at 520 nm was observed under extreme thermal annealing conditions in air at 200 °C for 12 h. The CDAF1 device shows stable blue emission with the peak at 422 and 447 nm. The Commission International d'Eclairage (CIE) 1931 coordinates is (0.18, 0.16) and the brightness reaches 1051 cd/m² at 15.7 V. White PLED based on CDAF1/MEH‐PPV blends exhibits a low turn‐on voltage of 4.8 V with voltage‐independent CIE of (0.32, 0.32). Molecular simulations were used to investigate the conformation and interchain interaction. HICPs based on CDAFs tethered with high‐mobility moieties are promising stable blue and host materials. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6451–6462, 2009     

Syntheses and properties of organosoluble polyimides based on 5,5′‐bis[4‐(4‐aminophenoxy)phenyl]‐4, 7‐methanohexahydroindan

A series of organosoluble aromatic polyimides (PIs) was synthesized from 5,5′‐bis[4‐(4‐aminophenoxy)phenyl]‐4,7‐methanohexahydroindan (3) and commercial available aromatic dianhydrides such as 3,3′,4,4′‐biphenyltetracarboxylic dianhydride (BPDA), 4,4′‐oxydiphthalic anhydride (ODPA), 4,4′‐sulfonyl diphthalic anhydride (SDPA), or 2,2′‐bis(3,4‐dicarboxyphenyl) hexafluoropropanic dianhydride (6FDA). PIs (III_c–f), which were synthesized by direct polymerization in m‐cresol, had inherent viscosities of 0.83–1.05 dL/g. These polymers could easily be dissolved in N,N′‐dimethylacetamide (DMAc), N‐methyl‐2‐pyrrolidone (NMP), N,N‐dimethylformamide (DMF), pyridine, m‐cresol, and dichloromethane. Whereas copolymerization was proceeded with equivalent molar ratios of pyromellitic dianhydride (PMDA)/6FDA, 3,3′,4,4′‐benzophenonetetracarboxylic dianhydride (BTDA)/6FDA, or BTDA/SDPA, or ½ for PMDA/SDPA, copolyimides (co‐PIs), derived from 3 and mixed dianhydrides, were soluble in NMP. All the soluble PIs could form transparent, flexible, and tough films, and they showed amorphous characteristics. These films had tensile strengths of 88–111 MPa, elongations at break of 5–10% and initial moduli of 2.01–2.67 GPa. The glass transition temperatures of these polymers were in the range of 252–311°C. Except for III_e, the 10% weight loss temperatures (T_d) of PIs were above 500°C, and the amount of carbonized residues of the PIs at 800°C in nitrogen atmosphere were above 50%. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1681–1691, 1999