Multiarm star polymers with peripheral dendritic PMMA arms through Diels–Alder click reaction

Dendritic 2‐ and 4‐arm PMMA‐based star polymers with furan‐protected maleimide at their focal point, (PMMA)_2n‐MI and (PMMA)_4n‐MI were efficiently clicked with the peripheral anthracene functionalized multiarm star polymer, (α‐anthryl functionalized‐polystyrene)_m‐poly(divinyl benzene) ((α‐anthryl‐PS)_m‐polyDVB) through the Diels–Alder reaction resulting in corresponding multiarm star block copolymers: (PMMA)_2n‐(PS)_m‐polyDVB and (PMMA)_4n‐(PS)_m‐polyDVB, respectively. Molecular weights (M_w,TDGPC), hydrodynamic radius (R_h), and intrinsic viscosity (η) of the multiarm star polymers were determined using three‐detection GPC (TD‐GPC). The high efficiency of this methodology to obtain such sterically demanding macromolecular constructs was deduced using ¹H‐NMR and UV–vis spectroscopy. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Multiarm star block and multiarm star mixed‐block copolymers via azide‐alkyne click reaction

The synthesis of multiarm star block (and mixed‐block) copolymers are efficiently prepared by using Cu(I) catalyzed azide‐alkyne click reaction and the arm‐first approach. α‐Silyl protected alkyne polystyrene (α‐silyl‐alkyne‐PS) was prepared by ATRP of styrene (St) and used as macroinitiator in a crosslinking reaction with divinyl benzene to successfully give multiarm star homopolymer with alkyne periphery. Linear azide end‐functionalized poly(ethylene glycol) (PEG‐N₃) and poly (tert‐butyl acrylate) (PtBA‐N₃) were simply clicked with the multiarm star polymer described earlier to form star block or mixed‐block copolymers in N,N‐dimethyl formamide at room temperature for 24 h. Obtained multiarm star block and mixed‐block copolymers were identified by using ¹H NMR, GPC, triple detection‐GPC, atomic force microscopy, and dynamic light scattering measurements. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 99–108, 2010     

Multiarm star triblock terpolymers via sequential double click reactions

Multiarm star triblock terpolymers were obtained by using two different click reactions sequentially: Cu(I) catalyzed azide–alkyne and Diels–Alder. The synthetic strategy is described as follows: (poly(methyl methacrylate))_n‐(polystyrene)_m‐poly(divinyl benzene)) ((PMMA)_n‐(PS)_m‐polyDVB) multiarm star diblock copolymer was first obtained from an azide–alkyne click reaction of (alkyne‐PS)_m‐polyDVB multiarm star polymer with α‐anthracene‐ω‐azide PMMA (anth‐PMMA‐N₃), followed by a Diels–Alder click reaction of the anthracene groups at the star periphery with α‐maleimide poly (tert‐butyl acrylate) (PtBA‐MI) or α‐maleimide poly(ethylene glycol) (PEG‐MI) leading to target (PtBA)_k‐(PMMA)_n‐(PS)_m‐polyDVB and (PEG)_p‐(PMMA)_n‐(PS)_m‐polyDVB multiarm star triblock terpolymers. The hydrodynamic diameter of individual multiarm star triblock terpolymers were measured by dynamic light scattering (DLS) to be ～24–27 nm in consistent with the atomic force microscopy (AFM) images on silicon substrates. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1557–1564, 2010     

Multiarm star block copolymers via Diels‐Alder click reaction

Two types of multiarm star block copolymers: (polystyrene)_m‐poly(divinylbenzene)‐poly(methyl methacrylate)_n, (PS)_m‐polyDVB‐(PMMA)_n and (polystyrene)_m‐poly(divinylbenzene)‐poly(tert‐butyl acrylate)_k, (PS)_m‐polyDVB‐(PtBA)_k were successfully prepared via a combination of cross‐linking and Diels–Alder click reactions based on “arm‐first” methodology. For this purpose, multiarm star polymer with anthracene functionality as reactive periphery groups was prepared by a cross‐linking reaction of divinyl benzene using α‐anthracene end functionalized polystyrene (PS‐Anth) as a macroinitiator. Thus, obtained multiarm star polymer was then reacted with furan protected maleimide‐end functionalized polymers: PMMA‐MI or PtBA‐MI at reflux temperature of toluene for 48 h resulting in the corresponding multiarm star block copolymers via Diels–Alder click reaction. The multiarm star and multiarm star block copolymers were characterized by using ¹H NMR, SEC, Viscotek triple detection SEC (TD‐SEC) and UV. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 178–187, 2009     

Star polymers with POSS via azide–alkyne click reaction

Azidopropyl‐heptaisobutyl‐substituted polyhedral oligomeric silsesquioxane (POSS‐N₃) was reacted with 1,1,1‐tris[4‐(2‐propynyloxy)phenyl]‐ethane ( 1 ) and poly(ethylene glycol) (PEG)‐b‐poly(methyl methacrylate) (PMMA) copolymer with alkyne at its center (PEG‐PMMA‐alkyne) affording the first time synthesis of 3‐arm star POSS and PEG‐PMMA‐POSS 3‐miktoarm star terpolymer, respectively, in the presence of CuBr/N,N,N′,N″,N″‐pentamethyldiethylenetriamine as catalyst and N,N‐dimethylformamide/tetrahydrofuran as solvent at room temperature. The precursors and the target star polymers were characterized comprehensively by ¹H NMR, GPC, and DSC. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5947–5953, 2009     

ABC‐type hetero‐arm star terpolymers through “Click” chemistry

Hetero‐arm star ABC‐type terpolymers, poly(methyl methacrylate)‐polystyrene‐poly(tert‐butyl acrylate) (PMMA‐PS‐PtBA) and PMMA‐PS‐poly(ethylene glycol) (PEG), were prepared by using “Click” chemistry strategy. For this, first, PMMA‐b‐PS with alkyne functional group at the junction point was obtained from successive atom transfer radical polymerization (ATRP) and nitroxide‐mediated radical polymerization (NMP) routes. Furthermore, PtBA obtained from ATRP of tBA and commercially available monohydroxyl PEG were efficiently converted to the azide end‐functionalized polymers. As a second step, the alkyne and azide functional polymers were reacted to give the hetero‐arm star polymers in the presence of CuBr/N,N,N′,N″,N″‐pentamethyldiethylenetriamine ( PMDETA) in DMF at room temperature for 24 h. The hetero‐arm star polymers were characterized by ¹H NMR, GPC, and DSC. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5699–5707, 2006     

Three‐arm star ring opening metathesis polymers via alkyne‐azide click reaction

The click chemistry strategy is successfully applied for the preparation of three‐arm star (A₃) ring opening metathesis polymers. A well‐defined monoazide end‐functionalized poly(N‐ethyl oxanorbornene) and a poly(N‐butyl oxanorbornene) obtained via ring opening metathesis polymerization using first generation Grubbs' catalyst are simply clicked with the trisalkyne core affording the synthesis of target star polymers. The obtained star polymers are characterized via nuclear magnetic resonance spectroscopy and gel permeation chromatography (GPC). The deconvolution analyses of GPC traces reveal that the click reaction efficiency for the star formation strongly depends on the chemical nature and the molecular weight of ROM polymers. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2344–2351, 2009     

Using the new in–in method for the synthesis of polyisoprene/polystyrene heteroarm star polymers

The basis of the two‐step in–in method is as follows: star polymers with poly(divinyl benzene) cores, synthesized by the arm‐first method, include many unreacted double bonds in their core, and these double bonds can be attacked by the carbanions of some monomers such as styrene and dienes. In this work, linear polyisoprene chains were used to attack the double bonds existing in the poly(divinyl benzene) cores of polystyrene star polymers, so that a heteroarm star polymer with polystyrene and polyisoprene arms was synthesized. It was later well characterized with size exclusion chromatography, light scattering, viscometry, UV spectroscopy, dynamic mechanical thermal analysis, and ¹H NMR. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 135–142, 2003     

Synthesis of ABCD 4‐miktoarm star polymers by combination of RAFT,ROP, and “Click Chemistry”

The ABCD 4‐miktoarm star polymers based on polystyrene (PS), poly(ε‐caprolactone) (PCL), poly(methyl acrylate) (PMA), and poly(ethylene oxide) (PEO) were synthesized and characterized successfully. Using the mechanism transformation strategy, PS with three different functional groups (i.e., hydroxyl, alkyne, and trithiocarbonate), PS‐HEPPA‐SC(S)SC₁₂H₂₅, was synthesized by the reaction of the trithiocarbonate‐terminated PS with 2‐hydroxyethyl‐3‐(4‐(prop‐2‐ynyloxy)phenyl) acrylate (HEPPA) in tetrahydrofuran (THF) solution. Subsequently, the ring‐opening polymerization (ROP) of ε‐caprolactone (CL) was carried out in the presence of stannous(II) 2‐ethylhexanoate and PS‐HEPPA‐SC(S)SC₁₂H₂₅, and then the PS‐HEPPA(PCL)‐SC(S)SC₁₂H₂₅ obtained was used in reversible addition‐fragmentation chain transfer (RAFT) polymerization of methyl acrylate (MA) to produce the ABC 3‐miktoarm star polymer, S(PS)(PCL)(PMA) carrying an alkyne group. The ABCD 4‐miktoarm star polymer, S(PS)(PCL)(PMA)(PEO) was successfully prepared by click reaction of the alkyne group on the HEPPA unit with azide‐terminated PEO (PEO‐N₃). The target polymer and intermediates were characterized by NMR, FTIR, GPC, and DSC. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6641–6653, 2008     

Star polymers by cross‐linking of linear poly(benzyl‐L‐glutamate) macromonomers via free‐radical and RAFT polymerization. A simple route toward peptide‐stabilized nanoparticles

Poly(benzyl‐L ‐glutamate) (PBLG) macromonomers were synthesized by N‐carboxyanhydride (NCA) polymerization initiated with 4‐vinyl benzylamine. MALDI‐ToF analysis confirmed the presence of styrenic end‐groups in the PBLG. Free‐radical and RAFT polymerization of the macromonomer in the presence of divinyl benzene produced star polymers of various molecular weights, polydispersity, and yield depending on the reaction conditions applied. The highest molecular weight (M_w) of 10,170,000 g/mol was obtained in a free‐radical multibatch approach. It was shown that the PBLG star polymers can be deprotected to obtain poly(glutamic acid) star polymers, which form water soluble pH responsive nanoparticles. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Star‐shaped cyclopolymers: A new category of star polymer with rigid cyclized arms prepared by controlled cationic cyclopolymerization and subsequent microgel formation of divinyl ethers

The combination of living/controlled cationic cyclopolymerization and crosslinking polymerization of bifunctional vinyl ethers (divinyl ethers) was applied to the synthesis of core‐crosslinked star‐shaped polymers with rigid cyclized arms. Cyclopolymerization of 4,4‐bis(vinyloxymethyl)cyclohexene ( 1 ), a divinyl ether with a cyclohexene group, was investigated with the hydrogen chloride/zinc chloride (HCl/ZnCl₂) initiating system in toluene at 0 °C. The reaction proceeded quantitatively to give soluble poly( 1 )s in organic solvents. The content of the unreacted vinyl groups in the produced polymers was less than ～3 mol%, and therefore, the degree of cyclization of the polymers was determined to be ～97%. The number‐average molecular weight (M_n) of the polymers increased in direct proportion to monomer conversion and further increased on addition of a fresh monomer feed to the almost completely polymerized reaction mixture, indicating that living cyclopolymerization of 1 occurred. The chain linking reactions among the formed living cyclopolymers with 1,4‐bis(vinyloxy)cyclohexane ( 3 ) as a crosslinker in toluene at 0 °C produced core‐crosslinked star‐shaped cyclopoly( 1 )s [star‐poly( 1 )s] in high yield (100%). Dihydroxylation of the cyclohexene double bonds of star‐poly( 1 ) gave hydrophilic water‐soluble star‐shaped polymers with rigid arm structure [star‐poly( 1 )‐OH] with thermo‐responsive function in water. T_gs of star‐poly( 1 ) and star‐poly( 1 )‐OH were 135 °C and 216 °C, respectively; these values are very high as vinyl ether‐based star‐shaped polymers. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1094–1102     

Synthesis of well‐defined 7‐arm and 21‐arm poly(N‐isopropylacrylamide) star polymers with β‐cyclodextrin cores via click chemistry and their thermal phase transition behavior in aqueous solution

The syntheses of well‐defined 7‐arm and 21‐arm poly(N‐isopropylacrylamide) (PNIPAM) star polymers possessing β‐cyclodextrin (β‐CD) cores were achieved via the combination of atom transfer radical polymerization (ATRP) and click reactions. Heptakis(6‐deoxy‐6‐azido)‐β‐cyclodextrin and heptakis[2,3,6‐tri‐O‐(2‐azidopropionyl)]‐β‐cyclodextrin, β‐CD‐(N₃)₇ and β‐CD‐(N₃)₂₁, precursors were prepared and thoroughly characterized by nuclear magnetic resonance and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry. A series of alkynyl terminally functionalized PNIPAM (alkyne‐PNIPAM) linear precursors with varying degrees of polymerization (DP) were synthesized via atom transfer radical polymerization (ATRP) of N‐isopropylacrylamide using propargyl 2‐chloropropionate as the initiator. The subsequent click reactions of alkyne‐PNIPAM with β‐CD‐(N₃)₇ and β‐CD‐(N₃)₂₁ led to the facile preparation of well‐defined 7‐arm and 21‐arm star polymers, namely β‐CD‐(PNIPAM)₇ and β‐CD‐(PNIPAM)₂₁. The thermal phase transition behavior of 7‐arm and 21‐arm star polymers with varying molecular weights were examined by temperature‐dependent turbidity and micro‐differential scanning calorimetry, and the results were compared to those of linear PNIPAM precursors. The anchoring of PNIPAM chain terminal to β‐CD cores and high local chain density for star polymers contributed to their considerably lower critical phase separation temperatures (T_c) and enthalpy changes during phase transition as compared with that of linear precursors. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 404–419, 2009     

3‐miktoarm star terpolymers using triple click reactions: Diels–Alder,copper‐catalyzed azide‐alkyne cycloaddition,and nitroxide radical coupling reactions

Well‐defined linear furan‐protected maleimide‐terminated poly(ethylene glycol) (PEG‐MI), tetramethylpiperidine‐1‐oxyl‐terminated poly(ε‐caprolactone) (PCL‐TEMPO), and azide‐terminated polystyrene (PS‐N₃) or ‐poly(N‐butyl oxanorbornene imide) (PONB‐N₃) were ligated to an orthogonally functionalized core ( 1 ) in a two‐step reaction mode through triple click reactions. In a first step, Diels–Alder click reaction of PEG‐MI with 1 was performed in toluene at 110 °C for 24 h to afford α‐alkyne‐α‐bromide‐terminated PEG (PEG‐alkyne/Br). As a second step, this precursor was subsequently ligated with the PCL‐TEMPO and PS‐N₃ or PONB‐N₃ in N,N‐dimethylformamide at room temperature for 12 h catalyzed by Cu(0)/Cu(I) through copper‐catalyzed azide‐alkyne cycloaddition and nitroxide radical coupling click reactions, yield resulting ABC miktoarm star polymers in a one‐pot mode. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Syntheses of 12‐arm star polymers and star diblock copolymers by nitroxide‐mediated radical polymerization using dendritic dodecafunctional macroinitiators

Dendritic multifunctional macroinitiators having 12 TEMPO‐based alkoxyamines were prepared by the reaction of a benzyl alcohol having 4 TEMPO‐based alkoxyamines with 1,3,5‐tris[(4‐chlorocarbonyl)phenyl]benzene and 1,3,5‐tris(4‐isocyanatophenyl)benzene. Using the dodecafunctional macroinitiators, TEMPO‐mediated radical polymerizations of styrene (St) were carried out at 120 °C, and 12‐arm star polymers ( star‐12 ) with narrow polydispersities of M_w/M_n = 1.06–1.26 were obtained. To evaluate the livingness for the TEMPO‐mediated radical polymerizations of St, hydrolysis of the ester bonds of the 12‐arm star polymers and subsequent SEC measurements were carried out. Furthermore, using star‐12 as the macroinitiator, TEMPO‐mediated radical polymerization of 4‐vinylpyridine (4‐VP) was carried out, and well‐defined poly(St)‐b‐poly(4‐VP) 12‐arm star diblock copolymers with M_w/M_n = 1.18–1.19 were obtained. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3689–3700, 2005     

ABCD 4‐miktoarm star quarterpolymers using click [3 + 2] reaction strategy

Two samples of ABCD 4‐miktoarm star quarterpolymer with A = polystyrene (PS), B = poly(ε‐caprolactone) (PCL), C = poly(methyl methacrylate) (PMMA) or poly(tert‐butyl acrylate) (PtBA), and D = poly(ethylene glycol) (PEG) were prepared using click reaction strategy (Cu(I)‐catalyzed Huisgen [3 + 2] reaction). Thus, first, predefined block copolymers of different polymerization routes, PS‐b‐PCL with azide and PMMA‐b‐PEG and PtBA‐b‐PEG copolymers with alkyne functionality, were synthesized and then these blocks were combined together in the presence of Cu(I)/N,N,N′,N″,N″‐pentamethyldiethylenetriamine as a catalyst in DMF at room temperature to give the target 4‐miktoarm star quarterpolymers. The obtained miktoarm star quarter polymers were characterized by GPC, NMR, and DSC measurements. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1218–1228, 2008     

Preparation of 3‐arm star polymers (A3) via Diels–Alder click reaction

Diels–Alder click reaction was successfully applied for the preparation of 3‐arm star polymers (A₃) using furan protected maleimide end‐functionalized polymers and trianthracene functional linking agent (2) at reflux temperature of toluene for 48 h. Well‐defined furan protected maleimide end‐functionalized polymers, poly (ethylene glycol), poly(methyl methacrylate), and poly(tert‐butyl acrylate) were obtained by esterification or atom transfer radical polymerization. Obtained star polymers were characterized via NMR and GPC (refractive index and triple detector detection). Splitting of GPC traces of the resulting polymer mixture notably displayed that Diels–Alder click reaction was a versatile and a reliable route for the preparation of A₃ star polymer. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 302–313, 2008     

Synthesis and characterization of “Living” star‐shaped poly(N‐vinylcaprolactam) with four arms and carboxylic acid end groups

Poly(N‐vinylcaprolactam) (PNVCL) star‐shaped polymers with four arms and carboxyl end groups were synthesized by reversible addition–fragmentation chain transfer (RAFT) polymerization of N‐vinylcaprolactam (NVCL) employing a tetrafunctional trithiocarbonate as an R‐RAFT agent. The resulting star polymers were characterized using ¹H NMR, FT‐IR, gel permeation chromatography (GPC), and UV–vis. Molecular weight of star polymers were analyzed by GPC and UV–vis being observed that the values obtained were very similar. Furthermore, the thermosensitive behavior of the star polymers was studied in aqueous solution by measuring the lower critical solution temperature by dynamic light scattering. Star‐shaped PNVCL were chain extended with ethyl‐hexyl acrylate (EHA) to yield star PNVCL‐b‐PEHA copolymers with an EHA molar content between 4% and 6% proving the living character of the star‐shaped macroCTA. These star block copolymers form aggregates in aqueous solutions with a hydrodynamic diameter ranged from 170 to 225 nm. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2156–2165     

Star polymers by photoinduced copper‐catalyzed azide–alkyne cycloaddition click chemistry

Well‐defined star polymers consisting of tri‐, tetra‐, or octa‐arms have been prepared via coupling‐onto strategy using photoinduced copper(I)‐catalyzed 1,3‐dipolar cycloaddition click reaction. An azide end‐functionalized polystyrene and poly(methyl methacrylate), and an alkyne end‐functionalized poly(ε‐caprolactone) as the integrating arms of the star polymers are prepared by the combination of controlled polymerization and nucleophilic substitution reactions; whereas, multifunctional cores containing either azide or alkyne functionalities were synthesized in quantitatively via etherification and ring‐opening reactions. By using photoinduced copper‐catalyzed azide–alkyne cycloaddition (CuAAC) click reaction, reactive linear polymers are simply attached onto multifunctional cores to form corresponding star polymers via coupling‐onto methodology. The chromatographic, spectroscopic, and thermal analyses have clearly demonstrated that successful star formations can be obtained via photoinduced CuAAC click reaction. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1687–1695     

Preparation of star block copolymers with polystyrene‐block‐poly(ethylene oxide) as side chains on hyperbranched polyglycerol core by combination of ATRP with atom transfer nitroxide radical coupling reaction

The star block copolymers with polystyrene‐block‐poly(ethylene oxide) (PS‐b‐PEO) as side chains and hyperbranched polyglycerol (HPG) as core were synthesized by combination of atom transfer radical polymerization (ATRP) with the “atom transfer nitroxide radical coupling” (“ATNRC”) reaction. The multiarm PS with bromide end groups originated from the HPG core (HPG‐g‐(PS‐Br)_n) was synthesized by ATRP first, and the heterofunctional PEO with α‐2,2,6,6‐tetramethylpiperidinyl‐1‐oxy group and ω‐hydroxyl group (TEMPO‐PEO) was prepared by anionic polymerization separately using 4‐hydroxyl‐2,2,6,6‐tetramethylpiperidinyl‐1‐oxy (HTEMPO) as parents compound. Then ATNRC reaction was conducted between the TEMPO groups in PEO and bromide groups in HPG‐g‐(PS‐Br)_n in the presence of CuBr and pentamethyldiethylenetriamine (PMDETA). The obtained star block copolymers and intermediates were characterized by gel permeation chromatography, nuclear magnetic resonance spectroscopy, fourier transform‐infrared in detail. Those results showed that the efficiency of ATNRC in the preparation of multiarm star polymers was satisfactory (>90%) even if the density of coupling cites on HPG was high. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6754–6761, 2008     

Synthesis of AB3‐type miktoarm star polymers with steroid core via a combination of “Click” chemistry and ring opening polymerization techniques

Well‐defined AB₃‐type miktoarm star‐shaped polymers with cholic acid (CA) core were fabricated with a combination of “click” chemistry and ring opening polymerization (ROP) methods. Firstly, azide end‐functional poly(ethylene glycol) (mPEG), poly(methyl methacrylate) (PMMA), polystyrene (PS), and poly(ε‐caprolactone) (PCL) polymers were prepared via controlled polymerization and chemical modification methods. Then, CA moieties containing three OH groups were introduced to these polymers as the end groups via Cu(I)‐catalyzed click reaction between azide end‐functional groups of the polymers ( mPEG‐N₃ , PMMA‐N₃ , PS‐N₃ , and PCL‐N₃ ) and ethynyl‐functional CA under ambient conditions, yielding CA end‐functional polymers ( mPEG‐Cholic , PMMA‐Cholic , PS‐Cholic , and PCL‐Cholic ). Finally, the obtained CA end‐capped polymers were employed as the macroinitiators in the ROP of ε‐caprolactone (ε‐CL) yielding AB₃‐type miktoarm star polymers ( mPEG‐Cholic‐PCL₃ , PMMA‐Cholic‐PCL₃ , and PS‐Cholic‐PCL₃ ) and asymmetric star polymer [ Cholic‐(PCL)₄ ]. The chemical structures of the obtained intermediates and polymers were confirmed via Fourier transform infrared and ¹H nuclear magnetic resonance spectroscopic techniques. Thermal decomposition behaviors and phase transitions were studied in detail using thermogravimetric analysis and differential scanning calorimetry experiments. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3390–3399