Donor–acceptor complexes in copolymerization. XLIX. Cationic polymerization of donor monomers in presence of polar solvents and acrylic monomers. A revised mechanism for polymerization of comonomer complexes

α-Methylstyrene (MS) and isobutyl vinyl ether (VE) readily polymerize, styrene (S) polymerizes to a small extent, and isobutylene (IB), butadiene (BD), and isoprene (IP) fail to polymerize in the presence of catalytic amounts of AlCl₃ when propionitrile, ethyl propionate, and methyl isobutyrate are used as reaction media. MS polymerizes readily and S polymerizes with difficulty in the presence of AlCl₃ to yield homopolymers when acrylonitrile (AN) is present and copolymers with ethyl acrylate (EA) and methyl methacrylate (MMA). VE readily homopolymerizes, while IB, BD, and IP fail to polymerize in the presence of AlCl₃ and the acrylic monomers. VE readily homopolymerizes, S and MS polymerize to a very small extent, and IB, BD, and IP do not polymerize in the presence of ethylaluminum sesquichloride (EASC) in polar solvents. VE readily homopolymerizes in the presence of EASC and the acrylic monomers. MS polymerizes to a small extent in the presence of EASC and the acrylic monomers to yield equimolar copolymers with EA and MMA and a mixture of cationic homopolymer and equimolar copolymer with AN. S yields equimolar copolymers in low yield in the presence of EASC and the acrylic monomers. IB, BD, and IP in the presence of EASC do not polymerize to any significant extent when EA is present, form AN-rich copolymers and yield poly(methyl methacrylate) in the presence of MMA. A revised mechanism is presented for the formation of cationic, radical, random, and alternating copolymers as well as alternating copolymer graft copolymers in the copolymerization of donor and acceptor monomers.     

STUDIES ON THE ~(13)C-NMR SPECTRA OF ALTERNATING COPOLYMERS OF CONJUGATED DIENES WITH METHYL ACRYLATE

The ~(13)C-NMR spectra of alternating copolymers of conjugated dienes, butadiene (BD), isoprene(IP) and chloroprene (CP), with methyl acrylate (MA) were studied. It is proved that they are allalternating copolymers. The BD units in Poly (BD-alt-MA) are joined to MA mainly in the formof trans 1,4-structure. The contents of trans 1,4-, cis 1,4-and 1,2-structure are 88, 7 and 5%, res-pectively. The IP and CP units in Poly(IP-alt-MA) and Poly(CP-alt-MA) exist essentially as trans1,4-configuration and connect with MA units in "head to head" arrangement predominantly, whileCP-CP units present in Poly(CP-alt-MA) in a small quantity.     

Donor-Acceptor Complexes in Copolymerization. XLIV. Copolymerization of Styrene and α-Methylstyrene with Acrylic and α-Substituted Acrylic Esters in the Presence of Aluminum Compounds

Abstract

The copolymerization of styrene (S) with methyl acrylate (MA) and with methyl methacrylate (MMA) in the presence of AlEt₃ yields equimolar, alternating copolymers while no polymer is formed in α-methylstyrene (MS)-MA and MS-MMA systems. In the presence of AlEt_1.5Cl_l,5 (EASC), S-MA and S-MMA yield alternating copolymers, S-methyl a-chloroacrylate (MCA), MS-MA and MS-MMA yield a mixture of alternating and cationic polymers, and MS-MCA yields cationic polymer only. In the presence of A1C1₃, S-MA and MS-MA yield a mixture of alternating and cationic polymers and S-MMA and MS-MMA yield cationic polymer only. The cotacticity distributions of the alternating S-MA and S-MMA copolymers prepared in the presence of AlEt₃, EASC, and A1C1, are the same; the coisotactic, co-heterotactic, and cosyndiotactic fractions being approximately in the ratio 1:2:1. The cosyndiotactic fractions of the alter-nating copolymers prepared in the presence of EASC are in the order MS-MMA > MS-MA > S-MCA > S-MMA=S-MA.     

Donor-Acceptor Complexes in Copolymerization. XXVI. Effect of Solvent,Temperature, and Complexing Agent on the Polymerization of Comonomer Charge Transfer Complexes

The copolymerization of styrene with methyl methacrylate (S/MMA = 4/1) or acrylonitrile (S/AN = 1/1) in the presence of ethylaluminum sesquichloride (EASC) yields 1/1 copolymer in toluene or chlorobenzene. In chloroform the S-MMA-EASC polymerization yields 60/40 copolymer while the S-AN-EASC polymerization yields 1/1 copolymer. In the presence of EASC, styrene-α-chloroacrylonitrile yields 1/1 copolymer (DMF or DMSO), S-AN yields 1/1 copolymer (DMSO) or radical copolymer (DMF), S-MMA yields radical copolymer (DMF or DMSO), α-methylstyrene-AN yields radical copolymer (DMSO) or traces of copolymer (DMF), and α-MS-methacrylo-nitrile yields traces of copolymer (DMSO) or no copolymer (DMF). When zinc chloride is used as complexing agent in DMF or DMSO, none of the monomer pairs undergoes polymerization. However, radical catalyzed polymerization of isoprene-AN-ZnCl₂ in DMF yields 1/1 alternating copolymer. The copolymerization of S/MMA in the presence of EASC yields 1/1 alternating copolymer up to 100°C, while the copolymerization of S/AN deviates from 1/1 alternating copolymer above 50°C. The copolymerization of S/MMA deviates from 1/1 copolymer at MMA/EASC mole ratios above 20 while the copolymerization of S/AN deviates from 1/1 copolymer at MMA/EASC ratios above 50.     

Polymérisation radicalaire du pentadiène-1,3. II. Microstructure des résidus pentadiéniques dans les homo- et copolymères des cis et trans pentadiènes-1,3 avec l'acrylonitrile

The microstructure of diene units was investigated in radical homopolymers of the cis and trans isomers of 1,3-pentadiene and copolymers with acrylonitrile, synthetized in bulk and emulsion. Experiments were carried out by infrared spectroscopy, 100 MHz ¹H-NMR, and 25 MHz ¹³C-NMR studies. No difference between the bulk and emulsion samples was noted. The microstructure of poly(1,3-pentadiene) is practically independent of the cis or trans configuration of the diene monomer and is as follows: 56–59% trans-1,4, 15–17% cis-1,4, 16–20% trans-1,2 7–10% cis-1,2 and 0% 3,4. On the other hand, up to about 30% of incorporated acrylonitrile (10% in the feed), the microstructure of the pentadiene fraction in the copolymers is not affected. This finding suggests that the penultimate unit has very little influence on the polymerization process involving the terminal pentadienly unit. Beyond 10% of acrylonitrile in the feed, the proportions of the structural units were linearly dependent upon the acrylonitrile content: trans-1,4 content increased whereas the amounts of cis-1,4 trans-1,2 and cis-1,2 decreased (except the cis-1,2 fraction, constant in the copolymers from the cis-diene). These results are discussed on the assumption that the microstructure of pentadiene residues is strongly associated with the acrylonitrile comonomer in the feed.     

Synthesis and characterization of polymers of 1,4-hexadienes

The homopolymerization of trans-1,4-hexadiene, cis-1,4-hexadiene, and 5-methyl-1,4-hexadiene was investigated with a variety of catalysts. During polymerization, 1,4-hexadienes undergo concurrent isomerization reactions. The nature and extent of isomerization products are influenced by the monomer structure and polymerization conditions. Nuclear magnetic resonance (NMR) and infrared (IR) data show that poly(trans-1,4-hexadiene) and poly(cis-1,4-hexadiene) prepared with a Et₃Al/α-TiCl₃/hexamethylphosphoric triamide catalyst system consist mainly of 1,2-polymerization units arranged in a regular head-to-tail sequence. A 300-MHz proton NMR spectrum shows that the trans-hexadiene polymer is isotactic; it also may be the case for the cis-hexadiene polymer. These polymers are the first examples of uncrosslinked ozone-resistant rubbers containing pendant unsaturation on alternating carbon atoms of the saturated carbon-carbon backbone. Polymerization of the 1,4-hexadienes was also studied with VOCl₃- and β-TiCl₃-based catalysts. Microstructures of the resulting polymers are quite complicated due to significant loss of unsaturation, in contrast to those obtained with the α-TiCl₃-based catalyst. In agreement with the literature, there was no discernible monomer isomerization with the VOCl₃ catalyst system.     

Determination of coisotacticities of some alternating styrene–acrylic copolymers by NMR spectra

Coisotacticities σ for some alternating copolymers were determined through the analyses of their CH₃O, CH₃ and CH₂ proton NMR spectra; styrene–methyl methacrylate (σ = 0.56), styrene-methyl acrylate (σ = 0.53), styrene–methyl α-chloroacrylate (σ = 0.69), styrene–methacrylonitrile (σ = 0.19), styrene–methacrylamide (σ = 0.16), α-methylstyrene–methyl methacrylate (σ = 0.21), and α-methylstyrene–methyl acrylate (σ = 0.53) were studied. It was found that a terminal model or Bernoullian trial prevails in these complexed copolymerizations with diethylaluminum chloride. The influence of monomer structure on σ values is discussed.     

Localization of Failures in Structural Order of <Emphasis Type="Italic">trans</Emphasis>-1,4-Butadiene Units in Interdefective Regions of a Butadiene-Nitrile Elastomer Matrix

The fractional free volume of chains passing and incorporated into the ordered structures of segments in trans-1,4-configuration in the copolymers of butadiene and acrylonitrile at different content of acrylonitrile units is calculated in order to determine the localization of order disturbances of butadiene trans-1,4-units. Amorphization of the structure occurs in the immediate vicinity of structural defects of acrylonitrilebutadiene rubbers formed by alternating acrylonitrile and trans-1,4-units of butadiene as well as cis-1,4-and 1,2-isomers of butadiene.     

Donor–acceptor complexes in copolymerization. XLIII. Cyclization of alternating and random styrene–(meth)acrylic ester copolymers

Equimolar alternating copolymers of styrene and methyl methacrylate (prepared with Et_1.5AlCl_1.5, SnCl₄, and ZnCl₂) as well as equimolar random copolymer were treated with polyphosphoric acid at 135°C. The extent of cyclization of the alternating copolymers was about 40%, independent of the cotacticity of the copolymer, and there was little or no crosslinking. The random copolymer underwent only 10% cyclization and considerable crosslinking. The extent of cyclization of the alternating copolymer of styrene and methyl acrylate (prepared with Et_1.5AlCl_1.5) was the same as that of the random copolymer and was lower than that of the corresponding methyl methacrylate copolymer. Both alternating and random copolymers underwent extensive crosslinking.     

Alternating copolymer of butadiene and propylene. III

Alternating copolymerizations of butadiene with propylene and other olefins were investigated by using VO(acac)₂–Et₃Al–Et₂AlCl system as catalyst. Butadiene–propylene copolymer with high degree of alternation was prepared with a monomer feed ratio (propylene/butadiene) of 4. Alternating copolymers of butadiene and other terminal olefins such as butene-1, pentene-1, dodecene-1, and octadiene-1,7 were also obtained. However, the butadiene–butene-2 copolymerization did not yield an alternating copolymer but a trans-1,4-polybutadiene.     

Radical copolymerization of sulfur dioxide and chloroprene

The radical copolymerization of sulfur dioxide and chloroprene (CP) in benzene was carried out, especially as a function of the total monomer concentration ([SO₂] + [CP]). The composition of chloroprene polysulfones varies mainly with total monomer concentration and with polymerization temperature, but depends very slightly on feed composition. The microstructure of chloroprene units in chloroprene polysulfone was such that the trans-1,4 unit was predominantly over the cis-1,4 unit. Thus it would seem possible to rule out both radical copolymerization mechanisms, i.e., propagation of separate monomers as explained by the Lewis-Mayo equation, and propagation processes involving a monomer charge-transfer complex.     

Novel cyano-containing copolymers of vinyl esters for piezoelectric materials

The synthesis of a series of novel cyano-containing copolymers is described. Alternating copolymers of acrylonitrile with vinyl esters are obtained by increasing the electrophilic character of the nitrile monomers by complexation with zinc chloride. Copolymers of methyl and ethyl α-cyanoacrylates with vinyl esters are prepared using radical initiators in the presence of 7% acetic acid as inhibitor for anionic polymerization. The copolymers of methyl α-cyanoacrylate with the vinyl esters have T_g's above 140°C. Methyl vinylidene cyanide (MVCN) copolymerizes spontaneously with para-substituted styrenes to yield copolymers with high inherent viscosities and high T_g (160°C) and the copolymer of MVCN with vinyl acetate is also synthesized. The pyroelectric constants p for these polymers were measured and the values of p for the copolymers of vinyl acetate with methyl β,β-dicyanoacrylate, methyl α-cyanoacrylate, or MVCN were in the same range as the well-studied vinylidene cyanide/vinyl acetate copolymer. A higher concentration of dipoles generally results in higher T_g's and higher pyroelectric coefficients. © 1992 John Wiley & Sons, Inc.     

Alternating copolymerization of benzofuran with crotononitrile and α-chloroacrylonitrile

The copolymerizations of benzofuran with α,α- or α,β-disubstituted acrylic monomers were studied. The alternating copolymer of benzofuran and crotononitrile was prepared in the presence of an excess amount of crotononitrile with respect to benzofuran, ethylaluminum dichloride, and azobisisobutyronitrile. The intrinsic viscosity of copolymers was 0.1–0.2 dl/g. Crotononitrile is known to possess a polar carbon–carbon double bond from ¹³C-NMR spectroscopy but the alternating copolymerizability with benzofuran is low. It was found that the order of alternating copolymerizability of acrylic monomers is as follows: This fact may be attributed to the steric hindrance of the β-methyl of crotononitrile. The induced shifts by complexation with ethylaluminum dichloride on ¹³C-NMR spectra of the two isomers of crotononitrile are almost same but the copolymerizability of cis isomer is higher than that of trans isomer. α-Chloroacrylonitrile shows the highest alternating copolymerizability with benzofuran in the presence of weak Lewis acid such as ethoxyaluminum chloride. Alternating copolymerizability of acrylic monomers seems to be in proportion to their e value. The reactivity of cis- and trans-crotononitrile may depend on the nature of a ternary complex composed of aluminum compound, crotononitrile, and benzofuran.     

Preparation and characterization of copolymers of chloroprene and methyl methacrylate

The preparation of chloroprene–methyl methacrylate copolymers in the presence of Lewis acids (Et_1.5AlCl_1.5) in hydrocarbon solvent and the effect of Lewis acids concentration on copolymer composition are described. ¹³C NMR spectra were obtained on these copolymers. In samples of high MMA content, tactic placements of MMA were observed as well as several different kinds of sequences for chloroprene and MMA. In samples of low MMA content, no tactic placements of MMA were found but several different kinds of chloroprene sequences were observed. From the analysis of the ¹³C NMR spectra of the different copolymers examined, it is apparent that all the various kinds of chloroprene sequences in these copolymers can be determined.     

Effect of an anionic emulsifier on the structure of butadiene-nitrile elastomers

X-ray diffraction and TMA studies show that surfactant sodium alkyl sulfonate (C₁₅) forms one of its two LC structures (distinguished by the smallest layer periodicity) in butadiene-nitrile elastomers containing different amounts of acrylonitrile units. In this case, the surfactant serves as a structural plasticizer and facilitates a more complete selective segregation of microblocks of trans-1,4-butadiene units and, especially, of sequences of alternating trans-1,4-butadiene and acrylonitrile units.     

Alternating copolymerization of methyl acrylate with donor monomers having a protected amine group

Attempts were made to copolymerize p-aminostyrene, p-acetamidostyrene, N-methyl-p-aceta-midostyrene, N-(4-vinylphenyl) phthalimide, N-vinyl succinimide, and N-vinyl phthalimide with methyl acrylate complexed with ethyl aluminum sesquichloride. Only reactions involving N-(4-vinylphenyl)phthalimide and N-vinyl phthalimide yielded alternating copolymers. N-vinyl succinimide gave nonalternating copolymers insoluble in common solvents and the other monomers did not copolymerize. In some cases, the conventional radical copolymers were prepared for comparison purposes. The reactivity ratios of the free-radical initiated copolymerization of methyl acrylate (I) with N-(4-vinylphenyl)phthalimide (II) were r₁ = 0.14 and r₂ 1.56. The alternating copolymers were studied by ¹H-NMR and ¹³C-NMR spectroscopy. The alternating copolymer of N-(4-vinylphenyl)phthalimide with methyl acrylate was hydrazinolyzed to form the alternating copolymer of methyl acrylate with p-aminostyrene. Hydrazinolysis of the alternating copolymer of methyl acrylate with N-vinyl phthalimide removed the phthalimide moiety and generated vinyl amine units which readily cyclized with neighboring methyl acrylate units to form copolymers that contained five-membered lactam rings. The infrared (IR) spectra of the hydrazinolyzed products contain bands due to amine or amide groups and are devoid of the characteristic bands of the phthalimide ring.     

Radiation-induced polymerization at high dose rate. IV. Chloroprene in bulk

Bulk polymerization of chloroprene was studied at 25°C in a wide does rate range. Variations of the rate of polymerization (R_p) and molecular weight as a function of does rate were essentially the same as those in several monomers that are capab;e of radical and cationic polymerizations. The polymerization proceeds with radical mechanism at low dose rate ans with radical and cationic mechanism concurrently at high dose rate. The number-average molecular weight of the high-dose-rate was ca. 2400. Microstructure of the polymers was mainly of trans-1,4 unit with small fraction of cis-1,4 and 3,4-vinyl unit. Fractions of the vinyl unit and the inverted unit in trans-1,4 sequence which increased at high does rate inflected the change of dominant mechanism of polymerization.     

The use of α-(aryl)-4-morpholineacetonitriles (masked acyl anion equivalents) in 1,4-additions to α,β-unsaturated esters and nitriles. A versatile synthetic route to 6-aryl-3(2H) pyridazinones

The use of α-(substituted-phenyl)-4-morpholineacetonitriles in 1,4-additions to ethyl acrylate, ethyl crotonate, methyl α-methylacrylate, acrylonitrile, methylacrylonitrile, crotononitrile and cinnamonitrile was studied. A convenient route to 6-aryl-4,5-dihydro-3(2H) pyridazinones from aryl aldehydes and heterocyclic aldehydes was developed.     

Polymerization of complexed monomers. I. Alternating copolymers from cyclopentene and complexed polar monomers

Alternating equimolar copolymers of cyclopentene with acrylonitrile and methyl acrylate were prepared in the presence of ethylaluminum sesquichloride. Varying conditions of monomer ratio, temperature, light, and reaction time were studied. The structures of the polymers and mechanistic implications are discussed.     

Synthesis of difunctional 1,4-dimethyl-1,4-disilacyclohexanes

Transformations of HVinSiCl₂, HVinSi(Me)Cl, HVinSi(Me)Ph, and HVinSi(Me)NEt₂ in the presence of Pt catalyst were studied. In dilute solutions, the reaction gave a mixture of structural and stereoisomers of five- and six-membered disilacyclanes, resulting from intramolecular cyclization of the initially formed linear dimer. In the case of methyl(phenyl)disilacyclane, the structural isomers were separated andtrans-1,4-dimethyl-1,4-diphenyl-1,4-disilacyclohexane was isolated. The reaction of this product with HCl in the presence of AlCl₃ followed by hydrolysis resulted in the synthesis oftrans-1,4-dichloro- andtrans-1,4-dihydroxy-1,4-dimethyl-1,4-disilacyclohexanes. The structures of the structural and stereoisomers synthesized were confirmed by¹H,¹³C, and²⁹Si NMR and IR spectroscopies and mass spectrometry. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1734–1738, September, 1999.