The adsorption of CO,O2, and H2 on Pt(100)-(5×20)

The adsorption/desorption characteristics of CO, O₂, and H₂ on the Pt(100)-(5 × 20) surface were examined using flash desorption spectroscopy. Subsequent to adsorption at 300 K, CO desorbed from the (5×20) surface in three peaks with binding energies of 28, 31.6 and 33 kcal gmol^?1. These states formed differently from those following adsorption on the Pt(100)-(1 × 1) surface, suggesting structural effects on adsorption. Oxygen could be readily adsorbed on the (5×20) surface at temperatures above 500 K and high O₂ fluxes up to coverages of $\text{2}\text{3}$ of a monolayer with a net sticking probability to ssaturation of ? 10^?3. Oxygen adsorption reconstructed the (5 × 20) surface, and several ordered LEED patterns were observed. Upon heating, oxygen desorbed from the surface in two peaks at 676 and 709 K; the lower temperature peak exhibited atrractive lateral interactions evidenced by autocatalytic desorption kinetics. Hydrogen was also found to reconstruct the (5 × 20) surface to the (1 × 1) structure, provided adsorption was performed at 200 K. For all three species, CO, O₂, and H₂, the surface returned to the (5 × 20) structure only after the adsorbates were completely desorbed from the surface.     

The chemisorption of N2 on the (110) surface of iridium

The molecular chemisorption of N₂ on the reconstructed Ir(110)-(1 × 2) surface has been studied with thermal desorption mass spectrometry, XPS, UPS, AES, LEED and the co-adsorption of N₂ with hydrogen. Photoelectron spectroscopy shows molecular levels of N₂ at 8.0 (5σ + 1π) and 11.8 (4σ) eV in the valence band and at 399.2 eV with a satellite at 404.2 eV in the N(1s) region, where the binding energies are referenced to the Ir Fermi level. The kinetics of adsorption and desorption show that both precursor kinetics and interadsorbate interactions are important for this chemisorption system. Adsorption occurs with a constant probability of adsorption of unity up to saturation coverage (4.8 × 10¹⁴ cm^?2), and the thermal desorption spectra give rise to two peaks. The activation energy for desorption varies between 8.5 and 6.0 kcal mole^?1 at low and high coverages, respectively. Results of the co-adsorption of N₂ and hydrogen indicate that adsorbed N₂ resides in the missing-row troughs on the reconstructed surface. Nitrogen is displaced by hydrogen, and the most tightly bound state of hydrogen blocks virtually all N₂ adsorption. A p1g1(2 × 2) LEED pattern is associated with a saturated overlayer of adsorbed N₂ on Ir(110)-(1 × 2).     

Reconstruction of W(110) induced by exposure to NO and by subsequent heat treatment

The (110) face of a tungsten single crystal was found to be partially reconstructed after an exposure, at 300 K, of 300 L of nitric oxide. This surface liberated N₂ when heated to 975 K, after which the reconstruction appeared to have been completed. At this stage a well developed c(11 × 5) LEED pattern was observed and a surface oxide, W₃O₂, is proposed for this reconstructed surface. The above mentioned surface reconstructs again after further heat treatment and is characterised by a weak p(2 × 2) LEED pattern. Work function measurements and the thermal stability of this surface structure indicate that the latter is not the same as that produced by oxygen adsorption on W(110).     

A molecular beam study of the adsorption and desorption of oxygen from a Pt(111) surface

The adsorption and desorption of O₂ on a Pt(111) surface have been studied using molecular beam/surface scattering techniques, in combination with AES and LEED for surface characterization. Dissociative adsorption occurs with an initial sticking probability which decreases from 0.06 at 300 K to 0.025 at 600 K. These results indicate that adsorption occurs through a weakly-held state, which is also supported by a diffuse fraction seen in the angular distribution of scattered O₂ flux. Predominately specular scattering, however, indicates that failure to stick is largely related to failure to accommodate in the molecular adsorption state. Thermal desorption results can be fit by a desorption rate constant with pre-exponential ν_d = 2.4 × 10^?2 cm² s^?1 and activation energy E_D which decreases from 51 to 42 kcal/mole^?1 with increasing coverage. A forward peaking of the angular distribution of desorbing O₂ flux suggests that part of the adsorbed oxygen atoms combine and are ejected from the surface without fully accomodating in the molecular adsorption state. A slight dependance of the dissociative sticking probability upon the angle of beam incidence further supports this contention.     

The adsorption of oxygen on Cu(210)

The system Cu(210)-O₂ has been examined using LEED and AES, combined with optical simulation of diffraction patterns to investigate the detailed structure of the adsorbed layer. Exposure at 300 K and 5 × 10^?9 Torr resulted in LEED patterns showing pronounced streaks. The corresponding structures are believed to require an adsorption mechanism in which O₂ dissociation can occur only at a limited number of surface sites and in which O atoms after dissociation diffuse over quite large distances (?10 nm) before becoming chemisorbed. Heating these structures to 500–600 K produced a sharp (2 × 1) pattern; this step is thought to involve equilibration of the adsorbed layer. Further combinations of exposure (?1 × 10^?6Torr) and heating (up to 500 K) resulted in a series of (2 × 1) and (3 × 1) patterns, while heating to 800 K at any stage of the oxygen interaction regenerated the clean surface.     

Leed,aes and photoemission measurements of epitaxially grown GaAs(001), (111)A and (1̄1̄1̄)B surfaces and their behaviour upon cs adsorption

Epitaxially grown GaAs(001), (111) and (1?1?1?) surfaces and their behaviour on Cs adsorption are studied by LEED, AES and photoemission. Upon heat treatment the clean GaAs(001) surface shows all the structures of the As-stabilized to the Ga-stabilized surface. By careful annealing it is also possible to obtain the As-stabilized surface from the Ga-stabilized surface, which must be due to the diffusion of As from the bulk to the surface. The As-stabilized surface can be recovered from the Ga-stabilized surface by treating the surface at 400°C in an AsH₃ atmosphere. The Cs coverage of all these surfaces is linear with the dosage and shows a sharp breakpoint at 5.3 × 10¹⁴ atoms cm^?2. The photoemission reaches a maximum precisely at the dosage of this break point for the GaAs(001) and GaAs(1?1?1?) surface, whereas for the GaAs(111) surface the maximum in the photoemission is reached at a higher dosage of 6.5 × 10¹⁴ atoms cm^?2. The maximum photoemission from all surfaces is in the order of 50μA Im^?1 for white light (T = 2850 K). LEED measurements show that Cs adsorbs as an amorphous layer on these surfaces at room temperature. Heat treatment of the Cs-activated GaAs (001) surface shows a stability region of 4.7 × 10¹⁴ atoms cm^?2 at 260dgC and one of 2.7 × 10¹⁴ atoms cm^?2 at 340°C without any ordering of the Cs atoms. Heat treatment of the Cs-activated GaAs(111) crystal shows a gradual desorption of Cs up to a coverage of 1 × 10¹⁴ atoms cm^?2, which is stable at 360°C and where LEED shows the formation of the GaAs(111) (√7 × √7)Cs structure. Heat treatment of the Cs-activated GaAs(1?1?1?) crystal shows a stability region at 260°C with a coverage of 3.8 × 10¹⁴ atoms cm^?2 with ordering of the Cs atoms in a GaAs(1?1?1?) (4 × 4)Cs structure and at 340°C a further stability region with a coverage of 1 × 10¹⁴ at cm^?2 with the formation of a GaAs(1?1?1?) (√21 × √21)Cs structure. Possible models of the GaAs(1?1?1?) (4 × 4)Cs, GaAs(1?1?1?)(√21 × √21)Cs and GaAs(111) (√7 × √7)Cs structures are given.     

A LEED and AES study of the structure,debye temperature,and oxidation of the (111) crystal face of thorium

The structure, and reactivity towards O₂ and CO, of the (111) crystal face of a single crystal of high purity thorium metal was studied using low-energy electron diffraction (LEED) and Auger electron spectroscopy (AES). After the sample was cleaned in vacuum by a combination of ion bombardment and annealing, a (1 × 1) LEED pattern characteristic of a (111) surface was obtained. Extended annealing of the cleaned sample at 1000 K produced a new LEED pattern characteristic of a (9 × 9) surface structure. A model of a reconstructed thorium surface is presented that generates the observed LEED pattern. When monolayer amounts of either O₂ or CO were adsorbed onto the crystal surface at 300 K, no ordered surface structures formed. Upon heating the sample following these exposures the (111) surface structure was restored accompanied by a reduction in the amount of surface carbon and oxygen. With continued exposure to either O₂ or CO and annealing, a new LEED pattern developed which was interpreted as resulting from the formation of thorium dioxide. Debye-Walter factor measurements were made by monitoring the intensity of a specularly reflected electron beam and indicated that the Debye temperature of the surface region is less than it is in bulk thorium. Consequently, the mean displacement of thorium atoms from their equilibrium positions was found to increase at the surface of the crystal. The presence of chemisorbed oxygen on the crystal surface affected the Debye temperature, raising it significantly.     

Characterization of oxygen,carbon, and sulfur adlayers on W(211)

Adlayers of oxygen, carbon, and sulfur on W(211) have been characterized by LEED, AES, TPD, and CO adsorption. Oxygen initially adsorbs on the W(211) surface forming p(2 × 1)O and p(1 × 1)O structures. Atomic oxygen is the only desorption product from these surfaces. This initial adsorption selectively inhibits CO dissociation in the CO(β₁) state. Increased oxidation leads to a p(1 × 1)O structure which totally inhibits CO dissociation. Volatile metal oxides desorb from the p(1 × 1)O surface at 1850 K. Oxidation of W(211) at 1200 K leads to reconstruction of the surface and formation of p(1 × n)O LEED patterns, 3 ? n ? 7. The reconstructed surface also inhibits CO dissociation and volatile metal oxides are observed to desorb at 1700 K, as well as at 1850 K. Carburization of the W(211) surface below 1000 K produced no ordered structures. Above 1000 K carburization produces a c(6 × 4)C which is suggested to result from a hexagonal tungsten carbide overlayer. CO dissociation is inhibited on the W(211)?c(6×4)C surface. Sulfur initially orders into a c(2 × 2)S structure on W(211). Increased coverage leads to a c(2×6)S structure and then a complex structure. Adsorbed sulfur reduces CO dissociation on W(211), but even at the highest sulfur coverages CO dissociation was observed. Sulfur was found to desorb as atomic S at 1850 K for sulfur coverages less than $\text{7}\text{6}$ monolayers. At higher sulfur coverages the dimer, S₂, was observed to desorb at 1700 K in addition to atomic sulfur desorption.     

The chemisorption of Co on Rh(111)

The adsorption of CO on Rh(111) has been studied by thermal desorption mass spectrometry and low-energy electron diffraction (LEED). At temperatures below 180 K, CO adsorbs via a mobile precursor mechanism with sticking coefficient near unity. The activation energy for first-order CO desorption is 31.6 kcal/mole (ν_d = 10^13.6s^?1) in the limit of zero coverage.As CO coverage increases, a (√3 ×√3)R30^u overlayer is produced and then destroyed with subsequent formation of an overlayer yielding a (2 × 2) LEED pattern in the full coverage limit. These LEED observations allow the absolute assignment of the full CO coverage as 0.75 CO molecules per surface Rh atom. The limiting LEED behavior suggests that at full CO coverage two CO binding states are present together.     

Room temperature hydrogenation of the Si(001)2 × 1 surface studied by angle-resolved electron energy loss spectroscopy

We observed the hydrogen adsorption on the Si(001)2 × 1 surface achieved at room temperature by angle-resolved electron energy loss spectroscopy (AR-ELS) and elastic low-energy electron diffraction. From measurements of the intensities of elastically diffracted beams, we found a characteristic hydrogen covered surface (called Si(001)2 × 1H(RT) surface in this paper), where all the diffracted beam intensities were enhanced drastically and a sharp 2 × 1 LEED pattern was observed. The angular dependence of the elastically diffracted beams on the 2 × 1H(RT) surface was different from that on the monohydride 2 × 1:H surface. On the 2 × 1H(RT) surface the S₃, transition from the back bond surface state disappeared in contrary to the 2 × 1:H surface and two hydrogen induced transitions were observed at 7.0 and 8.0 eV in AR-ELS spectra. We revealed that the 2 × 1H(RT) surface consisted of the monohydride and the dihydride phases with comparable weights. Additionally, we found the new transition S'₁, ascribed to the newly produced dangling bond surface state due to the rupture of the dimerization bond with hydrogen adsorption.     

Interaction of O2 with Pt(100): I. Equilibrium measurements

Two newly discovered phases on the Pt(100) surface produced by the adsorption of oxygen have been investigated using Rutherford baekscattering (RBS), nuclear microanalysis (NMA), work function changes (Δφ) and LEED. One phase is associated with the oxygensaturated surface (0.63 ± 0.03 monolayers0.81 × 10¹⁵ O atoms cm^?2), where a very complex LEED pattern is observed; the other is observed at an average coverage of 0.44 ± 0.05 monolayers and gives rise to a (3 × 1) LEED pattern (when observed at room temperature). For both surfaces, RBS measurements indicate large (? 0.025 nm) Pt atom displacements. Also discussed is a new method for preparing the “clean” (1 × 1)-Pt(100) surface without the need for NO adsorption/decomposition.     

Cosegregation of tungsten and nitrogen on Fe-9%W-N(100)

Auger electron spectroscopy (AES) and low energy electron diffraction (LEED) have been used to study the cosegregation of tungsten and nitrogen on ferritic Fe-9%W-N(100) single crystals with nitrogen contents ranging from c_N = 11 to 51 wt-ppm. Cosegregation occurs at temperatures T≲600°C depending on the nitrogen content. The thickness of the cosegregated surface layer is estimated by means of Ar⁺ ion depth profiling as being less than two atomic layers. The LEED pattern of the tungsten and nitrogen covered Fe-9%W-51ppmN(100) substrate shows a sharp (1 × 1) structure at a low background intensity indicating epitaxial stabilization of the cosegregated tungsten nitride layer on the bcc (100) surface. The tungsten and nitrogen covered Fe-9%W-11ppmN(100) substrate exhibits a c(2 × 2) structure. On Fe-9%W-51ppmN(100) a temperature-driven phase transition between the cosegregated (1 × 1) and c(2 × 2) surface phases is observed.     

Chemisorption of CO on the unreconstructed Pt(100) surface

The chemisorption of CO on the clean, unreconstructed Pt(100)-1 × 1 surface was investigated by LEED and XPS. Three LEED patterns, c(2 × 2), (√2 × 3√2) R45° and c(4 × 2), were observed with increasing CO exposure and structure models corresponding to these LEED patterns were proposed. The absolute coverage of CO was determined by combining the O(1s) XPS data with coverage information derived from LEED. The maximum CO coverage thus obtained was θ = 0.75 and the initial sticking coefficient was determined to be s₀ = 0.6. This coverage calibration can also be utilized for other oxygen containing molecules by comparing the corresponding O(1s)it peak intensities.     

硫偏析在钼(111)表面上的有序结构

用AES和LEFD在700—800℃温度范围内研究了硫在钼(111)表面上的偏析动力学和表面结构。样品加热到800℃硫迅速地偏析到表面上并逐步地取代了表面上的碳。加热到700℃硫没有明显的表面偏析。硫的偏析主要受它的体扩散速率的控制,表面碳的存在也抑制了硫的表面偏析。不同温度下的偏析动力学实验后,分别进行了低能电子衍射实验,观察到钼(111)(3^1/2×3^1/2)R30°-硫和1/3(⁴⁴_-99)-硫两种表面结构的低能 关键词：     

Adsorption and surface structural chemistry of Na and Na + O2 on Ag(110)

The adsorption of Na and the coadsorption of Na and O₂ on Ag(110) have been studied by LEED, thermal desorption, and Auger spectroscopy. For Na coverages in the regime 0 < θ_Na < 2 the Na desorption spectra show a single peak (β) corresponding to a desorption energy of ～195 kJ mol^?1, and at θ_Na ～ 2 a (1 × 2) LEED pattern appears. At still higher coverages (2 < θ_Na < 5), a (1 × 3) surface phase is formed, and a new peak (α) appears in the desorption spectra; this is identified with Na desorption from an essentially Na surface. The desorption energy of αNa (～174 kJ mol^?1) indicates that Na adatoms beyond the first chemisorbed layer are significantly influenced by the presence of the Ag substrate. The initial sticking probability of O₂ on Na-dosed Ag(110) is enormously enhanced over the clean surface value, being of the order of unity, and O₂ chemisorption ultimately leads to a (4 × 1) surface structure. The presence either subsurface Na alone, or of both Na and O below the surface, causes substantial changes in surface behaviour. In the former case, submonolayer doses of Na lead to the appearance of a (1 × 2) structure; and in the latter case, Na + O₂ coadsorption results in a c(4 × 2) structure. Auger spectroscopy indicates that the Ag(110)-c(4 × 2)$\text{Na}\text{O}$ phase forms with a constant stoichiometry which is independent of the initial Na dose. The Na:O ratio in this adlayer is believed to be of the order of unity. The structures of the various ordered phases, the nature of the AgNa bonding, and the interatomic spacing between the alkali adatoms on Ag(110) are discussed.     

Displacive surface phases formed by hydrogen chemisorption on W {001}

A detailed LEED study is reported of the surface phases stabilised by hydrogen chemisorption on W {001}, over the temperature range 170 to 400 K, correlated with absolute determinations of surface coverages and sticking probabilities. The saturation coverage at 300 K is 19(± 3) × 10¹⁴ atoms cm^?2, corresponding to a surface stoichiometry of WH₂, and the initial sticking probability for both H₂ and D₂ is 0.60 ± 0.03, independent of substrate temperature down to 170 K. Over the range 170 to 300 K six coverage-dependent temperature-independent phases are identified, and the transition coverages determined. As with the clean surface $\text{(}\text{2}\text{×}\text{2}\text{)R45°}$ displacive phase, the c(2 × 2)-H phase is inhibited by the presence of steps and impurities over large distances (～20 Å), again strongly indicative of CDW-PLD mechanisms for the formation of the H-stabilised phases. These phases are significantly more temperature stable than the clean $\text{(}\text{2}\text{×}\text{2}\text{)R45°}$, the most stable being a c(2 × 2)-H split half-order phase which is formed at domain stoichiometries between WH_0.3 and WH_0.5. LEED symmetry analysis, the dependence of half-order intensity and half-width on coverage, and I-V spectra indicate that the c(2 × 2)-H phase is a different displacive structure from that determined by Debe and King for the clean $\text{(}\text{2}\text{×}\text{2}\text{)R45°}$. LEED I-V spectra are consistent with an expansion of the surface-bulk interlayer spacing from 1.48 to 1.51 Å as the hydrogen coverage increases to ～4 × 10¹⁴ atoms cm^?2. The transition from the split half-order to a streaked half-order phase is found to be correlated with changes in a range of other physical properties previously reported for this system. As the surface stoichiometry increases from WH to WH₂ a gradual transition occurs between a phase devoid of long-range order to well-ordered (1 × 1)-H. Displacive structures are proposed for the various phases formed, based on the hypothesis that at any coverage the most stable phase is determined by the gain in stability produced by a combination of chemical bonding to form a local surface complex and electron-phonon coupling to produce a periodic lattice distortion. The sequence of commensurate, incommensurate and disordered structures are consistent with the wealth of data now available for this system. Finally, a simple structural model is suggested for the peak-splitting observed in desorption spectra.     

Composition,structure, surface states,and O2 sticking coefficient for differently prepared GaAs(1&#x0304;1&#x0304;1&#x0304;)As surfaces

The polar GaAs(1&#x0304;1&#x0304;1&#x0304;)As surface can be prepared in three stable and ordered states: two by molecular beam epitaxy (MBE), namely the As-stabilized and the Ga-stabilized states and one simply by ion bombardment and annealing at 770 K. The respective LEED structures are $\text{(2 × 2), (}\text{19}\text{×}\text{19}\text{)}\text{R}\text{23.4°}$, and (1 × 1) with a diffuse faint (3 × 3) superstructure. Auger measurements and the comparison with the stoichiometric cleaved (110) surface show that there are different As concentrations in the first atomic layer associated with each of these three surfaces. Whereas about 10 to 15% of the first As layer appears to be missing on the (2 × 2) surface, about 50% is missing on the $\text{19}$ surface. On the (1 × 1) surface the first As layer is removed completely. The intensity of emission from the surface sensitive states between 1 and 4 eV below the valence band edge, as seen by angular resolved UPS, roughly corresponds to the amount of As at the surface thus confirming their interpretation as As-derived surface states. The inital sticking coefficent for oxygen depends strongly on the surface structure: ～10^?8 for the (2 × 2), ～10^?7 for the $\text{19}$, and ～10^?4 for the (1 × 1) surface. The sticking coefficient does not depend on the surface concentration of As but rather on the degree of saturation of dangling bonds on Ga atoms.     

TDS and LEED studies of H2O adsorption on GaAs(110)

The UHV cleaved (110) face has been exposed to water in the range from 10 L to 2 × 10⁴ L. The main TDS peak in H₂O desorption appears at 350 K, independent of coverage. The low desorption energy of 0.7 eV (16 kcal/mol) is reasonable for oxygen atoms bound via the lone pair orbital to As as was earlier derived from UPS measurements. A broad spur between 450 and 600 K may be related to O-Ga bonds. The sticking probability shows values below 10^-4; only near 4.8 × 10³ L (6 × 10¹⁵ cm^-2 s^-1 H₂O molecules for 300 s) corresponding to a coverage of about 0.4 monolayes a steep maximum appears. At about one monolayer saturation is observed. Exposures to more than 10⁴ L of water quench the intensity of the (10) LEED spot considerably stronger than the intensity of the (11) spot. A comparison of the I(E) curves with existing model calculations suggests that the observed behaviour of the LEED spots is caused by a change in surface structure towards the unrelaxed configuration. The higher sticking coefficient observed near 0.4 monolayers may be connected with this rearrangement of surface atoms.     

Surface structure of γ-Fe2O3(111)

The surface structure of γ-Fe₂O₃(111) has been investigated with a range of surface techniques. Two different surface structures were discovered depending upon surface preparation techniques. Sputtering followed by annealing in vacuum produced a reduced surface characterised by a (2 × 2) LEED pattern, whereas sputtering followed by annealing in 1 × 10^? 6 mbar oxygen produced a surface characterised by a (√3 × √3)-R30° LEED pattern. The latter appears to be a very low conductivity surface, whereas the former has the band gap expected for maghemite (~ 2.0 eV). We propose that the reduced surface is a magnetite-like layer, whereas the oxidised surface is an Fe₂O₃-like layer.     

Low energy electron diffraction and electron spectroscopy studies of the clean (110) and (100) titanium dioxide (rutile) crystal surfaces

Low-energy electron diffraction (LEED), Auger electron spectroscopy (AES), electron energy loss (ELS) and ultraviolet photoemission spectroscopies (UPS) were used to study the structures, compositions and electron state distributions of clean single crystal faces of titanium dioxide (rutile). LEED showed that both the (110) and (100) surfaces are stable, the latter giving rise to three distinct surface structures, viz. (1 × 3), (1 × 5) and (1 × 7) that were obtained by annealing an argon ion-bombarded (100) surface at ~600,800 and 1200° C respectively. AES showed the decrease of the $\text{O(510 eV)}\text{Ti(380 eV)}$ peak ratio from ~1.7 to ~1.3 in going from the (1 × 3) to the (1 × 7) surface structure. Electron energy loss spectra obtained from the (110) and (100)?(1 × 3) surfaces are similar, with surface-sensitive transitions at 8.2, 5.2 and 2.4 eV. The energy loss spectrum from an argon or oxygen ion bombarded surface is dominated by the transition at 1.6 eV. UPS indicated that the initial state for this ELS transition is peaked at ?0.6 eV (referred to the Fermi level E_F in the photoemission spectrum, and that the 2.4 eV surface-sensitive ELS transition probably arises from the band of occupied states between the bulk valence band maximum to the Fermi level. High energy electron beams (1.6 keV 20 μA) used in AES were found to disorder clean and initially well-ordered TiO₂ surfaces. Argon ion bombardment of clean ordered TiO₂ (110) and (100)?(1 × 3) surfaces caused the work function and surface band bending to decrease by almost 1 eV and such decrease is explained as due to the loss of oxygen from the surface.