Self-assembled monolayers of electroactive polychlorotriphenylmethyl radicals on Au(111)

Two new polychlorotriphenylmethyl (PTM) derivatives bearing a thioacetate and a disulfide group have been synthesized to anchor on gold substrate. On the basis of these molecules, three strategies were followed to prepare self-assembled monolayers (SAMs) of electroactive PTMs. The resulting SAMs were fully characterized by contact angle, atomic force microscopy (AFM), and time-of-flight secondary ion mass spectroscopy (ToF-SIMS). The high coverage surface and stability of the SAMs were demonstrated by cyclic voltammetry. In addition, the electrochemical experiments proved that these SAMs are bistable since it is possible to reversibly switch between the PTM radical state to the corresponding anion. The magnetic response was investigated by electron paramagnetic resonance. We observed that when the PTM SAMs are in their radical form they confer magnetic functionality to the surface, whereas when they are in the anionic state, the surface is diamagnetic. Thus, the PTM-modified substrates are multifunctional surfaces since they combine magnetic and electroactive properties. The reported results show the high potential of these materials for the fabrication of surface molecular devices.     

Bio-functionalization of monodisperse magnetic nanoparticles and their use as biomolecular labels in a magnetic tunnel junction based sensor

Monodisperse magnetic nanoparticles (NPs) could enable the ultra-sensitive magnetic detection of biological analytes. However, rendering these particles biocompatible has remained a challenge. We report the bio-functionalization and detection of 12-nm manganese ferrite NPs. We have achieved the site-specific binding of biotin-functionalized NPs onto avidin-patterned silicon oxide substrates and DNA-functionalized NPs onto complementary DNA-patterned silicon oxide substrates. Utilizing scanning SQUID microscopy, we show that these substrate-bound NPs retain their magnetic properties. Finally, we demonstrate a novel method of detecting either protein binding or DNA hybridization at room temperature using the NPs and a magnetic tunnel-junction-based biosensor situated in orthogonal magnetic fields.     

Octadecyltrichlorosilane (OTS): a resist for OMCVD gold nanoparticle growth

One application of octadecyltrichlorosilane (OTS) self‐assembled monolayers (SAMs) is its use as thin film resists. In this work, we demonstrated that OTS SAMs can be reliable resists for organo‐metallic chemical vapor deposition (OMCVD) grown gold nanoparticles (Au NPs). In optical sensing applications based on Au NPs, one candidate system consists of patterned OTS SAMs and precisely grown OMCVD Au NPs for achieving a high sensitivity. As an initial step, the OTS SAMs need to perfectly resist the OMCVD Au NP growth. Hence the optimized formation of the OTS SAMs affected by different assembly times and baking temperatures was studied by contact angle, ellipsometry, XPS, SEM, and atomic force microscopy (AFM). To demonstrate the ability of the OTS SAMs to resist OMCVD Au NP growth, the OMCVD process was carried out on two sets of samples: OTS SAMs fabricated under optimized conditions on one set and the other set without OTS SAMs. High‐resolution XPS, RBS, SEM, and ultraviolet‐visible (UV‐Vis) spectroscopy were applied to study the growth of Au NPs on the samples with and without OTS SAM resists. Copyright © 2009 John Wiley & Sons, Ltd.     

New dialkyldithiophosphinic acid self-assembled monolayers (SAMs): influence of gold substrate morphology on adsorbate binding and SAM structure

We report the fabrication and characterization of new self-assembled monolayers (SAMs) formed from dihexadecyldithiophosphinic acid [(C(16))(2)DTPA] molecules on gold substrates. In these SAMs, the ability of the (C(16))(2)DTPA headgroup to chelate to the gold surface depends on the morphology of the gold substrate. Gold substrates fabricated by electron-beam evaporation (As-Dep gold) consist of ～50-nm grains separated by deep grain boundaries (～10 nm). These grain boundaries inhibit the chelation of (C(16))(2)DTPA adsorbates to the surface, producing SAMs in which there is a mixture of monodentate and bidentate adsorbates. In contrast, gold substrates produced by template stripping (TS gold) consist of larger grains (～200-500 nm) with shallower grain boundaries (<2 nm). On these substrates, the low density of shallow grain boundaries allows (C(16))(2)DTPA molecules to chelate to the surface, producing SAMs in which all molecules are bidentate. The content of bidentate adsorbates in (C(16))(2)DTPA SAMs formed on As-Dep and TS gold substrates strongly affects the SAM properties: Alkyl chain organization, wettability, frictional response, barrier properties, thickness, and thermal stability all depend on whether a SAM has been formed on As-Dep or TS gold. This study demonstrates that substrate morphology has an important influence on the structure of SAMs formed from these chelating adsorbates.     

纳米粒子的精准组装

纳米材料由于其独特的光、电、磁、力学等性质,成为了构建功能材料与器件的理想基元。实现纳米粒子的精确组装,是探究粒子之间的耦合聚集性质和制备宏观功能器件的基础。但是由于纳米粒子的小尺寸以及在溶液中运动的随机性与复杂性,精准控制纳米粒子组装体的形貌以及在空间中的相对位置仍存在巨大挑战。为了将纳米粒子组装成理想的有序结构,许多控制粒子组装的策略与方法得到发展。本文首先概述了纳米粒子自组装的控制方法与典型形貌,着重分析了影响粒子精准排布的因素与控制方法,并对纳米粒子及其组装体的光学性质与器件应用的最新研究进展进行了讨论,最后对目前纳米粒子精准组装所面临的挑战以及未来发展的方向进行了展望。     

Manifestation of strong magneto-electric dipolar coupling in ferromagnetic nanoparticles−FLC composite: evaluation of time-dependent memory effect

Rod-shaped 5 wt.% copper-doped ZnO (ZnO:Cu²⁺) ferromagnetic nanoparticles (NPs), prepared by hydrothermal method, were dispersed in ferroelectric liquid crystal (FLC) named Felix 17/100. The effect of ferromagnetic NPs on the physical properties of FLC material (Felix 17/100) has been investigated by dielectric, electro-optical and polarising optical microscopic methods. A noteworthy time-dependent memory has been observed in the NPs-dispersed FLC composite attributed to the coupling of magnetic field associated to NPs with the director orientation of FLC. Improvement in spontaneous polarisation and dielectric susceptibility of FLC material has been ensued with the addition of ferromagnetic NPs. Faster electro-optic response, at lower applied voltage, has also been observed in NPs-dispersed FLC composite. These changes are accredited to the magneto-electric dipolar coupling existing due to the interactions between magnetic-dipole and electric-dipole moments of magnetic NPs and FLC material, respectively. The formation of periodic domains capable to show memory effect has been observed in composite. The observed time-dependent memory was confirmed by dielectric and electro-optical methods. FLC material enriched with the properties of ferromagnetic NPs can be utilised in advanced multifunctional optical devices, time-dependent memory-based security devices and computational purposes.     

Fabrication of self-assembled monolayers (SAMs) and inorganic micropattern on flexible polymer substrate

By grafting (aminopropyl)triethoxysilane (APTES) as the buffer layer on poly(ethylene terephthalate) (PET) surface, the SAMs ofoctadecyltrichlorosilane (OTS), phenyltrichlorosilane (PTCS), vinyltrichlorosilane (VTCS), andp-tolyltrichlorosilane (TTCS) were fabricated on the flexible polymer substrate. The properties of SAMs were accurately controlled by adjusting the immersing time of substrates in the solutions and the concentration of the solutions. The SAMs acted as templates, and TiO2 micropattern was successfully deposited on OTS, TTCS, and PTCS SAMs.     

Electrochemically controlled assembly and logic gates operations of gold nanoparticle arrays

The reversible assembly of β-cyclodextrin-functionalized gold NPs (β-CD Au NPs) is studied on mixed self-assembled monolayer (SAM), formed by coadsorption of redox-active ferrocenylalkylthiols and n-alkanethiols on gold surfaces. The surface coverage and spatial distribution of the β-CD Au NPs monolayer on the gold substrate are tuned by the self-assembled monolayer composition. The binding and release of β-CD Au NPs to and from the SAMs modified surface are followed by surface plasmon resonance (SPR) spectroscopy. The redox state of the tethered ferrocene in binary SAMs controls the formation of the supramolecular interaction between ferrocene moieties and β-CD-capped Au NPs. As a result, the potential-induced uptake and release of β-CD Au NPs to and from the surface is accomplished. The competitive binding of β-CD Au NPs with guest molecules in solution shifted the equilibrium of the complexation-decomplexation process involving the supramolecular interaction with the Fc-functionalized surface. The dual controlled assembly of β-CD Au NPs on the surface enabled to use two stimuli as inputs for logic gate activation; the coupling between the localized surface plasmon, associated with the Au NP, and the surface plasmon wave, associated with the thin metal surface, is implemented as readout signal for "AND" logic gate operations.     

Precise modulation of spatially distributed inorganic nanoparticles in block copolymers-based self-assemblies with diverse morphologies

Block copolymers (BCPs)-based self-assemblies with various morphological and compartmental structures can serve as universal polymeric scaffolds for the incorporation of diverse inorganic nanoparticles (NPs) within the disparate polymer domains of the formed aggregates. The properties and performance of the resulting BCPs–NPs hybrids depend not only on the organic and inorganic building moieties, but also on the spatial distribution of inorganic NPs within organic aggregates. However, few publications have so far made a systematical clarification of the effect of the critical parameters on the morphological control of BCPs–NPs hybrids and the spatial localization of NPs within the BCPs-based aggregates as well as their properties for potential applications. For this purpose, we summarized the co-operative assembly of BCPs and NPs in solution and emulsion with an emphasis on the precisely modulated localization of NPs in different domains of BCP aggregates with various morphologies. Specifically, we made detailed discussion on the effect of size, shape and surface property of NPs on the loading number and selective localization of NPs within BCP aggregates. The important guidelines drawn herein on the precise modulation of spatially distributed NPs in BCP aggregates are believed to inspire the generation of more novel hybrid materials for various applications.     

A multiscale structural study of nanoparticle films prepared by the Langmuir–Blodgett technique

Arrays of magnetic nanoparticles (NPs) represent a very interesting challenge toward the development of new devices for magnetic applications such as data storage and spintronic. The final properties of such assemblies depending essentially on the spatial arrangement of NPs, it is of first importance to investigate precisely their structure. Here, the structure of monolayer and multilayer films of magnetic iron oxide NPs assembled by the Langmuir–Blodgett (LB) technique has been studied by usual techniques such as SEM, AFM and ellipsometry and by a new and an easy to process enhanced optical technique: the Surface Enhancement Ellipsometry Contrast (SEEC) microscopy. This technique is based on the use of a new generation of microscope slides used as substrates which allow the strong enhancement of the sample contrast to a point where it becomes possible to visualize the structure of monolayer and multilayer films at the nanoscale with a conventional optical microscope. The SEEC microscopy is demonstrated to be complementary to usual characterization techniques to study the structure of NPs films, especially for films containing very small nanosized NPs which are more difficult to analyze by usual techniques. While the film structure is investigated with lateral resolution of microns, the layer thickness is analyzed at the nanoscale (with a precision of 0.3 nm) with a close fit to the experimental measurements on local (AFM) and on larger (ellipsometry) areas. This technique presents the advantage to visualize directly the topography of NPs assemblies on very large areas by extracting information such as the height profile, the film roughness and generating 3D images.     

Surface enhanced Raman scattering of p-aminothiophenol self-assembled monolayers in sandwich structure fabricated on glass

A sandwich structure consisting of Ag nanoparticles (NPs), p-aminothiophenol (p-ATP) self-assembled monolayers (SAMs), and Ag NPs was fabricated on glass and characterized by surface enhanced Raman scattering (SERS). The SERS spectrum of a p-ATP SAM in such sandwich structure shows that the electromagnetic enhancement is greater than that on Ag NPs assembled on glass. The obtained enhancement factors (EF) on solely one sandwich structure were as large as 6.0 +/- 0.62 x 10(4) and 1.2 +/- 0.62 x 10(7) for the 7a and 3b(b(2)) vibration modes, respectively. The large enhancement effect of p-ATP SAMs is likely a result of plasmon coupling between the two layers of Ag NP (localized surface plasmon) resonance, creating a large localized electromagnetic field at their interface, where p-ATP resides. Moreover, the fact that large EF values (approximately 1.9 +/- 0.7 x 10(4) and 9.4 +/- 0.7 x 10(6) for the 7a- and b(2)-type vibration modes, respectively) were also obtained on a single sandwich structure of Au NPsp-ATP SAMsAg NPs in the visible demonstrates that the electromagnetic coupling does not exist only between Ag NPs but also between Au and Ag NPs. The lower EF values on Au-to-Ag NPs compared to those on Ag-to-Ag NPs demonstrate that the Au-to-Ag coupling must be less effective than the Ag-to-Ag coupling for the induction of SERS in the visible.     

Directed, selective insertion of single molecules into patterned self-assembled monolayers of alkanethiols with different chain lengths

Pd(ii) pincer adsorbate molecules (1) were inserted into self-assembled monolayers (SAMs) of alkanethiols with different chain lengths (C(8) to C(18)) on annealed gold substrates. Their presence was brought to expression by reaction of with Au nanoclusters bearing phosphine moieties (2). The surface-confined Au nanoclusters were observed only on the shorter chain SAMs (C(8)SH to C(16)SH) and not on C(18)SH SAMs. This is attributed to the longer chain length of C(18)SH preventing the insertion of pincer molecules. Microcontact printing (microCP) with C(18)SH on unannealed gold substrates and the subsequent immersion of the substrates into C(8)SH, C(10)SH, C(12)SH, or C(16)SH solutions, yielded a series of patterned SAMs that have areas of thiols of different chain lengths. Insertion of 1 followed by expression using 2, or insertion of 3 showed inserted molecules only in the shorter chain SAM areas. The absolute particle densities in the former case were higher than on the corresponding homogeneous SAMs on annealed substrates, probably due to larger numbers of defects in the SAMs on unannealed substrates.     

Competition as a design concept: polymorphism in self-assembled monolayers of biphenyl-based thiols

Self-assembled monolayers (SAMs) of two omega-(4'-methylbiphenyl-4-yl)alkanethiols (CH(3)(C(6)H(4))(2)(CH(2))(n)SH, BPn, n = 4, 6) on Au(111) substrates, prepared from solution at room temperature and subsequently annealed at temperatures up to 493 K under a nitrogen atmosphere, were studied using scanning tunneling microscopy (STM), high-resolution X-ray photoelectron spectroscopy (HRXPS), and near-edge X-ray absorption fine structure spectroscopy (NEXAFS). In striking contrast to BPn SAMs with n = odd, for which only one phase is observed, the even-numbered BPn SAMs exhibit polymorphism. Irreversible phase transitions occur which involve three phases differing substantially in density and stability. Upon annealing, BP4 and BP6 transform into a beta-phase, which is characterized by an exceptionally high structural quality with virtually defect-free domains exceeding 500 nm in diameter. Exchange experiments, monitored by contact angle measurement, reveal that the beta-phase exhibits a dramatically improved stability. The fundamental differences in the phase behavior of even- and odd-numbered BPn SAMs are discussed in terms of two design strategies based on cooperative and competitive effects.     

Effect of the phase states of self-assembled monolayers on pentacene growth and thin-film transistor characteristics

To investigate the effects of the phase state (ordered or disordered) of self-assembled monolayers (SAMs) on the growth mode of pentacene films and the performance of organic thin-film transistors (OTFTs), we deposited pentacene molecules on SAMs of octadecyltrichlorosilane (ODTS) with different alkyl-chain orientations at various substrate temperatures (30, 60, and 90 degrees C). We found that the SAM phase state played an important role in both cases. Pentacene films grown on relatively highly ordered SAMs were found to have a higher crystallinity and a better interconnectivity between the pentacene domains, which directly serves to enhance the field-effect mobility, than those grown on disordered SAMs. Furthermore, the differences in crystallinity and field-effect mobility between pentacene films grown on ordered and disordered substrates increased with increasing substrate temperature. These results can be possibly explained by (1) a quasi-epitaxy growth of the pentacene film on the ordered ODTS monolayer and (2) the temperature-dependent alkyl chain mobility of the ODTS monolayers.     

Comparison of the anchoring of nematic liquid crystals on self-assembled monolayers formed from semifluorinated thiols and alkanethiols

The anchoring of nematic liquid crystals on self-assembled monolayers (SAMs) formed by the chemisorption of semifluorinated thiols or alkanethiols on gold is compared and contrasted. The planar anchoring of 4-n-pentyl-4-cyanobiphenyl (5CB) observed in the past on SAMs formed from alkanethiols is also observed on SAMs formed from semifluorinated thiols. The azimuthal anchoring of 5CB, however, differs on these two types of surfaces: nematic 5CB anchored on SAMs formed from alkanethiols has a grainy appearance due to the formation of domains with sizes 10 mum whereas 5CB forms large domains ( 100 mum) with diffuse branches emerging from defects of strength 1/2 when anchored on SAMs formed from semifluorinated thiols. Mixed (two-component) SAMs formed from either short and long semifluorinated thiols or short and long alkanethiols cause homeotropic anchoring of 5CB. We discuss these results in light of the known differences in the structure of SAMs formed from alkanethiols and semifluorinated thiols, i.e. the tilt of the chains and conformational freedom (flexibility) of the chains within these SAMs.     

Molecular junctions based on SAMs of cruciform oligo(phenylene ethynylene)s

Cruciform oligo(phenylene ethynylene)s (OPEs) with an extended tetrathiafulvalene (TTF) donor moiety (OPE5-TTF and OPE3-TTF) and their simple analogues (OPE5-S and OPE3) without conjugated substituents were used to form high-quality self-assembled monolayers (SAMs) on ultraflat gold substrates. Molecular junctions based on these SAMs were investigated using conducting-probe atomic force microscopy (CP-AFM). The TTF substituent changes the molecular orbital energy levels and decreases the HOMO-LUMO energy gap, resulting in a 9-fold increase in conductance for both TTF cruciform OPEs compared to the unsubstituted analogues. The difference in electrical transport properties of the SAMs was reproduced by the theoretical transport calculations for the single molecules.     

Carboxybetaine methacrylate polymers offer robust, long-term protection against cell adhesion

Films of poly(carboxybetaine methacrylate), poly(CBMA), grafted onto microetched gold slides are effective in preventing nonspecific adhesion of cells of different types. The degree of adhesion resistance is comparable to that achieved with the self-assembled monolayers, SAMs, of oligo(ethylene glycol) alkanethiolates. In sharp contrast to the SAMs, however, substrates protected with poly(CBMA) can be stored in dry state without losing their protective properties for periods up to 2 weeks.     

Formation of ordered self-assembled monolayers by adsorption of octylthiocyanates on Au(111)

Self-assembled monolayers (SAMs) were formed by the spontaneous adsorption of octythiocyanate (OTC) on Au(111) using both solution and ambient-pressure vapor deposition methods at room temperature and 50 degrees C. The surface structures and adsorption characteristics of the OTC SAMs on Au(111) were characterized by scanning tunneling microscopy (STM) and X-ray photoelectron spectroscopy (XPS). The STM observation showed that OTC SAMs formed in solution at room temperature have unique surface structures including the formation of ordered and disordered domains, vacancy islands, and structural defects. Moreover, we revealed for the first time that the adsorption of OTC on Au(111) in solution at 50 degrees C led to the formation of SAMs containing small ordered domains, whereas the SAMs formed by vapor deposition at 50 degrees C had long-range ordered domains, which can be described as (radical3 x 2 radical19)R5 degrees structures. XPS measurements of the peaks in the S 2p and N 1s regions for the OTC SAMs showed that vapor deposition is the more effective method as compared to solution deposition for obtaining high-quality SAMs by adsorption of OTC on gold. The results obtained will be very useful in understanding the SAM formation of organic thiocyanates on gold surfaces.     

Self-assembled monolayers of alkaneselenolates on (111) gold and silver

Self-assembled monolayers (SAMs) formed from didodecyl diselenide (C12SeSeC12) and didodecyl selenide (C12SeC12) on (111) Au and Ag substrates were extensively characterized by several complementary techniques. C12SeSeC12 was found to form contamination-free, densely packed, and well-ordered C12Se SAMs on both substrates, whereas the adsorption of C12SeC12 occurred only on Au and resulted in the formation of a SAM-like C12SeC12 film with a low packing density and a conformational disorder. The properties of the C12Se SAMs were compared with those of dodecanethiolate (C12S) SAMs. The packing density, orientational order, and molecular inclination in C12Se/Au and C12S/Au were found to be very similar. In contrast, C12Se/Ag exhibited significantly lower packing density, a lower degree of the conformational and orientational order, and a larger molecular inclination than C12S/Ag. The results suggest a sp3 bonding configuration for the selenium atom on Au and Ag and indicate a larger corrugation of the headgroup-substrate binding energy surface in C12Se/Ag than in C12S/Ag.     

金电极表面上硫醇自组装的影响因素研究进展

本文综述了金表面上硫醇自组装的影响因素研究进展,包含表面预处理、电位控制、外加超声、微波和磁场、金属离子欠电位沉积和组装方式等几个方面。通过金表面上硫醇自组装影响因素的总结探讨,对硫醇单层的快速可控与重现构建具有重要的指导意义。