Synthesis,Characterization and Thermophysical Properties of Three Neoteric Solvents-Ionic Liquids Based on Choline Chloride

The authors prepared,characterized and preliminary studied the properties of some neoteric solvents-ionic liquids based on choline chloride,i.e.,three ionic liquids based on the eutectics of choline chloride（2-hydroxyN,N,N-trimethylethanaminium chloride） with,respectively,urea,malonic acid and citric acid.The obtained mixtures were clear and colorless ionic liquids at room temperature.The thermophysical properties,namely,density,viscosity,and electrical conductivity of these mixtures were investigated as a function of temperature within a range of 298-353 K.Correlations for the temperature dependence of the measured properties were generated and discussed in terms of Arrhenius theory.Finally the electrochemical windows of the eutectic liquids were determined.     

The Synthesis of 2, 4, 6-Triisopropyl-1, 3, 5-trioxane Catalyzed by Ionic Liquids

The synthesis of 2, 4, 6-triisopropyl- 1, 3, 5-trioxane with high yield and desirable selectivity from solvent-free cyclotrimerization of isobutyraldehyde catalyzed by ionic liquids was reported in this work.     

Bronsted Acidic Ionic Liquids as Efficient Catalysts and Mediums for the Synthesis of Half-esters:Structure-catalytic Selectivity Relationship

Bronsted acidic ionic liquids based on imidazolium cation were employed as efficient catalysts and mediums for the ring opening of phthalic anhydride to synthesize half-esters. Good yields, short reaction time and mild reaction condition were achieved. Lower acidity of ionic liquid resulted in higher catalytic selectivity in the synthesis of half-esters. The minimum-energy geometries of sulfonic acid-functionalized ionic liquids based on imidazolium cation revealed that their acidities and catalytic selectivity in the synthesis of half-esters were related to their structures.     

BrФnsted Acidic Ionic Liquids as Efficient Catalysts and Mediums for the Synthesis of Half-esters: Structure-catalytic Selectivity Relationship

BrФnsted acidic ionic liquids based on imidazolium cation were employed as efficient catalysts and mediums for the ring opening of phthalic anhydride to synthesize half-esters. Good yields, short reaction time and mild reaction condition were achieved. Lower acidity of ionic liquid resulted in higher catalytic selectivity in the synthesis of half-esters. The minimum-energy geometries of sulfonic acid-functionalized ionic liquids based on imidazolium cation revealed that their acidities and catalytic selectivity in the synthesis of half-esters were related to their structures.     

DABCO-based ionic liquids:Green and efficient catalysts with a dual catalytic role for aza-Michael addition

Four recoverable and reusable ionic liquids based on 1,4-diazobicyclo[2.2.2]octane(DABCO) have been synthesized to catalyze the aza-Michael addition of secondary amines to a,b-unsaturated compounds.Among the catalysts tested,[DABCO-PDO][OAc] was found to be most suitable for the reaction of a wide range of cyclic substrates without any solvent at room temperature,and afford the products in good to excellent yields within an appropriate amount of time.The proposed mechanism for the dual activation of the catalyst was supported by experimental results as well as the DFT calculation.In addition,the ionic liquids used can be regenerated and recycled several times without any loss of activity.     

Synthesis of 3－（1－Cyclohexenyl）－2－butanone via Environmentally Friendly Catalysts

We substituted several environmentally friendly catalysts which included HY and H-β zeolites, various cation-exchanged β zeolites, and solid-supported ferric chloride for conventional catalysts for the synthesis of 3-(1-cyclohexenyl)-2-butanone from the reaction of ethylidenecyclohexane with acetic anhydride at room temperature. HY zeolite was found to be the most effective for this reaction, and gave the acYlated product in a 72% yield under the conditions of n(ethylidenecyclohexane)/n(acetic anhydride)/m(HY zeolite)= 1 mmol/10 mmol/0. 100 g, reaction temperature 25 ℃ and reaction time 2 h. The used HY zeolite can be recovered, regenerated and gave almost the same yield as the fresh one. The lifetime of the HY zeolite is over 80 h. The effect of different factors on the reaction has also been investigated.     

The alcoholysis of acetonitrile prompted by BrФrnsted acidic ionic liquid [HSO3-pmim]HSO4

BrФnsted acidic ionic liquids based on imidazolium cation were employed as a series of environmentally benign catalysts and mediums in the alcoholysis of acetonitrile to synthesize ester. The results showed that BrФnsted acidic ionic liquid [HSO3- pmim]HSO4 was an efficient catalyst and medium for the alcoholysis of acetonitrile which could be recycled easily without obvious decline in catalytic activity, the highest yield could reach 85%.     

Ionic liquid mediated CO2 activation for DMC synthesis

Promoted catalytic reaction between methanol and CO2 for dimethyl carbonate(DMC) synthesis is conducted over K2CO3/CH3 I catalyst in the presence of ionic liquid under microwave irradiation.The effect of ionic liquids incorporated with microwave irradiation on the yield of DMC is investigated.DMC was found to form at lower temperature in a relative short time,which indicated an enhanced catalytic process by ionic liquid.Among the ionic liquids used,1-butyl-3-methylimidazolium chloride is the most effective promoter.Density functional theory calculations indicate that CO2 bond lengths and angles changed due to the molecular interaction of ionic liquid and CO2,resulting in the activation of CO2 molecules and consequently the acceleration of reaction rate.     

SYNTHESIS OF FUNCTIONAL MACROMOLECULE INTERMEDIATE THROUGH ACYLATION CATALYZED BY [Emim]Cl-AlCl3 IONIC LIQUID

Acylation reaction of anthracene with oxalyl chloride in the presence of [Emim]Cl-AlCl3 ionic liquid has been investigated. Pure 1,2-aceanthryenedione, which is used as intermediate of functional aromatic polymer material, was obtained by recrystalling the reaction mixture with aether and was determined by GC/MS, 1↑HNMR and FTIR analysis. The influences of various parameters, such as the contents of AlCl3 in [Emim]Cl-AlCl3, the amount of acylation agent, amount of [Emim]Cl-AlCl3, reaction temperature and reaction time were investigated. The optimum conditions were as follows： the molar fraction of AlCl3 in ionic liquid [x（AlCl3）] being 0.67, molar ratio of ionic liquid to anthracene being 2：1, molar ratio of oxalyl chloride to anthracene being 2：1, reaction temperature being 40℃ and reaction time being 6h. Under above conditions, the yield and selectivity of 1,2-aceanthrylenedione can reach 91.5% and 98.3% respectively. Further more, [Emim]Cl-AlCl3 ionic liquid, compared with metal halides such as AlCl3, was found to catalyze the reaction as a novel environmental friendly catalyst and solvent and can be reused.     

The alcoholysis of acetonitrile prompted by Brфnsted acidic ionic liquid [HSO_3-pmim]HSO_4

Br(?)nsted acidic ionic liquids based on imidazolium cation were employed as a series of environmentally benign catalysts and mediums in the alcoholysis of acetonitrile to synthesize ester.The results showed that Br(?)nsted acidic ionic liquid [HSO_3- pmim]HSO_4 was an efficient catalyst and medium for the alcoholysis of acetonitrile which could be recycled easily without obvious decline in catalytic activity,the highest yield could reach 85%.     

Deoximation Reaction in Room Temperature Ionic Liquids under Mild Conditions

Deoximation in metal chloride ionic liquids based on 1‐alkyl‐3‐methylimidazolium and triethylene ammonium cations, such as AmimBr(Cl)‐MCl_x(A=ethyl, butyl, benzyl; M=Al, Fe, Cu, Sn and Zn; x=2, 3) and Et₃NHCl‐FeCl₃ were investigated under mild conditions. Ferrate chloride ionic liquid was proved to be an effective catalyst for deoximation of cyclohexanone oxime, exhibiting high conversion of oximes and selectivity to cyclohexanone. Good performance for the deoximation of other oximes such as salicylald oxime, acetone oxime, benzophenone oxime, 4‐nitrobenzald oxime, acetophenone oxime, 2‐chlorobenzaldehyde oxime, Acetald oxime, 2‐butanone oxime and (1R)‐camphor oxime was also achieved with bmimBr‐FeCl₃ as catalyst and solvent. The deoximation was determined to carry out via acid‐catalytic hydrolysis and the reaction mechanism was proposed.     

用离子液体催化合成2,4,6-三异丁基-1,3,5-三氧噁烷

在[bm in]C l/FeC l3离子液体中由异戊醛合成2,4,6-三异丁基-1,3,5-三氧噁烷,转化率76%,选择性95%。优化反应条件为:异戊醛25 g,[bm in]C l/FeC l3[x(FeC l3)=0.67]2 g,室温反应1 h,离子液体能重复使用5次。     

Influence of FeCl3‐modified chloroaluminate ionic liquids on long‐chain alkenes alkylation

The influence of anhydrous ferric chloride on the catalytic properties of chloroaluminate ionic liquids catalyst for Friedel–Crafts alkylation was investigated. The catalysts were characterized by Fourier‐transform infrared (FT‐IR) (acetonitrile molecule as probe), specific gravity, and ²⁷Al NMR. Besides, the effect of the mass ratio of FeCl₃ to AlCl₃, catalysts dosage, toluene/olefin molar ratio, reaction temperature, and reaction time on long‐chain alkenes alkylation were investigated thoroughly. And bromine value and high‐performance liquid chromatography (HPLC) were employed as the evaluation method for alkylation products. It was observed that the addition of anhydrous ferric chloride results in improvement in terms of Lewis acid and its catalytic recyclability. Among these catalysts studied, the catalyst modified with 1.0 wt.% anhydrous FeCl₃ showed the best catalytic performance in terms of yield and stability, which can be attributed to the formation of new stronger acidic ions [Al₂FeCl_l0]^? when the added ferric chloride reacts with acidic ions [Al₂Cl₇]^?.     

室温离子液体FeCl3-BPC体系的研究

利用差示扫描量热法(DSC)建立了无水三氯化铁和氯化正丁基吡啶(BPC)二元体系相图. 依据相图, FeCl₃和BPC形成室温离子液体的窗口是x＝0.26～0.58; 室温离子液体的深度是80 ℃. 利用UHF/6-31G^*对FeCl₃, FeCl₄^－, Fe₂Cl₇^－等配合物的几何结构、键长、能量和Raman频率进行优化, 从头算和Raman光谱证实了相图中FeCl₃摩尔分数x＝0.50处有稳定化合物存在, FeCl₄^－是主要阴离子; x＝0.67处, FeCl₄^－, Fe₂Cl₇^－是主要阴离子.     

Molecularly imprinted SPE coupled with HPLC for the selective separation and enrichment of alkyl imidazolium ionic liquids in environmental water samples

A novel 1‐butyl‐3‐methylimidazolium chloride ionic liquid surface imprinted solid‐phase sorbent was synthesized. The as‐prepared material was characterized by SEM, Brunauer–Emmett–Teller surface area analysis and Fourier Transform IR measurements. Then its adsorption properties for alkyl imidazolium ionic liquids, including adsorption capacities, adsorption kinetics, and properties of selective separation and enrichment were studied in detail. It was shown that the ionic liquid surface imprinted polymer exhibited high selective recognition characteristics for the imidazolium chloride ionic liquids with short alkyl chains (C_nmimCl, n = 2, 4, 6, 8) and the adsorption equilibrium was achieved within 25 min. Various parameters were optimized for the 1‐butyl‐3‐methylimidazolium chloride ionic liquid surface imprinted polymer SPE column, such as flow rate, eluent solvent, selectivity, and reusability of the column. Then, the SPE column coupled with HPLC was used for the determination of alkyl imidazolium ionic liquids. Experimental results showed that the existence of their structural analogs and common concomitants in environmental matrices did not affect the enrichment of 1‐butyl‐3‐methyl imidazolium chloride ionic liquid. The average recoveries of 1‐butyl‐3‐methylimidazolium chloride ionic liquid in spiked water samples were in the range of 92.0–102.0% with the RSD lower than 5.8%.     

The synthesis of Fe-containing ionic liquid and its catalytic performance for the dehydration of fructose

Four Fe-containing ionic liquids (ILs) were synthesized by coupling of conventional imidazole ionic liquids [C_xmim]Cl (x = 4, 8, 12, 16) with FeCl₃ and were characterized by FT-IR, Raman, ESI–MS and TG. All of the Fe-containing ILs were applied to the conversion of fructose into 5-hydroxymethylfurfural (HMF) in 1-butyl-3-methylimidazolium chloride ([Bmim]Cl) subsequently and the result showed that [C₁₆mim]FeCl₄ exhibited excellent catalytic performance. Then the different reaction parameters with [C₁₆mim]FeCl₄ as catalyst were studied in detail. A 92.8% yield of HMF was obtained with 0.03 g [C₁₆mim]FeCl₄ and 0.1 g fructose in 1.0050 g [Bmim]Cl at 80 °C for 40 min in fructose/[Bmim]Cl solution.     

Adding magnetic ionic liquid monomers to the emulsion polymerization tool‐box: Towards polymer latexes and coatings with new properties

Magnetic ionic liquid monomers were synthesized and then polymerized to get magnetic polymer latexes and films. First, a series of 1‐vinyl‐3‐dodecyl‐imidazolium monomers having metal halides counter‐anions such as FeCl₃Br^?, CoCl₂Br^?, and MnCl₂Br^? were synthesized. These ionic liquid monomers were first homopolymerized to lead to magnetic poly(ionic liquids) and characterized. Secondly, magnetic latexes were synthesized by using the magnetic ionic liquids as surfmers (surfactant + monomer) in the emulsion polymerization of methyl methacrylate/n‐butyl acrylate. It was found that the powders obtained by freeze‐drying the latexes presented a paramagnetic behavior with weak antiferromagnetic interactions between the adjacent metal ions. Although the ratio of magnetic ionic liquid/monomer was only 2% these poly(methyl methacrylate‐co‐butyl acrylate) powders and latexes responded to a magnetic field due to the surfmer paramagnetic nature. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1145–1152     

Synthesis,crystal structure and biological properties of Cd and Zn coordination polymers based on a flexible tripodal ligand

Two new coordination polymers, namely poly[[hexathiocyanatotetrakis{μ₃‐2,4,6‐trimethyl‐1,3,5‐tris[(triazol‐1‐yl)methyl]benzene}tricadmium(II)] 3.5‐hydrate], {[Cd₃(SCN)₆(C₁₈H₂₁N₉)₄]·3.5H₂O}_n ( 1 ), and poly[[hexathiocyanatotetrakis{μ₃‐2,4,6‐trimethyl‐1,3,5‐tris[(triazol‐1‐yl)methyl]benzene}trizinc(II)] 3.5‐hydrate], {[Zn₃(SCN)₆(C₁₈H₂₁N₉)₄]·3.5H₂O}_n ( 2 ), have been synthesized under hydrothermal conditions and characterized by elemental analysis, IR spectroscopy and single‐crystal X‐ray diffraction analysis. From the X‐ray analysis, it is noteworthy that polymers 1 and 2 are isostructural, with their three‐dimensional structures composed of three kinds of four‐connection metal ions and two kinds of three‐connection 2,4,6‐trimethyl‐1,3,5‐tris[(triazol‐1‐yl)methyl]benzene (TTTMB) ligand nodes. Each metal ion is six‐coordinated in a slightly distorted octahedral geometry. The antioxidant activity against DPPH (2,2‐diphenyl‐1‐picrylhydrazyl) and the antidiabetic activity against α‐amylase of the synthesized compounds were evaluated in vitro. The results of the DPPH free‐radical scavenging assay showed that polymers 1 and 2 exhibited strong antioxidant effects, with IC₅₀ values of 3.81 and 2.56 mg ml^?1, respectively. The IC₅₀ value in the antidiabetic studies of polymer 1 was 3.94 mg ml^?1, while polymer 2 exhibited no antidiabetic activity. Polymers 1 and 2 revealed different inhibitory activities on DPPH and α‐amylase, which indicated that the metal ions play important roles in the biological activity of coordination polymers. In addition, the solid‐state photoluminescence properties and thermal stability of 1 and 2 have been investigated.     

Self‐Assembly of Imidazolium‐Based Surfactants in Magnetic Room‐Temperature Ionic Liquids: Binary Mixtures

The phase behaviour of binary mixtures of ionic surfactants (1‐alkyl‐3‐imidazolium chloride, C_nmimCl with n=14, 16 and 18) and imidazolium‐based ionic liquids (1‐alkyl‐3‐methylimidazolium tetrachloroferrate, C_nmimFeCl₄, with n=2 and 4) over a broad temperature range and the complete range of compositions is described. By using many complementary methods including differential scanning calorimetry (DSC), polarised microscopy, small‐angle neutron and X‐ray scattering (SANS/SAXS), and surface tension, the ability of this model system to support self‐assembly is described quantitatively and this behaviour is compared with common water systems. The existence of micelles swollen by the solvent can be deduced from SANS experiments and represent a possible model for aggregates, which has barely been considered for ionic‐liquid systems until now, and can be ascribed to the rather low solvophobicity of the surfactants. Our investigation shows that, in general, C_nmimCl is a rather weak amphiphile in these ionic liquids. The amphiphilic strength increases systematically with the length of the alkyl chain, as seen from the phase behaviour, the critical micelle concentration, and also the level of definition of the aggregates formed.     

A Tale of Two Trimers from Two Different Worlds: A COF‐Inspired Synthetic Strategy for Pore‐Space Partitioning of MOFs

The introduction of a symmetry‐ and size‐matching pore‐partitioning agent in the form of either a molecular ligand, such as 2,4,6‐tri(4‐pyridinyl)‐1,3,5‐triazine ( tpt ), or a metal‐complex cluster, into the hexagonal channels of MIL‐88/MOF‐235‐type (the acs net) to create pacs ‐type (partitioned acs ) crystalline porous materials is an effective strategy to develop high‐performance gas adsorbents. We have developed an integrated COF–MOF coassembly strategy as a new method for pore‐space partitioning through the coassembly of [(M₃(OH)_1?x(O)_x(COO)₆] MOF‐type and [B₃O₃(py)₃] COF‐type trimers. With this strategy, the coordination‐driven assembly of the acs framework occurred concurrently and synergistically with the COF‐1‐type condensation of pyridine‐4‐boronic acid into a C₃‐symmetric trimeric boroxine molecule. The resulting boroxine‐based pacs materials exhibited dramatically enhanced gas‐sorption properties as compared to nonpartitioned acs ‐type materials and are among the most efficient NH₃‐sorption materials.