One‐stage Template‐free KOH Activation for Mesopore‐enriched Carbons and Their Application in CO2 Capture

Activated carbons with a high mesoporous structure were prepared by a one‐stage KOH activation process without the assistance of templates and further used as adsorbents for CO₂ capture. The physical and chemical properties as well as the pore structures of the resulting mesoporous carbons were characterized by N₂ adsorption isotherms, scanning electron microscopy (SEM ), X‐ray diffraction (XRD ), Raman spectroscopy, and Fourier transform infrared (FTIR ) spectroscopy. The activated carbon showed greater specific surface area and mesopore volume as the activation temperature was increased up to 600°C, showing a uniform pore structure, great surface area (up to ~815 m²/g), and high mesopore ratio (~55%). The activated sample exhibited competitive CO₂ adsorption capacities at 1 atm pressure, reaching 2.29 and 3.4 mmol/g at 25 and 0°C, respectively. This study highlights the potential of well‐designed mesoporous carbon as an adsorbent for CO₂ removal and widespread gas adsorption applications.     

Synthesis of High‐Surface‐Area Nitrogen‐Doped Porous Carbon Microflowers and Their Efficient Carbon Dioxide Capture Performance

Sustainable carbon materials have received particular attention in CO₂ capture and storage owing to their abundant pore structures and controllable pore parameters. Here, we report high‐surface‐area hierarchically porous N‐doped carbon microflowers, which were assembled from porous nanosheets by a three‐step route: soft‐template‐assisted self‐assembly, thermal decomposition, and KOH activation. The hydrazine hydrate used in our experiment serves as not only a nitrogen source, but also a structure‐directing agent. The activation process was carried out under low (KOH/carbon=2), mild (KOH/carbon=4) and severe (KOH/carbon=6) activation conditions. The mild activated N‐doped carbon microflowers (A‐NCF‐4) have a hierarchically porous structure, high specific surface area (2309 m² g^?1), desirable micropore size below 1 nm, and importantly large micropore volume (0.95 cm³ g^?1). The remarkably high CO₂ adsorption capacities of 6.52 and 19.32 mmol g^?1 were achieved with this sample at 0 °C (273 K) and two pressures, 1 bar and 20 bar, respectively. Furthermore, this sample also exhibits excellent stability during cyclic operations and good separation selectivity for CO₂ over N₂.     

Amine functionalised metal organic frameworks (MOFs) as adsorbents for carbon dioxide

Three different porous metal organic framework (MOF) materials have been prepared with and without uncoordinated amine functionalities inside the pores. The materials have been characterized and tested as adsorbents for carbon dioxide. At 298 K the materials adsorb significant amount of carbon dioxide, the amine functionalised adsorbents having the highest CO₂ adsorption capacities, the best adsorbing around 14 wt% CO₂ at 1.0 atm CO₂ pressure. At 25 atm CO₂ pressure, up to 60 wt% CO₂ can be adsorbed. At high pressures the CO₂ uptake is mostly dependent on the available surface area and pore volume of the material in question. For one of the iso-structural MOF pairs the introduction of amine functionality increases the differential adsorption enthalpy (from isosteric method) from 30 to around 50 kJ/mole at low CO₂ pressures, while the adsorption enthalpies reach the same level at increase pressures. The high pressure experimental results indicate that MOF based solid adsorbents can have a potential for use in pressure swing adsorption of carbon dioxide at elevated pressures.     

Nitrogen-Doped Porous Carbon Materials Derived from Graphene Oxide/Melamine Resin Composites for CO2 Adsorption

CO₂ adsorption in porous carbon materials has attracted great interests for alleviating emission of post-combustion CO₂. In this work, a novel nitrogen-doped porous carbon material was fabricated by carbonizing the precursor of melamine-resorcinol-formaldehyde resin/graphene oxide (MR/GO) composites with KOH as the activation agent. Detailed characterization results revealed that the fabricated MR(0.25)/GO-500 porous carbon (0.25 represented the amount of GO added in wt.% and 500 denoted activation temperature in °C) had well-defined pore size distribution, high specific surface area (1264 m²·g⁻¹) and high nitrogen content (6.92 wt.%), which was mainly composed of the pyridinic-N and pyrrolic-N species. Batch adsorption experiments demonstrated that the fabricated MR(0.25)/GO-500 porous carbon delivered excellent CO₂ adsorption ability of 5.21 mmol·g⁻¹ at 298.15 K and 500 kPa, and such porous carbon also exhibited fast adsorption kinetics, high selectivity of CO₂/N₂ and good recyclability. With the inherent microstructure features of high surface area and abundant N adsorption sites species, the MR/GO-derived porous carbon materials offer a potentially promising adsorbent for practical CO₂ capture.     

Synthesis,characterization, and KOH activation of nanoporous carbon for increasing CO2 adsorption capacity

Ordered nanoporous carbons (ONCs) were prepared using a soft-templating method. To improve the CO₂ adsorption efficiency, ONCs were chemically activated to obtain high specific surface area and micro-/mesopore volume with different KOH amounts (i.e., 0, 1, 2, 3, and 4) as an activating agent. The prepared nanoporous carbons (NCs) materials were analyzed by low-angle X-ray diffraction for confirmation of synthesized ONCs structures. The structural properties of the NCs materials were analyzed by high-angle X-ray diffraction. The textural properties of the NCs materials were examined using the N₂/77 K adsorption isotherms according to the Brunauer–Emmett–Teller equation. The CO₂ adsorption capacity was measured by CO₂ isothermal adsorption at 298 K/1 bar. From the results, the NCs activated with KOH showed that the increasing specific surface areas and total pore volumes resulted in the enhancement of CO₂ adsorption capacity.     

Adsorption of SO2 by typical carbonaceous material: a comparative study of carbon nanotubes and activated carbons

Applying activated carbons for SO₂ adsorption and conversion to H₂SO₄, as a dry process, has been considered the development direction of desulfurization technology. Coal-based activated carbon, coconut shell activated carbon, single wall carbon nanotube and multi-wall carbon nanotubes were used as typical carbonaceous materials to study the SO₂ adsorption mechanism. SEM, N₂ adsorption, XPS and fixed-bed reaction system were employed to study the morphology, pore structure, surface functional groups and SO₂ adsorption behaviors of the four adsorbents. The fixed-bed experiment was carried out at normal pressure and SO₂ concentration was set 1,000 ppm. According to SEM and N₂ adsorption results, hierarchical pore structure was an important characteristic of activated carbon. Aggregation was an important characteristic of CNTs. Mesopores and macropores took the dominance of pore structure in CNTs. According the SO₂ adsorption data and correlation analysis, it can be concluded that the dominant adsorption type on activated carbons does not alter with adsorption temperature changing. However, the adsorption type of SO₂ adsorption on CNTs changes with adsorption temperature varying. With adsorption temperature increasing, the dominant adsorption type transforms to chemisorption by physisorption. Higher-density π–π* in carbon nanotubes may be the active sites for the SO₂ chemical adsorption. Micropores with the diameter smaller than 0.7 nm were the best SO₂ adsorption place for both activated carbons and carbon nanotubes. The results provided a profound insight into the microstructure and SO₂ adsorption mechanism of the two kinds of carbonaceous materials.     

A synthesis of porous activated carbon materials derived from vitamin B9 base for CO2 capture and conversion

CO₂ capture and conversion are still a favorable way to reduce CO₂ in the atmosphere. Herein, we have developed an environmentally friendly, low energy consumption porous activated carbon from vitamin B9 carbonaceous material for CO₂ capture and conversion materials. It is demonstrated that the KOH/vitamin B9 carbonaceous material impregnation ratio of 2 is the optimum condition for obtaining porous activated carbons with high specific surface area of 1903 m²g^-1, micropore surface area of 710 m²g^-1, total pore volume of 1.05 cm³g^-1 and micropore volume of 0.38 cm³g^-1. Among all the porous activated carbons prepared, the porous activated carbon synthesized with the KOH/vitamin B9 carbonaceous material impregnation ratio of 2 registers the most excellent CO₂ capture for 5.41 mmolg^?1 at 0 °C/1 bar and 3.66 mmolg^?1 at 25 °C/1 bar. They can also effectively catalyze the cycloaddition of CO₂ and epoxides under mild conditions (1 bar, 100 °C and 8 h) with a yield of 89–94%. The synthesized porous carbon materials from vitamin B9 is a promising candidate material for CO₂ capture and fixation.     

Preparation and characterization of templated porous carbons from sucrose by one-pot method and application as a CO2 adsorbent

The templated porous carbons were prepared from sucrose by one-pot method. In this method in which the pre-synthesis of the hard template is eliminated, the porous carbons were produced by organic-inorganic self-assembly of sucrose, tetraethyl ortosilicate (TEOS), Pluronic P123 and n-butanol in an acidic medium, and subsequent carbonization. The synthesis parameters such as sucrose amount, TEOS molar ratio and carbonization temperature were evaluated for describing their effects on the pore structures of the synthesized carbons. The prepared porous carbons were characterized by N₂ adsorption, thermogravimetric analysis (TGA), Raman spectroscopy, X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), and transmission electron microscopy (TEM) techniques. The carbon dioxide adsorption uptakes of the obtained porous carbons were determined at 1 bar and 273 K. The templated carbon obtained with the lowest TEOS molar ratio exhibited the highest BET surface area of 1289 m²/g and micropore volume of 0.467 cm³/g, and showed the highest CO₂ uptake of 2.28 mmol/g.     

Preparation and characterization of waste ion-exchange resin-based activated carbon for CO<Subscript>2</Subscript> capture

Waste ion-exchange resin was utilized as precursor to produce activated carbon by KOH chemical activation, on which the effects of different activation temperatures, activation times and impregnation ratios were studied in this paper. The CO₂ adsorption of the produced activated carbon was tested by TGA at 30 °C and environment pressure. Furthermore, the effects of preparation parameters on CO₂ adsorption were investigated. Experimental results show that the produced activated carbons are microporous carbons, which are suitable for CO₂ adsorption. The CO₂ adsorption capacity increases firstly and then decreases with the increase of activation temperature, activation time and impregnation rate. The maximum adsorption capacity is 81.24 mg/g under the condition of 30 °C and pure CO₂. The results also suggest that waste ion-exchange resin-based activated carbons possess great potential as adsorbents for post-combustion CO₂ capture.     

Preparation and characterization of bimodal porous carbons derived from a styrene-divinylbenzene copolymer

A styrene/divinylbenzene copolymer has been used as precursor for making porous carbons with bimodal pore size distributions (i.e., with both microporosity and mesoporosity). Pretreatment of the as-received copolymer by mild oxidation in air, significantly increased the carbon yield after carbonization. Reactivity studies of the polymer-based chars to CO₂ clearly show the influences of some important factors such as carbonization temperature, heating rate, soak time on char reactivities. Bimodal porous carbons were prepared by carbonization of the preoxidized styrene/divinylbenzene copolymer in N₂, followed by activation in CO₂ at different temperatures to different levels of burnoff. The pore structures of the porous carbons produced have been characterized by various techniques such as gas adsorption and mercury porosimetry. The surfaces of the porous carbons produced, and a commercial carbon adsorbent, have been modified with HNO₃ and H₂O₂ treatment at various conditions. Characterization of the surface oxygen functionality, both quantitatively and qualitatively, has been achieved using techniques such as Linear Temperature Programed Desorption (LTPD) and selective neutralization of bases.     

One-step synthesis of biomass derived O,N-codoped hierarchical porous carbon with high surface area for supercapacitors

We report a convenient method to synthesize O, N-codoped hierarchical porous carbon by one-step carbonization of the mixture of KHCO₃, urea and alginic acid. Benefiting from KHCO₃ and urea synergistic effect, the obtained O, N-codoped hierarchical porous carbon (NPC-700) material has a well-developed interconnected porous framework with ultrahigh specific surface area (2846 m²/g) and massive heteroatoms functional groups. Consequence, such porous carbon displays high specific capacitance (324 F/g at 1 A/g), excellent rate performance (212 F/g at 30 A/g) and good electrochemical stabilization in 6 mol/L KOH solution. More importantly, the assembled NPC-700//NPC-700 symmetrical supercapacitor can achieve a high energy density of 18.8 Wh/kg and good electrochemical stabilization in 1 mol/L Na₂SO₄ solution. This process opens up a new way to design heteroatoms-doped hierarchical porous carbon derived from biomass materials for supercapacitors.     

The Use of High Surface Area Mesoporous-Activated Carbon from Longan Seed Biomass for Increasing Capacity and Kinetics of Methylene Blue Adsorption from Aqueous Solution

Microporous- and mesoporous-activated carbons were produced from longan seed biomass through physical activation with CO₂ under the same activation conditions of time and temperature. The specially prepared mesoporous carbon showed the maximum porous properties with the specific surface area of 1773 m²/g and mesopore volume of 0.474 cm³/g which accounts for 44.1% of the total pore volume. These activated carbons were utilized as porous adsorbents for the removal of methylene blue (MB) from an aqueous solution and their effectiveness was evaluated for both the adsorption kinetics and capacity. The adsorption kinetic data of MB were analyzed by the pseudo-first-order model, the pseudo-second-order model, and the pore-diffusion model equations. It was found that the adsorption kinetic behavior for all carbons tested was best described by the pseudo-second-order model. The effective pore diffusivity (D_e) derived from the pore-diffusion model had the values of 4.657 × 10⁻⁷–6.014 × 10⁻⁷ cm²/s and 4.668 × 10⁻⁷–19.920 × 10⁻⁷ cm²/s for the microporous- and mesoporous-activated carbons, respectively. Three well-known adsorption models, namely the Langmuir, Freundlich and Redlich–Peterson equations were tested with the experimental MB adsorption isotherms, and the results showed that the Redlich–Peterson model provided the overall best fitting of the isotherm data. In addition, the maximum capacity for MB adsorption of 1000 mg/g was achieved with the mesoporous carbon having the largest surface area and pore volume. The initial pH of MB solution had virtually no effect on the adsorption capacity and removal efficiency of the methylene blue dye. Increasing temperature over the range from 35 to 55 °C increased the adsorption of methylene blue, presumably caused by the increase in the diffusion rate of methylene blue to the adsorption sites that could promote the interaction frequency between the adsorbent surface and the adsorbate molecules. Overall, the high surface area mesoporous carbon was superior to the microporous carbon in view of the adsorption kinetics and capacity, when both carbons were used for the removal of MB from an aqueous solution.     

由微孔棒状羟基磷灰石为模板合成的新型层次孔炭材料的电化学电容性能

电化学电容器已经成为极具潜力的可满足高功率需求的储能系统器件. 多孔炭具有大比表面积、高导电性、化学惰性、廉价及可调孔结构等优势, 因此成为电化学电容器最为常用的电极材料. 本文报道由微孔棒状羟基磷灰石为模板及蔗糖为碳源合成的新型具有层次孔道结构的孔炭材料的电化学电容器的性能. 采用X射线衍射分析仪、扫描电子显微镜、透射电子显微镜、X射线光电子能谱及BET表面分析仪表征了合成的多孔炭的形貌及表面特性. 采用循环伏安法、交流阻抗图谱分析及恒流充放电评价多孔炭材料在1 mol·L^-1硫酸中的电化学电容性能. 多孔炭具有高的比表面积(719.7 m²·g^-1)和大的孔容(1.32 cm³·g^-1), 其无序的孔道由任意分布的微孔、坍塌的中孔及类模板形状的相互交织的棒状中孔组成. 随着炭化温度的增加, 微孔及棒状中孔的密度随之降低, 在炭化温度高达900℃时, 孔径分布图上出现了三个峰. 正是由于这些特殊的结构特征, 由900℃炭化得到的多孔炭制成的电极展示出很好的电化学电容性能.     

Enhanced CO2 Adsorption over Polymeric Amines Supported on Heteroatom‐Incorporated SBA‐15 Silica: Impact of Heteroatom Type and Loading on Sorbent Structure and Adsorption Performance

Silica supported amine materials are promising compositions that can be used to effectively remove CO₂ from large stationary sources, such as flue gas generated from coal‐fired power plants (ca. 10 % CO₂) and potentially from ambient air (ca. 400 ppm CO₂). The CO₂ adsorption characteristics of prototypical poly(ethyleneimine)–silica composite adsorbents can be significantly enhanced by altering the acid/base properties of the silica support by heteroatom incorporation into the silica matrix. In this study, an array of poly(ethyleneimine)‐impregnated mesoporous silica SBA‐15 materials containing heteroatoms (Al, Ti, Zr, and Ce) in their silica matrices are prepared and examined in adsorption experiments under conditions simulating flue gas (10 % CO₂ in Ar) and ambient air (400 ppm CO₂ in Ar) to assess the effects of heteroatom incorporation on the CO₂ adsorption properties. The structure of the composite adsorbents, including local information concerning the state of the incorporated heteroatoms and the overall surface properties of the silicate supports, are investigated in detail to draw a relationship between the adsorbent structure and CO₂ adsorption/desorption performance. The CO₂ adsorption/desorption kinetics are assessed by thermogravimetric analysis and in situ FT‐IR measurements. These combined results, coupled with data on adsorbent regenerability, demonstrate a stabilizing effect of the heteroatoms on the poly(ethyleneimine), enhancing adsorbent capacity, adsorption kinetics, regenerability, and stability of the supported aminopolymers over continued cycling. It is suggested that the CO₂ adsorption performance of silica–aminopolymer composites may be further enhanced in the future by more precisely tuning the acid/base properties of the support.     

Equilibrium isotherms and isosteric heat for CO<Subscript>2</Subscript> adsorption on nanoporous carbons from polymers

Four nanoporous carbons obtained from different polymers: polypyrrole, polyvinylidene fluoride, sulfonated styrene–divinylbenzene resin, and phenol–formaldehyde resin, were investigated as potential adsorbents for carbon dioxide. CO₂ adsorption isotherms measured at eight temperatures between 0 and 60 °C were used to study adsorption properties of these polymer-derived carbons, especially CO₂ uptakes at ambient pressure and different temperatures, working capacity, and isosteric heat of adsorption. The specific surface areas and the volumes of micropores and ultramicropores estimated for these materials by using the density functional theory-based software for pore size analysis ranged from 840 to 1990 m² g^?1, from 0.22 to 1.47 cm³ g^?1, and from 0.18 to 0.64 cm³ g^?1, respectively. The observed differences in the nanoporosity of these carbons had a pronounced effect on the CO₂ adsorption properties. The highest CO₂ uptakes, 6.92 mmol g^?1 (0 °C, 1 atm) and 1.89 mmol g^?1 (60 °C, 1 atm), were obtained for the polypyrrole-derived activated carbon prepared through a single carbonization-KOH activation step. The working capacity for this adsorbent was estimated to be 3.70 mmol g^?1. Depending on the adsorbent, the CO₂ isosteric heats of adsorption varied from 32.9 to 16.3 kJ mol^?1 in 0–2.5 mmol g^?1 range. Overall, the carbons studied showed well-developed microporosity and exceptional CO₂ adsorption, which make them viable candidates for CO₂ capture, and for other adsorption and environmental-related applications.     

Preparation and performance of polyvinyl alcohol-based activated carbon as electrode material in both aqueous and organic electrolytes

Porous carbon materials with high surface area and different pore structure have been successfully prepared by phenolic resin combined with polyvinyl alcohol (PVA) and KOH as activation agents. The surface morphology, structure, and specific surface area of the carbon materials were studied by scanning electron microscopy, X-ray diffraction, and nitrogen sorption measurement, respectively. Furthermore, the effects of specific surface area, pore structure, and electrolyte on electrochemical properties were investigated by galvanostatic charge–discharge measurement. The results show that KOH–PVA-activated carbon materials display specific capacitance as high as 218 F?g^?1 in 30 wt.% KOH aqueous electrolyte, 147 F?g^?1 in 1 M LiPF₆/(ethylene carbonate (EC) + dimethyl carbonate) (1:1?v/v), and 115 F?g^?1 in 1 M Et₃MeNBF₄/propylene carbonate organic electrolyte, respectively. In addition, the carbon materials demonstrate long-term cycle stability, especially the AK3P-0.30 in aqueous electrolyte and the AK2P-0.30 with excellent rate capability in organic electrolyte. These reveal that the existence of a micro-mesoporous structure of activated carbon is beneficial to store energy in an aqueous supercapacitor and broad pore size distribution of activated carbon is favorable to energy storage in an organic supercapacitor. The carbon materials with pore size distribution in different ranges improve the electrochemical performance of supercapacitor in different electrolytes. A new pore-expand agent (PVA combining with KOH) was used to obtain porous carbons with enhanced properties for supercapacitor.     

Water vapor adsorption and microporous structure of carbon adsorbents. 17. Analysis of experimental isotherms for water vapor adsorption

Water vapor adsorption for various activated carbons with narrow and wide micropore volume distributions and mesopore surface areas between 40 and 300 m²/g have been investigated. For all the isotherms the point of inflection was determined, which can be taken as the point characterizing the formation of a water adsorption layer on the pore wall surface of carbon adsorbents. To do this the adsorption and desorption branches of the isotherms were approximated according to Weibull's distribution. A good correlation was obtained between values for the water monolayer capacity, calculated from the porous structure parameters of the carbons, and the adsorption values corresponding to the isotherm inflection pointsa _inf. For the group of carbons studied the values of relative pressure at the inflection point of the isotherms fell within the range 0.5–0.72.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 1, pp. 31–34, January, 1991.     

Biomass-derived activated carbon materials with plentiful heteroatoms for high-performance electrochemical capacitor electrodes

Activated carbons for electrochemical capacitor electrodes are prepared from soyabean using chemical activation with KOH. The pore size is easily controllable by changing the mass ratio between KOH and carbonized product. The as-prepared materials possess a large specific surface area, unique structure, well- developed hierarchical porosity and plentiful heteroatoms(mainly O and N). Thus resulted in its high specific capacitance,good rate capacity and cycling stability. Moreover, attributing to worldwide availability, renewable nature and low-cost, activated carbon prepared from soyabean has a good potential in energy conversion and storage devices.     

壳聚糖基多孔碳材料的制备及其超级电容性能

以胶态SiO₂纳米粒子为模板,壳聚糖为碳源,ZnCl₂为活化剂,制备了具有不同比表面积和孔体积的氮掺杂介孔碳。采用多种表征手段对碳材料的微观形貌、比表面积和孔道结构进行了表征,探究了壳聚糖与SiO₂纳米粒子的比例以及ZnCl₂活化剂对碳材料孔体积和比表面积的影响。结果表明,在未使用活化剂时碳材料(CSi-1.75)的孔体积高达4.53 cm³·g^-1,但其比表面积最小(729 m²·g^-1);使用ZnCl₂作为活化剂制备的碳材料(CSi-1.75-Zn)比表面积为1 032 m²·g^-1,但其孔体积下降到1.99 cm³·g^-1,且具有最多的吡啶氮和吡咯氮。在以6.0 mol·L^-1KOH为电解液的三电极体系中,当电流密度为0.5 A·g^-1时,CSi-1.75...