锰-二茂铁基配位聚合物微球的制备与表征

采用溶剂热法制得了一系列锰-二茂铁基配位聚合物微球,系统研究了反应时间、反应物浓度等因素对配位聚合物微球的形貌和尺寸的影响规律,采用SEM、TEM、PXRD、EDX和FTIR等方法研究了微球的形貌、尺寸和结构等.发现通过调节反应时间,可使微球的尺寸约在4 ～9 μm范围内变化,提高反应物浓度可使微球从光滑的球形结构向核...     

pH-Responsive hollow polymeric microspheres and concentric hollow silica microspheres from silica-polymer core-shell microspheres

Nearly monodispersed silica-poly(methacrylic acid) (SiO 2-PMAA) core-shell microspheres were synthesized by distillation-precipitation polymerization from 3-(trimethoxysilyl)propylmethacrylate-silica (SiO 2-MPS) particle templates. SiO 2-PMAA-SiO 2 trilayer hybrid microspheres were subsequently prepared by coating of an outer layer of SiO 2 on the SiO 2-PMAA core-shell microspheres in a sol-gel process. pH-Responsive PMAA hollow microspheres with flexible (deformable) shells were obtained after selective removal of the inorganic SiO 2 core from the SiO 2-PMAA core-shell microspheres by HF etching. The pH-responsive properties of the PMAA hollow microspheres were investigated by dynamic laser scattering (DLS). On the other hand, concentric and rigid hollow silica microspheres were prepared by selective removal of the PMAA interlayer from the SiO 2-PMAA-SiO 2 trilayer hybrid microspheres during calcination. The hybrid composite microspheres, pH-sensitive hollow microspheres, and concentric hollow silica microspheres were characterized by field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), Fourier transform infrared (FT-IR) spectroscopy, X-ray photoelectron spectroscopy (XPS), and energy-dispersive X-ray (EDX) analysis.     

ZnO-based hollow microspheres with mesoporous shells: Polyoxometalate-assisted fabrication, growth mechanism and photocatalytic properties

With the assistance of Keggin-type polyoxometalate, ZnO hollow microspheres with mesoporous shells were synthesized via a simple solvothermal approach without any templates and surfactants. The observations of morphology and structure performed by field emission scanning electronic microscopy and transmission electron microscopy indicated that the shells of the ZnO hollow spheres were built from nanosheets which were composed of nanoparticles. The transformation of structure and composition of samples were investigated by X-ray diffraction, X-ray photoelectron spectrometry and fourier transform infrared absorption spectroscopy. The formation mechanism of the hollow spheres is proposed based on time-dependent experimental results. The ZnO hollow microspheres exhibited a high photocatalytic activity for decolorization of Rhodamine B under ultraviolet irradiation.     

dl‐Aspartic Acid‐Mediated Hydrothermal Synthesis of β‐ZnS Microspheres and Their Optical Properties

ZnS hollow microspheres were synthesized by a dl ‐aspartic acid mediated hydrothermal route. dl ‐aspartic acid plays an important role as crystal growth soft template, which regulates the release of Zn²⁺ ions for the formation of ZnS hollow spheres. The formation of these hollow spheres was mainly attributed to an Ostwald ripening process. The products were characterized by X‐ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), transmission electron microscopy (TEM), high resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED), electron diffraction (ED), UV/Vis spectroscopy (UV), and photoluminescence (PL). The shells of the microspheres were composed of ZnS quantum dots (QDs) with the average size of 2.31 nm. The average microspheres diameter is 0.5–3.5 μm. The shell thickness of the hollow sphere is ≈?300 nm. The optical bandgap energy increased significantly compared to the bulk ZnS material due to the strong quantum confinement effect. Two strong emissions at ≈?425 nm and ≈?472 nm in the photoluminescence (PL) spectrum of ZnS hollow microspheres indicate strong quantum confinement because of the presence of QDs.     

Self-assembly and enhanced photocatalytic properties of BiOI hollow microspheres via a reactable ionic liquid

BiOI uniform flowerlike hollow microspheres with a hole in its surface structures have been successfully synthesized through an EG-assisted solvothermal process in the presence of ionic liquid 1-butyl-3-methylimidazolium iodine ([Bmim]I). The as-prepared samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDS), nitrogen sorption, and diffuse reflectance spectroscopy (DRS). A possible formation mechanism for the growth of hollow microspheres was discussed. During the reactive process, ionic liquid not only acted as solvents and templates but also as an I source for the fabrication of BiOI hollow microspheres and was vital for the structure of hollow microspheres. Additionally, we evaluated the photocatalytic activities of BiOI on the degradation of methyl orange (MO) under visible light irradiation and found that as-prepared BiOI hollow microspheres exhibited higher photocatalytic activity than BiOI nanoplates and TiO(2) (Degussa, P25) did. On the basis of such analysis, it can be assumed that the enhanced photocatalytic activities of BiOI hollow microspheres could be ascribed to its energy band structure, high BET surface area, high surface-to-volume ratios, and light absorbance.     

Silver Hollow Microspheres: Large-scale Synthesis, Characterization and Electromagnetic Shielding Property

A facile and large-scale synthesis method to fabricate silver hollow microspheres with controllable morphologies and shell thickness is described using low-cost glass microspheres as templates. The method mainly involves two steps of the preparation of silver-coated glass microsphere core-shell particles by a controllable liquid reduced reaction of Ag[(NH3)2]+ solution, which only produces silver nanoparticles anchored on the surface of the thiolated glass microsphere templates, and the removal of glass microspheres by wet chemical etching with HF solution. The products are well characterized by field emitted scanning electron microscopy (SEM), transmitted electron microscopy (TEM), X-ray photoelectron spectra (XPS), X-ray diffraction (XRD) and energy dispersive X-ray (EDX) etc. The as-prepared core-shell particles and hollow particles have even and compact silver shells. The electromagnetic shielding coatings based on the silver hollow microspheres are demonstrated to have high conductivity, excellent shielding effectiveness and long durability, suggesting that the silver hollow microspheres obtained here are a novel light-weight electromagnetic shielding filler and will have extensive applications in the electromagnetic compatibility fields.     

空心玻璃微珠/TiO2复合微球的制备及其性能研究

本文以脲为沉淀剂,通过化学沉淀法成功实现了锐钛矿型二氧化钛壳层在空心玻璃微珠表面的可控组装,从而制备出玻璃/二氧化钛核壳空心微球,并通过XRD、SEM、EDX和拉曼光谱对其结构、形貌、粒径、壳厚和化学组成进行了表征.提出了二氧化钛在空心玻璃微珠表面的定向生长的可能机制和形成过程.     

Silicon dioxide hollow microspheres with porous composite structure: synthesis and characterization

In this paper, a strategy for hollow porous silica microspheres with ideally flower structure is presented. SiO(2)/PAM hybrid composite microspheres with porous were synthesized by the reaction that the porous polyacrylamide (PAM) micro-gels immersed in tetraethoxysilane (TEOS) anhydrous alcohol solution and water in a moist atmosphere, with ammonium hydroxide as a catalyst. The SiO(2) hollow microspheres with porous were obtained after calcination of the composite microspheres at 550 °C for 4 h. The morphology, composition, and crystalline structure of the microspheres were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), thermo-gravimetric analysis (TGA), Fourier transform infrared spectroscopy (FI-IR), and X-ray diffraction (XRD), N(2) absorption analysis, respectively. The results indicated that the obtained hollow porous SiO(2) microspheres were a perfect flower structure.     

锌离子掺杂的二氧化钛介孔空心微球的制备及光催化性能

以二氧化硅为模板,钛酸四丁酯(TBOT)为钛源,硝酸锌为锌源,采用溶胶凝胶法制备了锌离子掺杂的介孔二氧化钛空心微球。采用X射线衍射(XRD)、比表面积(BET)、透射电镜(TEM)、扫描电镜(SEM)和X射线光电子能谱(XPS)等技术对样品进行表征,以亚甲基蓝(MB)的光催化降解为目标反应评价其光催化活性。结果表明,去核之后的复合微球为空心微球,壁厚为20 nm左右。钛酸四丁酯溶液的滴加时间对微球的形貌影响较大,当滴加时间大于15 min时,可以得到结构清晰的空心微球。用氢氧化钠溶液去除二氧化硅核,反应90 min,二氧化硅可以被完全去除。X射线衍射表明,实验得到的掺杂锌离子的空心微球和没有掺杂锌离子的空心微球都是锐钛矿。当锌离子的摩尔分数为0.3%时,二氧化钛空心微球的晶粒尺寸最小,比表面积最大,催化亚甲基蓝降解的效率最高。     

锌离子掺杂的二氧化钛介孔空心微球的制备及光催化性能

以二氧化硅为模板,钛酸四丁酯（TBOT）为钛源,硝酸锌为锌源,采用溶胶凝胶法制备了锌离子掺杂的介孔二氧化钛空心微球。采用X射线衍射（XRD）、比表面积（BET）、透射电镜（TEM）、扫描电镜（SEM）和X射线光电子能谱（XPS）等技术对样品进行表征,以亚甲基蓝（MB）的光催化降解为目标反应评价其光催化活性。结果表明,去核之后的复合微球为空心微球,壁厚为20nm左右。钛酸四丁酯溶液的滴加时间对微球的形貌影响较大,当滴加时间大于15min时,可以得到结构清晰的空心微球。用氢氧化钠溶液去除二氧化硅核,反应90min,二氧化硅可以被完全去除。X射线衍射表明,实验得到的掺杂锌离子的空心微球和没有掺杂锌离子的空心微球都是锐钛矿。当锌离子的摩尔分数为0.3%时,二氧化钛空心微球的晶粒尺寸最小,比表面积最大,催化亚甲基蓝降解的效率最高。     

Highly sensitive WO3 hollow-sphere gas sensors

In this paper, we describe how WO(3) hollow spheres have been synthesized in solution phase by the controlled hydrolysis of WCl(6) using novel carbon microspheres as the templates. All of the products were characterized by X-ray powder diffraction (XRD), scanning electronic microscopy (SEM), and transmission electron microscopy (TEM). The as-synthesized spheres had large diameters of about 400 nm and thin shells of about 30 nm composed of numerous small nanocrystals. Prompted by the porous structure and small crystal size of the shell wall, we constructed WO(3) hollow-sphere gas sensors and found that these sensors had good sensitivity to alcohol, acetone, CS(2), and other organic gases.     

Chelating ligand-mediated synthesis of hollow ZnS microspheres and its optical properties

Monodispersed hollow ZnS microspheres have been successfully synthesized by a facile ethylenediamine tetraacetic acid (EDTA) mediated hydrothermal route. The sizes of the hollow spheres vary from 1.5 to 3.5 microm when the reaction temperature varied from 130 to 230 degrees C. The formation of these hollow spheres is attributed to the oriented aggregation of ZnS nanocrystals around the gas-liquid interface between H(2)S and water. EDTA plays important role as chelating ligand and capping reagent, which regulates the release of Zn(2+) ions for the formation of ZnS hollow spheres. The products were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), UV-vis spectroscopy, photoluminescence, and Raman spectroscopy. The obtained ZnS hollow spheres show a sharp and photostable UV emission approximately 370 nm, which is attributed to the recombination process associated with interstitial sulfur vacancy.     

离子液体辅助CaMoO4中空微米球的制备及光学性质研究

以1-正丁基-3-甲基咪唑溴盐离子液体([BMIM]Br)/水体系为反应介质，利用简便的液相沉淀法在室温下合成了钼酸钙(CaMoO₄)中空微球体材料。分别利用X-射线粉末衍射(XRD)、场发射扫描电子显微镜(SEM)以及透射电子显微镜(TEM)对产品的相结构及形貌进行表征，发现产品为空心结构的白钨矿型微米级球体,并且该CaMoO₄微球体是由粒径为10～20 nm的纳米粒子聚集而成。利用紫外可见(UV-Vis)漫反射谱及室温光致发光(PL)谱测试了产品的光学性质。通过与纯水相、1-乙基-3-甲基咪唑溴盐离子液体([EMIM]Br)/水及1-正己基-3-甲基咪唑溴盐离子液体([HMIM]Br)/水等体系中所得产品的对比，证明了[BMIM]Br对产品的形貌及光学性能等具有重要影响，并对中空微球体形成的机理进行了讨论。     

溶剂热方法合成Cu2ZnSnS4空心球

以氯化亚铜,硝酸锌,氯化锡和硫脲作为反应前驱体,聚乙二醇作为模板,利用溶剂热方法合成Cu₂ZnSnS₄中空球。其中,聚乙二醇对于产物的最终形成起到关键作用。文章讨论了Cu₂ZnSnS₄中空球的生长机制,并通过X射线衍射(XRD)、拉曼光谱、场发射电子显微镜(FESEM)、透射电子显微镜(TEM)、X射线能量色散谱(EDX)、X射线光电子谱(XPS)、选区电子衍射谱(SAED)和紫外-可见光分光光度计(UV-Vis)等技术对样品的微结构以及光学性质进行了表征和分析。结果显示Cu₂ZnSnS₄中空球为四方晶体,尺寸为600 nm。其禁带宽度为1.52 eV,适用于制作光伏器件。     

Porous α-Fe2O3 hollow microspheres and their application for acetone sensor

Porous α-Fe₂O₃ hollow microspheres were synthesized through a simple and efficient carbon sphere template method. The samples were characterized by X-ray diffraction, X-ray photoelectron spectroscopy, scanning electron microscopy, transmission electron microscopy and N₂ adsorption-desorption. Structural characterization indicated that as-prepared α-Fe₂O₃ hollow microspheres had porous structure with around 200 nm in diameter and thin shell about 10 nm thick. The average pore size and Brunauer-Emmett-Teller specific surface area of α-Fe₂O₃ hollow microspheres were 6.5 nm and 111.6 m²/g, respectively. The gas sensing behavior investigation showed that as-synthesized α-Fe₂O₃ hollow microspheres exhibited very good gas sensing property to acetone vapor.     

Triple assembly of ZnO, large-scale hollow spherical shells with flower-like species consisting of rods grown on the outer surfaces of shells

Novel large-scale hollow ZnO spherical shells were synthesized by ionic liquids assisted hydrothermal oxidization of pure zinc powder without any catalyst at a relatively low temperature of 160 °C. X-ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDX) and scanning electron microscopy (SEM) patterns show that the shells are composed of ZnO and the structure of the shells is very unique. Textured flower-like ZnO consisting of ZnO rods is grown on the outer surfaces of shells forming a triple assembly. Room-temperature photoluminescence spectra of the oxidized material show a sharp peak at 379 nm and a wider broad peak centered at 498 nm. The possible growth mechanism of the triple assembly of ZnO is discussed in detail.     

Sonochemical synthesis of hollow PbS nanospheres

PbS hollow nanospheres with diameters of 80-250 nm have been synthesized by a surfactant-assisted sonochemical route. The nanostructures were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), (high-resolution) transmission electron microscopy [(HR)TEM], and scanning electron microscopy (SEM) images. Structural characterization indicates that shells of the hollow spheres are composed of PbS nanoparticles with diameters of about 12 nm. The formation of the hollow nanostructure was explained by a vesicle-template mechanism, in which sonication and surfactant play important roles. Furthermore, uniform silica layers were successfully coated onto the hollow spheres via a modified St?ber method to enhance their performance for promising applications.     

单分散SnO2中空微纳米球的制备和性质

模板法是制备无机中空微纳米球的重要方法之一. 本文以苯乙烯为单体, 通过乳液聚合得到粒径约为620 nm的单分散聚苯乙烯(PS)微球. 以磺化后的聚苯乙烯(PSS)微球为模板, 利用阴阳离子静电吸附作用, 将PSS与前驱体SnSO₄中的Sn²⁺结合. 通过Sn²⁺在乙醇-水介质中的水解作用得到核-壳复合结构, 再经高温煅烧, 得到SnO₂中空微纳米球. 实验对前驱体的浓度、表面活性剂的用量、反应时间及模板选择等方面做了研究,通过扫描电镜(SEM)、X 射线衍射(XRD)、红外(IR) 光谱、热重分析(TGA)、H₂ 程序升温还原(H₂-TPR)、Brunauer-Emmett-Teller (BET)比表面积等技术深入探究SnO₂中空微纳米球的结构, 并对比中空SnO₂与实心粒子的氧化还原特性. BET和H₂-TPR显示将SnO₂制备成微纳米空心球后其比表面积增大, 表面氧空位明显增多, 氧化活性明显提高. 从IR 及XRD推断核-壳结构形成机理, 进而优化出简单合理的实验方案, 获得表面光滑、结构致密, 包覆厚度可控的SnO₂中空微纳米球.     

Immobilization of oxomolybdenum species in a layered double hydroxide pillared by 2,2'-bipyridine-5,5'-dicarboxylate anions

A Zn,Al layered double hydroxide (LDH) with Zn/Al = 1.45 and containing nitrate anions was prepared by coprecipitation and characterized by powder X-ray diffraction, Zn K-edge extended X-ray absorption fine structure spectroscopy (EXAFS), thermogravimetric analysis, FTIR and FT Raman spectroscopy, and (27)Al MAS NMR spectroscopy. Three Zn...O and four Zn...M (M = Zn, Al) shells could be fitted to the low-temperature (40 K) EXAFS spectrum, in accordance with a model for an ordered cationic sheet. The nitrate anions were easily exchanged by 2,2'-bipyridine-5,5'-dicarboxylate anions, resulting in an increase in the basal spacing from 9 to 18 A. The basal spacing of the pillared derivative indicates that the anions are arranged with their longest dimension nearly perpendicular to the host layers. This material exhibits a high encapsulating ability, as evidenced by its interaction with a dichloromethane solution of the dioxomolybdenum(VI) complex MoO(2)Cl(2)(THF)(2). A material with a metal loading of 11.2 wt % was obtained. Molybdenum K-edge EXAFS analysis could not substantiate the formation of a supported complex of the type MoO(2)Cl(2)(N-N) but instead indicated the formation of unidentate-bridged entities of the type [O(2)Mo-O-MoO(2)] with a metal-metal separation of 3.29 A. The molybdenum-containing LDH was active as a catalyst for the liquid-phase epoxidation of cis-cyclooctene, 1-octene, and trans-2-octene using tert-butyl hydroperoxide as the oxygen source, yielding the corresponding epoxides as the only products. For reactions carried out with no additional solvent (other than n-decane) or in the presence of 1,2-dichloroethane, the solid catalyst could be recycled with no major loss of activity. Other tests confirmed that the systems functioned as true heterogeneous catalysts.     

溶剂热方法合成Cu2ZnSnS4空心球

以氯化亚铜,硝酸锌,氯化锡和硫脲作为反应前驱体,聚乙二醇作为模板,利用溶剂热方法合成Cu₂ZnSnS₄中空球。其中,聚乙二醇对于产物的最终形成起到关键作用。文章讨论了Cu₂ZnSnS₄中空球的生长机制,并通过X射线衍射(XRD)、拉曼光谱、场发射电子显微镜(FESEM)、透射电子显微镜(TEM)、X射线能量色散谱(EDX)、X射线光电子谱(XPS)、选区电子衍射谱(SAED)和紫外-可见光分光光度计(UV-Vis)等技术对样品的微结构以及光学性质进行了表征和分析。结果显示Cu₂ZnSnS₄中空球为四方晶体,尺寸为600 nm。其禁带宽度为1.52 eV,适用于制作光伏器件。