Investigations on structural,elastic, thermodynamic and electronic properties of TiN,Ti2N and Ti3N2 under high pressure by first-principles

The lattice parameters, cell volume, elastic constants, bulk modulus, shear modulus, Young's modulus and Poisson's ratio are calculated at zero pressure, and their values are in excellent agreement with the available data, for TiN, Ti₂N and Ti₃N₂. By using the elastic stability criteria, it is shown that the three structures are all stable. The brittle/ductile behaviors are assessed in the pressures from 0 GPa to 50 GPa. Our calculations present that the performances for TiN, Ti₂N and Ti₃N₂ become from brittle to ductile with pressure rise. The Debye temperature rises as pressure increase. With increasing N content, the enhancement of covalent interactions and decline of metallicity lead to the increase of the micro-hardness. Their constant volume heat capacities increase rapidly in the lower temperature, at a given pressure. At higher temperature, the heat capacities are close to the Dulong–Petit limit, and the heat capacities of TiN and Ti₂N are larger than that of c-BN. The thermal expansion coefficients of titanium nitrides are slightly larger than that of c-BN. The band structure and the total Density of States (DOS) are calculated at 0 GPa and 50 GPa. The results show that TiN and Ti₂N present metallic character. Ti₃N₂ present semiconducting character. The band structures have some discrepancies between 0 GPa and 50 GPa. The extent of energy dispersion increases slightly at 50 GPa, which means that the itinerant character of electrons becomes stronger at 50 GPa. The main bonding peaks of TiN, Ti₂N and Ti₃N₂ locate in the range from −10 to 10 eV, which originate from the contribution of valance electron numbers of Ti s, Ti p, Ti d, N s and N p orbits. We can also find that the pressure makes that the total DOS decrease at the Fermi level for Ti₂N. The bonding behavior of N–Ti compounds is a combination of covalent and ionic nature. As N content increases, valence band broadens, valence electron concentration increases, and covalent interactions become stronger. This is reflected in shortening of Ti–N bonds.     

Synthesis and visible light photocatalysis water splitting property of chromium-doped Bi4Ti3O12

Photocatalysts Bi₄Ti_3 ? xCr_xO₁₂(x = 0.00, 0.06, 0.15, 0.30, 0.40, and 0.50) with perovskite structure were synthesized by sol–gel method and their electronic structures and photocatalytic activities were investigated. The Bi₄Ti_2.6Cr_0.4O₁₂ photocatalyst exhibited the highest performance of H₂ evolution in methanol aqueous solution (58.1 μmol h^? 1 g^? 1) under visible light irradiation (λ > 400 nm) without a co-catalyst, whereas no H₂ evolution is observed for Bi₄Ti₃O₁₂ under the same conditions. The UV–vis spectra indicated that the Bi₄Ti_2.6Cr_0.4O₁₂ had strong photoabsorption in the visible light region. The results of density functional theory (DFT) calculation illuminate that the conduction bands of Bi₄Ti₃O₁₂ are mainly attributable to the Ti 3d + Bi 6p orbitals, and the valence bands are composed of O 2p + Bi 6s hybrid orbitals, while the conduction bands of chromium-doped Bi₄Ti₃O₁₂ are mainly attributable to the Ti 3d + Bi 2p + Cr 3d orbitals, and the O 2p + Cr 3d hybrid obitals are the main contribution to the valence band.     

Oxygen-rich Ti1−xO2 pillar growth at a gold nanoparticle–TiO2 contact by O2 exposure

In-situ gas-injection transmission electron microscopy revealed that a pillar grew at the edge of the interface of a gold nanoparticle and a TiO₂ substrate during exposure to O₂ gas at 100 Pa. The pillar was found to have a titanium-deficient chemical composition of Ti_1 ? xO₂ (x > 0) by electron energy loss spectroscopy (EELS). The spectra showed a chemical shift of oxygen and titanium ions to have ionic states of Ti³⁺ and O^y? (y < 3/2). The formation of the Ti_1 ? xO₂ at the contact edge of gold–Ti_1 ? xO₂ interface is discussed from the perspective of an O₂ affinity, which plays an important role in CO oxidation process of supported gold particle.     

Effect of Ti4+ ions doping on microstructure and dc resistivity of nickel ferrites

Nanostructured nickel ferrites (NiFe₂O₄) were prepared by doping with Ti⁴⁺ ions using solid-state reaction route. Lowest grain size of 55 nm was achieved in the specimens with 20 mole% TiO₂ doping. Magnetization in the specimens decreases with decreasing grain sizes. Lower volume fractions of ferrite phase due to dissociation of the magnetic phase into smaller particles by the disruption of super exchange interaction by the titanium substitution results a decrease in magnetizations. Coercivity showed an increasing trend. This was explained as arising due to multidomain/monodomain magnetic behavior of magnetic nanoparticles. Small polaron hopping conduction between Fe²⁺ and Fe³⁺ sites controls the dc electrical properties of the specimens. The presence of an interfacial amorphous phase between the sites is evident from Mott's analysis. Specimens containing 10 mole or more TiO₂ and sintered at 1350 °C contain NiTiO₃ as a secondary phase and show unusual dc conductivity.     

One step ultrafast mechanosynthesis of nanocrystalline cubic Ti0.9Al0.1B and its microstructure evolution

Nanocrystalline single phase cubic Ti_0.9Al_0.1B has been prepared at room temperature in a minimum duration of 4 h by mechanical alloying the stoichiometric mixture of Ti, Al and B powders in a high energy planetary ball mill under argon atmosphere. The Rietveld's structure refinement of X-ray diffraction data reveals that cubic Ti–Al–B phase is initiated just after 1 h of milling and at the same time α-Ti (hcp) phase partially transforms to metastable β-Ti (bcc) phase. In the course of milling, ordered Ti–Al–B lattice gradually transforms to a distorted state and the degree of distortion increases with milling time up to 15 h. The formation of cubic Ti_0.9Al_0.1B is also confirmed from the selected area electron diffraction (SAED) pattern. Microstructure characterization by high resolution transmission electron microscopy (HRTEM) reveals that Ti–Al–B nanoparticles are isotropic in nature with average particle size ~4.5 nm and is in good agreement with the value obtained from the Rietveld analysis of X-ray diffraction data.     

The unusual variations of photoluminescence and afterglow properties in monoclinic ZrO2 by annealing

The raw ZrO₂ is annealed at 600–1550 °C for 6 h. It is found that the emission at 492 nm increases greatly when the annealing temperature is higher than 1200 °C and its afterglow shows a small improvement at 1200–1450 °C and a large enhancement after annealing at 1550 °C. The results that are obtained indicate that the impurity Ti⁴⁺ in ZrO₂ is efficiently reduced to Ti³⁺ when the temperature is higher than 1200 °C, and the increase of Ti³⁺ centers contributes to the large improvement of emission at 492 nm. The thermoluminescence shows that at least two types of traps with different depths (0.65 eV and 1.46 eV) corresponding to oxygen vacancies exist in monoclinic ZrO₂. After annealing at 1200–1450 °C, some new trap clusters related to oxygen vacancies and Ti³⁺ form and causes the small improvement of afterglow at 1200–1450 °C. The large improvement of afterglow after annealing at 1550 °C originates from the sharp increase of proper shallow traps (0.65 eV) in ZrO₂. Accordingly, we present the feasible interpretations and luminescence mechanisms of monoclinic ZrO₂ for our observations.     

Oxidation of ultra-thin Ti films on Mo(100): Soft X-ray photoelectron spectroscopy study

Titanium oxide films grown on Mo(100) have been investigated by low-energy electron diffraction (LEED) and soft X-ray photoelectron spectroscopy (PES). The film was grown by Ti deposition on Mo(100) and subsequent oxidation of the film by 12 L of O₂ exposure at room temperature. As the film was annealed at 700–1000 °C, the film in which the Ti atoms were in a Ti³⁺ oxidation state was formed. As the film was annealed at 1100–1500 °C, the oxidation state of Ti in the film was converted to Ti²⁺. The valence electronic structure of the film was measured under the condition that the emission from the Mo substrate was minimized due to a Cooper minimum of the Mo 4 d photoionization cross sections (hν = 100 eV). It was found that the Ti 3 d band in normal-emission spectra was increased in intensity when the film was annealed at 1100–1500 °C. As the film was annealed at 1300 °C for 10 s and 20 s, the film-covered Mo(100) gave (2 × 2) and (4 × 1) LEED patterns, respectively. The two-dimensional band structure of the (2 × 2) system was investigated by angle-resolved PES, and it was found that the film with a (1 × 1) periodicity with respect to the Mo(100) substrate existed in the (2 × 2) system.     

Microwave synthesis of nitrogen doped Ti4O7 for photocatalytic applications

The nitrogen (N) doped Ti₄O₇ photocatalyst was prepared from urea as a nitrogen source by a microwave method. The resulting photocatalyst was characterized by X-ray diffraction (XRD), Field Emission Scanning electron microscopy (FESEM), Fourier transform infrared spectroscopy (FTIR), UV–visible diffuse reflectance spectroscopy (UV–Vis DRS) and UV–vis spectroscopy (UV–Vis). 0.1 M N doped Ti₄O₇ photocatalyst exhibited methylene blue decomposition efficiency of 100% which was prepared by microwave treatment for above 30 min. Rate constant was found to be 0.028910 min⁻¹ in the first order kinetic.     

Effects of composition and frozen-in conditions on bulk and grain boundary conductivities of Yb2Ti2O7-based materials

The present work provides a comprehensive interpretation of factors which affect cation and/or anion disordering in Yb₂Ti₂O₇-based materials, and their effects on transport properties. It also provides guidelines for further improvements of transport properties. Powder processing and thermal history may play major roles, especially when anti-site cation exchange is likely to occur at typical sintering temperatures, as confirmed by structural refinement. One found that the cooling rate may also determine changes in frozen-in conditions. Excessive sintering temperatures affect both the bulk and grain boundary properties of samples with composition Yb₂Ti₂O₇; this was ascribed to the formation of a Ti-rich amorphous phase, and corresponding excess of Yb in the bulk phase. Anti-site occupancy of B-site positions was found to affect ionic conductivity, as demonstrated for conditions that cause cation heterogeneities in Yb₂Ti₂O₇, and also by analysing conductivity data for compositions with excess of Yb. The conductivity data obtained for Yb_2 + xTi_2 ? xO_7 ? d become less dependent on sample preparation, possibly because deliberate composition changes play a prevailing role, compared to intrinsic cationic and anionic disorders. Samples with slight excess of Ti retain prevailing ionic conductivity, which differs significantly from the effects of a typical donor additive on ionic and electronic conductivities.     

Preparation of phase pure and well-crystallized Li4Ti5O12 nanoparticles by precision control of starting mixture and calcining at lowest possible temperatures

In an attempt to obtain spinel Li₄Ti₅O₁₂ with smallest possible grain size and highest possible phase purity via a solid state route, we tried to elevate reactivity of the reactant mixture by mechanical activation and appropriate choice of the starting materials. From the stoichiometric mixture comprising Li₂CO₃ and 150 nm anatase, we needed to heat at 950 °C for 1 h to obtain 81–88% phase purity (PhP) of Li₄Ti₅O₁₂ with its average grain size ca 600 nm. After mechanical activation with a multi-ring mill for 30 min, 850 °C was enough to obtain 85–87% pure 500 nm spinel. From a combination of LiNO₃ and 50 nm anatase, 90–91% phase pure product with its grain size 240 nm was obtained at 750 °C due to fusion of the nitrate and shorter diffusion path. By using CH₃COOLi.2H₂O and 50 nm anatase we obtained 130 nm Li₄Ti₅O₁₂ with its PhP ca 90% by milling the mixture preliminarily calcined at 500 °C for 1 h and heating subsequently at 700 for 1 h.     

High room-temperature pyroelectric response of MgO-modified Pb0.99(Zr0.95Ti0.05)0.98Nb0.02O3 ceramics

The dielectric and pyroelectric responses of MgO-modified Pb_0.99(Zr_0.95Ti_0.05)_0.98Nb_0.02O₃ ceramics were investigated near F_R(LT)–F_R(HT) phase transition. It was found that MgO additive reduced the F_R(LT)–F_R(HT) phase transition temperature from 41 °C to room temperature (24 °C). Superior room-temperature pyroelectric properties were obtained in the composition of 0.10 wt% MgO addition without DC bias. The largest pyroelectric coefficient, 65 × 10⁻⁸ C cm⁻² K⁻¹, was detected. Accordingly, the detectivity figures of merit F_d had maximum values of 20 × 10⁻⁵ Pa^−1/2, and especially the voltage responsivity F_v = 0.91 m²C⁻¹ is the highest value reported so far among all pyroelectric materials. It shows promising potential for application in uncooled pyroelectric infrared detector.     

Structural,magnetic and electrical study of nano-structured α-Fe1.4Ti0.6O3

Nano-structured α-Fe_1.4Ti_0.6O₃ has been synthesized using a simple technique of mechanical alloying. Doping of Ti atoms into α-Fe₂O₃ structure has been characterized by XRD, SEM-EDX, FTIR, VSM and impedance spectroscopy. Magnetic and electrical studies have revealed important changes at the interfaces of grains and grain boundaries, and at rhombohedral planes during formation of α-Fe_1.4Ti_0.6O₃ alloy. The alloy has shown the properties of ferromagnetic semiconductor with substantial increase of magnetic moment and electrical conductivity with the decrease of grain size. The 100 h milled sample has been air annealed to study the effects of thermal activated grain size, lattice structure, magnetism and electrical properties. This work has demonstrated some recent issues of the synthesis of ferromagnetic semiconductor, e.g., structural phase stability, grain size effects, magnetic ordering and electrical conductivity at different stages of the mechanical alloying and subsequent annealing at 700 °C.     

A single-crystal study of the electrochemically Li-ion intercalated spinel-type Li4Ti5O12

Single crystals of Li_4 + xTi₅O₁₂ were prepared by means of electrochemical Li-ion intercalation technique using parent Li₄Ti₅O₁₂ single crystals. The obtained Li_4 + xTi₅O₁₂ (x = 1.35) crystallizes in the cubic spinel-related type structure, space group Fd3?m, and lattice parameters of a = 8.346(2) Å and V = 581.3(5) Å³ and Z = 8. The Li-ion intercalated sites were successfully determined to be both the 8a and 16c sites by using the difference Fourier synthesis map. The structure was determined by single-crystal X-ray structure analysis and refined to the conventional value of R = 3.7% for 132 independent observed reflections. The chemical composition has been determined to be Li_5.35Ti₅O₁₂ from the result of site-population refinements. In addition, theoretical electron density distributions and total energy were calculated for three postulated compounds of “Li_4.5Ti_4.5O₁₂” and “Li_4.5 + xTi_4.5O₁₂” with x = 1.5 and 3.0.     

Magnetic properties and formation of Sr ferrite nanoparticle and Zn,Ti/Ir substituted phases

Strontium hexaferrite nanoparticles are prepared by the chemical sol–gel route. Specific saturation magnetization σ_s and coercive field strength H_c are determined depending on the heat treatment of the gel and iron/strontium ratio in the starting solution. These ultrafine powders with single-domain behavior have specific saturation magnetization σ_s=74 emu/g and coercive field strength H_c=6.4 kOe. Experimental results show that it is necessary to preheat the gel between 400 and 500°C for several hours . It can prevent the formation of intermediate γ-Fe₂O₃ and help to obtain ultrafine strontium ferrite single phase with narrow size distribution at a low annealing temperature. Additionally, the magnetic properties of sol–gel derived strontium ferrite with iron substituted by Zn²⁺, Ti⁴⁺ and Ir⁴⁺ are discussed. For an amount of substitution 0<x⩽0.6, the (Zn, Ti)_x substituted strontium ferrite shows higher values of both coercive field strength and saturation magnetization than the (Zn, Ir)_x substituted phase.     

Theoretical study of the (110) surface of Sn1 - xTixO2 solid solutions with different distribution and content of Ti

The composition and thermodynamic stability of the (110) surface of Sn_1 - xTi_xO₂ rutile solid solutions was investigated as a function of Ti-distribution and content up to the formation of a full TiO₂ surface monolayer. The bulk and (110) surface properties of Sn_1 - xTi_xO₂ were compared to that of the pure SnO₂ and TiO₂ crystal. A large supercell of 720 atoms and a localized basis set based on the Gaussian and plane wave scheme allowed the investigation of very low Ti-content and symmetry. For the bulk, optimization of the crystal structure confirmed that up to a Ti-content of 3.3 at.%, the lattice parameters (a, c) of SnO₂ do not change. Increasing further the Ti-content decreased both lattice parameters down to those of TiO₂. The surface energy of these solid solutions did not change for Ti-substitution in the bulk of up to 20 at.%. In contrast, substitution in the surface layer rapidly decreased the surface energy from 0.99 to 0.74 J/m² with increasing Ti-content from 0 to 20 at.%. As a result, systems with Ti atoms distributed in the surface (surface enrichment) had always lower energies and thus were thermodynamically more favorable than those with Ti homogeneously distributed in the bulk. This was attributed to the lower energy necessary to break the TiO bonds than SnO bonds in the surface layer. In fact, distributing the Ti atoms homogeneously or segregated in the (110) surface led to the same surface energy indicating that restructuring of the surface bond lengths has minimal impact on thermodynamic stability of these rutile systems. As a result, a first theoretical prediction of the composition of Sn_1 - xTi_xO₂ solid solutions is proposed.     

Small silver clusters at paramagnetic defects of silica surfaces: A density functional embedded-cluster study

We studied the interaction of small Ag_n clusters (n = 1–4) with paramagnetic defect centers of a dehydroxylated silica surface using an all-electron scalar relativistic density functional method. The surface and adsorption complexes on it were modeled with an accurate quantum mechanics/molecular mechanics (QM/MM) scheme of embedding QM clusters in an elastic polarizable environment, described at the molecular mechanics level (MM). We analyzed two types of frequent point defects as sites for trapping and growing of Ag clusters: a silicon atom with a dangling bond (E′ center), ≡ Si?, and a non-bridging oxygen center (NBO), ≡ Si–O?. The Ag clusters interact with these paramagnetic centers forming strong covalent metal-defect bonds. The high adsorption energy allows one to consider the NBO and E′ sites as traps of single Ag atoms and as centers of cluster growth. We also explored the effect of adsorption on observable electronic properties of the silver clusters and of the defects of the silica surface.     

Quantum dots of Cd0.5Mn0.5Te semimagnetic semiconductor formed by the cold isostatic pressure method

Cd_0.5Mn_0.5Te is a semimagnetic semiconductor, which crystallizes in the zinc-blende structure (ZB) and exhibits a magnetic spin glass like transition at 21 K. Under pressure it shows a first-order phase transition around 2.6 GPa to the NaCl like structure. In this work, the pressure cycled method using a Paris–Edinburgh cell up to 8 GPa has been applied to Cd_0.5Mn_0.5Te samples in order to obtain recovered nanocrystals. The nanoparticles have been characterized by EDX and electron microscopy. The X-ray and electron diffraction results confirmed the existence of nanocrystals in the ZB phase with an average size of 7 nm. Magnetization measurements made in the range of 2–300 K at low field show that the temperature of the magnetic transition decreases when the crystallites’ size is reduced.     

Influence of Cu doping on the microstructure,optical properties and photoluminescence features of Cd0.9Zn0.1S nanoparticles

Cd_0.9−xZn_0.1Cu_xS (0≤x≤0.06) nanoparticles were successfully synthesized by a conventional chemical co-precipitation method at room temperature. Crystalline phases and optical absorption of the nanoparticles have been studied by X-ray diffraction (XRD) and UV–visible spectrophotometer. XRD confirms the phase singularity of the synthesized material, which also confirmed the formation of Cd–Zn–Cu–S alloy nanocrystals rather than separate nucleation or phase formation. Elemental composition was examined by the energy dispersive X-ray analysis and the microstructure was examined by scanning electron microscope. The blue shift of absorption edge below Cu=2% is responsible for dominance of Cu⁺ while at higher Cu concentration dominated Cu²⁺, d–d transition may exist. It is suggested that the addition of third metal ion (Cu²⁺/Cu⁺) is an effective way to improve the optical property and stability of the Cd_0.9Zn_0.1S solid solutions. When Cu is introduced, stretching of Cd–Zn–Cu–S bond is shifted lower wave number side from 678 cm⁻¹ (Cu=0%) to 671 cm⁻¹ (Cu=6%) due to the presence of Cu in Cd–Zn–S lattice and also the size effect. The variation in blue band emission peak from 456 nm (∼2.72 eV) to 482 nm (∼2.58 eV) by Cu-doping is corresponding to the inter-band radiation combination of photo-generated electrons and holes. Intensity of red band emission centered at 656 nm significantly increased up to Cu=4%; beyond 4% it is decreased due to the quenching of Cu concentration.     

First-principles study of small palladium clusters on NiAl(1 1 0) alloy surface

Theoretical calculations focused on the geometry, stability, electronic and magnetic properties of small palladium clusters Pd_n (n=1–5) adsorbed on the NiAl(1 1 0) alloy surface were carried out within the framework of density functional theory (DFT). In agreement with the experimental observations, both Ni-bridge and Al-bridge sites are preferential for the adsorption of single palladium atom, with an adsorption energy difference of 0.04 eV. Among the possible structures considered for Pd_n (n=1–5) clusters adsorbed on NiAl(1 1 0) surface, Pd atoms tend to form one-dimensional (1D) chain structure at low coverage (from Pd₁ to Pd₃) and two-dimensional (2D) structures are more stable than three-dimensional (3D) structures for Pd₄ and Pd₅. Furthermore, metal-substrate bonding prevails over metal–metal bonding for Pd cluster adsorbed on NiAl(1 1 0) surface. The density of states for Pd atoms of Pd/NiAl(1 1 0) system are strongly affected by their chemical environment. The magnetic feature emerged upon the adsorption of Pd clusters on NiAl(1 1 0) surface was due to the charge transfer between Pd atoms and the substrate. These findings may shade light on the understanding of the growth of Pd metal clusters on alloy surface and the construction of nanoscale devices.