Surface alloy formation,short-range order,and deuterium adsorption properties of monolayer PdRu/Ru(0 0 0 1) surface alloys

The formation and structure of monolayer PdRu/Ru(0 0 0 1) surface alloys and their adsorption properties with respect to deuterium adsorption were investigated by atomic resolution scanning tunneling microscopy and by temperature programmed desorption. Surface alloys, prepared by deposition of up to one monolayer of Pd and flash annealing to 1150 K show (i) negligible loss of Pd by desorption or diffusion into the Ru bulk during this procedure and (ii) dominant phase separation into 2D Pd and Ru islands, in contrast to the random distribution in PtRu/Ru(0 0 0 1) surface alloys [H.E. Hoster, A. Bergbreiter, P.M. Erne, T. Hager, H. Rauscher, R.J. Behm, Phys. Chem. Chem. Phys. 10 (2008) 3812]. 2D short-range order parameters and the abundance of specific adsorption ensembles were evaluated for different Pd contents, effective pair interaction (EPI) energies were derived from Monte Carlo simulations. Deuterium adsorption on Pd monolayer films shows a pronounced weakening of adsorption bond, which is attributed to compressive strain and metal–metal interactions between Pd and underlying Ru atoms (‘vertical ligand effect’). Mixed adsorption ensembles containing both Pd and Ru atoms give rise to D₂ desorption in the intermediate temperature regime. The impact of the specific lateral distribution of the two metal species on the chemical surface properties is illustrated by comparison with deuterium adsorption on dispersed PtRu/Ru(0 0 0 1) surface alloys [T. Diemant, H. Rauscher, R.J. Behm, J. Phys. Chem. C 112 (2008) 8381].     

Interaction of atomic H and CO with Cu(1 1 0) and bimetallic Ni/Cu(1 1 0)

Co-adsorption of hydrogen and CO on Cu(1 1 0) and on a bimetallic Ni/Cu(1 1 0) surface was studied by thermal desorption spectroscopy. Hydrogen was exposed in atomic form as generated in a hot tungsten tube. The Ni/Cu surface alloy was prepared by physical vapor deposition of nickel. It turned out that extended exposure of atomic hydrogen leads not only to adsorption at surface and sub-surface sites, but also to a roughening of the Cu(1 1 0) surface, which results in a decrease of the desorption temperature for surface hydrogen. Exposure of a CO saturated Cu(1 1 0) surface to atomic H leads to a removal of the more strongly bonded on-top CO (α₁ peak) only, whereas the more weakly adsorbed CO molecules in the pseudo threefold hollow sites (α₂ peak) are hardly influenced. No reaction between CO and H could be observed. The modification of the Cu(1 1 0) surface with Ni has a strong influence on CO adsorption, leading to three new, distinct desorption peaks, but has little influence on hydrogen desorption. Co-adsorption of H and CO on the Ni/Cu(1 1 0) bimetallic surface leads to desorption of CO and H₂ in the same temperature regime, but again no reaction between the two species is observed.     

H2S dissociation on the Fe(1 0 0) surface: An ab initio molecular dynamics study

The adsorption of H₂S on Fe(1 0 0) is examined using ab initio molecular dynamics at 298 and 1808 K. Dissociation of H₂S occurs at both temperatures simulated, to leave adsorbed S and two H atoms. The dissociation occurs via a two step process and the mechanism is found to be different depending on the temperature of the reaction. At 1808 K, diffusion of the dissociated H atoms into the subsurface region is also observed.     

Adsorption of Xe atoms on the TiO2(1 1 0) surface: A density functional study

The interaction of xenon atoms with the TiO₂(1 1 0) surface of rutile has been studied by density functional theory methods. Five different possible adsorption sites on the relaxed and clean TiO₂(1 1 0) surface and on two different type of oxygen vacancies possible on this oxide substrate have been considered. In the case of the defect-free substrate, and when compared with a previous study concerning the adsorption of Ar atoms also on TiO₂(1 1 0), the xenon atom, as a larger and easier polarizable species, is shown to have a deeper physisorption well, as expected. Likewise, Xe atoms prefer to be bounded to positions nearby the outermost titanium atoms as found previously for Ar. This is in agreement with most studies concerning rare gases adsorbed on transition metal surfaces. In the case of the reduced surfaces, it is found that the interaction is more favourable in the protruding rows. The interaction is dominated by dispersion forces and DFT + dispersion energies are 3.5–5 times larger than the non-corrected DFT values and Xe-surface distances are smaller. Finally, an interesting correlation is obtained for the calculated interaction energies and the Xe–Ti distance.     

Reactivity of the Cu2O(1 0 0) surface: Insights from first principles calculations

We present a summary of results of systematic first principles calculations of the electronic and geometric structures of the Cu₂O(1 0 0) surface and the process of CO oxidation on this surface (energetics and pathways of adsorption, diffusion and reactions of CO and O₂ on the surface). The (p, T) phase diagram of the Cu₂O(1 0 0) in equilibrium of with gas phase O₂ built using the ab initio thermodynamics approach suggests that the O-terminated surface is preferred over the Cu-terminated one within the entire ranges of pressures and temperatures in which the compound exists. Metastable Cu-terminated Cu₂O(1 0 0) is found to undergo a surface reconstruction in agreement with experiment. We find CO to oxidize spontaneously on the O-terminated Cu₂O(1 0 0) surface by consuming surface O atoms. Our calculations also show that the surface O-vacancies left in the course of the CO oxidation can be easily filled with dissociative adsorption of the gas phase O₂ molecules, which are usually present in reaction environment.     

Density functional calculations for Ni adsorption on Al(1 1 0)

The adsorption of 0.25, 0.5 and 1 monolayer (ML) of the transition metal Ni on the metal substrate Al(1 1 0) was studied using first-principles calculations at the level of density functional theory. The metal–metal system was analyzed with the generalized gradient approximation. Four stable atomic configurations were considered, and the optimized geometries and adsorption energies of different Ni adsorption sites on the Al(1 1 0) surface at selected levels of coverage were calculated and compared. The four-fold hollow site was determined to be the most stable adsorption site with adsorption energy of 5.101 eV at 0.25 ML, 3.874 eV at 0.5 ML and 3.665 eV at 1 ML. The adsorption energies of the four sites slightly decreased as the Ni coverage increased. Work function analysis showed that when Ni is adsorbed on the Al(1 1 0) surface, the work function decreased as the coverage increased due to depolarization. The Mulliken population and density of states were calculated to determine the charge distribution of the adsorption site, confirming that a chemisorption interaction exists between the adsorbed Ni atom and Al(1 1 0) surface atoms.     

An investigation of the effect of pre-dosed O atoms on the adsorption of NO on Pt{2 1 1}

Reflection absorption infrared spectroscopy (RAIRS) and temperature programmed desorption (TPD) have been used to investigate the effect of pre-dosed O atoms on the adsorption of NO on Pt{2 1 1} at room temperature. RAIRS experiments show that no new species are formed when NO is adsorbed onto a Pt{2 1 1} surface that has been pre-dosed with oxygen and no species are lost from the spectra, compared to spectra recorded for NO adsorption on the clean Pt{2 1 1} surface. However pre-dosed oxygen atoms do influence the frequency and intensity of several of the observed infrared bands. In stark contrast, pre-dosed O has a large effect on the TPD spectra. In particular N₂ and N₂O desorption, seen following NO adsorption on the clean Pt{2 1 1} surface, is completely inhibited. This effect has been assigned to the blocking of NO dissociation by the pre-adsorbed O atoms. A new NO desorption peak, not seen for NO adsorption on the clean Pt{2 1 1} surface, is also observed in TPD spectra recorded following NO adsorption on an oxygen pre-dosed Pt{2 1 1} surface.     

Metallization of Ge(0 0 1)-p(2 × 1) surface as result of thermal fluctuations

We present a theoretical study of the metallization of Ge(0 0 1)-p(2 × 1) surface which is observed in experimental data. We have considered the connection between thermal fluctuation of this surface structure and its metallic properties. To this end we have performed long-time MD-DFT simulations. The obtained results show that thermal fluctuation of the Ge(0 0 1)-p(2 × 1) structure may cause its metallization which in not necessary connected with a flip-flop motion of dimer atoms. It was shown that the metallization of the Ge(0 0 1)-p(2 × 1) surface takes place when the dimer buckling angle is reduced to around 11°. In the case of our simulations the considered surface system remained in the metallic state for 25% of the simulation time. We have also found that the metallic state of the fluctuating Ge(0 0 1)-p(2 × 1) surface is built up by dangling bonds of the dimer atoms shifted up (D_up) and down (D_down).     

Hydrogen adsorption on palladium and palladium hydride at 1 bar

The dissociative sticking probability for H₂ on Pd films supported on sputtered Highly Ordered Pyrolytic Graphite (HOPG) has been derived from measurements of the rate of the H–D exchange reaction at 1 bar. The sticking probability for H₂, S, is higher on Pd hydride than on Pd (a factor of 1.4 at 140 °C), but the apparent desorption energy derived from S is the same on Pd and Pd hydride within the uncertainty of the experiment. Density Functional Theory (DFT) calculations for the (1 1 1) surfaces of Pd and Pd hydride show that, at a surface H coverage of a full mono layer, H binds less strongly to Pd hydride than to Pd. The activation barrier for desorption at a H coverage of one mono layer is slightly lower on Pd hydride, whereas the activation energy for adsorption is similar on Pd and Pd hydride. It is concluded that the higher sticking probability on Pd hydride is most likely caused by a slightly lower equilibrium coverage of H, which is a consequence of the lower heat of adsorption for H on Pd hydride.     

Acetaldehyde photochemistry on TiO2(1 1 0)

The ultraviolet (UV) photon induced decomposition of acetaldehyde adsorbed on the oxidized rutile TiO₂(1 1 0) surface was studied with photon stimulated desorption (PSD) and thermal programmed desorption (TPD). Acetaldehyde desorbs molecularly from TiO₂(1 1 0) with minor decomposition channels yielding butene on the reduced TiO₂ surface and acetate on the oxidized TiO₂ surface. Acetaldehyde adsorbed on oxidized TiO₂(1 1 0) undergoes a facile thermal reaction to form a photoactive acetaldehyde–oxygen complex. UV irradiation of the acetaldehyde–oxygen complex initiated photofragmentation of the complex resulting in the ejection of methyl radical into gas phase and conversion of the surface bound fragment to formate.     

Adsorption of molecular SiO2 on a clean Si(1 0 0) surface

We have investigated the adsorption of molecular (gaseous) SiO₂ on a clean Si(1 0 0) p(2 × 2) reconstructed surface using density functional theory based methods. The SiO₂ molecule is found to be chemisorbed on various sites on the Si surface and the most energetically favourable structure is on top of the dimers. The minimum energy pathways for the various adsorption channels indicate that the reaction is barrierless in all cases. The corresponding vibrational spectrum is also calculated and the adsorbed molecules are, as expected, found to have red-shifted vibrational frequencies. The energetically favourable adsorption sites and adsorption energies are comparable to the results found for SiO.     

Epitaxial alloyed films out of the bulk stability domain: Surface structure and composition of Ni3Al and NiAl films on a stepped Ni(1 1 1) surface

We have studied by Spot Profile Analysis Low Energy Electron Diffraction (SPA-LEED) and Auger Electron Spectroscopy (AES) Ni–Al alloyed layers formed by annealing, around 780 K, Al deposits on a stepped Ni(1 1 1) surface. The surface structure and composition of the thin epitaxial Ni₃Al and NiAl films, obtained respectively below and above a critical Al initial coverage θ_c, differ markedly from those of corresponding bulk alloys.The Ni₃Al ordered films form in a concentration range larger than the stability domain of the L1₂ Ni₃Al phase. The NiAl films present a marked distortion with respect to the lattice unit cell of the B2 NiAl phase, which slowly decreases when the film thickness increases.It also appears that the value of θ_c depends on the morphology of the Ni(1 1 1) substrate, increasing from θ_c = 4.5 ML for a flat surface to θ_c = 10 ML for a surface with a miscut of 0.4°. This could be directly related to the presence of steps, which favour Ni–Al interdiffusion.     

Surface structure and composition of Pd8Ni92(1 1 1): A dynamic LEED study

The Pd₈Ni₉₂(1 1 1) surface was studied using low-energy electron diffraction (LEED). IV spectra collected close to normal incidence were analysed by dynamical tensor LEED. Composition and interlayer spacings were determined for first four atomic layers. The surface slab is found to be enriched in Pd (30% in total against 8% in bulk) but this extra palladium is irregularly distributed over the four topmost layers. Contrary to previous reports, the palladium amount, as compared to the bulk, is not significantly changed in the surface layer and it is enriched to 20% only in the third layer. The detected contractions of interlayer spacings are all but one (d₃₄) within the error limits of no contraction at all. We also discuss some aspects of correlations between the fit parameters.     

Entropy-driven adsorption of carbon nanotubes on (0 0 1) and (1 1 1) surfaces of CeO2 islands grown on sapphire substrate

According to the aim to compose combinatorial material by adsorption of carbon nanotubes onto the structured CeO₂ surface the interaction of the armchair (5,5) and zigzag (8,0) nanotubes with the (0 0 1) and (1 1 1) surfaces of CeO₂ islands have been investigated by theoretical methods. The thermodynamics of the adsorption were studied at the low surface coverage region. The interaction energy between the nanotube and the different CeO₂ surfaces shows significant increase when the size of the interface reaches 7–8 unit cells of CeO₂ and it remains unchanged in the larger interface region. However, the entropy term of the adsorption is significantly high when the distances of CeO₂ islands are equal to 27 nm (adsorption of armchair (5,5) nanotube) or 32 nm (adsorption of zigzag (8,0) nanotube). This property supports adsorption of nanotubes onto CeO₂ surfaces which possesses a very specific surface morphology. A long-wave vibration of nanotubes was identified as background of this unexpected phenomenon. This observation could be applicable in the development of such procedures where the nanotube adsorption parallel to the surface is aimed to perform.     

Oxygen adsorption and surface segregation in (2 1 1) surfaces of Pt(shell)/M(core) and Pt3M (M = Co,Ir) alloys

Density functional theory is used to study oxygen adsorption and its effect on surface segregation in (2 1 1) surfaces of Pt(shell)/M(core) and Pt₃M (M = Co, Ir) alloys. It is found that the most energetically favorable oxygen adsorption site is the bridge site over and parallel to the (1 0 0) step. Surface segregation phenomena is observed in Pt₃Co, Pt₃Ir and Pt/Co(core) systems. The Pt/Ir(core) structure was the only one, among the studied systems, that showed antisegregation behavior even in presence of oxygen adsorbed.     

Interaction of NO with the O-rich RuO2(1 1 0) surface at 300 K

The interaction of NO with the O-rich RuO₂(1 1 0) surface, exposing coordinatively unsaturated O-bridge, O-cus, and Ru-cus atoms, was studied at 300 K by thermal desorption spectroscopy (TDS) and high-resolution electron energy-loss spectroscopy (HREELS). The conclusions are validated by isotope substitution experiments with ¹⁸O. During exposure to NO an O···N–O surface group (NO₂-cus) is formed with O-cus. Additionally, a smaller number of empty Ru-cus sites are filled by NO-cus. If one warms the sample to 400 K, NO₂-cus does not desorb but decomposes into O and NO again, the latter being either released into gas phase or adsorbed as NO-cus. With O-bridge such a surface group is not stable at 300 K. Our experiments further prove that O-cus is more reactive than O-bridge.     

Observation of hydrogen adsorption on 6H-SiC(0 0 0 1) surface

We have used coaxial impact-collision ion scattering spectroscopy (CAICISS) and time-of-flight elastic recoil detection analysis (TOF-ERDA) to investigate the adsorption of atomic hydrogen on the 6H-SiC(0 0 0 1)√3×√3 surface. It has been found that the saturation coverage of hydrogen on the 6H-SiC(0 0 0 1)√3×√3 surface is about 1.7 ML. Upon saturated adsorption of atomic hydrogen, the √3×√3 surface structure changes to the 1×1 structure. The data of the CAICISS measurements have indicated that as a result of the hydrogen adsorption, Si adatoms on the √3×√3 surface move from T₄ to on-top sites.     

Ab initio study of structural and magnetic properties of cubic Fe4N(0 0 1) surface

First-principles calculations are employed to study the structural and magnetic properties of fully-relaxed cubic Fe₄N(0 0 1) surfaces with both Fe₂- and Fe₂N-termination. The results of surface stability calculations show that the (0 0 1) surface of Fe₄N is most possibly existing with Fe₂N-termination. Slab structures have more localized features in the density of states especially for the Fe₂N-terminated surface due to structure relaxation. The average magnetic moments of Fe atoms increase with increasing thickness of slabs. The calculated interlayer distances indicate that the decreases of d₁₂ and d₂₃ result in stronger hybridization and shorter bond distances between Fe2 atom in the second layer and other atoms in surface or the third layers, which lead to variation of magnetic moments with different slab thicknesses.     

Computational study of the adsorption of dimethyl methylphosphonate (DMMP) on the (0 1 0) surface of anatase TiO2 with and without faceting

The adsorption of dimethyl methylphosphonate (DMMP) on the (0 1 0) surface of anatase TiO₂, which is isostructural with the (1 0 0), has been studied using density functional theory and two-dimensionally-periodic slab models. The experimentally-observed faceting of this surface has, for the first time, been included in the modeling. The relaxations of bare surfaces both with and without faceting are similar, leading to an atomic-scale roughening due to inward (outward) displacement of fivefold-coordinated Ti_5c (sixfold-coordinated T_6c) atoms together with outward displacement of threefold-coordinated O_3c atoms. Molecular adsorption occurs by formation of a Ti_5c?OP dative bond with one or more CH?O_2c bonds between CH₃ groups and unsaturated, twofold-coordinated (O_2c) sites. The energies for molecular adsorption, obtained using the B3LYP functional, are virtually identical (about ?21.0 kcal/mol) for the two surfaces and are also close to those found elsewhere for the rutile (1 1 0) and anatase (1 0 1) surfaces. A possible first step in the dissociative adsorption of DMMP has also been modeled and is found to be thermodynamically favored over molecular adsorption to a degree which depends on faceting.     

Reaction of tert-butyl isocyanate and tert-butyl isothiocyanate at the Ge(100) − 2 × 1 Surface

The adsorption of tert-butyl isothiocyanate and tert-butyl isocyanate at the Ge(100) ? 2 × 1 surface was probed using multiple internal reflection Fourier transform infrared (FTIR) spectroscopy X-ray photoelectron spectroscopy (XPS), and density functional theory (DFT) modeling. Results indicate that there are multiple surface products for each molecule. FTIR studies of tert-butyl isothiocyanate reveal adsorption through an S-dative bonded state, while XPS studies further suggest a reactive desorption product which leaves excess sulfur atoms at the surface. Studies of tert-butyl isocyanate indicate that the molecule dissociatively adsorbs at the surface, resulting in tert-butyl and germyl isocyanate groups, as the major pathway, in addition to forming several minor products, including a [2 + 2] cycloaddition product across the C=N bond. DFT was used to simulate vibrational spectra and map the reaction pathways, and confirms that the assigned products are energetically favorable.