Impact of reforming catalyst on the anodic polarisation resistance in single-chamber SOFC fed by methane

This paper emphasises the electrochemical and catalytic properties of a Ni–10% GDC (10% gadolinium-doped ceria) cermet anode of a single-chamber solid oxide fuel cell (SC-SOFC). Innovative coupling of electrochemical impedance spectroscopy with gas chromatography measurements was carried out to characterise the anode material using an operando approach. The experiments were conducted in a symmetric anode/electrolyte/anode cell prepared by slurry coating resulting in 100 μm-thick anode layers. The electrochemical performance was assessed using a two-electrode arrangement between 400 °C and 650 °C, in a methane-rich atmosphere containing CH₄, O₂ and H₂O in a 14:2:6 volumetric ratio. The insertion of a Pt–CeO₂ based catalyst with high specific surface area inside the cermet layer was found to promote hydrogen production from the Water Gas Shift reaction and consequently to improve the electrochemical performances. Indeed, a promising polarisation resistance value of 12 Ω cm² was achieved at 600 °C with a catalytic loading of only 15 wt.%.     

Precise Tuning of the Charge Transfer Kinetics and Catalytic Properties of MoS2 Materials via Electrochemical Methods

MoS₂ has become particularly popular for its catalytic properties towards the hydrogen evolution reaction (HER). It has been shown that the metallic 1T phase of MoS₂, obtained by chemical exfoliation after lithium intercalation, possesses enhanced catalytic activity over the semiconducting 2H phase due to the improved conductivity properties which facilitate charge‐transfer kinetics. Here we demonstrate a simple electrochemical method to precisely tune the electron‐transfer kinetics as well as the catalytic properties of both exfoliated and bulk MoS₂‐based films. A controlled reductive or oxidative electrochemical treatment can alter the surface properties of the film with consequently improved or hampered electrochemical and catalytic properties compared to the untreated film. Density functional theory calculations were used to explain the electrochemical activation of MoS₂. The electrochemical tuning of electrocatalytic properties of MoS₂ opens the doors to scalable and facile tailoring of MoS₂‐based electrochemical devices.     

Enhancement of hydrogen evolution activities of low-cost transition metal electrocatalysts in near-neutral strongly buffered aerobic media

The advantages of hydrogen evolution reaction (HER) in strongly buffered neutral pH are manifold including enhanced stability of the electrocatalysts, oxygen tolerance, safer and environmental friendly devices, etc., yet, not much research effort has been devoted on the subject. HER activities of several low-cost electrocatalysts like Mo₂C, MoS₂, CoSe₂ and NiSe₂ have been studied in sodium phosphate buffer solution of pH 5. An optimal buffer concentration of 1.75 M was observed for the electrocatalysts. Compared to un-buffered electrolyte, a reduction of about 100 mV in the onset overpotential has been achieved. The electrocatalysts are highly oxygen tolerant with more than 90% HER selectivities. Furthermore, electrochemical surface area of Mo₂C was evaluated by capacitance and surface oxidation methods to obtain an insight on the specific adsorption of buffer electrolytes.     

Hydrogen bubble dynamic template synthesis of porous gold for nonenzymatic electrochemical detection of glucose

Gold (Au) films with open interconnected macroporous walls and nanoparticles have been successfully sculptured using the hydrogen bubble dynamic template synthesis followed by a galvanic replacement reaction. Copper (Cu) films with open interconnected macroporous walls and nanoparticles were synthesized using the electrochemically generated hydrogen bubbles as a dynamic template. Then through a galvanic replacement reaction between the porous Cu sacrificial templates and KAu(CN)₂ in solution, the porous Cu films were converted to porous Au films with the similar morphologies. Additional electrochemical dealloying process was introduced to remove the remaining Cu from the porous Au films. X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), Energy-dispersive X-ray (EDX), X-ray diffraction (XRD) and electrochemical methods were adopted to characterize the porous Au films. The resulted porous Au films show excellent catalytic activity toward the electrooxidation of glucose. A nonenzymatic glucose sensor based on those Au film electrodes shows a linear range from 2 to 10 mM with a sensitivity of 11.8 μA cm⁻² mM⁻¹, and a detection limit of 5 μM.     

Synthesis and properties of the compound: LiNi3/5Cu2/5VO4

The LiNi_3/5Cu_2/5VO₄ is synthesized by solution-based chemical method and its formation has been checked by X-ray diffraction (XRD) study. XRD study shows a tetragonal unit cell structure with lattice parameters of a = 11.6475 (18) Å, c = 2.4855 (18) Å and c/a = 0.2134 Å. Electrical properties are verified using complex impedance spectroscopy (CIS) technique. Complex impedance analysis reveals following points: (i) the bulk contribution to electrical properties up to 200 °C, (ii) the bulk and grain boundary contribution at T ≥ 225 °C, (iii) the presence of temperature dependent electrical relaxation phenomena in the material. D.c. conductivity study indicates that electrical conduction in the material is a thermally activated process.     

In situ synthesis of a Prussian blue nanoparticles/graphdiyne oxide nanocomposite with high stability and electrocatalytic activity

Herein we report an in situ synthesis of Prussian blue nanoparticles (PB) on graphdiyne oxide (GDYO) which acts as an excellent substrate. The hybrid was then used as an electrode with high electrochemical catalytic activity towards hydrogen peroxide. The PB/GDYO hybrid was prepared by simply adding FeCl₃ to GDYO solution, and then mixing with Fe(CN)₆^3 − at room temperature. The GDYO was able to anchor PB in nanoparticle form and stabilize it in neutral and weakly basic solutions. The hybrid was investigated by transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy and electrochemical measurements. The PB/GDYO hybrid showed high electrochemical catalytic activity and stability for the detection of hydrogen peroxide.     

Vertical crosslinking MoS2/three-dimensional graphene composite towards high performance supercapacitor

The vertical crosslinking MoS₂/three-dimensional graphene composite has been prepared by hydrothermal method, which delivered a superior and stable electrochemical capacitive performance.     

Using flowerlike polymer–copper nanostructure composite and novel organic–inorganic hybrid material to construct an amperometric biosensor for hydrogen peroxide

A new type of amperometric hydrogen peroxide biosensor was fabricated by entrapping horseradish peroxidase (HRP) in the organic–inorganic hybrid material composed of zirconia–chitosan sol–gel and Au nanoparticles (ZrO₂–CS–AuNPs). The sensitivity of the biosensor was enhanced by a flowerlike polymer–copper nanostructure composite (pPA–FCu) which was prepared from co-electrodeposition of CuSO₄ solution and 2,6-pyridinediamine solution. Several techniques, including UV–vis absorption spectroscopy, scanning electron microscopy, cyclic voltammetry, chronoamperometry and electrochemical impedance spectroscopy were employed to characterize the assembly process and performance of the biosensor. The results showed that this pPA–FCu nanostructure not only had excellent redox electrochemical activity, but also had good catalytic efficiency for hydrogen peroxide. Also the ZrO₂–CS–AuNPs had good film forming ability, high stability and good retention of bioactivity of the immobilized enzyme. The resulting biosensors showed a linear range from 7.80 × 10^?7 to 3.7 × 10^?3 mol L^?1, with a detection limit of 3.2 × 10^?7 mol L^?1 (S/N = 3) under optimized experimental conditions. The apparent Michaelis–Menten constant was determined to be 0.32 mM, showing good affinity. In addition, the biosensor which exhibits good analytical performance, acceptable stability and good selectivity, has potential for practical applications.     

Structural and electrochemical properties of a porous nanostructured SnO2 film electrode for lithium-ion batteries

A B₂O₃-doped SnO₂ thin film was prepared by a novel experimental procedure combining the electrodeposition and the hydrothermal treatment, and its structure and electrochemical properties were investigated by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD) analysis, energy dispersive X-ray (EDX) spectroscopy and galvanostatic charge–discharge tests. It was found that the as-prepared modified SnO₂ film shows a porous network structure with large specific surface area and high crystallinity. The results of electrochemical tests showed that the modified SnO₂ electrode presents the largest reversible capacity of 676 mAh g^?1 at the fourth cycle, close to the theoretical capacity of SnO₂ (790 mAh g^?1); and it still delivers a reversible Li storage capacity of 524 mAh g^?1 after 50 cycles. The reasons that the modified SnO₂ film electrode shows excellent electrochemical properties were also discussed.     

A new solid electrolyte to fill the gap between low temperatures and high temperatures SOFC materials?

According to TG/DTA analysis, the new pyrochlore-type compound K_0.88H_1.12Nb₂O₆·1.58H₂O (Fd-3 m, a = 10.645(4) Å at 300 K) loses crystallization water on heating up to 773 K, but retains –OH hydrogen. Impedance spectroscopy in non-humidified air suggests the material is promising for SOFC applications at intermediate temperatures because the bulk conductivity values reach 10⁻² S/cm at 623 K.     

Ultrasonic-electrodeposition of gold–platinum alloy nanoparticles on multi-walled carbon nanotubes – ionic liquid composite film and their electrocatalysis towards the oxidation of nitrite

We report here for the first time on the electrochemical co-deposition of gold–platinum (AuPt) nanoparticles on multi-walled carbon nanotubes (MWNT) – ionic liquid (i.e. trihexyltetradecylphosphonium bis(trifluoromethylsulfonyl)imide, [P_6,6,6,14][NTf₂]) composite surface in ultrasonic field. The obtained AuPt nanoparticles were characterized by scanning electron microscope, X-ray diffraction and X-ray photoelectron spectroscopy. It was found that they were well-dispersed on the composite surface, with particle size about 10 nm. Furthermore, they exhibited alloy features. Electrochemical impedance spectroscopy and voltammetric experiments showed that the resulted AuPt-MWNT-[P_6,6,6,14][NTf₂] modified electrode possessed rather small electron transfer resistance and good catalytic activity towards nitrite oxidation. Under the optimized conditions, the oxidation current of nitrite was linear to its concentration in the range of 5–200 nM and the detection limit was down to 1.0 nM (S/N = 3).     

Electrochemical fabrication of novel fluorescent polymeric film: Poly(pyrrole–pyrene)

We describe herein the electrochemical characterization and polymerization of 4-pyren-1-yl-butyric acid 11-pyrrol-1-yl-decyl ester (pyrrole–pyrene) in CH₃CN. The electrochemical oxidation of the pyrrole group at 0.77 V vs Ag/Ag + 10 mM in CH₃CN led to the first example of a fluorescent polypyrrole film. The mechanism of deposition on platinum electrode was studied by voltammetry and chronoamperometry. The optical properties of the polymeric films electrogenerated on ITO electrodes were examined by UV–visible spectroscopy and fluorescence microscopy indicating an increase in fluorescence properties by increased polymer thickness. The electrochemical oxidation of pyrenyl group linked to the polypyrrole backbone was carried out at 1.2 V. This additional polymerization was demonstrated by UV–visible spectroscopy and induced the loss of the fluorescence properties of the resulting polymeric film.     

Molybdenum electrodes for hydrogen production by water electrolysis using ionic liquid electrolytes

The hydrogen production by water electrolysis was tested with different electrocatalysts (molybdenum, nickel, iron alloys containing chromium, manganese and nickel) using aqueous solutions of ionic liquid (IL) like 1-butyl-3-methylimidazolium tetrafluoroborate (BMI.BF₄). The hydrogen evolution reaction (HER) was performed at room temperature in a potential of −1.7 V (PtQRE). A Hoffman cell apparatus was used to water electrolysis with current density values, j, between 14.6 mA cm⁻² (for Ni electrode) and 77.5 mA cm⁻² (for Mo electrode). The system efficiency was very high for all electrocatalysts tested, between 97.0% and 99.2%. The energy activation values of HER was determined in an aqueous solution of BMI.BF₄ 10 vol.%, using platinum (23.40 kJ mol⁻¹) and Mo (9.22 kJ mol⁻¹) as electrocatalysts. The results show that the hydrogen production in IL electrolyte can be carried out with cheap material at room temperature, which makes this method economically attractive.     

Preparation of monodisperse carbon nanospheres for electrochemical capacitors

The efficiently hydrothermal route using sucrose without any catalysts is employed to prepare the uniform carbon spheres. The monodisperse 100–150 nm carbon spheres are obtained with the activation treatment in molten KOH. The carbon spheres are characterized by transmission electron microscope, X-ray diffraction, N₂ adsorption, Raman spectroscopy and electrochemical techniques. The relationships of specific capacitance and surface properties of carbon spheres are investigated. A single electrode of carbon nanosphere materials performs excellent specific capacitance (328 F g⁻¹), area capacitance (19.2 μF cm⁻²) and volumetric capacitance (383 F cm⁻³).     

Electrochemical deposition and characterization of NiCu coatings as cathode materials for hydrogen evolution reaction

In this study, NiCu composite coatings were electrochemically deposited on a copper electrode (Cu/NiCu) and characterized by atomic absorption spectroscopy (AAS), scanning electron microscopy (SEM) and scanning electrochemical microscopy (SECM) techniques in view of their possible applications as electrocatalytic materials for the hydrogen evolution reaction (HER). The HER activity of the prepared electrodes were studied in 1 M KOH solution by cathodic current–potential curves and electrochemical impedance spectroscopy (EIS) techniques. It was found that, the NiCu coating has a porous structure and good electrocatalytic activity for the HER in alkaline medium. The HER activity of the Cu/NiCu electrode was higher than uncoated (Cu) and Ni coated (Cu/Ni) copper electrodes. Its catalytic activity was related to the porosity as well as synergistic interaction of Ni and Cu.     

Promotion of PtIr and Pt catalytic activity towards ammonia electrooxidation through the modification of Zn

Zn is introduced into Pt and PtIr electrodes by applying potential cycles to their corresponding polycrystalline microdisc electrodes in a ZnCl₂-containing ionic liquid bath. Scanning-electron microscopy and energy-dispersive X-ray microanalysis studies show that nanostructured PtIrZn and PtZn layers created on the microdisc electrodes contain approximately 5 wt% Zn. Cyclic voltammetric studies reveal that PtZn and PtIrZn are significantly more active towards electrochemical ammonia oxidation in alkaline media than virgin Pt and PtIr electrodes. The PtIrZn electrode demonstrates a low onset potential of 0.30 V vs RHE and a high exchange current density of 4.3 × 10^− 8 A cm^− 2, which is favorably comparable to state-of-the-art electrocatalyts for the same reaction. The catalytic activity promotion by the Zn modification may be related to the inhibition of the hydrogen electrochemistry. PtIrZn appears therefore to be a very promising anode catalyst for direct ammonia fuel cells and ammonia electrolysis.     

Electrolysis of solid MoS2 in molten CaCl2 for Mo extraction without CO2 emission

Sintered (300 °C) porous pellets of MoS₂ were electrolysed to elemental S and Mo in molten CaCl₂ (800–900 °C) under argon at 1.0–3.0 V for 1–20 h. On a graphite anode, the product was primarily S (but traces of CS₂ could not yet be excluded by this work) and evaporated from the molten salt, allowing the electrolysis to continue. It then condensed to solid at the lower temperature regions of the system. The anode remained intact after repeated uses. The MoS₂ pellet was highly conducting at high temperatures and could be fast electro-reduced to fine Mo powders (0.1–1.0 μm) in which the S content could be below 1000 ppm. No reduction occurred at voltages below 0.5 V. Partial reduction was seen at 0.5–0.7 V, and converted MoS₂ to a mixture of MoS₂ and Mo₃S₄, or Mo₃S₄ and Mo with the Mo content increasing with the voltage. Cyclic voltammetry of the MoS₂ powder in a Mo-cavity electrode, together with the electrolysis results, revealed the reduction mechanism to include two steps: MoS₂ to Mo₃S₄ at −0.28 V (potential vs. Ag/AgCl), and then to Mo at −0.43 V.     

A disordered rock-salt Li-excess cathode material with high capacity and substantial oxygen redox activity: Li1.25Nb0.25Mn0.5O2

A disordered rocksalt Li-excess cathode material, Li_1.25Nb_0.25Mn_0.5O₂, was synthesized and investigated. It shows a large initial discharge capacity of 287 mAh g^− 1 in the first cycle, which is much higher than the theoretical capacity of 146 mAh g^− 1 based on the Mn³⁺/Mn⁴⁺ redox reaction. In situ X-ray diffraction (XRD) demonstrates that the compound remains cation-disordered during the first cycle. Electron energy loss spectroscopy (EELS) suggests that Mn and O are likely to both be redox active, resulting in the large reversible capacity. Our results show that Li_1.25Nb_0.25Mn_0.5O₂ is a promising cathode material for high capacity Li-ion batteries and that reversible oxygen redox in the bulk may be a viable way forward to increase the energy density of lithium-ion batteries.     

Sn-0.4BPO4 composite as a promising negative electrode for rechargeable lithium batteries

The structural and textural properties of a Sn-0.4BPO₄ composite material synthesized by ex situ dispersion of β-Sn in a BPO₄ matrix were investigated by using several complementary techniques to study the global order (XRD, TGA-DSC, SEM-XEDS) and the local order (FT-IR, ¹¹⁹Sn Mössbauer spectroscopy and X-ray absorption spectroscopy). The results reveal that the composite material consists of three main components: an electrochemically active species “Sn”, an inactive matrix “BPO₄”, and an amorphous Sn(II) borophosphate which acts as a link between the two former and which improves the cohesion of the composite. The electrochemical performances of the composite material were tested in Swagelok-type cells with metallic Li as counter-electrode. It shows a high reversible capacity of about 500 mAh g^?1 at a C/20 rate, and a very good stability under cycling even at very fast rates of C or C/1.3.     

Platinum-like oxidation of nickel surfaces by rapidly switching voltage to generate highly active bifunctional catalysts

Recently the importance of catalyzing the water splitting step of the hydrogen evolution reaction (HER) was highlighted. We demonstrate here a treatment to modify a nickel surface into a highly effective bifunctional HER catalyst (i₀ = 0.18 A/m², Tafel Slope = 106 mV/dec) that has a good distribution of both water splitting sites and H_ads combination sites. The resulting surface is characterized electrochemically, and with SEM, EDX, XPS and AFM. The data is found to be consistent with the treatment oxidizing the Ni surface in a novel way creating the hypothesized “Ni(OH)_x” structure (x between 0 and 2).