Regeneration of polycondensation of wholly aromatic poly(azomethine)s with 1,5‐ or 2,6‐substituted naphthalene moiety in main chain

Wholly aromatic poly(azomethine)s with 1,5‐ or 2,6‐substituted naphthalene moiety in the main chains were prepared in aprotic polar solvents or m‐cresol under various reaction conditions. In the polymerization of 1,5‐diaminonaphthalene with terephthalaldehyde, the polymer that synthesized in (HMPA/DMSO) at room temperature for 24 h by adding 5 wt % of calcium chloride and a very small amount of p‐toluenesulfonic acid showed the highest reduced viscosity in all of the polymers from 1,5‐diaminonaphthalene. The reduced viscosity of poly(azomethine)s synthesized from 2,6‐diaminonaphthalene with 2,6‐diformylnaphthalene in m‐cresol and with terephthalaldehyde in HMPA/DMSO were η_red = 0.35 and 0.36, respectively. The thermal analysis showed the poly(azomethine)s had high thermal stability and the glass‐transition temperatures of these polymers are about 250 °C. The X‐ray diffraction showed that they are partially crystalline. They could be polymerized again by second stage polycondensation in polyphosphoric acid. The reduced viscosities of the obtained polymers were about 2–5 times as high as that of the pristine polymers. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1064–1072, 2000     

Novel Hyperbranched Poly([1,2,3]‐triazole)s Derived from AB2 Monomers by a 1,3‐Dipolar Cycloaddition

Summary: Novel hyperbranched poly([1,2,3]‐triazole)s were synthesized from several AB₂ monomers by a 1,3‐dipolar cycloaddition reaction. The compound 3,5‐bis(propargyloxy)benzyl azide was polymerized thermally at room temperature leading to 1,4‐ and 1,5‐disubstituted poly([1,2,3]‐triazole) and catalytically leading only to the 1,4‐disubstituted poly([1,2,3]‐triazole). Only the thermal reaction led to fully soluble products. The AB₂ monomers containing an internal alkyne A unit could be autopolymerized thermally under mild reaction conditions leading to soluble, high‐molecular‐weight hyperbranched poly([1,2,3] triazole)s. All products were characterized by detailed NMR investigations.

Synthesis route for polymers 8a and 8b .     

Synthesis and properties of novel aromatic poly(ester-imide)s bearing 1,5-bis(benzoyloxy)naphthalene units

Two series of new aromatic poly(ester-imide)s were prepared from 1,5-bis(4-aminobenzoyloxy)naphthalene (p-1) and 1,5-bis(3-aminobenzoyloxy)naphthalene (m-1), respectively, with six commercially available aromatic tetracarboxylic dianhydrides via a conventional two-stage synthesis that included ring-opening polyaddition to give poly(amic acid)s followed by chemical imidization to polyimides. The intermediate poly(amic acid)s obtained in the first stage had inherent viscosities of 0.41-0.84 and 0.66-1.37 dl/g, respectively. All the para-series and most of the meta-series poly(ester-imide)s were semicrystalline and showed less solubility. Two of the meta-series poly(ester-imide)s derived from less rigid dianhydrides were amorphous and readily soluble in polar aprotic solvents, and they could be solution-cast into transparent and tough films with good mechanical properties. The meta-series polymers derived from rigid dianhydrides were generally semicrystalline and showed less solubility. Except for one example, the meta-series poly(ester-imide)s displayed discernible T_gs in the range 239-273 °C by DSC. All of these two series poly(ester-imide)s did not show significant decomposition below 450 °C in nitrogen or in air.     

Synthesis and characterization of heat resistant, pyridine-based polyimides with preformed ether and ester groups

A pyridine-based diamine as a building block for the preparation of heat resistant polyimides was prepared. Reaction of 1,5-dihydroxy naphthalene with 4-nitrobenzoyl chloride resulted in preparation of 5-hydroxy-1-naphthyl-4-nitrobenzoate (HNNB). 5-Hydroxyl-1-naphthyl-4-aminobenzoate (HNAB) was prepared via reduction of nitro group of HNNB. The diamine with built-in ether and ester groups was synthesized by nucleophilic substitution reaction of HNAB with 2,6-dichloropyridine in the presence of K₂CO₃. The obtained diamine was fully characterized and its polycondensation reaction with different aromatic dianhydrides led to preparation of novel heat resistant poly (ether ester imide)s. All the polymers were characterized and their physical and thermal properties were studied.     

Calcium‐containing poly(urethane‐urea)s: Synthesis,spectral, and thermal studies

A calcium salt of mono(hydroxypentyl)phthalate [Ca(HPP)₂] was synthesized by the reaction of 1,5‐pentanediol, phthalic anhydride, and calcium acetate. Four different bisureas such as hexamethylene bis(ω,N‐hydroxyethylurea), tolylene 2,4‐bis(ω,N‐hydroxyethylurea), hexamethylene bis(ω,N‐hydroxypropylurea), and tolylene 2,4‐bis(ω,N‐hydroxypropylurea) were prepared by reacting ethanolamine or propanolamine with hexamethylene diisocyanate (HMDI) or tolylene 2,4‐diisocyanate (TDI). Calcium‐containing poly(urethane‐urea)s (PUUs) were synthesized by reacting HMDI or TDI with 1:1 mixtures of Ca(HPP)₂ and each of the bisureas with di‐n‐butyltin dilaurate as a catalyst. The PUUs were well characterized by Fourier transform infrared spectroscopy, ¹H and ¹³C NMR, solid‐state ¹³C–cross‐polarization/magic‐angle spinning NMR, viscosity, solubility, elemental analysis, and X‐ray diffraction studies. Thermal properties of the polymers were also examined with thermogravimetric analyses and differential scanning calorimetry. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1809–1819, 2004     

Preparation and characterization of poly(m-xylylene oxamide) and its copolymer

New polyoxamides, poly(m-xylylene oxamide) (PMXD2) and its copolymer with 2-methyl-1,5- pentanediamine (P(MXD2/M52)) with relative viscosity up to 4.6 were synthesized via spray/solid state polymerization. The obtained polyoxamides were characterized by FTIR, NMR, WAXD, DSC and TGA. The T_m of the copolymers decreased with increasing percentage of poly(2-methyl-1,5- pentaneoxamide) (PM52) in the copolymer from 346°C for 100% poly(meta-xylyleneoxamide) (PMXD2) to 277°C for copolymers of PMXD/PM52 (60/40). TGA analysis revealed that the thermal stability of the copolymers compared well with commercial PA6 and XRD studies suggested the copolymers possessed high crystallinity. DMA profile of the PMXD/PM52 (70/30) copolymer showed better mechanical performance with a storage modulus of about 7.2 GPa as compared to 1.8 GPa of PA6 at 25°C.     

Hydroxycarbonylation of 1-hexene catalyzed by [Rh(COD)(amine)2](PF6) complexes immobilized on poly(4-vinylpyridine)

Summary Rhodium(I) complexes, [Rh(COD)(amine)₂](PF₆) (COD = 1,5-cyclooctadiene, amine = 4-picoline, 3-picoline, 2-picoline, pyridine, 3,5-lutidine or 2,6-lutidine) immobilized on poly(4-vinylpyridine) in contact with water catalyzed both the hydroxycarbonylation of 1-hexene to propionic acid and the water-gas shift reaction (WGSR). The role of the coordinated amine on the catalytic activity was examined.     

Synthesis and characterization of phthalazinone containing poly(arylene ether)s via a novel N–C coupling reaction

High‐molecular‐weight poly(phthalazinone)s with very high glass‐transition temperatures (T_g's) were synthesized via a novel N–C coupling reaction. New bisphthalazinone monomers ( 7a–e ) were synthesized from 2‐(4‐chlorobenzoyl) phthalic acid in two steps. Poly(phthalazinone)s, having inherent viscosities in the range of 0.34–0.91 dL/g, were prepared by the reaction of the bis(phthalazinone) monomers with an activated aryl halide in a dipolar aprotic solvent in the presence of potassium carbonate. The poly(phthalazinone)s exhibited T_g's greater than 230 °C. polymer 8b synthesized from diphenyl biphenol and bis(4‐flurophenyl) sulfone demonstrated the highest T_g of 297 °C. Thermal stabilities of the poly(phthalazinone)s were determined by thermogravimetric analysis. All the poly(phthalazinone)s showed a similar pattern of decomposition with no weight loss below 450 °C in nitrogen. The temperatures of 5% weight loss were observed to be about 500 °C. The poly(phthalazinone)s containing 4,4′‐isopropylidenediphenol and 4,4′‐(hexafluoroisopropylidene) diphenol and diphenyl ether linkage were soluble in chlorinated solvents such as chloroform. Other poly‐(phthalazinone)s were soluble in dipolar aprotic solvents such as N,N′‐dimethylacetamide. The soluble poly(phthalazinone)s can be cast as flexible films from solution. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2481–2490, 2003     

Heat capacities of solid copoly(amino acid)s

Recently heat capacities C_p of poly(amino acid)s of all naturally occurring amino acids have been determined. In a second step the heat capacities of four copoly(amino acid) s are studied in this research. Poly(L -lysine · HBr-alanine), poly(L -Lysine · HBr-phenylalanine), poly(sodium-L -glutamate-tyrosine), and poly(L -proline-glycine-proline) heat capacities are measured by differential scanning calorimetry in the temperature range 230–390 K. This is followed by an analysis using approximate group vibrations and fitting the C_p contributions of the skeletal vibrations of the corresponding homopolymers to a two-parameter Tarasov function. Good agreement is found between experiment and calculation. Predictions of heat capacities based on homopoly(amino acid)s are thus expected to be possible for all polypeptides, and enthalpies, entropies, and Gibbs functions for the solid state can be derived.     

Synthesis and properties of novel aromatic poly(ester amide)s derived from 1,5-bis(4-aminobenzoyloxy)naphthalene and aromatic dicarboxylic acids

A new naphthalene ring-containing bis(ester amine), 1,5-bis(4-aminobenzoyloxy)naphthalene (2), was synthesized from the condensation of 1,5-dihydroxynaphthalene with 4-nitrobenzoyl chloride followed by catalytic hydrogenation. A series of naphthalene-containing poly(ester amide)s having inherent viscosities of 0.34-0.82 dl/g were prepared by the direct phosphorylation polyamidation from bis(ester amine) 2 with various aromatic dicarboxylic acids. The poly(ester amide)s derived from terephthalic acid, 4,4′-biphenyldicarboxylic acid, 2,6-naphthalenedicarboxylic acid, and 4,4′-oxydibenzoic acid were semicrystalline and showed less solubility. The other polymers were amorphous and readily soluble in polar organic solvents and gave flexible and tough films via solution casting. Except for four examples, the poly(ester amide)s displayed discernible glass transitions between 190 and 227 °C by differential scanning calorimetry. These poly(ester amide)s did not show significant decomposition below 400 °C in nitrogen or air.     

Polymerization of aniline derivatives by K2Cr2O7 and production of Cr2O3 nanoparticles

Oxidative polymerization of aniline, anthranilic acid, and aniline‐co‐anthranilic acid by potassium dichromate Cr(VI) as an oxidant in acidic medium was investigated. In this study, the polymerization process of aniline, o‐anthranilic acid as well as aniline/o‐anthranlic acid using K₂Cr₂O₇ produced, coordinated Cr(III)/polyaniline (PANI), Cr(III)/polyanthranilic acid (PAA) and Cr(III)/poly aniline‐co‐anthranilic acid (PANAA). The mechanism of polymerization reaction in the presence of dichromate was hypothesized. The precursor chromium doped polymers were characterized by TGA, FT‐IR, UV‐visible, XRD analyses. Cr₂O₃ nanoparticles size were determined using TEM analysis. The calcinations process of synthesized chromium doped PANI, PAA and PANAA yields Cr₂O₃ nanoparticles 26%, 31%, and 34% wt. respectively. Rhombohedral phase of Cr₂O₃ particles in the range from 33 to 61 nm was produced from chromium/polyanthranilic acid (PAA) and chromium/poly(aniline‐co‐anthranilic acid) PANAA. UV‐ visible analysis showed that optical band gaps (E_g) of doped poly aniline and its derivatives are in the range from1.55 to 1.80 using Tacu's law. The band gap values reveal that the doped chromium emeraldine base can be used as semiconductor materials. Copyright © 2016 John Wiley & Sons, Ltd.     

电化学还原合成1,5-二氨基萘

研究了以1,5-二硝基萘为原料电化学还原合成1,5-二氨基萘的反应. 室温下, 运用循环伏安法研究了1,5-二硝基萘的循环伏安行为, 1,5-二硝基萘的还原是一受扩散控制的不可逆反应; 循环伏安图上两个连续的还原峰对应于两个硝基的还原; 求出了反应的传递系数α₁在0.275～0.335之间, α₂在0.360～0.437之间. 探讨了电解电位(E)、底物浓度(c₁)、电解电量(Q)、硫酸浓度(c₂)以及溶剂(DMF)与水的体积比(Y)对产物产率的影响, 在最优条件下1,5-二氨基萘的产率最高可达77%.     

Poly(arylene ether)s,poly(arylene thioether)s,and poly(arylene sulfone)s derived from a dihydroxy(imidoarylene) monomer

Novel poly(arylene ether)s, poly(arylene thioether)s, and poly(arylene sulfone)s were synthesized from the dihydroxy(imidoarylene) monomer 1 . The syntheses of poly(arylene ether)s were carried out in DMAc in the presence of anhydrous K₂CO₃ by a nucleophilic substitution reaction between the bisphenol and activated difluoro compounds. Poly(arylene thioether)s were synthesized according to the recently discovered one-pot polymerization reaction between a bis(N,N′-dimethyl-S-carbamate) and activated difluoro compounds in the presence of a mixture of Cs₂CO₃ and CaCO₃. The bis(N,N′-dimethyl-S-carbamate) 3 was synthesized by the thermal rearrangement reaction of bis(N,N′-dimethylthiocarbamate) 2 , which was synthesized from 1 by a phase-transfer catalyzed reaction. The poly(arylene thioether)s were further oxidized to form poly(arylene sulfone)s, which would be very difficult, if not impossible, to synthesize by other methods. All of the polymers described have extremely high T_gs and thermal stability as determined from DSC and TGA analysis. Poly(arylene sulfone)s have the highest T_gs and they are in the range of 298–361°C. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1201–1208, 1998     

Heat-resistant pyridine-based poly(ether-ester)s: Synthesis, characterization and properties

A pyridine-based diacid was synthesized via nucleophilic substitution reaction of 4-hydroxy benzoic acid with 2,6-dichloropyridine in the presence of potassium carbonate. The diacid was characterized using FT-IR and 1H-NMR spectroscopic methods and also with elemental analysis. Polycondensation reaction of the diacid with different diols including 1,4-dihydroxy benzene, 1,5-dihydroxy naphthalene, bis-phenol A and bis-phenol-P resulted in preparation of pyridine-based poly(ether-ester)s. The polymers were characterized and their physical and thermal properties including inherent viscosity, molecular weight, solubility, thermal stability, thermal behavior and crystallinity were studied. They revealed high heat-resistance and improved solubility in polar solvents. Structure-property relations for the prepared polyester were also studied.     

Synthesis and thermal behaviour of silicon containing poly(ester imide)s

A series of silicon containing poly(ester imide)s [PEIs] were synthesized using novel vinyl silane diester anhydride (VSEA) and various aromatic and aliphatic dimines by two-step process includes ring-opening polyaddition reaction to form poly(amic acid) and thermal cyclo-dehydration process to obtain poly(ester imide)s. VSEA was synthesized by using dichloro methylvinylsilane and trimellitic anhydride in the presence of K₂CO₃ by nucleophilic substitution reaction. The PEIs were characterized by FTIR spectroscopy. The thermal properties of PEIs were investigated by using differential scanning calorimetry (DSC) and thermogravimetric analysis (TG) methods. The prepared PEIs showed glass transition temperatures in the range of 320–350°C and their 5% mass loss was recorded in the temperature range of 500–520°C in nitrogen atmosphere. These had char yield in the range of 45–55% at 800°C.     

Microwave‐assisted synthesis of optically active poly(amide imide)s derived from diacid chloride containing epiclon and L‐leucine with aromatic diamines

Epiclon [3a,4,5,7a‐tetrahydro‐7‐methyl‐5‐(tetrahydro‐2,5‐dioxo‐3‐furanyl)‐1,3‐isobenzofurandione or 5‐(2,5‐dioxotetrahydrofurfuryl)‐3‐methyl‐3‐cyclohexyl‐1,2‐dicarboxylic acid anhydride] was reacted with L ‐leucine in acetic acid, and the resulting imide acid ( 3 ) was obtained in a high yield. The diacid chloride ( 4 ) was obtained from its diacid derivative 3 by a reaction with oxalyl chloride in dry carbon tetrachloride. The polycondensation reaction of 4 with several aromatic diamines, such as 4,4′‐sulfonyldianiline, 4,4′‐diaminodiphenylmethane, 4,4′‐diaminodiphenylether, p‐phenylenediamine, m‐phenylenediamine, 2,4‐diaminotoluene, and 1,5‐diaminonaphthalene, was developed with a domestic microwave oven in the presence of a small amount of a polar organic medium such as N‐methylpyrrolidone. The polymerization reactions were also performed with two other methods: low‐temperature solution polycondensation in the presence of trimethylsilyl chloride and reflux conditions. A series of optically active poly(amide imide)s with moderate yields and inherent viscosities of 0.12–0.19 dL/g were obtained. All of these polymers were fully characterized by IR, elemental analysis, and specific rotation techniques. Some structural characterizations and physical properties of these optically active poly(amide imide)s are reported. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1077–1090, 2003     

Electrical conductivity of π-conjugated polymers with nitro substituents

π-Conjugated polymers bearing nitro substituent(s), e.g., poly(aryleneethynylene) (PAE) type polymers and poly(4,8-dinitroanthraquinone-1,5-diyl) P(4,8-NO₂-1,5-AQ), show semiconducting properties with electrical conductivities of an order of 10⁻⁷ to 10⁻⁶ S · cm⁻¹ at room temperature without special oxidation and reduction of the polymer. P(4,8-NO₂-1,5-AQ) shows a large shift of phase in alternating current (ac) measurements and a unique magnetism at low temperature.     

New organosoluble and thermally stable poly(amide‐imide)s with benzoxazole or benzothiazole pendent groups: synthesis and characterization

Two new benzoxazole or benzothiazole‐containing diimide‐dicarboxylic acid monomers, such as 2‐[3,5‐bis(N‐trimellitimidoyl)phenyl]benzoxazole ( 2 _o ) or 2‐[3,5‐bis(N‐trimellitimidoyl)phenyl]benzothiazole ( 2 _s ) were synthesized from the condensation reaction between 3,5‐diaminobenzoic acid and 2‐aminophenol or 2‐aminothiophenol in polyphosphoric acid (PPA) with subsequent reaction of trimellitic anhydride in the presence of glacial acetic acid, respectively, and two new series of modified aromatic poly(amide‐imide)s were prepared. This preparation was done with pendent benzoxazole or benzothiazole units from the newly synthesized diimide‐dicarboxylic acid and various aromatic diamines by triphenyl phosphite‐activated polycondensation. In addition, the corresponding unsubstituted poly(amide‐imide)s were prepared under identical experimental conditions for comparative purposes. Characterization of polymers was accomplished by inherent viscosity measurements, FT‐IR, UV–visible, ¹H‐NMR spectroscopy and thermogravimetry. The polymers were obtained in quantitative yields with inherent viscosities between 0.39 and 0.81 dl g^?1. The solubilities of modified poly(amide‐imide)s in common organic solvents as well as their thermal stability were enhanced compared to those of the corresponding unmodified poly(amide‐imide)s. The glass transition temperature, 10% weight loss temperature, and char yields at 800°C were, respectively, 7–26°C, 17–46°C and 2–5% higher than those of the unmodified polymers. Copyright © 2010 John Wiley & Sons, Ltd.     

A new and green approach for regiospecific synthesis of novel chromeno-triazolopyrimidin using tungstic acid immobilized MCM-41 as a reusable catalyst

A novel, eco-friendly and fast route has been developed for the synthesis of new and known triazolo[1,5-a]pyrimidin fused chromone derivatives via a one pot three-component reaction of 3-amino-1,2,4-triazoles, aromatic aldehydes and 4-hydroxycoumarin in aqueous medium at room temperature. These reactions are catalyzed by MCM-41-HWO₄ as a safe and recyclable mesoporous solid acid. It combines successfully the synergistic effect of green chemistry with nanocatalysis. The yields are high and the products were characterized by ¹H NMR, ¹³CNMR spectra and elemental analysis.     

Synthesis of novel pyrrole derivatives from the multicomponent reaction using the new N-sulfonic acid modified poly (styrene-diethylenetriamine) as a solid acid catalyst

An efficient acid-catalyzed synthesis of 1,5-diaryl-3-(arylamino)-1H-pyrrol-2(5H)-ones is reported using novel N-sulfonic acid modified poly (styrene-diethylenetriamine) through three-component reaction between aldehyde, amine, and ethyl pyruvate in high yields and short times. This heterogeneous solid catalyst is produced by reacting amine-modified chloromethyl polystyrene with neat chlorosulfonic acid. The structure of the synthesized catalyst was examined with Fourier transform-infrared spectroscopy (FT-IR), X-ray diffraction (XRD), dynamic light scattering (DLS), thermogravimetric analysis (TGA), differential thermal analysis (DTA), scanning electron micrograph (SEM), Brunauer–Emmett–Teller (BET), energy dispersive spectroscopy (EDS), and elemental analyses. The heterogeneous catalyst has many advantages, including an easy work-up procedure, a high product yield, and the capability to be easily regenerated and reused for at least five cycles without losing its activity.