Optical properties of metamaterial-based devices modulated by a liquid crystal

Due to the fact that it is possible to manipulate light with photonic crystals (PCs), PCs hold a great potential for designing new optical devices. There has been an increase in research on tuning the optical properties of PCs to design devices. We presented a numerical study of optical properties of metamaterial-based devices by liquid crystal infiltration. The plane wave expansion method and finite-difference time-domain method for both TE and TM modes revealed optical properties in photonic crystal structures in an air background for a square lattice. E7 type has been used as a nematic liquid crystal and SrTiO₃ as a ferroelectric material. We showed the possibility of the metamaterials for a two-dimensional photonic crystal cavity on a ferroelectric base infiltrated with a nematic liquid crystal.     

Creation of tunable absolute bandgaps in a two-dimensional anisotropic photonic crystal modulated by a nematic liquid crystal

Photonic crystals (PCs) have many potential applications because of their ability to control light-wave propagation. We have investigated the tunable absolute bandgap in a two-dimensional anisotropic photonic crystal structures modulated by a nematic liquid crystal. The PC structure composed of an anisotropic-dielectric cylinder in the liquid crystal medium is studied by solving Maxwell's equations using the plane wave expansion method. The photonic band structures are found to exhibit absolute bandgaps for the square and triangular lattices. Numerical simulations show that the absolute bandgaps can be continuously tuned in the square and triangular lattices consisting of anisotropic-dielectric cylinders by infiltrating nematic liquid crystals. Such a mechanism of bandgap adjustment should open up a new application for designing components in photonic integrated circuits.     

Control of the transmission spectrum of a photonic crystal with lattice defects

The transmission spectrum of a one-dimensional photonic crystal with structural defects is investigated. An anisotropic layer of a nematic liquid crystal is considered as a defect. The possibility of effective external control of the transmission spectrum of the photonic crystal by changing either the orientational state of the defect liquid crystal layer (for example, using an electric field) or the angle of incidence of light is shown. It is established that the spectral properties of the photonic crystal change radically with a change in the optical characteristics of the defect layer in the vicinity of the temperature phase transition of the nematic liquid crystal to the isotropic state.     

Optical bistability in a photonic crystal with a liquid-crystal defect

We investigate experimentally the nonlinear transmission of a photonic crystal with a nematic liquid-crystal defect upon reorientation of the director in a field of cw laser radiation propagating at a certain angle to the sample. At different detunings, we observed the regimes of bistability, differential gain, and optical limiting. The resonance transmission peaks were detuned from the laser radiation wavelength by changing the angle of light incidence onto the sample. The value of nematic nonlinear constant n ₂ determined from the experimental data is in good agreement with the theoretical estimate.     

Localized electromagnetic modes and the transmission spectrum of a one-dimensional photonic crystal with lattice defects

The properties of localized electromagnetic modes in a one-dimensional photonic crystal with a structural defect layer were studied. The role of the defect was played by an anisotropic nematic liquid crystal layer. The frequency and the damping factor of defect modes were shown to substantially depend on the defect layer thickness and the orientation of the optical axis of the nematic. The transmission spectra of photonic crystals with one and two lattice defects were studied. Taking into account the special feature of nematic liquid crystals distinguishing them from usual crystals, namely, large permittivity anisotropy, it was shown that the transmission spectrum of the photonic crystal could be controlled by varying the orientation of the optical axis of the nematic, for instance, under the action of an external electric field.     

Photonic crystals with a specified bandgap width

A new method is proposed for the production of photonic crystals with a thoroughly controlled photonic bandgap. The method is based on the synthesis of an A_1?x B _x photonic crystal with controlled parameter x based on two isostructural A and B photonic crystals such that the photonic bandgap of the A crystal is smaller and that of the B crystal is greater than the required bandgap. The method is exemplified in a (100 ? x) mol % SiO₂?x mol % ZnO inverse opal, in which the relative stop-band width monotonically increases with parameter x.     

光控二维光子晶体光开关

提出了一种调节液晶光子晶体光子带隙的方法。二维三角介质柱形光子晶体位于2块熔凝石英片之间,在介质柱之间填充各向同性排列的液晶,受偏振紫外光照射后,光诱导液晶分子定向排列,通过光诱导液晶分子取向改变液晶的折射率。数值模拟结果表明：通过外界光场控制所填充的向列相液晶分子的方向可以对这种二维三角形介质柱光子晶体的禁带结构进行调节。该可调光子晶体可控制波导中TM模和TE模的选择性传输,因而可应用于制作全光光开关。     

Polarization dependent guiding in liquid crystal filled photonic crystal fibers

A theoretical study of nematic liquid crystal filled photonic crystal fibers (LCPCFs) is presented. Detailed investigations including the polarization dependent bandgap formation and the modal properties are given for LCPCFs, in which alignment of the molecules could be controlled by external static electric field. The polarization dependent bandgap splitting caused by the high index difference between the ordinary and the extraordinary dielectric index of nematic liquid crystals provides the possibility of single-mode single-polarization guiding. A polarization operation diagram is proposed to describe the guiding behavior of LCPCFs. The influence of rotation angle ? of the director of liquid crystals on the modal properties is investigated. It is shown that the polarization axis of the guided mode is determined by the rotation angle ?, which could be controlled by external electric field.     

向列相液晶缺陷光子晶体透射光谱偏振敏感特性研究

研究了向列相液晶缺陷TiO2和SiO2交替的光学多层膜一维光子晶体透射谱偏振敏感特性。外电压下透射光谱测试和模拟结果显示,对于平行取向的向列相液晶,当自然光垂直入射时,禁带中两处出现e(TE模式)光和o光(TM模式)透射峰,具有偏振敏感性。随着电压增大,e光透射峰蓝移与o光透射峰合二为一,光谱可调谐范围分别为31和34nm;而对于取向混乱的向列相液晶,禁带中两处出现独立的透射峰,无偏振敏感性。随着电压增大峰位也蓝移,光谱可调谐范围分别为64和15nm。通过混乱取向液晶分子,可以使o光和e光有效折射率值相等,获得偏振不敏感特性。     

Light extraction from a light emitting diode with photonic structure in the surface layer investigated by NSOM

We present a light emitting diode with a two-dimensional photonic crystal structure prepared by interference lithography at the light emitting diode surface. The emission maximum is at 850 nm. The two-dimensional photonic crystal structure enhanced the light extraction efficiency by a factor of 1.39. The photonic crystal light emitting diode surface morphology was analyzed by atomic force microscopy. The enhanced extraction efficiency of the photonic crystal diode was documented from L(I) dependencies and was confirmed by near-field studies.     

液晶调制的光子晶体可控偏光片和光开关

与介质柱型光子晶体相比，空气孔光子晶体更易于制作和集成而更有应用价值.采用平面波展开法证实了填充液晶的二维三角形分布的空气孔光子晶体方向能隙的可调节性.数值模拟结果表明：1)通过外界电场控制空气孔中所填充的相列液晶的方向可以对光子晶体的方向能隙进行调节，这种可调节性可用于制作场敏偏光片.这与Liu等人研究介质柱型光子晶体的结论相类似；2)用phenylacetylene型液晶替代5CB液晶作为填充物质所得到的空气孔光子晶体偏光片可使用的频率范围显著增大.在此基础上，还研究了填充液晶的光子晶体波导传输谱线的可调节性对特定波长的光切断和开通控制的原理，实现了与以往光开关原理不同的光子晶体光开关. 关键词： 光子晶体 液晶 可调节性 平面波展开法 场敏偏光片     

Air waveguide in a hybrid 1D and 2D photonic crystal hetero-structure

An air waveguide in hybrid one-dimensional photonic crystal and two-dimensional photonic crystal slab hetero-structure is designed. Light propagating in air waveguide can be confined by two-dimensional photonic crystal slab in x-y plane and one-dimensional photonic crystal films in z direction. Theoretical calculations show that air waveguide in the hetero-structure can achieve some functions as 3D PhCs but could be made more easily than 3D PhCs.     

Tuning of the photonic band gaps and the reflection spectra of a one-dimensional photonic crystal based on silicon and a liquid crystal

The reflection spectra and the photonic band gaps of a one-dimensional composite photonic crystal are calculated for different filling factors (the ratio of the thickness of a silicon layer to the lattice constant A). A change in the refractive index of the filler in a photonic crystal leads to the shift of both edges for certain side photonic bands. It is shown that, with a change in the refractive index from 1.49 to 1.69, the shift of the edges (the tuning effect) can reach the value A/λ = 0.04 for the main photonic band and 0.08 for a side band. An additional criterion for designing a photonic crystal is the estimation of the sharpness of the edges of photonic bands in the reflection spectra.     

Design and analysis of thermally tunable liquid crystal filled hybrid photonic crystal fiber coupler

We propose a novel tunable photonic crystal fiber (PCF) coupler scheme, that the light is coupled between a total internal reflection (TIR) guiding core and a photonic bandgap (PBG) guiding core. By introducing the thermo-optic responsive nematic liquid crystals (NLC) into the air holes around the PBG core, the hybrid PCF based coupler exhibits enhanced thermal tunability. The thermo-optical characteristics of the proposed coupler are numerically studied using finite element method (FEM) and beam propagation method (BPM). The proposed design can find promising applications in filtering and sensing devices.     

Temperature tuning of polarization mode dispersion in single-core and two-core photonic liquid crystal fibers

In this paper we present numerical and experimental results of propagation and polarization properties of the photonic liquid crystal fibers (PLCFs) in which only selected micro holes were filled with nematic liquid crystal (LC) guest materials. As a host photonic crystal fiber (PCF) structure, we used a commercially available highly birefringent PCF (Blazephotonics, UK). A tunable laser operated at infrared has powered the PLCFs under investigation infiltrated by the 1550 nematic LC synthesized at the Military University of Technology. Temperature induced changes of the polarization mode dispersion (PMD) as well switching between fundamental and higher order modes and also single-core and two-core propagation were successfully demonstrated.     

Absolute photonic band gaps in a two-dimensional photonic crystal with hollow anisotropic rods

The plane-wave expansion method is used to calculate photonic band gaps for two structures with hollow anisotropic tellurium (Te) rods. Both structures are found to have absolute band gaps at the low- and high-frequency regions. Compared with the photonic crystal with solid Te rods, the photonic crystal with hollow Te rods has a large absolute band gap at the high-frequency region: for the triangular lattice of oval hollow Te rods, there is an absolute band gap of 0.058w_e (w_e=2πc/a), and for the square lattice of square hollow Te rods, there is an absolute band gap of 0.056w_e.     

Low group velocity in a photonic crystal coupled-cavity waveguide

A two-dimensional photonic crystal coupled-cavity waveguide is designed and optimized, the transmission spectrum is calculated by using the finite-difference time-domain method, and the group velocity of c/1856 is obtained. To our knowledge, this value of group velocity is the lowest group velocity in a photonic crystal waveguide calculated from its transmission spectrum so far. The result is confirmed by the photonic band structure calculated by using the plane wave expansion method, and it is found that the photonic crystal waveguide modes in a photonic band structure are in accordance with those in the transmission spectrum by using the finite-difference time-domain method. The mechanism of slow light in the coupled-cavity waveguide of photonic crystal is analysed.     

Effect of anisotropy on the photonic band gap and surface polaritons of a one-dimensional single-negative photonic crystal

The effect of anisotropy on the photonic band structure and surface polaritons of a one-dimensional photonic crystal made of uniaxially anisotropic epsilon-negative (ε<0,μ>0) and mu-negative (ε>0,μ<0) metamaterials is theoretically investigated. Two different cases of uniaxially anisotropic epsilon-negative and mu-negative metamaterials are considered. It is found out that for one case of anisotropy, one-dimensional photonic crystal does not have any single-negative band gap. As a result, it can not support the surface polaritons. While, for another case, the structure shows single-negative band gaps. So, the surface polaritons can be excited at the interface of such a photonic crystal. However, these surface polaritons, unlike the isotropic case, are not omnidirectional and they are restricted to a limited rang of the propagation constant.     

Application of fast Pade approximation in simulating photonic crystal nanocavities by FDTD technology

The exact calculation of mode quality factor Q is a key problem in the design of high-Q photonic crystal nanocavity. On the basis of further investigation on conventional Pade approximation, FDM and DFT, Pade approximation with Baker’s algorithm is enhanced through introducing multiple frequency search and parabola interpolation. Though Pade approximation is a nonlinear signal processing method and only short time sequence is needed, we find the different length of sequence requirements for 2D and 3D FDTD, which is very important to obtain convergent and accurate results. By using the modified Pade approximation method and 3D FDTD, the 2D slab photonic crystal nanocavity is analyzed and high-Q multimode can be solved quickly instead of large range high-resolution scanning. Monitor position has also been investigated. These results are very helpful to the design of photonic crystal nanocavity devices.     

Analysis of photonic crystal fibers infiltrated with nematic liquid crystal

The spectral characteristic of a nematic liquid crystal photonic crystal fiber is analyzed. The locations of the transmission minima in the transmission spectrum can be evaluated by examining the modal cutoffs of specific modes in the liquid crystal inclusion. The selection criteria for these specific modes are based on the fraction of power residing in the core. Explicit expressions for these modal cutoffs are also derived.