Cu_2O多孔纳米微球修饰电极检测NADH

将超声化学法合成的具有较大孔径和表面积的Cu_2O多孔纳米微球和Nafion膜、N,N-二甲基甲酰胺(DMF)混合滴加到玻碳电极(GC)表面,制成Cu_2O/Nafion/DMF-GC修饰电极.在pH=7.0的磷酸盐缓冲溶液(PBS)中,烟酰胺腺嘌呤二核苷酸(NADH)能在该修饰电极表面有效聚集,并在600 mV处出现灵敏的氧化峰.在不同的底液中pH值对检测影响较大,当pH=7.0时,检测效果最好,峰电流与NADH浓度在0.01～20 mmol·~(-1)范围内呈良好的线性关系,检出限为3.34 μmol·~(-1).将Cu_2O-GC和Cu_2O/Nafion/DMF-GC电极进行比较表明,Cu_2O/Nafion/DMF-GC电极具有更好的检测能力,且抗干扰性和稳定性好.     

普鲁士蓝/CdS纳米复合物电致化学发光及其H2O2传感应用

通过一定体积比的CdS和普鲁士蓝(PB)胶体纳米溶液的简单混合,制备了PB/CdS纳米复合物。在共反应剂存在条件下,PB纳米粒子含量较低时,在ITO电极上CdS纳晶的电致化学发光(ECL)强度可以增强3倍左右。PB纳米粒子含量较高时,CdS纳晶的ECL强度则显著降低。详细讨论了PB纳米粒子对CdS纳晶ECL影响的机理。PB纳米粒子对CdS纳晶的ECL增强可用于H2O2传感。该传感器对H2O2响应的线性范围为3.3×10-8～6.5×10-3 mol.L-1(R=0.999 2),检测限为12 nmol.L-1(S/N=3),传感器具有良好的稳定性和重现性。     

CdTe/Mn3 O4/SiO2荧光/磁共振双模成像纳米球的制备与表征

成功地制备了CdTe/Mn_3O_4/SiO_2核壳结构的荧光/磁共振成像双功能纳米球,并用透射电镜(TEM)、能谱分析(EDXA)、磁共振成像(MRI)、红外、荧光光谱等对其结构、磁共振成像和发光性能进行了表征。TEM照片显示所合成的纳米球具有明显的球形核壳结构。EDXA分析显示所制备的CdTe/Mn_3O_4/SiO_2纳米球表面只检测到Si和O元素,证明CdTe量子点和Mn_3O_4纳米立方体被成功地包被于二氧化硅纳米球之内。荧光发射光谱显示相对于CdTe量子点,CdTe/Mn_3O_4/SiO_2纳米球荧光发射光谱虽然发生了一定的蓝移,但是仍具有良好的荧光性能。MRI分析可知CdTe/Mn_3O_4/SiO_2纳米球的弛豫参数(r_1)为3.88 s~(-1)(mg·L~(-1))~(-1),说明所合成的CdTe/Mn_3O_4/SiO_2纳米球可用于T_1-加权磁共振成像。细胞毒性实验表明,当CdTe/Mn_3O_4/SiO_2溶液浓度达到300μg·mL~(-1)时,细胞活力仍可达到90%以上,表明此浓度对细胞的毒性作用较弱。     

Fe_3O_4/CdTe/聚氨酯纳米复合物的制备及其性能研究

由共沉淀法和Stober法制备了伯胺基功能化SiO2稳定的Fe3O4磁性纳米粒子Fe3O4@SiO2-NH2;Fe3O4@SiO2-NH2与二异氰酸酯及咪唑阳离子二醇、聚乙二醇的反应使其表面形成阳离子型聚氨酯稳定层;通过阳离子型聚氨酯与CdTe量子点表面修饰的巯基乙酸间的电荷相互作用,制备得到了Fe3O4/CdTe/聚氨酯纳米复合物.用X射线衍射(XRD)、红外吸收光谱(FTIR)、热重分析(TGA)、透射电子显微镜(TEM)、磁强计(VSM)、紫外吸收光谱(UV)、荧光发射光谱(PL)表征了该纳米复合物的结构与性能.结果表明,CdTe量子点均匀地分散在Fe3O4@SiO2磁性纳米粒子周围,所得纳米复合物在溶剂中分散均匀,不团聚,且具有超顺磁性,并保持了CdTe量子点的荧光性能.     

新型Fe3O4纳米颗粒修饰玻碳电极对头孢噻肟钠的电催化还原及其测定

采用滴涂法将Fe3O4磁性纳米颗粒修饰在玻碳电极上,制得新型纳米Fe3O4修饰电极(Fe3O4-np/GC 电极).X射线衍射光谱表明,纳米Fe3O4为面心立方尖晶石结构,透射电子显微镜表明,纳米Fe3O4粒径15～20 nm的微球结构.采用扫描电子显微镜和交流阻抗法(EIS)对修饰电极表面进行了表征,发现纳米Fe3O4在电极表面形成了均匀的修饰膜.采用循环伏安法(CV)、微分脉冲伏安法(DPV)研究了头孢噻肟钠(CS)在修饰电极上的电化学行为及动力学性质,结果表明,CS在Fe3O4-np/GC电极上有敏锐的催化还原峰,且CS的还原峰电流与其浓度在7.0×10-8～1 ×10-6和1 ×10-6～4.5×10-5 mol/L范围内呈线性关系;检出限达到5.0×10-8 mol/L.该方法可用于市售头孢噻肟钠针剂中CS含量的测定,加标回收率达到96.6％～102.7％.     

金属氧化物(Fe2O3, CuO,NiO)改性对TiO2纳米管阵列光电催化活性的增强效应

采用阳极氧化法和阴极电沉积法制备了Fe2O3,CuO和NiO纳米粒子改性的高度有序的TiO2纳米管(TiO2-NT)阵列.运用场发射扫描电子显微镜(FE-SEM),透射电子显微镜(TEM),X射线衍射(XRD)和紫外-可见漫反射光谱等手段对Fe2O3/TiO2-NT、CuO/TiO2-NT和NiO/TiO2-NT复合电极进行表征.以苯酚为模拟污染物,考察复合电极的光电性能.结果表明,金属氧化物(Fe2O3,CuO,NiO)纳米粒子成功沉积在TiO2-NTs的管口、内壁和管底.金属氧化物改性复合电极的光电催化活性比未改性的TiO2-NTs提高了2倍以上.Fe2O3/TiO2-NTs在可见光区显示出最高的吸收强度.以Fe2O3/TiO2-NTs为阳极处理苯酚废水,光照120min后苯酚去除率达到96%,而未改性的TiO2-NTs的苯酚去除率只有41%.此外,Fe2O3/TiO2-NTs在生成低毒中间产物方面表现出良好的性能.较高的复合电极光电催化活性主要是由于TiO2纳米管和过渡金属氧化物纳米粒子间构筑的高界面面积异质纳米结构,有效地促进了电子转移,抑制了光生电子-空穴对的复合.     

CoFe2O4/CdS纳米复合物的制备、表征及其声催化降解有机染料污染物

在低温(200℃)下采用一步水热分解CoFe2O4纳米粒子表面的镉二硫代氨基甲酸酯配合物制备了磁性CoFe2O4/CdS纳米复合物,运用X射线衍射、红外光谱、扫描电镜、X射线能量散射谱、紫外-可见光谱、透射电镜(TEM)、N2吸附-脱附、X射线光电子能谱和振动样品磁强计对所制样品进行了表征.TEM结果表明,CoFe2O4/CdS纳米复合物由几乎均一的约20nm球形纳米粒子组成.光吸收谱显示该样品的带隙为2.24 eV,很适合用于声/光催化降解有机污染物.在紫外光照射下评价了CoFe2O4/CdS纳米复合物的声催化H2O2辅助降解甲基蓝、罗丹明B和甲基橙反应活性.结果表明,该纳米复合物对这3种染料均表现出很好的声催化活性(5-9 min内完全降解).另外,比较实验结果表明,CoFe2O4/CdS纳米复合物是一个比纯CdS更高效的声催化剂.因此,纳米复合是一种非常好的提高CdS声催化活性的手段.该CoFe2O4/CdS纳米复合物表现出的磁性使其很容易从反应混合物中分离出来而重复使用.     

CdTe/CdS共敏化TiO2电极材料的制备与光电性能

将电沉积法和化学浴沉积法结合,分别将CdTe和CdS量子点纳米晶材料引入到TiO_2纳米管阵列上制备CdTe/CdS量子点共敏化TiO_2光电极。利用扫描电镜、X射线衍射和X射线能量色散光谱等测试手段对所得样品的形貌、晶型和组分进行表征。在模拟太阳光照射条件下,通过电化学工作站测试其光电化学性能。研究结果表明,相对于单一量子点敏化CdS/TiO_2和CdTe/TiO_2光电极而言,共敏化CdTe/CdS/TiO_2光电极表现出更好的光电转化性能,短路电流密度和光电转换效率分别可以达到3.1 m A·cm~(-2)和1.85%。此外,采用电化学阻抗测试技术对材料性能提升的原因进行深入的探究。     

纳米金与磁性纳米复合物构建电流型免疫传感器的研究

制备了易于磁性分离、硫堇(Thi)包覆的四氧化三铁(Fe3O4)纳米复合物。通过静电吸附作用,将萘酚(Nafion)、Thi包覆的Fe3O4复合纳米粒子层层修饰到玻碳电极表面,再利用Thi分子中的氨基吸附纳米金,最后固载甲胎蛋白抗体,从而制得灵敏度高、稳定性好的无试剂电流型甲胎蛋白免疫传感器。实验通过透射电子显微镜(TEM)对该复合纳米粒子进行表征,并用循环伏安法考察了电极的电化学特性。结果表明,Fe3O4/Thi复合纳米粒子修饰的电极在实验过程中呈现出良好的氧化还原活性,其检测范围为0.05～20μg/L,检出限为0.03μg/L。     

Ce0.67Zr0.33O2对CH4燃烧催化剂Fe2O3/Al2O3的改性作用

固定n(Ce)/n(Zr)比为0.67/0.33, 用共沉淀法制得一系列CeO2-ZrO2-Al2O3固溶体. 采用这些固溶体作载体, 以Fe2O3为活性组分, 用浸渍法制备了一系列催化剂. BET结果显示, 将适量Ce0.67Zr0.33O2引入到Al2O3载体中有助于催化剂保持较高的比表面积. TPR结果显示, 载体中引入适量的Ce0.67Zr0.33O2可以改善催化剂的氧化还原性能. XRD结果表明, Fe2O3在CeO2-ZrO2-Al2O3载体上呈现出良好的分散状况, 老化前后催化剂的晶相结构基本无明显变化. 特别是当载体中m(Ce0.67Zr0.33O2)∶m(Al2O3)的值为1∶2时, Fe2O3/CeO2-ZrO2-Al2O3催化剂在甲烷催化燃烧中显示出最佳的催化性能和抗高温老化性能.     

Electrodeposited nanogold decorated graphene modified carbon ionic liquid electrode for the electrochemical myoglobin biosensor

In this paper, a carbon ionic liquid electrode (CILE) was fabricated using ionic liquid 1-hexylpyridinium hexafluorophosphate as modifier, which was further in situ electrodeposited with graphene (GR) and gold nanoparticles step by step to get an Au/GR nanocomposite modified CILE. Myoglobin (Mb) was further immobilized on the Au/GR/CILE surface with Nafion film to get the modified electrode denoted as Nafion/Mb/Au/GR/CILE. Cyclic voltammetric experiments indicated that a pair of well-defined quasi-reversible redox peaks appeared in pH 3.0 phosphate buffer solution with the formal potential (E ^0′) located at ?0.197 V (vs. saturated calomel electrode), which was the typical characteristics of Mb heme Fe(III)/Fe(II) redox couples. Thus, the direct electron transfer rate between Mb and the modified electrode was promoted due to the high conductivity and increased surface area of Au/GR nanocomposite present on electrode surface. Based on the cyclic voltammetric data, the electrochemical parameters of Mb on the modified electrode were calculated. The Mb-modified electrode showed excellent electrocatalytic activities towards the reduction of trichloroacetic acid and H₂O₂ with wider linear range and lower detection limit. Using GR and Au nanoparticles modified CILE, a new third-generation electrochemical Mb biosensor was constructed with good stability and reproducibility.     

Fabrication of a Nanobiocomposite Film Containing Heme Proteins and Carbon Nanotubes on a Choline Modified Glassy Carbon Electrode: Direct Electrochemistry and Electrochemical Catalysis

A nanocomposite electrochemical sensing film is assembled on choline (Ch) modified glassy carbon electrode (GCE), which contains multiwalled carbon nanotubes (MWNTs), Nafion cation exchanger, and myoglobin (Mb) or hemoglobin (Hb). The MWNTs provide a 3D porous and conductive network for the enzyme immobilization and Nafion acts as polymeric binder to give cast thin films. Both MWNTs and Nafion provide negative functionalities to bind to the positively charged redox proteins and to attach at the positively charged Ch modified layer, and drive the formation of homogeneous and stable nanocomposite film, the MWNT‐Nafion‐Mb. The nanocomposite film was characterized by field emission scanning electron microscope (FE‐SEM). The Mb in the nanocomposite film showed a pair of well‐defined and nearly reversible cyclic voltammetric peaks at about ?0.32 V vs. SCE at pH 7.0 solution for the heme Fe(III)/Fe(II) redox couple. The immobilized heme proteins can display the features of peroxidase in electrocatalytic reductions of oxygen, hydrogen peroxide, nitric oxide, trichloroacetic acid (TCA), and bromate.     

Boron Nitride Nanosheet Modified Electrode: Preparation and Application to Direct Electrochemistry of Myoglobin

An ionic liquid modified carbon paste electrode (CILE) was prepared with 1‐hexylpyridine hexafluorophosphate (HPPF₆) and used as a substrate electrode. Then hexagonal boron nitride (BN) nanosheet, myoglobin (Mb) and Nafion were fixed on the electrode surface by coating method to get a new‐style chemically modified electrode (Nafion/Mb/BN/CILE). The morphology and crystal phase of BN nanosheet were characterized by SEM, TEM and XRD. UV‐Vis and FT‐IR results showed that Mb retained its original conformation in the composite modified film. In phosphate buffer solutions (PBS) with pH 3.0, cyclic voltammetry (CV) was performed to investigate the direct electrochemical behaviour of Mb. A pair of quasi‐reversible redox reaction peaks was obtained on the CV curve, proving that BN nanosheet had good biocompatibility and could accelerate electron transfer between Mb and electrode surface. Electrocatalytic reduction of trichloroacetic acid (TCA) was investigated, which was further applied to TCA detection. The catalytic reduction peak current at ?0.355 V depended linearly on the TCA concentration in the range of 0.2～30.0 mmol/L with the equation of Ipc (μA)=6.340 C (mmol/L)+0.305 (r=0.998), and the detection limit was 0.05 mmol/L (3 σ).     

Electrochemistry and electrocatalysis of hemoglobin in Nafion/nano-CaCO3 film on a new ionic liquid BPPF6 modified carbon paste electrode

Room temperature ionic liquid N-butylpyridinium hexafluorophosphate (BPPF6) was used as a binder to construct a new carbon ionic liquid electrode (CILE), which exhibited enhanced electrochemical behavior as compared with the traditional carbon paste electrode with paraffin. By using the CILE as the basal electrode, hemoglobin (Hb) was immobilized on the surface of the CILE with nano-CaCO3 and Nafion film step by step. The Hb molecule in the film kept its native structure and showed good electrochemical behavior. In pH 7.0 Britton-Robinson (B-R) buffer solution, a pair of well-defined, quasi-reversible cyclic voltammetric peaks appeared with cathodic and anodic peak potentials located at -0.444 and -0.285 V (vs SCE), respectively, and the formal potential (E degrees') was at -0.365 V, which was the characteristic of Hb Fe(III)/Fe(II) redox couples. The formal potential of Hb shifted linearly to the increase of buffer pH with a slope of -50.6 mV pH-1, indicating that one electron transferred was accompanied with one proton transportation. Ultraviolet-visible (UV-vis) and Fourier transform infrared (FT-IR) spectroscopy studies showed that Hb immobilized in the Nafion/nano-CaCO3 film still remained its native arrangement. The Hb modified electrode showed an excellent electrocatalytic behavior to the reduction of H2O2, trichloroacetic acid (TCA), and NaNO2.     

Fabrication and biocompatible characterization of magnetic hollow capsules

Monodispersed Fe3O4/polypyrrole （PPy） hollow particles were synthesized via controllable in-situ deposition and polymerization techniques using poly（styrene-co-acrylic） （PSA） latex as template. Field-dependent magnetization plot illustrates that the capsules are superparamagnetic at 300 K. FTIR spectrum confirms that the myoglobin （Mb） molecule adsorbed on the surface of Fe3O4/PPy hollow particle essentially retains its native structure. Furthermore, direct electrochemistry of Mb can be realized on Fe3O4/PPy capsules modified pyrolytic graphite disk electrode, which indicates that the magnetic conductive polymer capsules can promote the electron transfer of protein.     

Direct Electrochemistry of Myoglobin in a Nafion‐Ionic Liquid Composite Film Modified Carbon Ionic Liquid Electrode

In this paper two kinds of ionic liquids (ILs) were used for the construction of a myoglobin (Mb) electrochemical biosensor. Firstly a hydrophilic ionic liquid of 1‐ethyl‐3‐methylimidazolium tetrafluoroborate (EMIMBF₄) was used as binder to prepare a carbon ionic liquid electrode (CILE), then a Nafion and hydrophobic ionic liquid of 1‐butyl‐3‐methylimidazolium hexafluorophosphate (BMIMPF₆) composite film was applied on the surface of the CILE. The direct electrochemistry of Mb in the Nafion‐BMIMPF₆/CILE was achieved with the cathodic and anodic peak potentials located at ?0.345 V and ?0.213 V (vs. SCE). The formal potential (E°′) was located at ?0.279 V, which was the characteristic of Mb Fe^III/Fe^II redox couples. The electrochemical behaviors of Mb in the Nafion‐ionic liquid composite film modified CILE were carefully investigated. The Mb modified electrode showed good electrocatalytic behaviors to the reduction of trichloroacetic acid (TCA) and NaNO₂. Based on the Nafion‐BMIMPF₆/Mb/CILE, a new third generation reagentless biosensor was constructed.     

Myoglobin/sol-gel film modified electrode: direct electrochemistry and electrochemical catalysis

Direct electrochemical and electrocatalytic behavior of myoglobin (Mb) immobilized on carbon paste electrode (CPE) by a silica sol-gel film derived from tetraethyl orthosilicate was investigated for the first time. Mb/sol-gel film modified electrodes show a pair of well-defined and nearly reversible cyclic voltammetric peaks for the Mb Fe(III)/Fe(II) redox couple at about -0.298 V (vs Ag/AgCl) in a pH 7.0 phosphate buffer solution. The formal potential of the Mb heme Fe(III)/Fe(II) couple shifted linearly with pH with a slope of 52.4 mV/pH, denoting that an electron transfer accompanies single-proton transportation. An FTIR and UV-vis spectroscopy study confirms that the secondary structure of Mb immobilized on an electrode by a sol-gel film still maintains the original arrangement. The immobilized Mb displays the features of a peroxidase and acts in an electrocatalytic manner in the reduction of oxygen, trichloroacetic acid (TCA), and nitrite. In comparison to other electrodes, the chemically modified electrodes used in this study for direct electrochemistry and electrocatalysis of Mb are easy to fabricate and fairly inexpensive. Consequently, the Mb/sol-gel film modified electrode provides a convenient way to perform electrochemical research on this kind of protein. It also has potential use in the fabrication of bioreactors and third-generation biosensors.     

肌红蛋白-纳米氧化铝模板-金胶复合组装体的直接电化学与电催化

将肌红蛋白(Mb)固定在纳米氧化铝(AAO)模板-金胶复合组装体修饰玻碳电极表面,制得Mb/AAO/Au colloid/GC薄膜电极.在pH=5.4的HAc-NaAc缓冲溶液中,该薄膜电极于-0.21 V(vs.Ag/AgC l)处有一对准可逆的氧化还原峰,为Mb血红素辅基Fe(Ⅲ)/Fe(Ⅱ)电对的特征峰.在AAO/Au colloid薄膜的微环境中,Mb与玻碳电极间的电子传递明显加快,该Mb/AAO/Au colloid/GC薄膜电极还可用于过氧化氢和溶解氧的催化还原.     

Nafion-stabilized magnetic nanoparticles (Fe3O4) for [Ru(bpy)3]2+(bpy = bipyridine) electrogenerated chemiluminescence sensor

A highly sensitive and stable [Ru(bpy)3]2+ ECL sensor has been fabricated based on the multilayer films of Nafion-stabilized magnetic nanoparticles (Nafion/Fe3O4) formed on a platinum electrode surface by means of an external magnet.