Transition state for alkyl group hydrogenation on Pt(111)

Substituent effects have been used to probe the characteristics of the transition state to hydrogenation of alkyl groups on the Pt(111) surface. Eight different alkyl and fluoroalkyl groups have been formed on the Pt(111) surface by dissociative adsorption of their respective alkyl and fluoroalkyl iodides. Coadsorption of hydrogen and alkyl groups, followed by heating of the surface, results in hydrogenation of the alkyl groups to form alkanes, which then desorb into the gas phase. Temperature-programmed reaction spectroscopy was used to measure the barriers to hydrogenation, DeltaE(H)(double dagger), which are dependent on the size of the alkyl group (polarizability) and the degree of fluorination (field effect). This example is one of only two surface reactions for which the influence of the substituents on DeltaE(H)(double dagger) has been correlated with both the field and the polarizability substituent constants of the alkyl groups in the form of a linear free energy relationship. Increasing both the field and the polarizability constants of the alkyl groups increases the value of DeltaE(H)(double dagger). The substituent effects are quantified by a field reaction constant of rho(F) = 27 +/- 4 kJ/mol and a polarizability reaction constant of rho(alpha) = 19 +/- 3 kJ/mol. These suggest that the transition state for hydrogenation is slightly cationic with respect to the alkyl group on the Pt(111) surface, RC + H <--> {RC(delta+)...H}(double dagger).     

Does alpha-fluorination affect the structural trans-influence and kinetic trans-effect of an alkyl ligand? Molecular structures of Pd(TMEDA)(CH(3))(R(F)) and a kinetic study of the trans to cis isomerization of Pt(TMEDA)(CH(3))(2)I(R(F)) [R(F) = CF(2)CF(3), CFHCF(3), CH(2)CF(3)

Reaction of Pd(TMEDA)(CH(3))(2) [TMEDA = tetramethylethylenediamine] with fluoroalkyl iodides R(F)I affords a series of square planar Pd(II) complexes Pd(TMEDA)(CH(3))(R(F)) [R(F) = CF(2)CF(3) (9), CFHCF(3) (10), CH(2)CF(3) (11)], presumably by oxidative addition followed by reductive elimination of CH(3)I. The solid-state structures of each compound have been determined by single crystal X-ray diffraction studies, allowing the effect of increasing alpha-fluorination on the structural trans-influence of alkyl ligands to be examined. In these compounds there is no significant difference observed in the trans-influence of the three fluorinated alkyl ligands toward the trans-N atom, although a significant cis-influence on the neighboring methyl ligand is apparent. Oxidative addition of the same series of fluoroalkyl ligands to the corresponding Pt(TMEDA)(CH(3))(2) affords octahedral Pt(IV) complexes trans-Pt(TMEDA)(CH(3))(2)(R(F))I [R(F) = CF(2)CF(3) (12), CFHCF(3) (13), CH(2)CF(3) (14)] as the kinetic products. In each case, subsequent isomerization to the corresponding all cis-isomers is observed; in the case of 13, the stereocenter at the alpha-carbon results in two diastereomeric cis-isomers, which are formed at different rates. The molecular structures of 13 and its more stable all cis-isomer 16b have been crystallographically determined. Kinetic studies of the trans-cis isomerization reactions show the mechanism to involve a polar transition state, presumably involving iodide dissociation, followed by rearrangement of the cation, and iodide recombination. High dielectric solvents increase the rate, but solvent coordinating ability has no effect. Dissolved salts (LiI, LiOTf) show normal accelerative salt effects, with no inhibition in the case of added iodide, consistent with the formation of an intimate ion pair intermediate. The kinetic parameters show that the trans-effects of fluoroalkyl ligands in these compounds follow the order expected from the relative sigma-donor properties of the ligands, with CF(2)CF(3) < CFHCF(3) < CH(2)CF(3).     

Coupling vs surface-etching reactions of alkyl halides on GaAs(100). 2. CH2I2 reactions

Surface reactions of CH2I2 on gallium-rich GaAs(100)-(4 x 1), studied by temperature programmed desorption and X-ray photoelectron spectroscopy (XPS), show CH2I2 adsorbs dissociatively at liquid nitrogen temperatures to form surface chemisorbed CH2(ads) and I(ads) species. Controlled hydrogenation of a fraction of the CH2(ads) species in the chemisorbed layer by the background hydrogen radicals results in a surface layer comprising both CH3(ads) and CH2(ads) species. This hydrogenation step initiates a plethora of further surface reactions involving these two species and I(ads). Thermal activation leads to three sequential methylene insertions (CH2(ads)) into the CH3-surface bond to form three higher alkyl (ethyl (C2), propyl (C3), and butyl (C4)) species, which undergo beta-hydride elimination to evolve the respective higher alkene (ethene, propene, and butene). In competition with beta-hydride elimination, reductive elimination of the ethyl and propyl species with I(ads) occurs to liberate the respective alkyl iodide. Beta-hydride elimination in the alkyls, in the temperature range 420-520 K, is the more dominant pathway, and it is also the rate-limiting step for further chain propagation. The evolution of the alkyl iodides represents the only pathway for the removal of surface iodines in this study and is different from previous investigations where gallium and arsenic iodide etch products (GaI(x), AsI(x) (x = 1-3)) formed instead. The desorption of methane and methyl iodide, formed from surface CH3(ads) species at high temperatures by the reaction between surface methylenes and hydrogens eliminated from the surface C2-C4 alkyls, terminates the chain propagation. We discuss the reaction mechanisms by which the observed reaction products form and postulate reasons for the reaction pathways adopted by the surface species.     

Mechanisms of thermal decomposition of organic monolayers grafted on (111) silicon

The thermal stability of different organic layers on silicon has been investigated by in situ infrared spectroscopy, using a specially designed variable-temperature cell. The monolayers were covalently grafted onto atomically flat (111) hydrogenated silicon surfaces through the (photochemical or catalytic) hydrosilylation of 1-decene, heptadecafluoro-1-decene or undecylenic acid. In contrast to alkyl monolayers, which desorb as alkene chains around 300 degrees C by the breaking of the Si-C bond through a beta-hydride elimination mechanism, the alkyl layers functionalized with a carboxylic acid terminal group undergo successive chemical transformations. At 200-250 degrees C, the carboxyl end groups couple forming anhydrides, which subsequently decompose at 250-300 degrees C by loss of the functional group. In the case of fluorinated alkyl chains, the C-C bond located between CH2 and CF2 units is first broken at 250-300 degrees C. In either case, the remaining alkyl layer is stable up to 350 degrees C, which is accounted for by a kinetic model involving chain pairing on the surface.     

The chemistry of CH2I2 on MoAl alloy thin films formed on dehydroxylated alumina: insight into methylene insertion reactions

The chemistry of diiodomethane is explored in ultrahigh vacuum on a MoAl alloy film grown on planar, dehydroxylated alumina by reaction with molybdenum hexacarbonyl. The majority of the diiodomethane forms methylene species below approximately 250 K, although a small proportion forms CH(2)I((ads)), which hydrogenates to form iodomethane. The majority ( approximately 90%) of the adsorbed methylene species thermally decomposes to carbon and hydrogen. The remainder undergoes several reactions, including partial hydrogenation to form adsorbed methyl species or total hydrogenation to form methane. The methyl species can couple forming ethane or undergo methylene insertion reactions to form alkyl species up to C(4). These form alkenes via a beta-hydride elimination reaction. This chemistry is relatively unique, only having been found previously for Ni(110) surfaces. No such chemistry is found on Ni(100) and Ni(111).     

Theoretical calculation of the dehydrogenation of ethanol on a Rh/CeO2(111) surface

We applied periodic density-functional theory (DFT) to investigate the dehydrogenation of ethanol on a Rh/CeO2 (111) surface. Ethanol is calculated to have the greatest energy of adsorption when the oxygen atom of the molecule is adsorbed onto a Ce atom in the surface, relative to other surface atoms (Rh or O). Before forming a six-membered ring of an oxametallacyclic compound (Rh-CH2CH2O-Ce(a)), two hydrogen atoms from ethanol are first eliminated; the barriers for dissociation of the O-H and the beta-carbon (CH2-H) hydrogens are calculated to be 12.00 and 28.57 kcal/mol, respectively. The dehydrogenated H atom has the greatest adsorption energy (E(ads) = 101.59 kcal/mol) when it is adsorbed onto an oxygen atom of the surface. The dehydrogenation continues with the loss of two hydrogens from the alpha-carbon, forming an intermediate species Rh-CH2CO-Ce(a), for which the successive barriers are 34.26 and 40.84 kcal/mol. Scission of the C-C bond occurs at this stage with a dissociation barrier Ea = 49.54 kcal/mol, to form Rh-CH(2(a)) + 4H(a) + CO(g). At high temperatures, these adsorbates desorb to yield the final products CH(4(g)), H(2(g)), and CO(g).     

Substitutions nucleophiles d'olefines fluorees—I

The nucleophilic substitution of fluorinated alkenes of type C₆H₅CFCFCl proceeds by addition-elimination. The addition occurs on the carbon atom bearing the chlorine atom. The stereospecificity depends on steric hindrance in the transition state of the elimination step. The stereochemical outcome is retention of configuration.     

A comparative ab initio study of the primary hydration and proton dissociation of various imide and sulfonic acid ionomers

We compare the role of neighboring group substitutions on proton dissociation of hydrated acidic moieties suitable for proton exchange membranes through electronic structure calculations. Three pairs of ionomers containing similar electron withdrawing groups within the pair were chosen for the study: two fully fluorinated sulfonyl imides (CF(3)SO(2)NHSO(2)CF(3) and CF(3)CF(2)SO(2)NHSO(2)CF(3)), two partially fluorinated sulfonyl imides (CH(3)SO(2)NHSO(2)CF(3) and C(6)H(5)SO(2)NHSO(2)CF(2)CF(3)), and two aromatic sulfonic acid based materials (CH(3)C(6)H(4)SO(3)H and CH(3)OC(6)H(3)OCH(3)C(6)H(4)SO(3)H). Fully optimized counterpoise (CP) corrected geometries were obtained for each ionomer fragment with the inclusion of water molecules at the B3LYP/6-311G** level of density functional theory. Spontaneous proton dissociation was observed upon addition of three water molecules in each system, and the transition to a solvent-separated ion pair occurred when four water molecules were introduced. No considerable quantitative or qualitative differences in proton dissociation, hydrogen bond networks formed, or water binding energies were found between systems containing similar electron withdrawing groups. Each of the sulfonyl imide ionomers exhibited qualitatively similar results regarding proton dissociation and separation. The fully fluorinated sulfonyl imides, however, showed a greater propensity to exist in dissociated and ion-pair separated states at low degrees of hydration than the partially fluorinated sulfonyl imides. This effect is due to the additional electron withdrawing groups providing charge stabilization as the dissociated proton migrates away from the imide anion.     

Thermal chemistry of 1-methyl-1-cyclopentene and methylene cyclopentane on Pt(111) surfaces: evidence for double-bond isomerization

The thermal chemistry of 1-methyl-1-cyclopentene (1MCp(=)) and methylene cyclopentane (MeCp) was investigated on clean and hydrogen- and deuterium-predosed Pt(111) single-crystal surfaces by temperature-programmed desorption and reflection-absorption infrared spectroscopy. It was found that MeCp isomerizes easily to 1MCp(=) but that the reverse reaction does not occur, at least under our experimental conditions. The MeCp to 1MCp(=) isomerization is aided by the presence of coadsorbed hydrogen, and occurs through the formation of a common 1-methyl-1-cyclopentyl (1MCp-Pt) surface intermediate; that intermediate then undergoes beta-hydride elimination selectively at the ring position to form the 1MCp(=) product. In addition to this isomerization, both 1MCp(=) and MeCp also dehydrogenate on the Pt(111) surface to form a methylcyclopentadiene species, at 325 and 350 K, respectively. A small amount of benzene desorption is detected above 500 K with both reactants, indicative of a ring enlargement reaction. No evidence for the activation of any of the allylic hydrogens was obtained in either molecule.     

A Study of the Solvation Structure of l‐Leucine in Alcohol–Water Binary Solvents through Molecular Dynamics Simulations and FTIR and NMR Spectroscopy

The solvation structures of l ‐leucine (Leu) in aliphatic‐alcohol–water and fluorinated‐alcohol–water solvents are elucidated for various alcohol contents by using molecular dynamics (MD) simulations and IR, and ¹H and ¹³C NMR spectroscopy. The aliphatic alcohols included methanol, ethanol, and 2‐propanol, whereas the fluorinated alcohols were 2,2,2‐trifluoroethanol and 1,1,1,3,3,3‐hexafluoro‐2‐propanol. The MD results show that the hydrophobic alkyl moiety of Leu is surrounded by the alkyl or fluoroalkyl groups of the alcohol molecules. In particular, TFE and HFIP significantly solvate the alkyl group of Leu. IR spectra reveal that the Leu C?H stretching vibration blueshifts in fluorinated alcohol solutions with increasing alcohol content, whereas the vibration redshifts in aliphatic alcohol solutions. When the C?H stretching vibration blueshifts in the fluorinated alcohol solutions, the hydrogen and carbon atoms of the Leu alkyl group are magnetically shielded. Consequently, TFE and HFIP molecules may solvate the Leu alkyl group through the blue‐shifting hydrogen bonds.     

Theoretical studies on the elimination of hydrogen fluoride from alkyl fluoride and its substituent effect

The reaction mechanism of the α, α and α, β elimination of hydrogen fluorides from alkyl fluorides has been studied theoretically. For fluoroethane as a reactant, the transition state (TS) optimized at the level of the 6-31G** basis set shows that the α, β elimination proceeds via a four membered-ring TS with a barrier height 64.6 kcal/mol, while the α, α elimination, via a three-membered ring TS with a 83.7 kcal/mol barrier. Four substituents, CH₃, CN, F, and NH₂, were used to investigate the substituent effect of elimination by using the 3-21G basis set. The calculated barriers show that NH₂-substituted alkyl fluorides favor both the α, α and α, β elimination and these two reactions would be expected to proceed simultaneously. © 1996 John Wiley & Sons, Inc.     

β-氟烷基烯基碘与硫酚负离子的反应

在CH~3CN中,β-氟烷基烯基碘与硫酚负离子能发生消除-加成反应生成碘被取代的产物;硫醇负离子及氧负离子对β-氟烷基烯基碘进攻则生成消除产物氟烷基炔烃。     

Chemical and electrical passivation of silicon (111) surfaces through functionalization with sterically hindered alkyl groups

Crystalline Si(111) surfaces have been alkylated in a two-step chlorination/alkylation process using sterically bulky alkyl groups such as (CH3)2CH- (iso-propyl), (CH3)3C- (tert-butyl), and C6H5- (phenyl) moieties. X-ray photoelectron spectroscopic (XPS) data in the C 1s region of such surfaces exhibited a low energy emission at 283.9 binding eV, consistent with carbon bonded to Si. The C 1s XPS data indicated that the alkyls were present at lower coverages than methyl groups on CH(3)-terminated Si(111) surfaces. Despite the lower alkyl group coverage, no Cl was detected after alkylation. Functionalization with the bulky alkyl groups effectively inhibited the oxidation of Si(111) surfaces in air and produced low (<100 cm s(-1)) surface recombination velocities. Transmission infrared spectroscopy indicated that the surfaces were partially H-terminated after the functionalization reaction. Application of a reducing potential, -2.5 V vs Ag+/Ag, to Cl-terminated Si(111) electrodes in tetrahydrofuran resulted in the complete elimination of Cl, as measured by XPS. The data are consistent with a mechanism in which the reaction of alkyl Grignard reagents with the Cl-terminated Si(111) surfaces involves electron transfer from the Grignard reagent to the Si, loss of chloride to solution, and subsequent reaction between the resultant silicon radical and alkyl radical to form a silicon-carbon bond. Sites sterically hindered by neighboring alkyl groups abstract a H atom to produce Si-H bonds on the surface.     

Influence of coadsorbed hydrogen on ethylene adsorption and reaction on a (radical3 x radical3)R30 degrees-Sn/Pt(111) surface alloy

The effect of surface-bound hydrogen adatoms on adsorption, desorption, and reaction of ethylene (CH(2)=CH(2)) on a (radical3 x radical3)R30 degrees-Sn/Pt(111) surface alloy with theta(Sn) = 0.33 was investigated by using temperature-programmed desorption (TPD) and Auger electron spectroscopy (AES). Preadsorbed H decreased the saturation coverage of chemisorbed ethylene and less H was required to completely block ethylene chemisorption on this alloy than that on Pt(111). This is also the first report of extensive H site-blocking of ethylene chemisorption on Pt(111). Preadsorbed H also decreased the desorption activation energy of ethylene on the alloy surface. The reaction chemistry of ethylene on this Sn/Pt(111) alloy is dramatically different than on the Pt(111) surface: the H-addition reaction channel taking ethylene to ethane on Pt(111) is totally inhibited on the alloy. This is important information for advancing understanding of the surface chemistry involved in hydrogenation and dehydrogenation catalysis.     

State-resolved reactivity of CH4(2nu3) on Pt(111) and Ni(111): effects of barrier height and transition state location

Quantum state-resolved sticking coefficients on Pt(111) and Ni(111) surfaces have been measured for CH4 excited to the first overtone of the antisymmetric C-H stretch (2nu3) at well-defined kinetic energies in the range of 10-90 kJ/mol. The ground-state reactivity of CH4 is approximately 3 orders of magnitude lower on Ni(111) than on Pt(111) for kinetic energies in the range of 10-64 kJ/mol, reflecting a difference in barrier height of 28+/-6 kJ/mol. 2nu3 excitation of CH4 increases its reactivity by more than 4 orders of magnitude on Ni(111), whereas on Pt(111) the reactivity increase is lower by 2 orders of magnitude. We discuss the observed differences in the state-resolved reactivity for the ground state and 2nu3 excited state of methane in terms of a difference in barrier height and transition state location for the dissociation reaction on the two metal surfaces.     

Distinct electronic effects on reductive eliminations of symmetrical and unsymmetrical bis-aryl platinum complexes

Symmetrical bis-aryl platinum complexes (DPPF)Pt(C(6)H(4)-4-R)(2) (R = NMe(2), OMe, CH(3), H, Cl, CF(3)) and electronically unsymmetrical bis-aryl platinum complexes (DPPF)Pt(C(6)H(4)-4-R)(C(6)H(4)-4-X) (R = CH(3), X = NMe(2), OMe, H, Cl, F, CF(3); R = OMe, X = NMe(2), H, Cl, F, CF(3); R = CF(3), X = H, Cl, NMe(2); and R = NMe(2), X = H, Cl) were prepared, and the rates of reductive elimination of these complexes in the presence of excess PPh(3) are reported. The platinum complexes reductively eliminated biaryl compounds in quantitative yields with first-order rate constants that were independent of the concentration of PPh(3). Plots of Log(k(obs)/k(obs(H))) vs Hammett substituent constants (sigma) of the para substituents R and X showed that the rates of reductive elimination reactions depended on two different electronic properties. The reductive elimination from symmetrical bis-aryl platinum complexes occurred faster from complexes with more electron-donating para substituents R. However, reductive elimination from a series of electronically unsymmetrical bis-aryl complexes was not faster from complexes with the more electron-donating substituents. Instead, reductive elimination was faster from complexes with a larger difference in the electronic properties of the substituents on the two platinum-bound aryl groups. The two electronic effects can complement or cancel each other. Thus, this combination of electronic effects gives rise to complex, but now more interpretable, free energy relationships for reductive elimination.     

Dehydroxylation of Glycerol on Pt Surfaces: Ab Initio Molecular Dynamics Study

Glycerol is an important raw material in the chemical industry, and dehydroxylation of glycerol would produce 1, 2-propanediol and 1, 3-propanediol. Here we studied glycerol dehydroxylation with ab initio molecular dynamics simulations on Pt(111) and Pt(211) surfaces at 453 K. The free energies obtained on Pt show that dehydroxylation is more likely to occur at the terminal carbon than the central carbon, and 1, 2-propanediol would be produced preferentially, which is consistent with the selectivity observed experimentally. We found a linear relationship between the free energy barrier and the difference of average distances between O atoms at the initial state and transition state. Although a high correlation between the stability of gaseous glycerol and the number of formed hydrogen bonds is determined from density functional theory calculations, the hydrogen bonds formed within surface structures play a negligible role in determining the free energy barriers of dehydroxylation.     

Competing C-F activation pathways in the reaction of Pt(0) with fluoropyridines: phosphine-assistance versus oxidative addition

A survey of computed mechanisms for C-F bond activation at the 4-position of pentafluoropyridine by the model zero-valent bis-phosphine complex, [Pt(PH3)(PH2Me)], reveals three quite distinct pathways leading to square-planar Pt(II) products. Direct oxidative addition leads to cis-[Pt(F)(4-C5NF4)(PH3)(PH2Me)] via a conventional 3-center transition state. This process competes with two different phosphine-assisted mechanisms in which C-F activation involves fluorine transfer to a phosphorus center via novel 4-center transition states. The more accessible of the two phosphine-assisted processes involves concerted transfer of an alkyl group from phosphorus to the metal to give a platinum(alkyl)(fluorophosphine), trans-[Pt(Me)(4-C5NF4)(PH3)(PH2F)], analogues of which have been observed experimentally. The second phosphine-assisted pathway sees fluorine transfer to one of the phosphine ligands with formation of a metastable metallophosphorane intermediate from which either alkyl or fluorine transfer to the metal is possible. Both Pt-fluoride and Pt(alkyl)(fluorophosphine) products are therefore accessible via this route. Our calculations highlight the central role of metallophosphorane species, either as intermediates or transition states, in aromatic C-F bond activation. In addition, the similar computed barriers for all three processes suggest that Pt-fluoride species should be accessible. This is confirmed experimentally by the reaction of [Pt(PR3)2] species (R = isopropyl (iPr), cyclohexyl (Cy), and cyclopentyl (Cyp)) with 2,3,5-trifluoro-4-(trifluoromethyl)pyridine to give cis-[Pt(F){2-C5NHF2(CF3)}(PR3)2]. These species subsequently convert to the trans-isomers, either thermally or photochemically. The crystal structure of cis-[Pt(F){2-C5NHF2(CF3)}(P iPr3)2] shows planar coordination at Pt with r(F-Pt) = 2.029(3) A and P(1)-Pt-P(2) = 109.10(3) degrees. The crystal structure of trans-[Pt(F){2-C5NHF2(CF3)}(PCyp3)2] shows standard square-planar coordination at Pt with r(F-Pt) = 2.040(19) A.     

烷基氟化物消除氟化氢反应的取代基效应-2

The substituent effect of the 1-1 elimination reaction of hydrogen fluoride from ethyl fluoride have been studied by ab initio method at the HF/3-21G level. The reactants are CH_3CH_2F, CH_3CHF_2, CH_2FCH_2F, CH_3CH_2CH_2F, CH_3CHFCH_3, CH_3CHFCN, CH_2CNCH_2F, CH_2NH_2CH_2F, CH_3CHFNH_2 and their reaction barriers are 369.5, 433.5, 306.9, 365.6, 357.3, 354.1, 383.2, 370.3, 250.3 kJ·mo1~(-1) respectively. It can be concluded that the 1-1 elimination reaction of CH3_CHFNH_2 is the easiest to proceed. This conclusion can be rationalized by its characteristic transition state geometry.     

Computational study of the adsorption and dissociation of phenol on Pt and Rh surfaces

The adsorption of phenol on flat and stepped Pt and Rh surfaces and the dissociation of hydrogen from the hydroxyl group of phenol on Pt(111) and Rh(111) were studied by density functional calculations. On both Pt(111) and Rh(111), phenol adsorbs with the aromatic ring parallel to the surface and the hydroxyl group tilted away from the surface. Furthermore, adsorption on stepped surfaces was concluded to be unfavourable compared to the (111) surfaces due to the repulsion of the hydroxyl group from the step edges. Transition state calculations revealed that the reaction barriers, associated with the dissociation of phenol into phenoxy, are almost identical on Pt and Rh. Furthermore, the oxygen in the dissociated phenol is strongly attracted by Rh(111), while it is repelled by Pt(111).