Phenoxide-assisted P-C bond cleavage in PdCl2(PPh3)2 under very mild conditions

PdCl₂(PPh₃)₂ reacted with NaOAr (Ar = Ph, p-tolyl) at 0 °C to afford PdCl(Ph)(PPh₃)₂, instead of PdCl(OAr)(PPh₃)₂, in 12-16% isolated yields based on Pd. The structure was confirmed by NMR and X-ray crystallography. GC-MS analysis of the reaction solution revealed that OPPh₂(OAr), OPPh(OAr)₂, and OP(OAr)₃ are formed, while NMR studies indicated that PdCl(Ph)(PPh₃)₂ is produced when PdCl(OAr)(PPh₃)₂ decomposes. The reaction of PdCl₂(PPh₃)₂ with Bu₃Sn(OC₆H₄-p-OMe) also gave PdCl(Ph)(PPh₃)₂ in 8% isolated yield. These results suggest that PdCl(OAr)(PPh₃)₂ is highly labile and the aryloxy ligand exchanges with the phenyl groups in triphenylphosphine even under very mild conditions.     

A mild and efficient amidation of cyclic ethers catalyzed by rhodium caprylate

A small quantity of Rh₂(O₂CC₇H₁₅)₄ (2.5 mol % to 0.6 mol %) catalyzed the α-amidation of cyclic ethers under mild conditions, 35 °C, in the presence of electron-withdrawing p-chlorobenzenesulfonamide/PhI(OAc)₂ as the nitrene source, in CH₂Cl₂ for 4 h. The corresponding N-substituted amino cyclic ethers were successfully obtained in good yields (up to 87% based on 99% conversion) and compatibility with other oxidant sensitive structures in one-pot reaction.     

Fe(NO3)3·9H2O-catalyzed aerobic oxidation of sulfi des to sulfoxides under mild conditions with the aid of trifl uoroethanol

Selective oxidation of sulfides to sulfoxides was successfully performed by employing readily available Fe(NO3)3·9H2O as the active catalyst with oxygen as the oxidant in 2,2,2-trifluoroethanol (TFE) without the formation of sulfones. Nitrate anion could play a crucial role in promoting the reaction due to the oxidation capacity under acidic media. High yields of sulfoxides were exclusively obtained from the corresponding sulfides. Furthermore, both aromatic and aliphatic sulfides gave moderate to high yields of sulfoxides with this protocol.     

Theoretical study on the reaction mechanism of (CH3)3CO+CO

The reaction mechanism of (CH₃)₃CO with CO has been theoretically investigated using density-functional theory (DFT) calculations at B3LYP/6-31G* level. In order to get more reliable energy values the single-point energy is evaluated at CCSD (T)/6-31++G** level. The results show that the reaction is multi-channel and the reaction of (CH₃)₃CO radical with CO mostly produces (CH₃)₃C + CO₂. The reaction could play a role in eliminating air pollution.     

Oxalic acid mediated synthesis of WO3·H2O nanoplates and self-assembled nanoflowers under mild conditions

Tungsten oxide hydrate (WO₃·H₂O) nanoplates and flower-like assemblies were successfully synthesized via a simple aqueous method. The effects of reaction parameters in solution on the preparation were studied. Nanoplates and nanoflowers can be selectively prepared by changing the amount of H₂C₂O₄. In-situ assembly of nanoplates to nanoflowers was also proposed for the formation of assembled nanostructures. In addition, the reaction time and temperature have important effects on the sizes of the as-obtained samples. Crystal structure, morphology, and composition of final nanostructures were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). Optical properties of the synthesized samples and the growth mechanism were studied by UV-vis detection. Degradation experiments of Rhodamine B (RhB) were also performed on samples of nanoplates and nanoflowers under visible light illumination. Nanoflower sample exhibited preferable photocatalytic property to nanoplate sample.     

Li_(1.3)Ti_(1.7)Al_(0.3)(PO_4)_3,Na_(1.3)Ti_(1.7)Al_(0.3)(PO_4)_3的离子交换研究

研究了在不同温度下的NaNO3和AgNO3水溶液中Li1.3Ti1.7Al0.3(PO4)3和Na1.3Ti1.7Al0.3(PO4)3离子交换行为.实验表明Li1.3Ti1.7Al0.3(PO4)3和Na1.3Ti1.7Al0.3(PO4)3均显示出了高选择性与Na+和Ag+进行离子交换的特征,且对Ag+的选择性高于Na+.升高温度可显著提高Ag/Li和Ag/Na的交换反应速度.     

反式2-甲基-2-丁烯酸甲酯与臭氧反应机理的计算研究

采用G3B3方法构建反式2-甲基-2-丁烯酸甲酯与O3反应体系以及后续Criegee自由基有、无水分子参与下异构化反应的势能面剖面.结果表明,反式2-甲基-2-丁烯酸甲酯与O3反应首先生成一个稳定的五元环中间体,此中间体按断键位置不同后续裂解反应存在两条路径,分别生成产物P1(CH3CHOO+CH3OC(O)C(CH3)O)和P2(CH3CHO+CH3OC(O)C(CH3)OO).利用经典过渡态理论(TST)并结合Wigner矫正模型计算了200-1200 K温度区间内标题反应的速率常数kTST/W.计算结果显示,294 K时,该反应速率常数为7.55×10-18cm3molecule-1s-1,与Bernard等对类似反应所测实验值非常接近.生成的Criegee自由基(CH3CHOO和CH3OC(O)C(CH3)OO)可分别与水分子发生α-加成及β-氢迁移反应,其中Criegee自由基与水的α-加成反应较其与水的β-氢迁移反应具有优势.另外与无水分子参与CH3CHOO和CH3OC(O)C(CH3)OO异构化反应相比,水分子的参与使得异构化反应较为容易进行.     

Selective aliphatic fluorination by halogen exchange in mild conditions

HF-Base media, in particular (HF)₁₀-pyridine or (HF)₃-triethylamine, allow aliphatic chlorine-fluorine exchanges on acid-sensitive molecules. Depending on the nature (pyridine or triethylamine), stoichiometry of the base and temperature, selective mono-, di-, or tri-chlorine-fluorine exchanges on trichloromethyl groups alpha to sulfur, oxygen and carbon atoms can be obtained.     

Hydration of C3a in the presence of CaCO3

The hydration of C₃A with and without CaCO₃ was studied. The techniques used were X-ray diffraction, thermogravimetry, differential thermogravimetry and calorimetry.In the presence of CaCO₃, the hydration of C₃A is accelerated. The hexagonal hydrates are formed first. They react with CaCO₃ to form calcium carboaluminate hydrate. This reaction blocks formation of the cubic hydrate. The latter appears when CaCO₃ is completely consumed.     

A simple conversion of azlactones into indenones via H3PW12O40/Al2O3 catalyzed intramolecular Friedel-Crafts reaction

A rapid and simple procedure for the synthesis of the indenone derivatives, N-(1-oxo-1H-inden-2-yl)benzamides, via intramolecular Friedel-Crafts (IFC) reaction of (Z)-4-arylidene-2-phenyl-5(4)-oxazolones (azlactones) catalyzed by H₃PW₁₂O₄₀ supported on neutral alumina under microwave irradiation has been developed. The reaction is straightforward and allows easy isolation of the product. The catalyst could be re-used up to four times after simple filtration.     

A fast synthesis for Zintl phase compounds of Na3SbTe3, NaSbTe2 and K3SbTe3 by microwave irradiation

The microwave irradiation technique was used to prepare three Zintl phase compounds Na₃SbTe₃, NaSbTe₂ and K₃SbTe₃. The as-prepared products were analyzed and characterized by XRD, EDX and SEM techniques. Higher microwave oven power and shorter irradiation time are required for the synthesis of Na₃SbTe₃, whereas lower oven power and longer irradiation time are needed for NaSbTe₂. Moderate microwave irradiation conditions facilitate the formation of pure K₃SbTe₃. Pure phase of Na₃SbTe₃ are directly obtained by this technique for the first time. Compared with the traditional high-temperature solid-state synthesis, the microwave reaction required a considerable shortened reaction time for the preparation of the three Zintl compounds. The initial driving force for these reactions originates from the interaction of microwave electric field with alkali metals (Na and K) and Sb powders.     

A new and convenient synthesis of phendiones oxidated by KBrO3/H2SO4 at room temperature

<正>A new method is described to synthesize phendione derivatives from 1,10-phenanthrolines using potassium bromate and 60% sulfuric acid as oxidant,which was easily applicable to scale-up.The reaction conditions are mild and the yields are excellent.The target compounds have been characterized by ~1H NMR,and IR.     

A simple, mild and efficient procedure for selective cleavage of prenyl esters using silica-supported sodium hydrogen sulphate as a heterogenous catalyst

Prenyl esters were selectively and efficiently cleaved under slightly acidic reaction conditions using silica-supported sodium hydrogen sulfate as a heterogenous catalyst at room temperature to regenerate the parent carboxylic acids in very high yields.     

CF3CH2CF2CH3（HFC-365mfc）与Cl原子反应的微观机理及动力学性质

采用密度泛函理论方法 M06-2X结合6-31+G(d,p)基组研究了CF3CH2CF2CH3与Cl原子反应的反应机理.计算获得了CF3CH2CF2CH3的两种可区分的稳定几何构象RC1和RC2以及与它们相对应的8条氢提取反应通道和2条取代反应通道.运用改进的正则变分过渡态理论(ICVT)并结合小曲率隧道效应校正(SCT),在M06-2X/6-31+G(d,p)水平上计算了各氢提取通道的速率常数,并由Boltzmann配分函数得到总包反应的速率常数kT(cm3.molecule-1.s-1).计算结果表明,体系的总反应速率常数与已有实验值相吻合,进而给出了该反应在200～1000 K温度区间内反应速率常数kT的三参数表达式kT=1.88×10-22T3.76.exp(-1780.69/T),并讨论了两种构象RC1和RC2对总反应的贡献及各构象中氢提取发生在—CH3或—CH2—基团上的位置选择性.此外,由于缺少相关反应物及产物自由基标准生成焓ΔHf,298 K的数据,利用等化学键法估算了在上述物种的标准生成焓.     

Theoretical study on the reaction mechanism of (CH<Subscript>3</Subscript>)<Subscript>3</Subscript>CO<Superscript>.</Superscript> radical with NO

The reaction mechanism of (CH₃)₃CO^. radical with NO is theoretically investigated at the B3LYP/6-31G* level. The results show that the reaction is multi-channel in the single state and triplet state. The potential energy surfaces of reaction paths in the single state are lower than that in the triple state. The balance reaction: (CH₃)₃CONO⇔(CH₃)₃CO^.+NO, whose potential energy surface is the lowest in all the reaction paths, makes the probability of measuring (CH₃)₃CO^. radical increase. So NO may be considered as a stabilizing reagent for the (CH₃)₃CO^. radical.     

前驱体法制备Mn_2O_3空心橄榄形结构及形貌演化

利用苹果酸还原高锰酸钾以水热合成方法制备了具有橄榄形貌的纳米结构MnCO3前驱体,通过600℃焙烧MnCO3前驱体得到橄榄形Mn2O3.以扫描电镜(SEM)、透射电镜(TEM)、X射线衍射(XRD)、热重-差热分析(TG-DTA)等方法对产物的形貌和结构进行了表征.考察了MnCO3前驱体微观形貌随水热反应时间的演变:当水热反应时间为2h时得到具有橄榄形形貌的MnCO3前驱体,空心结构的壁比较厚;当水热反应时间延长到6h时得到的MnCO3前驱体仍然具有橄榄形形貌,壁变薄;当反应时间延长到24h时得到的MnCO3前驱体仍然具有橄榄形形貌,并且壁非常薄.我们推测在Ostwald熟化机理作用下,空心橄榄形MnCO3前驱体随着反应时间的延长其壁逐渐由160nm演化为30nm.     

A computer controlled continuous dilution dilatometer for the determination of solute molar volumes and direct measurement of reaction volumes in solution

The design and operation of a computer controlled continuous dilution dilatometer utilizing a diode array detection system is presented. To test the accuracy and reproducibility of the technique, apparent molar volumes of dilute aqueous solutions of potassium ferricyanide and potassium ferrocyanide have been measured. To provide supporting data for high pressure studies of reaction volumes and molar volume change in solutions of high ionic strength, study of these electrolytes was extended by dilution into 0.1M and 1.0M potassium nitrate solutions rather than extrapolation to zero ionic strength as is normal. In addition, the system has been used to determine reaction volumes of some acid-base reactions by direct measurement, using the equipment as an automatic titration dilatometer.     

Effect of 3% Re2O7/60%Al2O3 - 40%SiO2 Catalyst Alkylation Time and Temperature Using Et4Pb on Methyl Erucate Conversion

A study of the alkylation of 3% Re₂O₇/60%Al₂O₃-40%SiO₂ catalyst using tetraethyllead (Et₄Pb)(TEL) shows that the reaction time and temperature affect the catalyst activity and selectivity in the methyl erucate metathesis reaction. This revised version was published online in June 2006 with corrections to the Cover Date.     

Theoretical study on the reaction mechanism of CH4 with CaO

The reaction pathways and energetics for the reaction of methane with CaO are discussed on the singlet spin state potential energy surface at the B3LYP/6-311+G(2df,2p) and QCISD/6-311++G(3df,3pd)//B3LYP/6-311+G(2df,2p) levels of theory. The reaction of methane with CaO is proposed to proceed in the following reaction pathways: CaO + CH₄ → CaOCH₄ → [TS] → CaOH + CH₃, CaO + CH₄ → OCaCH₄ → [TS] → HOCaCH₃ → CaOH + CH₃ or [TS] → CaCH₃OH → Ca + CH₃OH, and OCaCH₄ → [TS] → HCaOCH₃ → CaOCH₃ + H or [TS] → CaCH₃OH → Ca + CH₃OH. The gas-phase methane–methanol conversion by CaO is suggested to proceed via two kinds of important reaction intermediates, HOCaCH₃ and HCaOCH₃, and the reaction pathway via the hydroxy intermediate (HOCaCH₃) is energetically more favorable than the other one via the methoxy intermediate (HCaOCH₃). The hydroxy intermediate HOCaCH₃ is predicted to be the energetically most preferred configuration in the reaction of CaO + CH₄. Meanwhile, these three product channels (CaOH + CH₃, CaOCH₃ + H and Ca + CH₃OH) are expected to compete with each other, and the formation of methyl radical is the most preferable pathway energetically. On the other hand, the intermediates HCaOCH₃ and HOCaCH₃ are predicted to be the energetically preferred configuration in the reaction of Ca + CH₃OH, which is precisely the reverse reaction of methane hydroxylation.     

Hydrosilylation Catalyzed with Rh(PPh3)3Cl/Ionic-Liquid–Functionalized SiO2

Ionic liquid–modified silica has been prepared by a “one-pot” reaction of activated silica, 3-chloropropyltriethoxysilane, and alkylimidazole or pyridine. It was found that the catalytic activity and β-adduct selectivity of the supported catalyst Rh(PPh₃)₃Cl/ionic-liquid–modified-SiO₂ for the hydrosilylation reaction of alkenes with triethoxysilane was significantly improved. Furthermore, the catalyst system could be recovered easily.