Deciphering an Abnormal Layered-Tunnel Heterostructure Induced by Chemical Substitution for the Sodium Oxide Cathode

Demands for large-scale energy storage systems have driven the development of layered transition-metal oxide cathodes for room-temperature rechargeable sodium ion batteries (SIBs). Now, an abnormal layered-tunnel heterostructure Na_0.44Co_0.1Mn_0.9O₂ cathode material induced by chemical element substitution is reported. By virtue of beneficial synergistic effects, this layered-tunnel electrode shows outstanding electrochemical performance in sodium half-cell system and excellent compatibility with hard carbon anode in sodium full-cell system. The underlying formation process, charge compensation mechanism, phase transition, and sodium-ion storage electrochemistry are clearly articulated and confirmed through combined analyses of in situ high-energy X-ray diffraction and ex situ X-ray absorption spectroscopy as well as operando X-ray diffraction. This crystal structure engineering regulation strategy offers a future outlook into advanced cathode materials for SIBs.     

Manipulating Layered P2@P3 Integrated Spinel Structure Evolution for High‐Performance Sodium‐Ion Batteries

Structural evolution of the cathode during cycling plays a vital role in the electrochemical performance of sodium‐ion batteries. A strategy based on engineering the crystal structure coupled with chemical substitution led to the design of the layered P2@P3 integrated spinel oxide cathode Na_0.5Ni_0.1Co_0.15Mn_0.65Mg_0.1O₂, which shows excellent sodium‐ion half/full battery performance. Combined analyses involving scanning transmission electron microscopy with atomic resolution as well as in situ synchrotron‐based X‐ray absorption spectra and in situ synchrotron‐based X‐ray diffraction patterns led to visualization of the inherent layered P2@P3 integrated spinel structure, charge compensation mechanism, structural evolution, and phase transition. This study provides an in‐depth understanding of the structure‐performance relationship in this structure and opens up a novel field based on manipulating structural evolution for the design of high‐performance battery cathodes.     

Suppressing the P2–O2 Phase Transition of Na0.67Mn0.67Ni0.33O2 by Magnesium Substitution for Improved Sodium‐Ion Batteries

Room‐temperature sodium‐ion batteries (SIBs) have shown great promise in grid‐scale energy storage, portable electronics, and electric vehicles because of the abundance of low‐cost sodium. Sodium‐based layered oxides with a P2‐type layered framework have been considered as one of the most promising cathode materials for SIBs. However, they suffer from the undesired P2–O2 phase transition, which leads to rapid capacity decay and limited reversible capacities. Herein, we show that this problem can be significantly mitigated by substituting some of the nickel ions with magnesium to obtain Na_0.67Mn_0.67Ni_0.33?xMg_xO₂ (0≤x≤0.33). Both the reversible capacity and the capacity retention of the P2‐type cathode material were remarkably improved as the P2–O2 phase transition was thus suppressed during cycling. This strategy might also be applicable to the modulation of the physical and chemical properties of layered oxides and provides new insight into the rational design of high‐capacity and highly stable cathode materials for SIBs.     

A Hydrostable Cathode Material Based on the Layered P2@P3 Composite that Shows Redox Behavior for Copper in High‐Rate and Long‐Cycling Sodium‐Ion Batteries

Low‐cost layered oxides free of Ni and Co are considered to be the most promising cathode materials for future sodium‐ion batteries. Biphasic Na_0.78Cu_0.27Zn_0.06Mn_0.67O₂ obtained via superficial atomic‐scale P3 intergrowth with P2 phase induced by Zn doping, consisting of inexpensive transition metals, is a promising cathode for sodium‐ion batteries. The P3 phase as a covering layer in this composite shows not only in excellent electrochemical performance but also its tolerance to moisture. The results indicate that partial Zn substitutes can effectively control biphase formation for improving the structural/electrochemical stability as well as the ionic diffusion coefficient. Based on in situ synchrotron X‐ray diffraction coupled with electron‐energy‐loss spectroscopy, a possible Cu^2+/3+ redox reaction mechanism has now been revealed.     

Research progress of tunnel-type sodium manganese oxide cathodes for SIBs

Among the large energy storage batteries, the sodium ion batteries（SIBs） are attracted huge interest due to the fact of its abundant raw materials and low cost, and has become the most promising secondary battery. Tunnel-type sodium manganese oxides（TMOs） are industrialized cathode materials because of their simple synthesis method and proficient electrochemical performance. Na_0.44MnO₂（NMO） is considered the best candidate material for all tunnel-type structural materials. ...     

Development and Investigation of a NASICON‐Type High‐Voltage Cathode Material for High‐Power Sodium‐Ion Batteries

Herein, we introduce a 4.0 V class high‐voltage cathode material with a newly recognized sodium superionic conductor (NASICON)‐type structure with cubic symmetry (space group P2₁3), Na₃V(PO₃)₃N. We synthesize an N‐doped graphene oxide‐wrapped Na₃V(PO₃)₃N composite with a uniform carbon coating layer, which shows excellent rate performance and outstanding cycling stability. Its air/water stability and all‐climate performance were carefully investigated. A near‐zero volume change (ca. 0.40 %) was observed for the first time based on in situ synchrotron X‐ray diffraction, and the in situ X‐ray absorption spectra revealed the V^3.2+/V^4.2+ redox reaction with high reversibility. Its 3D sodium diffusion pathways were demonstrated with distinctive low energy barriers. Our results indicate that this high‐voltage NASICON‐type Na₃V(PO₃)₃N composite is a competitive cathode material for sodium‐ion batteries and will receive more attention and studies in the future.     

High Performance Full Sodium‐Ion Cell Based on a Nanostructured Transition Metal Oxide as Negative Electrode

A novel design of a sodium‐ion cell is proposed based on the use of nanocrystalline thin films composed of transition metal oxides. X‐ray diffraction, Raman spectroscopy and electron microscopy were helpful techniques to unveil the microstructural properties of the pristine nanostructured electrodes. Thus, Raman spectroscopy revealed the presence of amorphous NiO, α‐Fe₂O₃ (hematite) and γ‐Fe₂O₃ (maghemite). Also, this technique allowed the calculation of an average particle size of 23.4 Å in the amorphous carbon phase in situ generated on the positive electrode. The full sodium‐ion cell performed with a reversible capacity of 100 mA h g^?1 at C/2 with an output voltage of about 1.8 V, corresponding to a specific energy density of about 180 W h kg^?1. These promising electrochemical performances allow these transition metal thin films obtained by electrochemical deposition to be envisaged as serious competitors for future negative electrodes in sodium‐ion batteries.     

Size‐Mediated Recurring Spinel Sub‐nanodomains in Li‐ and Mn‐Rich Layered Cathode Materials

Li‐ and Mn‐rich layered oxides are among the most promising cathode materials for Li‐ion batteries with high theoretical energy density. Its practical application is, however, hampered by the capacity and voltage fade after long cycling. Herein, a finite difference method for near‐edge structure (FDMNES) code was combined with in situ X‐ray absorption spectroscopy (XAS) and transmission electron microscopy/electron energy loss spectroscopy (TEM/EELS) to investigate the evolution of transition metals (TMs) in fresh and heavily cycled electrodes. Theoretical modeling reveals a recurring partially reversible LiMn₂O₄‐like sub‐nanodomain formation/dissolution process during each charge/discharge, which accumulates gradually and accounts for the Mn phase transition. From the modeling of spectra and maps of the valence state over large regions of the cathodes, it was found that the phase change is size‐dependent. After prolonged cycling, the TMs displayed different levels of inactivity.     

Recent Progress of P2-Type Layered Transition-Metal Oxide Cathodes for Sodium-Ion Batteries

Sodium-ion batteries (SIBs) have attracted much attention due to their abundance, easy accessibility, and low cost. All of these advantages make them potential candidates for large-scale energy storage. The P2-type layered transition-metal oxides (Na_xTMO₂; TM=Mn, Co, Ni, Ti, Fe, V, Cr, and a mixture of multiple elements) exhibit good Na⁺ ion conductivity and structural stability, which make them an excellent choice for the cathode materials of SIBs. Herein, the structural evolution, anionic redox reaction, some challenges, and recent progress of Na_xTMO₂ cathodes for SIBs are reviewed and summarized. Moreover, a detailed understanding of the relationship of chemical components, structures, phase compositions, and electrochemical performance is presented. This Review aims to provide a reference for the development of P2-type layered transition-metal oxide cathode materials for SIBs.     

Amorphous MnO2 as Cathode Material for Sodium‐ion Batteries

Amorphous MnO₂ has been prepared from the reduction of KMnO₄ in ethanol media by a facile one‐step wet chemical route at room temperature. The electrochemical properties of amorphous MnO₂ as cathode material in sodium‐ion batteries (SIBs ) are studied by galvanostatic charge/discharge testing. And the structure and morphologies of amorphous MnO₂ are investigated by X‐ray diffraction (XRD ), scanning electron microscopy (SEM ), transmission electron microscopy (TEM ) and Raman spectra. The results reveal that as‐synthesized amorphous MnO₂ electrode material exhibits a spherical morphology with a diameter between 20 and 60 nm. The first specific discharge capacity of the amorphous MnO₂ electrode is 123.2 mAh •g⁻¹ and remains 136.8 mAh •g⁻¹ after 100 cycles at the current rate of 0.1 C. The specific discharge capacity of amorphous MnO₂ is maintained at 139.2, 120.4, 89, 68 and 47 mAh •g⁻¹ at the current rate of 0.1 C, 0.2 C, 0.5 C, 1 C and 2 C, respectively. The results indicate that amorphous MnO₂ has great potential as a promising cathode material for SIBs .     

Electrochemical and Structural Study of Layered P2‐Type Na2/3Ni1/3Mn2/3O2 as Cathode Material for Sodium‐Ion Battery

P2‐type Na_2/3Ni_1/3Mn_2/3O₂ was synthesized by a controlled co‐precipitation method followed by a high‐temperature solid‐state reaction and was used as a cathode material for a sodium‐ion battery (SIB). The electrochemical behavior of this layered material was studied and an initial discharge capacity of 151.8 mA h g^?1 was achieved in the voltage range of 1.5–3.75 V versus Na⁺/Na. The retained discharge capacity was found to be 123.5 mA h g^?1 after charging/discharging 50 cycles, approximately 81.4 % of the initial discharge capacity. In situ X‐ray diffraction analysis was used to investigate the sodium insertion and extraction mechanism and clearly revealed the reversible structural changes of the P2‐Na_2/3Ni_1/3Mn_2/3O₂ and no emergence of the O2‐Ni_1/3Mn_2/3O₂ phase during the cycling test, which is important for designing stable and high‐performance SIB cathode materials.     

An arsenate with the α‐CrPO4 structure type,NaCa1–xNi3–2xAl2x(AsO4)3 (x = 0.23): crystal structure,charge‐distribution and bond‐valence‐sum analyses

Since the discovery of electrochemically active LiFePO₄, materials with tunnel and layered structures built up of transition metals and polyanions have become the subject of much research. A new quaternary arsenate, sodium calcium trinickel aluminium triarsenate, NaCa_1–x Ni_3–2x Al_2x (AsO₄)₃ (x = 0.23), was synthesized using the flux method in air at 1023 K and its crystal structure was determined from single‐crystal X‐ray diffraction (XRD) data. This material was also characterized by qualitative energy‐dispersive X‐ray spectroscopy (EDS) analysis and IR spectroscopy. The crystal structure belongs to the α‐CrPO₄ type with the space group Imma . The structure is described as a three‐dimensional framework built up of corner‐edge‐sharing NiO₆, (Ni,Al)O₆ and AsO₄ polyhedra, with channels running along the [100] and [010] directions, in which the sodium and calcium cations are located. The proposed structural model has been validated by bond‐valence‐sum (BVS) and charge‐distribution (CHARDI) tools. The sodium ionic conduction pathways in the anionic framework were investigated by means of the bond‐valence site energy (BVSE) model, which predicted that the studied material will probably be a very poor Na⁺ ion conductor (bond‐valence activation energy ∼7 eV).     

An Atomic View of Cation Diffusion Pathways from Single‐Crystal Topochemical Transformations

The diffusion pathways of Li‐ions as they traverse cathode structures in the course of insertion reactions underpin many questions fundamental to the functionality of Li‐ion batteries. Much current knowledge derives from computational models or the imaging of lithiation behavior at larger length scales; however, it remains difficult to experimentally image Li‐ion diffusion at the atomistic level. Here, by using topochemical Li‐ion insertion and extraction to induce single‐crystal‐to‐single‐crystal transformations in a tunnel‐structured V₂O₅ polymorph, coupled with operando powder X‐ray diffraction, we leverage single‐crystal X‐ray diffraction to identify the sequence of lattice interstitial sites preferred by Li‐ions to high depths of discharge, and use electron density maps to create a snapshot of ion diffusion in a metastable phase. Our methods enable the atomistic imaging of Li‐ions in this cathode material in kinetic states and provide an experimentally validated angstrom‐level 3D picture of atomic pathways thus far only conjectured through DFT calculations.     

Progress on multiphase layered transition metal oxide cathodes of sodium ion batteries

As one of the most promising secondary batteries in large-scale energy storage, sodium ion batteries (SIBs) have attracted wide attention due to the abundant raw materials and low cost. Layered transition metal oxides are one kind of popular cathode material candidates because of its easy synthesis and large theoretical specific capacity. Yet, the most common P2 and O3 phases show distinct structural characteristics respectively. O3 phase can serve as a sodium reservoir, but it usually suffers from serious phase transition and sluggish kinetics. For the P2 phase, it allows the fast sodium ion migration in the bulk and the structure can maintain stable, but it is lack of sodium, showing a great negative effect on Coulombic efficiency in full cell. Thus, single phase structure almost cannot achieve satisfied comprehensive sodium storage performances. Under these circumstances, exploiting novel multiphase cathodes showing synergetic effect may give solution to these problems. In this review, we summarize the recent development of multiphase layered transition metal oxide cathodes of SIBs, analyze the mechanism and prospect the future potential research directions.     

A Cation and Anion Dual Doping Strategy for the Elevation of Titanium Redox Potential for High‐Power Sodium‐Ion Batteries

Titanium‐based polyanions have been intensively investigated for sodium‐ion batteries owing to their superior structural stability and thermal safety. However, their low working potential hindered further applications. Now, a cation and anion dual doping strategy is used to boost the redox potential of Ti‐based cathodes of Na₃Ti_0.5V_0.5(PO₃)₃N as a new cathode material for sodium ion batteries. Both the Ti³⁺/Ti⁴⁺ and V³⁺/V⁴⁺ redox couples are reversibly accessed, leading to two distinctive voltage platforms at ca. 3.3 V and ca. 3.8 V, respectively. The remarkably improved cycling stability (86.3 %, 3000 cycles) can be ascribed to the near‐zero volume strain in this unusual cubic symmetry, which has been demonstrated by in situ synchrotron‐based X‐ray diffraction. First‐principles calculations reveal its well‐interconnected 3D Na diffusion pathways with low energy barriers, and the two‐sodium‐extracted intermediate NaTi_0.5V_0.5(PO₃)₃N is also a stable phase according to formation energy calculations.     

Graphite‐Nanoplate‐Coated Bi2S3 Composite with High‐Volume Energy Density and Excellent Cycle Life for Room‐Temperature Sodium–Sulfide Batteries

Graphite‐nanoplate‐coated Bi₂S₃ composite (Bi₂S₃@C) has been prepared by a simple, scalable, and energy‐efficient precipitation method combined with ball milling. The Bi₂S₃@C composite was used as the cathode material for sodium–sulfide batteries. It delivered an initial capacity of 550 mAh g^?1 and high stable specific energy in the range of 275–300 Wh kg^?1 at 0.1 C, with an enhanced capacity retention of 69 % over 100 cycles. The unique structure demonstrates superior cycling stability, with a capacity drop of 0.3 % per cycle over 100 cycles, compared with that of bare Bi₂S₃. The sodium storage mechanism of Bi₂S₃ was investigated based on ex situ X‐ray diffraction and scanning transmission electron microscopy.     

Lithium‐Rich Layered Oxide Li1.18Ni0.15Co0.15Mn0.52O2 as the Cathode Material for Hybrid Sodium‐Ion Batteries

Li‐rich layered oxide Li_1.18Ni_0.15Co_0.15Mn_0.52O₂ (LNCM) is, for the first time, examined as the positive electrode for hybrid sodium‐ion battery and its Na⁺ storage properties are comprehensively studied in terms of galvanostatic charge–discharge curves, cyclic voltammetry and rate capability. LNCM in the proposed sodium‐ion battery demonstrates good rate capability whose discharge capacity reaches about 90 mA h g^?1 at 10 C rate and excellent cycle stability with specific capacity of about 105 mA h g^?1 for 200 cycles at 5 C rate. Moreover, ex situ ICP‐OES suggests interesting mixed‐ions migration processes: In the initial two cycles, only Li⁺ can intercalate into the LNCM cathode, whereas both Li⁺ and Na⁺ work together as the electrochemical cycles increase. Also the structural evolution of LNCM is examined in terms of ex situ XRD pattern at the end of various charge–discharge scans. The strong insight obtained from this study could be beneficial to the design of new layered cathode materials for future rechargeable sodium‐ion batteries.     

A Yolk–Shell‐Structured FePO4 Cathode for High‐Rate and Long‐Cycling Sodium‐Ion Batteries

Amorphous iron phosphate (FePO₄) has attracted enormous attention as a promising cathode material for sodium‐ion batteries (SIBs) because of its high theoretical specific capacity and superior electrochemical reversibility. Nevertheless, the low rate performance and rapid capacity decline seriously hamper its implementation in SIBs. Herein, we demonstrate a sagacious multi‐step templating approach to skillfully craft amorphous FePO₄ yolk–shell nanospheres with mesoporous nanoyolks supported inside the robust porous outer nanoshells. Their unique architecture and large surface area enable these amorphous FePO₄ yolk–shell nanospheres to manifest remarkable sodium storage properties with high reversible capacity, outstanding rate performance, and ultralong cycle life.     

VOCl as a Cathode for Rechargeable Chloride Ion Batteries

A novel room temperature rechargeable battery with VOCl cathode, lithium anode, and chloride ion transporting liquid electrolyte is described. The cell is based on the reversible transfer of chloride ions between the two electrodes. The VOCl cathode delivered an initial discharge capacity of 189 mAh g^?1. A reversible capacity of 113 mAh g^?1 was retained even after 100 cycles when cycled at a high current density of 522 mA g^?1. Such high cycling stability was achieved in chloride ion batteries for the first time, demonstrating the practicality of the system beyond a proof of concept model. The electrochemical reaction mechanism of the VOCl electrode in the chloride ion cell was investigated in detail by ex situ X‐ray diffraction (XRD), infrared spectroscopy (FTIR), transmission electron microscopy (TEM), and X‐ray photoelectron spectroscopy (XPS). The results confirm reversible deintercalation–intercalation of chloride ions in the VOCl electrode.     

A Sodium Manganese Oxide Cathode by Facile Reduction for Sodium Batteries

A nonstoichiometric sodium manganese oxide (Na_xMnO_2+δ) cathode useful for sodium batteries was synthesized by an ambient‐temperature strategy that involved facile reduction of aqueous sodium permanganate in sodium iodide and subsequent heat treatment at 600 °C. Combined powder X‐ray diffraction and synchrotron X‐ray diffraction analyses confirmed the annealed sample to belong to a Na_xMnO₂ phase with a P2‐hexagonal structure. The ICP‐AES results confirmed the stoichiometry of the sample to be Na_0.53MnO_2+δ. Electron microscopy studies revealed the particle size of the electrode to be in the range of a few hundred nanometers. The Na_0.53MnO_2+δ cathode delivered an average discharge capacity of 170 mA h g^?1 with a stable plateau at 2.1 V for the initial 25 cycles versus sodium. Ex situ XANES studies confirmed the reversible intercalation of sodium into Na_0.53MnO_2+δ and suggested the accommodation of over‐stoichiometric Mn⁴⁺ ions to contribute towards the performance of the electrode.