Facile Preparation of Mn3O4 Hausmanite Nanoplates from a New Octahedral Manganese (III) Schiff Base Complex

A novel bidentate Schiff base ligand L (L = N-(4-amino-2-chloro-phenyl)-2-hydroxybenzaldehyde) and the subsequent octahedral manganese(III) Schiff base complex MnL ₃ have been synthesized and characterized by, FT-IR spectroscopy and elemental analyses (CHN). Additionally, Schiff base ligand has been characterized by ¹H NMR spectroscopy. Thermogravimetric analysis of the ligand and its metal complexes reveals their thermal stability and decomposition pattern. Thus, the MnL ₃ complex has been investigated as a novel precursor for the facile preparation of Mn₃O₄ nanoparticles via solid-state thermal decomposition under aerobic conditions, at a temperature of ca. 450 °C The resulting Mn₃O₄ nanocrystals were characterized by FT-IR spectroscopy, X-ray powder diffraction (XRPD), transmission electron microscopy (TEM) and scanning electron microscopy (SEM). The XRPD studies reveal the characteristic diffraction peaks indexed to the Mn₃O₄ hausmanite structure, while the absence of additional peaks tends to clearly indicate the high purity of the sample. In addition, the TEM/SEM investigations displayed the nanoplate shape of the rather monodisperse crystalline Mn₃O₄ nanoparticles, with an average diameter of ca. 10 nm. The statistical distribution of the nanoparticles size has to be provided with an histogram graphic.     

磁性普鲁士蓝纳米颗粒的合成及其化学修饰电极的制作

利用FeSO₄与FeCl₃合成了超细磁性Fe₃O₄纳米颗粒, 并进一步利用该纳米颗粒与铁氰酸钾在酸性溶液(pH～2)中的化学反应成功制备了一种新型的磁性普鲁士蓝纳米颗粒; 研究了该磁性颗粒的磁学性能, 通过磁力将其修饰于固体石蜡碳糊电极表面制成了化学修饰电极, 考察了该电极对过氧化氢的电催化还原及对水合肼的电催化氧化特性. 该化学修饰电极可对过氧化氢和水合肼进行测定, 线性范围分别为过氧化氢2×10^－6～5×10^－3 mol/L, 水合肼7.2×10^－7～3.6×10^－4 mol/L. 利用磁性普鲁士蓝纳米颗粒制得的修饰电极具有催化性能高、稳定性好、表面易更新等优点.     

On some regularities of grafting of vinylpyridine derivatives onto acetyle cellulose

The radical graft copolymerization of vinylpyridine derivatives onto acetyl cellulose was investigated using Fe²⁺/H₂O₂ redox system as an initiator. It was proved that the addition of hydrazine hydrate increased the degree of grafting many times. The reaction mechanism of hydrazine hydrate was also investigated. A. correlation between nitrogen content and the total anion exchange capacity was established. The vinylpyridine derivatives were ordered according to their reactivity. The effects of reaction conditions on the total anion-exchange capacity, the total conversion, the degree of grafting, and the grafting efficiency of the copolymers obtained were examined. The copolymers were characterized by IR and H-NMR spectra, thermogravimetric analysis, elemental analysis, and total anion-exchange capacity.     

Room-Temperature Synthesis of Copper and Silver, Nanocrystalline Chalcogenides in Mixed Solvents

Copper and silver nanocrystalline chalcogenides, Cu_2−xSe, Cu₂Te, Ag₂Se, and Ag₂Te, have been successfully synthesized in a mixture of ethylenediamine and hydrazine hydrate as a solvent at room temperature. Products showed different morphologies, such as nanotubes, nanorods, and nanoparticles. The results indicated that the coordination and chelation abilities of ethylenediamine play an important role in the formation of one-dimensional nanocrystalline binary chalcogenides, and hydrazine hydrate is crucial to the electron transfer in the room temperature reactions. These transition-metal nanocrystalline chalcogenides as prepared were analyzed by X-ray powder diffraction, transmission electron microscopy, and X-ray photoelectron spectroscopy. The UV-Vis absorption properties of these nanocrystals were also measured.     

Synthesis of spiro[pyrazoloquinoline-oxindoles] and spiro[chromenopyrazolo-oxindoles] promoted by guanidine-functionalized magnetic Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanoparticles

Magnetic nanoparticles (MNPs) Fe₃O₄-immobilized guanidine (Fe₃O₄ MNPs-guanidine) have been used as an efficient catalyst for the preparation of spiro[pyrazoloquinoline-oxindoles] and spiro[chromenopyrazolo-oxindoles] by four-component reactions of phenylhydrazine or hydrazine hydrate, isatins, ketoesters and naphthylamine or 2-naphthol under reflux condition in ethanol. This method provides several advantages including mild reaction conditions, the applicability to a wide range of substrates, the reusability of the catalyst and low catalyst loading.     

Hydrophilic and hydrophobic nano-sized Mn3O4 particles

Mn₃O₄ Hausmanite nanoparticles were prepared in aqueous solution by using metallic salt and hydrazine as precursor and reducing agent, respectively. The crystallite sizes ranged from 10 to 20 nm and the particle diameter distribution was very narrow and estimated between 20 and 30 nm. Influence of some parameters such as temperature, time of reaction, surfactant nature was studied for a synthesis in an aqueous medium. The as-made manganese oxides particles could be dispersed in an organic solvent containing stabilizing agents, according to perform the synthesis in an H₂O/n-hexan two-phase medium. These nanoparticles were characterized by X-ray diffraction, infrared spectroscopy, scanning and transmission electron microscopies and nitrogen absorption measurements.     

SPIONs as a nanomagnetic catalyst for the synthesis and anti-microbial activity of 2-aminothiazoles derivatives

A series of aminothiazole derivatives have been synthesized by using ultrasmall superparamagnetic iron oxide nanoparticles (SPIONs) nanomagnetic catalysis, which were prepared by reducing the Fe(II) and Fe(III) precursors using aqueous ammonia then characterized by the XRD, FTIR, SEM, and TEM. The 2-aminothiazole derivatives were obtained by coupling 2-aminothiazole diazonium salt with active methylene compounds then cyclization with hydrazine hydrate to afford pyrazolyl derivatives. The one-pot reaction of 2-aminothiazole with an aromatic aldehydes in the presence of Fe₃O₄ NPs to give Schiff bases derivatives. An efficient protocol is developed proudest yields and reduction reaction time and easy separation. Therefore, all synthesized compounds were evaluated for anti-microbial activity.     

Über Oxidhydroxide des vierwertigen Mangans mit Schichtengitter. 3. Mitteilung. Reduktion von Mangan(III)-manganat(IV) mit Zimtalkohol

Manganese(III) manganate(IV), one of the synthetic varieties of the birnessite group, is readily reduced in xylene suspension by cinnamyl alcohol. At moderate temperatures, including room temperature, γ-MnOOH (manganite) forms topotactically in extremely thin needles and is therefore easily overlooked in the X-ray examination. At higher temperatures further reduction occurs (Mn^III → Mn^II), and Mn₃O₄ (hausmannite) appears in comparatively large, equant cristallites which are less distinctly oriented. For comparison Na₄Mn₁₄O₂₇, 9H₂O, which has also been investigated, is much more stable than Mn₇O₁₃, 5H₂O. The same holds for finely divided synthetic varieties of the birnessite group precipitated from KMnO₄ solutions; by their behaviour they are related to Na₄Mn₁₄O₂₇, 9H₂O rather than to Mn₇O₁₃, 5 H₂O which is consistent with their substantial alkaline ion content. These results raise the question: is the so-called ‘todorokite’ a pure crystal species. According to present data ‘todorokite’ could be regarded as a transition product, i.e. as half decomposed buserite admixed with birnessite and substantial amounts of manganite.     

Preparation of Mn3O4 nanocrystallites by low-temperature solvothermal treatment of γ-MnOOH nanowires

The preparation of trimanganese tetroxide (Mn₃O₄) nanocrystallites from γ-MnOOH nanowires under mild conditions has been achieved by two steps: first, γ-MnOOH nanowires with a mean diameter of about 12 nm and lengths of up to several micrometers were directly prepared via hydrothermal reaction between KMnO₄ and toluene in water at 180°C for 24 h; then, pure Mn₃O₄ nanocrystallites could be obtained by solvothermal treatment of the γ-MnOOH nanowires in ethylenediamine (EDA) and ethylene glycol (EG) at 150°C for 24 h. It was found that the Mn₃O₄ product obtained in EDA comprised well-defined nanocrystallites with the size in the range of 15-35 nm, while the one obtained in EG consisted of aggregated nanoparticles with the size of less than 18 nm.The possible formation mechanism of nanocrystalline Mn₃O₄ in EDA and EG and reasons for the different effects of various solvents on the products were also proposed.     

Glycine-assisted combustion synthesis and electrochemical behavior of LiNi<Subscript>0.5</Subscript>Mn<Subscript>0.5</Subscript>O<Subscript>2</Subscript> nanoparticles under microwave irradiation

Layered LiNi_0.5Mn_0.5O₂ nanoparticles have been successfully prepared by the glycine-assisted combustion method under microwave irradiation. The exothermic reaction can generate a large quantity of heat rapidly leading to the formation and crystallization of LiNi_0.5Mn_0.5O₂. From the X-ray diffraction and scanning electronic microscopy results, the resulting powders have a well-developed layered structure and average particle-size is about 80 nm. The chemical composition analysis and electrochemical characteristics of the obtained LiNi_0.5Mn_0.5O₂ nanoparticles as cathode material for rechargeable lithium-ion battery were also investigated. The improved electrochemical performances of the layered LiNi_0.5Mn_0.5O₂ nanoparticles might be ascribed to the nanostructure of the powders and the unique combustion synthesis under microwave irradiation.     

铜催化异噁唑还原环清洁高效合成1-氨基-2-乙酰基蒽醌简

以水为反应介质,水合肼为还原剂,研究了痕量铜催化3-甲基蒽醌-[1,2-c]-异噁唑还原开环反应以清洁高效合成1-氨基-2-乙酰基蒽醌,考察了不同种类过渡金属硝酸盐的催化性能,发现Cu（NO₃）₂性能最好. 加入 2.6% 的催化剂和1.3倍的水合肼,在室温反应 2 h,底物转化率和目标产物选择性分别可达到 97.2%和 95%,TON达到38. 产品结构经氢核磁谱和质谱得以确证,主要副产为羟基取代的1-氨基-2-乙酰基蒽醌. 此外,提出了铜催化 3-甲基蒽醌-[1,2-c]-异噁唑还原开环反应合成 1-氨基-2-乙酰基蒽醌的可能反应机理.     

Synthesis of Mn3O4 nanoparticles by thermal decomposition of a [bis(salicylidiminato)manganese(II)] complex

The present investigation reports on the novel synthesis of Mn₃O₄ nanoparticles using thermal decomposition and their physicochemical characterization. The Mn₃O₄ nanoparticle powder has been prepared using [bis(salicylidiminato)manganese(II)] as a precursor. The effect of oleyl amine and triphenylphosphine on the particle morphology has been investigated. Transmission electron microscopy (TEM) analysis demonstrated Mn₃O₄ nanoparticles with an average diameter of about 25 nm. The structural study by X-ray diffraction (XRD) indicates that these nanoparticles have a pure tetragonal phase. The phase pure samples were characterized using X-ray photoelectron spectroscopy (XPS) for both Mn 2p and Mn 3s levels. The values of binding energies are consistent with related values reported in the literature.     

Synthesis of pyranopyrazoles using magnetic Fe3O4 nanoparticles as efficient and reusable catalyst

Magnetic Fe₃O₄ nanoparticles as a heterogeneous catalyst, were found to be efficient for the synthesis of a series of pyranopyrazoles by a four component reaction of a mixture of hydrazine hydrate, ethyl acetoacetate, aldehydes/ketones and malononitrile in water at room temperature. The products were attributed to the nanosize of about 16 nm in which the catalyst could act as a nanoreactor. The present protocol offers the advantages of clean reaction, short reaction time, high yield, easy purification and economic availability of the catalyst.     

Microwave hydrothermal synthesis,characterisation, and catalytic performance of Zn1−x Mn x O in cellulose conversion

Wurtzite-type Zn_1?x Mn _x O (x = 0, 0.03, 0.05, 0.07) nanostructures were successfully synthesised using a simple microwave-assisted hydrothermal route and their catalytic properties were investigated in the cellulose conversion. The morphology of the nanocatalysts is dopant-dependent. Pure ZnO presented multi-plate morphology with a flower-like shape of nanometric sizes, while the Zn_0.97Mn_0.03O sample is formed by nanoplates with the presence of spherical nanoparticles; the Zn_0.95Mn_0.05O and Zn_0.93Mn_0.07O samples are mainly formed by nanorods with the presence of a small quantity of spherical nanoparticles. The catalyst without Mn did not show any catalytic activity in the cellulose conversion. The Mn doping promoted an increase in the density of weak acid sites which, according to the catalytic results, favoured promotion of the reaction.     

A novel and efficient synthesis of pyrazolo[3,4-d]pyrimidine derivatives and the study of their anti-bacterial activity

In this work 4-amino-6-aryl-2-phenyl pyrimidine-5-carbonitrile derivatives were synthesized through a one-pot,three-component reaction of an aldehyde,malononitrile and benzamidine hydrochloride,in the presence of magnetic nano Fe₃O₄ particles as a catalyst under solvent-free conditions.3-Amino-6-aryl- 2-phenylpyrazolo[3,4-d]pyrimidine derivatives were prepared through an efficient and environmentally friendly reaction between 4-amino-6-aryl-2-phenylpyrimidine-5-carbonitrile derivatives and hydrazine hydrate and their antibacterial activity has been evaluated.     

Effect of Hydrothermal Time,pH, and Alkali on Crystal Phase and Morphology of Manganese Oxides

γ‐MnOOH nanowires and Mn₃O₄ nanoparticles were prepared in the hydrothermal process. The effect of hydrothermal time, pH, and alkali on morphology and composition of manganese oxides was investigated. The results of XRD, TEM, and SEM showed that the γ‐MnOOH prepared in shorter hydrothermal time was a mixture of nanocubes and nanowires, while in longer hydrothermal time was pure nanowires. Interestingly, increasing the pH of the reaction system from 8 to 10, the mixture of γ‐MnOOH nanowires and Mn₃O₄ nanoparticles was obtained. Alkali types also were discussed in directing the reaction and crystallization of manganese oxides. The product was pure γ‐MnOOH when using NaOH in the system, but a mixture of Mn₃O₄ and γ‐MnOOH was obtained when using NH₃ · H₂O.     

Gold nanoparticles as dehydrogenase mimicking nanozymes for estradiol degradation

Nanozyme catalysis has been mainly focused on a few chromogenic and fluorogenic substrates, while environmentally and biologically important compounds need to be tested to advance the field. In this work, we studied oxidation of estradiol (E2) in the presence of various nanomaterials including gold nanoparticles (AuNPs), nanoceria (CeO₂), Fe₃O₄, Fe₂O₃, MnO₂ and Mn₂O₃, and found that AuNPs had a dehydrogenase-mimicking activity to convert E2 to estrone (E1). This conversion was monitored using HPLC. The reaction was faster at higher pH and reached saturation at pH 8. Smaller AuNPs had a higher catalytic efficiency and 5 nm AuNPs were 4.8-fold faster than 13 nm at the same total surface area. Finally, we tried 17α-ethinylestradiol (EE2) as a substrate and found that 5 nm AuNPs can catalyze EE2 oxidation in the presence of H₂O₂. This work indicated that some nanomaterials can affect environmentally important hormones via oxidation reactions, and this study has expanded the scope of substrate of nanozymes.     

Mild preparation of 1H-pyrazolo[1,2-b]phthalazine-5,10-dione derivatives with magnetic Fe3O4 nanoparticles coated by (3-aminopropyl)-triethoxysilane as catalyst under ambient and solvent-free conditions

An efficient, one-pot quantitative procedure for preparation of 1H-pyrazolo[1,2-b]phthalazine-5,10-dione derivatives from four-component condensation reaction of hydrazine monohydrate, phthalic anhydride, malononitrile or ethyl cyanoacetate, and aromatic aldehydes in the presence of magnetic Fe₃O₄ nanoparticles coated by (3-aminopropyl)-triethoxysilane as catalyst under mild, ambient, and solvent-free conditions is described. Simple procedure, high yield, short reaction time, and environmentally benign method are advantages of this protocol. The magnetic Fe₃O₄ nanoparticles coated by (3-aminopropyl)-triethoxysilane can be recovered and reused several times without loss of activity.     

Facile,Product‐Selective Reduction of Azoxyarenes into Azoarenes or Hydrazoarenes by Aluminium/Hydrazine Hydrate

Azoxyarenes, on treatment with hydrazine hydrate in presence of aluminium powder in methanol, undergo reduction. The reactions have been carried under microwave irradiation as well at reflux to get the corresponding hydrazoarenes and azoarenes as reduced products. The reaction is very fast, which gives excellent yield of the product. Substituents such as OCH₃, OC₂H₅, and Cl are unaffected.     

Homogeneity range of neodymium manganite in air

The solubility boundaries for Nd₂O₃ and manganese oxides in NdMnO_{3 ± δ} have been determined by X-ray powder diffraction analysis of homogeneous phases and heterogeneous compositions of the general formula Nd_{2 ? x} Mn _x O_{3 ± δ} (0.90 ≤ x ≤ 1.20; Δx = 0.02) prepared by ceramic technology from constituent oxides in air in the temperature range 900–1400°C. The results are presented in the form of a fragment of the Nd-Mn-O phase diagram in air. It is suggested that the Nd₂O₃ solubility in NdMnO_{3 ± δ} is due to crystal defects and the solubility of manganese oxides is in addition due to the disproportionation reaction 2Mn³⁺ = Mn²⁺ + Mn⁴⁺ and the subsequent partial substitution of divalent for tervalent manganese ions in the cuboctahedral positions of the perovskite-like crystal lattice. To verify this suggestion, it is necessary to systematically study the oxygen nonstoichiometry δ in Nd_{2 ? x} Mn _x O_{3 ± δ} as a function of x and synthesis temperature and structurally study this oxide with these parameters being varied.