Atomically Dispersed Nickel(I) on an Alloy-Encapsulated Nitrogen-Doped Carbon Nanotube Array for High-Performance Electrochemical CO2 Reduction Reaction

Single-atom catalysts (SACs) show great promise for electrochemical CO₂ reduction reaction (CRR), but the low density of active sites and the poor electrical conduction and mass transport of the single-atom electrode greatly limit their performance. Herein, we prepared a nickel single-atom electrode consisting of isolated, high-density and low-valent nickel(I) sites anchored on a self-standing N-doped carbon nanotube array with nickel–copper alloy encapsulation on a carbon-fiber paper. The combination of single-atom nickel(I) sites and self-standing array structure gives rise to an excellent electrocatalytic CO₂ reduction performance. The introduction of copper tunes the d-band electron configuration and enhances the adsorption of hydrogen, which impedes the hydrogen evolution reaction. The single-nickel-atom electrode exhibits a specific current density of −32.87 mA cm⁻² and turnover frequency of 1962 h⁻¹ at a mild overpotential of 620 mV for CO formation with 97 % Faradic efficiency.     

Eutectic Molten Salt Synthesis of Highly Microporous Macrocyclic Porous Organic Polymers for CO2 Capture

The development of porous materials is of great interest for the capture of CO₂ from various emission sources, which is essential to mitigate its detrimental environmental impact. In this direction, porous organic polymers (POPs) have emerged as prime candidates owing to their structural tunability, physiochemical stability and high surface areas. In an effort to transfer an intrinsic property of a cyclotetrabenzoin-derived macrocycle – its high CO₂ affinity – into porous networks, herein we report the synthesis of three-dimensional (3D) macrocycle-based POPs through the polycondensation of an octaketone macrocycle with phenazine-2,3,7,8-tetraamine hydrochloride. This polycondensation was performed under ionothermal conditions, using a eutectic salt mixture in the temperature range of 200 to 300 °C. The resulting polymers, named 3D-mmPOPs, showed reaction temperature-dependent surface areas and gas uptake properties. 3D-mmPOP-250 synthesized at 250 °C exhibited a surface area of 752 m² g⁻¹ and high microporosity originating from the macrocyclic units, thus resulting in an excellent CO₂ binding enthalpy of 40.6 kJ mol⁻¹ and CO₂ uptake capacity of 3.51 mmol g⁻¹ at 273 K, 1.1 bar.     

Synthesis of Sulfonated Porous Organic Polymers with a Hydrophobic Core for Efficient Acidic Catalysis in Organic Transformations

Synthesis of sulfonated porous polymers with improved hydrophobicity and stability is of extreme importance in both academic research and industrial applications. However, there is often a trade-off between acidity and surface hydrophobicity of sulfonated polymers. In this study, we report a strategy for the synthesis of sulfonated porous organic polymers (S-PT) with improved hydrophobicity via free radical polymerization method by using a rigid and large multidentate monomer, 1,3,5-tri(4-vinylphenyl)-benzene, having a hydrophobic core. The results of vapor adsorption measurement show that S-PT has more hydrophobic properties than sulfonated poly(divinylbenzene) (S-PD), attributed to the hydrophobic core of its multidentate monomer. Furthermore, the optimization of sulfonation time established a balance between surface acidity and hydrophobicity. Under optimized conditions, S-PT afforded up to 113 mmol g⁻¹ h⁻¹ TOF in the esterification of oleic acid with methanol, more active than commercial Amberlyst-15 with TOF of 15 mmol g⁻¹ h⁻¹ and Nafion NR50 with TOF of 7 mmol g⁻¹ h⁻¹. We believe that the findings of this study will provide useful insights to advance the design and synthesis of solid acid catalysts for organic transformations.     

Synthesis and Gas Adsorption Properties of Tetra‐Armed Microporous Organic Polymer Networks Based on Triphenylamine

Two novel tetra‐armed microporous organic polymers have been designed and synthesized via a nickel‐catalyzed Yamamoto‐type Ullmann cross‐coupling reaction or Suzuki cross‐coupling polycondensation. These polymers are stable in various solvents, including concentrated hydrochloric acid, and are thermally stable. The homocoupled polymer YPTPA shows much higher Brunauer–Emmet–Teller‐specific surface area up to 1557 m² g⁻¹ than the copolymer SPTPA (544 m² g⁻¹), and a high CO₂ uptake ability of 3.03 mmol g⁻¹ (1.13 bar/273 K) with a CO₂/N₂ sorption selectivity of 17.3:1. Both polymers show high isosteric heats of CO₂ adsorption (22.7–26.5 kJ mol⁻¹) because the incorporation of nitrogen atoms into the skeleton of microporous organic polymers enhances the interaction between the pore wall and the CO₂ molecules. The values are higher than those of the porous aromatic frameworks, which contain neither additional polar functional groups nor nitrogen atoms, and are rather close to those of previously reported microporous organic polymers containing the nitrogen atoms on the pore wall. These data show that these materials would be potential candidates for applications in post‐combustion CO₂ capture and sequestration technology.

     

Design of a Single-Atom Indiumδ+–N4 Interface for Efficient Electroreduction of CO2 to Formate

Main-group element indium (In) is a promising electrocatalyst which triggers CO₂ reduction to formate, while the high overpotential and low Faradaic efficiency (FE) hinder its practical application. Herein, we rationally design a new In single-atom catalyst containing exclusive isolated In^δ+–N₄ atomic interface sites for CO₂ electroreduction to formate with high efficiency. This catalyst exhibits an extremely large turnover frequency (TOF) up to 12500 h⁻¹ at −0.95 V versus the reversible hydrogen electrode (RHE), with a FE for formate of 96 % and current density of 8.87 mA cm⁻² at low potential of −0.65 V versus RHE. Our findings present a feasible strategy for the accurate regulation of main-group indium catalysts for CO₂ reduction at atomic scale.     

Glycine-Functionalized CsPbBr3 Nanocrystals for Efficient Visible-Light Photocatalysis of CO2 Reduction

Capping ligands are indispensable for the preparation of metal-halide-perovskite (MHP) nanocrystals (NCs) with good stability; however, the long alkyl-chain capping ligands in conventional MHP NCs will be unfavorable for CO₂ adsorption and hinder the efficient carrier separation on the surface of MHP NCs, leading to inferior catalytic activity in artificial photosynthesis. Herein, CsPbBr₃ nanocrystals with short-chain glycine as ligand are constructed through a facile ligand-exchange strategy. Owing to the reduced hindrance of glycine and the presence of the amine group in glycine, the photogenerated carrier separation and CO₂ uptake capacity are noticeably improved without compromising the stability of the MHP NCs. The CsPbBr₃ nanocrystals with glycine ligands exhibit a significantly increased yield of 27.7 μmol g⁻¹ h⁻¹ for photocatalytic CO₂-to-CO conversion without any organic sacrificial reagents, which is over five times higher than that of control CsPbBr₃ NCs with conventional long alkyl-chain capping ligands.     

Highly Active Hydrogen-rich Photothermal Reverse Water Gas Shift Reaction on Ni/LaInO3 Perovskite Catalysts with Near-unity Selectivity

Photo-assisted reverse water gas shift (RWGS) reaction is regarded green and promising in controlling the reaction gas ratio in Fischer Tropsch synthesis. But it is inclined to produce more byproducts in high H₂ concentration condition. Herein, LaInO₃ loaded with Ni-nanoparticles (Ni NPs) was designed to obtain an efficient photothermal RWGS reaction rate, where LaInO₃ was enriched with oxygen vacancies to roundly adsorbing CO₂ and the strong interaction with Ni NPs endowed the catalysts with powerful H₂ activity. The optimized catalyst performed a large CO yield rate (1314 mmol g_Ni⁻¹ h⁻¹) and ≈100 % selectivity. In situ characterizations demonstrated a COOH* pathway of the reaction and photoinduced charge transfer process for reducing the RWGS reaction active energy. Our work provides valuable insights on the construction of catalysts concerning products selectivity and photoelectronic activating mechanism on CO₂ hydrogenation.     

Proton Shuttling by Polyaniline of High Brønsted Basicity for Improved Electrocatalytic Ethylene Production from CO2

Hybrid organic/inorganic composites with the organic phase tailored to modulate local chemical environment at the Cu surface arise as an enchanting category of catalysts for electrocatalytic CO₂ reduction reaction (CO₂RR). A fundamental understanding on how the organics of different functionality, polarity, and hydrophobicity affect the reaction path is, however, still lacking to guide rational catalyst design. Herein, polypyrrole (PPy) and polyaniline (PANI) manifesting different Brønsted basicity are compared for their regulatory roles on the CO₂RR pathways regarding *CO coverage, proton source and interfacial polarity. Concerted efforts from in situ IR, Raman and operando modelling unveil that at the PPy/Cu interface with limited *CO coverage, hydridic *H produced by the Volmer step favors the carbon hydrogenation of *CO to form *CHO through a Tafel process; Whereas at the PANI/Cu interface with concentrated CO₂ and high *CO coverage, protonic H⁺ shuttled through the benzenoid -NH- protonates the oxygen of *CO, yielding *COH for asymmetric coupling with nearby *CO to form *OCCOH under favored energetics. As a result of the tailored chemical environment, the restructured PANI/Cu composite demonstrates a high partial current density of 0.41 A cm⁻² at a maximal Faraday efficiency of 67.5 % for ethylene production, ranking among states of the art.     

Significant Acceleration of Photocatalytic CO2 Reduction at the Gas-Liquid Interface of Microdroplets**

Solar-driven CO₂ reduction reaction (CO₂RR) is largely constrained by the sluggish mass transfer and fast combination of photogenerated charge carriers. Herein, we find that the photocatalytic CO₂RR efficiency at the abundant gas-liquid interface provided by microdroplets is two orders of magnitude higher than that of the corresponding bulk phase reaction. Even in the absence of sacrificial agents, the production rates of HCOOH over WO₃ ⋅ 0.33H₂O mediated by microdroplets reaches 2536 μmol h⁻¹ g⁻¹ (vs. 13 μmol h⁻¹ g⁻¹ in bulk phase), which is significantly superior to the previously reported photocatalytic CO₂RR in bulk phase reaction condition. Beyond the efficient delivery of CO₂ to photocatalyst surfaces within microdroplets, we reveal that the strong electric field at the gas-liquid interface of microdroplets essentially promotes the separation of photogenerated electron-hole pairs. This study provides a deep understanding of ultrafast reaction kinetics promoted by the gas-liquid interface of microdroplets and a novel way of addressing the low efficiency of photocatalytic CO₂ reduction to fuel.     

Experimental Evidence of CO2 Photoreduction Activity of SnO2 Nanoparticles

Tin dioxide (SnO₂) has intrinsic characteristics that do not favor its photocatalytic activity. However, we evidenced that surface modification can positively influence its performance for CO₂ photoreduction in the gas phase. The hydroxylation of the SnO₂ surface played a role in the CO₂ affinity decreasing its reduction potential. The results showed that a certain selectivity for methane (CH₄), carbon monoxide (CO), and ethylene (C₂H₄) is related to different SnO₂ hydrothermal annealing. The best performance was seen for SnO₂ annealed at 150 °C, with a production of 20.4 μmol g⁻¹ for CH₄ and 16.45 μmol g⁻¹ for CO, while for SnO₂ at 200 °C the system produced more C₂H₄, probably due to a decrease of surface −OH groups.     

Molecular Modification of Single Cobalt Sites Boosts the Catalytic Activity of CO2 Electroreduction into CO

Electroreduction of CO₂ into carbonaceous fuels or industrial chemicals using renewable energy sources is an ideal way to promote global carbon recycling. Thus, it is of great importance to develop highly selective, efficient, and stable catalysts. Herein, we prepared cobalt single atoms (Co SAs) coordinated with phthalocyanine (Co SAs-Pc). The anchoring of phthalocyanine with Co sites enabled electron transfer from Co sites to CO₂ effectively via the π-conjugated system, resulting in high catalytic performance of CO₂ electroreduction into CO. During the process of CO₂ electroreduction, the Faradaic efficiency (FE) of Co SAs-Pc for CO was as high as 94.8 %. Meanwhile, the partial current density of Co SAs-Pc for CO was −11.3 mA cm⁻² at −0.8 V versus the reversible hydrogen electrode (vs RHE), 18.83 and 2.86 times greater than those of Co SAs (−0.60 mA cm⁻²) and commercial Co phthalocyanine (−3.95 mA cm⁻²), respectively. In an H-cell system operating at −0.8 V vs RHE over 10 h, the current density and FE for CO of Co SAs-Pc dropped by 3.2 % and 2.5 %. A mechanistic study revealed that the promoted catalytic performance of Co SAs-Pc could be attributed to the accelerated reaction kinetics and facilitated CO₂ activation.     

Vibration-driven Reduction of CO2 to Acetate with 100 % Selectivity by SnS Nanobelt Piezocatalysts

Converting CO₂ into high-value C2 chemicals such as acetate with high selectivity and efficiency is a critical issue in renewable energy storage. Herein, for the first time we present a vibration-driven piezocatalysis with tin(II) monosulfide (SnS) nanobelts for conversion of CO₂ to acetate with 100 % selectivity, and the highest production rate (2.21 mM h⁻¹) compared with reported catalysts. Mechanism analysis reveal that the polarized charges triggered by periodic mechanical vibration promote the adsorption and activation of CO₂. The electron transfer can be facilitated due to built-in electric field, decreased band gap and work function of SnS under stress. Remarkably, reduced distance between active sites leads to charge enrichment on Sn sites, promoting the C−C coupling, reducing the energy barriers of the rate determining step. It puts forward a bran-new strategy for converting CO₂ into high-value C2 products with efficient, low-cost and environment-friendly piezocatalysis utilizing mechanical energy.     

Ultrasound-induced polymerization of methyl methacrylate in liquid carbon dioxide: a clean and safe route to produce polymers with controlled molecular weight

Ultrasound-induced cavitation is known to enhance chemical reactions as well as mass transfer at ambient pressures. Ultrasound is rarely studied at higher pressures, since a high static pressure hampers the growth of cavities. Recently, we have shown that pressurized carbon dioxide can be used as a medium for ultrasound-induced reactions, because the static pressure is counteracted by the higher vapor pressure, which enables cavitation. With the use of a dynamic bubble model, the possibility of cavitation and the resulting hot-spot formation upon bubble collapse have been predicted. These simulations show that the implosions of cavities in high-pressure fluids generate temperatures at which radicals can be formed. To validate this, radical formation and polymerization experiments have been performed in CO₂-expanded methyl methacrylate. The radical formation rate is approximately 1.5*10¹⁴ s⁻¹ in this system. Moreover, cavitation-induced polymerizations result in high-molecular weight polymers. This work emphasizes the application potential of sonochemistry for polymerization processes, as cavitation in CO₂-expanded monomers has shown to be a clean and safe route to produce polymers with a controlled molecular weight.     

Bio-inspired and Eco-friendly Synthesis of 3D Spongy Meso-Microporous Carbons from CO2 for Supercapacitors

Inspired by the spongy bone structures, three-dimensional (3D) sponge-like carbons with meso-microporous structures are synthesized through one-step electro-reduction of CO₂ in molten carbonate Li₂CO₃−Na₂CO₃−K₂CO₃ at 580 °C. SPC4-0.5 (spongy porous carbon obtained by electrolysis of CO₂ at 4 A for 0.5 h) is synthesized with the current efficiency of 96.9 %. SPC4-0.5 possesses large electrolyte ion accessible surface area, excellent wettability and electronical conductivity, ensuring the fast and effective mass and charge transfer, which make it an advcanced supercapacitor electrode material. SPC4-0.5 exhibits a specific capacitance as high as 373.7 F g⁻¹ at 0.5 A g⁻¹, excellent cycling stability (retaining 95.9 % of the initial capacitance after 10000 cycles at 10 A g⁻¹), as well as high energy density. The applications of SPC4-0.5 in quasi-solid-state symmetric supercapacitor and all-solid-state flexible devices for energy storage and wearable piezoelectric sensor are investigated. Both devices show considerable capacitive performances. This work not only presents a controllable and facile synthetic route for the porous carbons but also provides a promising way for effective carbon reduction and green energy production.     

Hydrogen-Bonded Organic Framework to Upgrade Cycling Stability and Rate Capability of Li-CO2 Batteries

Elaborately designed multifunctional electrocatalysts capable of promoting Li⁺ and CO₂ transport are essential for upgrading the cycling stability and rate capability of Li-CO₂ batteries. Hydrogen-bonded organic frameworks (HOFs) with open channels and easily functionalized surfaces hold great potential for applications in efficient cathodes of Li-CO₂ batteries. Herein, a robust HOF_S (HOF-FJU-1) is introduced for the first time as a co-catalyst in the cathode material of Li-CO₂ batteries. HOF-FJU-1 with cyano groups located periodically in the pore can induce homogeneous deposition of discharge products and accommodate volumetric expansion of discharge products during cycling. Besides, HOF-FJU-1 enables effective interaction between Ru⁰ nanoparticles and cyano groups, thus forming efficient and uniform catalytic sites for CRR/CER. Moreover, HOF-FJU-1 with regularly arranged open channels are beneficial for CO₂ and Li⁺ transport, enabling rapid redox kinetic conversion of CO₂. Therefore, the HOF-based Li-CO₂ batteries are capable of stable operation at 400 mA g⁻¹ for 1800 h and maintain a low overpotential of 1.96 V even at high current densities up to 5 A g⁻¹. This work provides valuable guidance for developing multifunctional HOF-based catalysts to upgrade the longevity and rate capability of Li-CO₂ batteries.     

Tweaking Photo CO2 Reduction by Altering Lewis Acidic Sites in Metalated-Porous Organic Polymer for Adjustable H2/CO Ratio in Syngas Production

Herein, we have specifically designed two metalated porous organic polymers ( Zn-POP and Co-POP ) for syngas (CO+H₂) production from gaseous CO₂. The variable H₂/CO ratio of syngas with the highest efficiency was produced in water medium (without an organic hole scavenger and photosensitizer) by utilizing the basic principle of Lewis acid/base chemistry. Also, we observed the formation of entirely different major products during photocatalytic CO₂ reduction and water splitting with the help of the two catalysts, where CO (145.65 μmol g⁻¹ h⁻¹) and H₂ (434.7 μmol g⁻¹ h⁻¹) production were preferentially obtained over Co-POP & Zn-POP , respectively. The higher electron density/better Lewis basic nature of Co-POP was investigated further using XPS, XANES, and NH₃-TPD studies, which considerably improve CO₂ activation capacity. Moreover, the structure–activity relationship was confirmed via in situ DRIFTS and DFT studies, which demonstrated the formation of COOH* intermediate along with the thermodynamic feasibility of CO₂ reduction over Co-POP while water splitting occurred preferentially over Zn-POP .     

Integration of [(Co(bpy)3]2+ Electron Mediator with Heterogeneous Photocatalysts for CO2 Conversion

An efficient chemical system for electron generation and transfer is constructed by the integration of an electron mediator ([Co(bpy)₃]²⁺; bpy=2,2′‐bipyridine) with semiconductor photocatalysts. The introduction of [Co(bpy)₃]²⁺ remarkably enhances the photocatalytic activity of pristine semiconductor photocatalysts for heterogeneous CO₂ conversion; this is attributable to the acceleration of charge separation. Of particular interest is that the excellent photocatalytic activity of heterogeneous catalysts can be developed as a universal photocatalytic CO₂ reduction system. The present findings clearly demonstrate that the integration of an electron mediator with semiconductors is a feasible process for the design and development of efficient photochemical systems for CO₂ conversion.     

Covalently Grafting Graphene onto Si Photocathode to Expedite Aqueous Photoelectrochemical CO2 Reduction

Silicon semiconductor functionalized with molecular catalysts emerges as a promising cathode for photoelectrochemical (PEC) CO₂ reduction reaction (CO₂RR). However, the limited kinetics and stabilities remains a major hurdle for the development of such composites. We herein report an assembling strategy of silicon photocathodes via chemically grafting a conductive graphene layer onto the surface of n⁺-p Si followed by catalyst immobilization. The covalently-linked graphene layer effectively enhances the photogenerated carriers transfer between the cathode and the reduction catalyst, and improves the operating stability of the electrode. Strikingly, we demonstrate that altering the stacking configuration of the immobilized cobalt tetraphenylporphyrin (CoTPP) catalyst through calcination can further enhance the electron transfer rate and the PEC performance. At the end, the graphene-coated Si cathode immobilized with CoTPP catalyst managed to sustain a stable 1-Sun photocurrent of −1.65 mA cm⁻² over 16 h for CO production in water at a near neutral potential of −0.1 V vs. reversible hydrogen electrode. This represents a remarkable improvement of PEC CO₂RR performance in contrast to the reported photocathodes functionalized with molecular catalysts.     

Zeolite-Encaged Pd–Mn Nanocatalysts for CO2 Hydrogenation and Formic Acid Dehydrogenation

A CO₂-mediated hydrogen storage energy cycle is a promising way to implement a hydrogen economy, but the exploration of efficient catalysts to achieve this process remains challenging. Herein, sub-nanometer Pd–Mn clusters were encaged within silicalite-1 (S-1) zeolites by a ligand-protected method under direct hydrothermal conditions. The obtained zeolite-encaged metallic nanocatalysts exhibited extraordinary catalytic activity and durability in both CO₂ hydrogenation into formate and formic acid (FA) dehydrogenation back to CO₂ and hydrogen. Thanks to the formation of ultrasmall metal clusters and the synergic effect of bimetallic components, the PdMn_0.6@S-1 catalyst afforded a formate generation rate of 2151 mol_formate mol_Pd⁻¹ h⁻¹ at 353 K, and an initial turnover frequency of 6860 mol mol_Pd⁻¹ h⁻¹ for CO-free FA decomposition at 333 K without any additive. Both values represent the top levels among state-of-the-art heterogeneous catalysts under similar conditions. This work demonstrates that zeolite-encaged metallic catalysts hold great promise to realize CO₂-mediated hydrogen energy cycles in the future that feature fast charge and release kinetics.     

Atomically Dispersed Nickel(I) on an Alloy‐Encapsulated Nitrogen‐Doped Carbon Nanotube Array for High‐Performance Electrochemical CO2 Reduction Reaction

Single‐atom catalysts (SACs) show great promise for electrochemical CO₂ reduction reaction (CRR), but the low density of active sites and the poor electrical conduction and mass transport of the single‐atom electrode greatly limit their performance. Herein, we prepared a nickel single‐atom electrode consisting of isolated, high‐density and low‐valent nickel(I) sites anchored on a self‐standing N‐doped carbon nanotube array with nickel–copper alloy encapsulation on a carbon‐fiber paper. The combination of single‐atom nickel(I) sites and self‐standing array structure gives rise to an excellent electrocatalytic CO₂ reduction performance. The introduction of copper tunes the d‐band electron configuration and enhances the adsorption of hydrogen, which impedes the hydrogen evolution reaction. The single‐nickel‐atom electrode exhibits a specific current density of ?32.87 mA cm^?2 and turnover frequency of 1962 h^?1 at a mild overpotential of 620 mV for CO formation with 97 % Faradic efficiency.