Enhanced Spatial Charge Separation in a Niobium and Tantalum Nitride Core-Shell Photoanode: In Situ Interface Bonding for Efficient Solar Water Splitting

Tantalum nitride (Ta₃N₅) has emerged as a promising photoanode material for photoelectrochemical (PEC) water splitting. However, the inefficient electron-hole separation remains a bottleneck that impedes its solar-to-hydrogen conversion efficiency. Herein, we demonstrate that a core–shell nanoarray photoanode of NbN_x-nanorod@Ta₃N₅ ultrathin layer enhances light harvesting and forms a spatial charge-transfer channel, which leads to the efficient generation and extraction of charge carriers. Consequently, an impressive photocurrent density of 7 mA cm⁻² at 1.23 V_RHE is obtained with an ultrathin Ta₃N₅ shell thickness of less than 30 nm, accompanied by excellent stability and a low onset potential (0.46 V_RHE). Mechanistic studies reveal the enhanced performance is attributed to the high-conductivity NbN_x core, high-crystalline Ta₃N₅ mono-grain shell, and the intimate Ta−N−Nb interface bonds, which accelerate the charge-separation capability of the core–shell photoanode. This study demonstrates the key roles of nanostructure design in improving the efficiency of PEC devices.     

Phase study of the system Li2Se-In2Se3

The binary system Li₂Se-In₂Se₃ was investigated in the range of 40 to 100 mol% In₂Se₃ by thermoanalytical and X-ray methods. The system is characterized by two eutectic points. Beside the two binary components and the known ternary compound LiInSe2 another ternary compound crystallizes in this binary system at 83.3 mol% In₂Se₃. This compound was identified as LiIn₅Se₈. In contrast to (Cu, Ag)^IB₅ ^IIIC₈ ^VI compounds such as CuIn₅S₈ [1] it does not crystallize in the spinel structure. LiIn₅Se₈ shows a stratified structure. The melting point was determined to be at 810°C. Starting from room temperature up to the melting point no phase transitions were observed. This revised version was published online in July 2006 with corrections to the Cover Date.     

BiVO4/ZnFe2O4同型异质结光阳极的构筑及其光电催化分解水性能

光生电子-空穴对的复合被认为是限制BiVO₄材料光电催化转换效率的重要原因之一。基于此,通过简单的水热-煅烧方法构筑了BiVO₄/ZnFe₂O₄同型异质结光阳极,BiVO₄/ZnFe₂O₄复合光阳极在1.23 V(vs RHE)下的光电流密度为3.33 mA·cm^-2,较纯BiVO₄提升了2倍(1.20 mA·cm^-2)。相关的结构及性能测试表明,BiVO₄和ZnFe₂O₄形成了带隙错开的n-n异质结,使得光生载流子得到有效分离,更有效地参与水氧化过程,进而提高了BiVO₄的光电催化水分解性能。     

高效的CdS/Ti-Fe2O3异质结光阳极:研究Z型电荷迁移机制增强光电化学水氧化活性

近年来以Z型机制为转移的光催化体系成微光电化学分解水领域的研究热点.相比较传统的异质结,Z型异质结能够保留具有高氧化能力与高还原能力的位点,从而提高光电化学效率.其中,证明电荷的Z型迁移机制成为研究人员努力的方向,比较有效的证明方法包括自由基捕获、XPS分析和检测还原位点等.对于Z型异质结,界面电场处电荷的迁移行为是至关重要的,但目前常用的证明手段对界面电场处电荷的迁移行为研究还比较少.因此,本文精心设计了CdS/Ti-Fe₂O₃异质结光阳极来探索光电化学分解水中的电荷转移行为.采用开尔文探针测试、表面光电压谱测试和瞬态光电压谱测试等光物理测试手段监测CdS/Ti-Fe₂O₃Z型异质结光阳极界面电场中光生电荷的迁移行为.其中,开尔文探针和表面光电压测量表明,CdS/Ti-Fe₂O₃界面驱动力有利于激发电子快速迁移至CdS;由于Z型异质结是一个双光子的过程,因此在瞬态光电压的过程中采取了双光束策略,即用不同波长的光分别从两个半导体侧进行照光,以充分发挥内层CdS的电子传输层的作用.结果表明,在双光束照射下界面电场增强,使得更多Ti-Fe₂O₃电子与CdS空穴结合,使得更多Ti-Fe₂O₃电子与CdS空穴结合,更多的空穴迁移到Ti-Fe₂O₃的表面去参与反应,充分证明了CdS/Ti-Fe₂O₃光阳极的Z型迁移机制.基于界面电场有效的电荷迁移与分离的分析,对Z型异质结光阳极进行了光电化学的测试,与单纯Ti-Fe₂O₃光阳极相比,CdS/Ti-Fe₂O₃光阳极表现出优异的光电化学性能.其中,25CdS/Ti-Fe₂O₃光阳极的光电流密度在1.23V(相对于标准氢电极)达到1.94 mA/cm²,比单纯Ti-Fe₂O₃光电流高出两倍.阻抗测试结果表明,CdS/Ti-Fe₂O₃光阳极能够减小电荷传输阻力,从而加快电荷分离效率,这也间接证明了Z型光阳极的成功构筑,因此,本文提供了一个有效且新颖的手段来证明光电化学分解水中光催化系统的Z型电荷转移机制.     

Surviving High‐Temperature Calcination: ZrO2‐Induced Hematite Nanotubes for Photoelectrochemical Water Oxidation

Nanotubular Fe₂O₃ is a promising photoanode material, and producing morphologies that withstand high‐temperature calcination (HTC) is urgently needed to enhance the photoelectrochemical (PEC) performance. This work describes the design and fabrication of Fe₂O₃ nanotube arrays that survive HTC for the first time. By introducing a ZrO₂ shell on hydrothermal FeOOH nanorods by atomic layer deposition, subsequent high‐temperature solid‐state reaction converts FeOOH‐ZrO₂ nanorods to ZrO₂‐induced Fe₂O₃ nanotubes (Zr‐Fe₂O₃ NTs). The structural evolution of the hematite nanotubes is systematically explored. As a result of the nanostructuring and shortened charge collection distance, the nanotube photoanode shows a greatly improved PEC water oxidation activity, exhibiting a photocurrent density of 1.5 mA cm⁻² at 1.23 V (vs. reversible hydrogen electrode, RHE), which is the highest among hematite nanotube photoanodes without co‐catalysts. Furthermore, a Co‐Pi decorated Zr‐Fe₂O₃ NT photoanode reveals an enhanced onset potential of 0.65 V (vs. RHE) and a photocurrent of 1.87 mA cm⁻² (at 1.23 V vs. RHE).     

BiVO4/ZnFe2O4同型异质结光阳极的构筑及其光电催化分解水性能

光生电子-空穴对的复合被认为是限制BiVO₄材料光电催化转换效率的重要原因之一。基于此,通过简单的水热-煅烧方法构筑了 BiVO₄/ZnFe₂O₄同型异质结光阳极,BiVO₄/ZnFe₂O₄复合光阳极在 1.23 V(vs RHE)下的光电流密度为 3.33 mA·cm^-2,较纯BiVO₄提升了2倍 (1.20 mA·cm^-2)。相关的结构及性能测试表明,BiVO₄和ZnFe₂O₄形成了带隙错开的n-n异质结,使得光生载流子得到有效分离,更有效地参与水氧化过程,进而提高了BiVO₄的光电催化水分解性能。     

CFTS-3/In2S3/SnO2:F heterojunction structure as eco-friendly photocatalytic candidate for removing organic pollutants

In this paper, quaternary chalcogenide Cu₂FeSnS₄ (CFTS) thin films were synthesized by spray pyrolysis using multilayer deposition technique in which the number (N) of sequential deposition runs (DR) is N = 1, 2, 3 and 4. The delivered volume in each sample is (N × 300 ml). Correspondingly, samples are named CFTS-N. Chemical composition, morphological, structural, optical and electrical properties were characterized using dispersive X-ray spectrometry (EDX), scanning electron microscopy (SEM), X-ray diffraction (XRD), Raman spectroscopy, spectrophotometer and Hall Effect measurements. XRD and Raman spectroscopy show a purer phase and better crystalline quality of CFTS-3 than other films. Average particle size increases with DR and reaches a maximum value of about 60 nm for N = 3. Optical results show high absorption coefficient value about 10⁵ cm⁻¹ in visible range, with an optical band gap of about 1.47 eV. Electrical resistivity of CFTS-3 equals to 5.82 10⁻³ Ω cm which is the lowest value of these four samples. We have investigated the photocatalysis activity of various thin films by measuring the degradation of methylene blue (MB) and Rhodamine (RhB) as pollutant dyes. In particular we have compared the candidates: CFTS-3/SnO₂:F, CFTS-3/In₂S₃ and CFTS-3/In₂S₃/SnO₂:F. Under sun light irradiation, CFTS-3/In₂S₃/SnO₂:F heterojunction exhibits the best photodegradation rate (96%) of MB dye.     

Enhancing the CO2 Electroreduction of Fe/Ni-Pentlandite Catalysts by S/Se Exchange

The electrochemical reduction of CO₂ is an attractive strategy towards the mitigation of environmental pollution and production of bulk chemicals as well as fuels by renewables. The bimetallic sulfide Fe_4.5Ni_4.5S₈ (pentlandite) was recently reported as a cheap and robust catalyst for electrochemical water splitting, as well as for CO₂ reduction with a solvent-dependent product selectivity. Inspired by numerous reports on monometallic sulfoselenides and selenides revealing higher catalytic activity for the CO₂ reduction reaction (CO₂RR) than their sulfide counterparts, the authors investigated the influence of stepwise S/Se exchange in seleno-pentlandites Fe_4.5Ni_4.5S_8-YSe_Y (Y=1–5) and their ability to act as CO₂ reducing catalysts. It is demonstrated that the incorporation of higher equivalents of selenium favors the CO₂RR with Fe_4.5Ni_4.5S₄Se₄ revealing the highest activity for CO formation. Under galvanostatic conditions in acetonitrile, Fe_4.5Ni_4.5S₄Se₄ generates CO with a Faradaic Efficiency close to 100 % at applied current densities of −50 mA cm⁻² and −100 mA cm⁻². This work offers insight into the tunability of the pentlandite based electrocatalysts for the CO₂ reduction reaction.     

氢氟酸腐蚀对α-Fe2O3薄膜光解水电极光电化学性质的影响

使用溶胶-凝胶法制备了α-Fe₂O₃薄膜,研究了氢氟酸腐蚀薄膜表面对其光电化学性质的影响. 实验发现,薄膜表面的孔洞和间隙随着氢氟酸浸蚀时间的增长而发生变化. 氢氟酸浸蚀5 min,α-Fe₂O₃电极的光电流降低;随后随浸蚀时间增加而迅速增加;当浸蚀时间大于15 min时,其光电流再次下降,但对浸蚀过的样品再次退火可以使光电流大幅增加. 通过电化学交流阻抗谱、拉曼和X射线光电子能谱分析,提出了两个影响光电流的因素：氢氟酸表面浸蚀造成薄膜表面的多孔性和结晶度降低. 为此,通过示意图解释了结合浸蚀和退火后处理两个步骤来增强α-Fe₂O₃薄膜光解水电极光电活性的原理. 相对于初始的α-Fe₂O₃电极,浸蚀并且再退火处理后,其光电性质更加稳定.     

Zur Kenntnis des quaternären Systems Zn?In?S?Se Der Schnitt ZnIn2S4?Znln2Se4?In2S3?In2Se3

The Quaternary System ZnIn₂S₄? ZnIn₂Se₄? In₂Se₃? In₂S₃ The title system has been investigated on the indium rich side (ratio In/Zn ≥ 2) on samples quenched from 800°C to room temperature using x-ray methods. In this section 7 different phases could be identified the phase borders of which are given. ZnIn₂S₄-type and thiogallate type mixed crystals only show a small region of homogeneity while the monophase region of spinel type mixed crystals in the indiumsulfide rich part of the phase diagram has a larger extension. There is a new trigonal compound ZnIn₂S₂Se₂ (a_hex = 3.937, c_hex = 31.97 Å) with a large region of homogeneity. In the indiumselenide rich part there are two new phases: (i) Zn_0.4In₂Se_3.4 with unknown structure and (ii) a ternary phase of unknown structure in the system In₂S_3?xSe_x for 2.1 ≤ x ≤ 2.7.     

A BiVO4 Photoanode with a VOx Layer Bearing Oxygen Vacancies Offers Improved Charge Transfer and Oxygen Evolution Kinetics in Photoelectrochemical Water Splitting

Sluggish oxygen evolution kinetics are one of the key limitations of bismuth vanadate (BiVO₄) photoanodes for efficient photoelectrochemical (PEC) water splitting. To address this issue, we report a vanadium oxide (VO_x) with enriched oxygen vacancies conformally grown on BiVO₄ photoanodes by a simple photo-assisted electrodeposition process. The optimized BiVO₄/VO_x photoanode exhibits a photocurrent density of 6.29 mA cm⁻² at 1.23 V versus the reversible hydrogen electrode under AM 1.5 G illumination, which is ca. 385 % as high as that of its pristine counterpart. A high charge-transfer efficiency of 96 % is achieved and stable PEC water splitting is realized, with a photocurrent retention rate of 88.3 % upon 40 h of testing. The excellent PEC performance is attributed to the presence of oxygen vacancies in VO_x that forms undercoordinated sites, which strengthen the adsorption of water molecules onto the active sites and promote charge transfer during the oxygen evolution reaction. This work demonstrates the potential of vanadium-based catalysts for PEC water oxidation.     

Phase Instability in van der Waals In2Se3 Determined by Surface Coordination

van der Waals In₂Se₃ has attracted significant attention for its room-temperature 2D ferroelectricity/antiferroelectricity down to monolayer thickness. However, instability and potential degradation pathway in 2D In₂Se₃ have not yet been adequately addressed. Using a combination of experimental and theoretical approaches, we here unravel the phase instability in both α- and β′-In₂Se₃ originating from the relatively unstable octahedral coordination. Together with the broken bonds at the edge steps, it leads to moisture-facilitated oxidation of In₂Se₃ in air to form amorphous In₂Se_3−3xO_3x layers and Se hemisphere particles. Both O₂ and H₂O are required for such surface oxidation, which can be further promoted by light illumination. In addition, the self-passivation effect from the In₂Se_3−3xO_3x layer can effectively limit such oxidation to only a few nanometer thickness. The achieved insight paves way for better understanding and optimizing 2D In₂Se₃ performance for device applications.     

g-C_3N_4基多功能层光阳极在光电化学水分解中的应用（英文）

光电化学分解水制氢可以一并解决环境问题和能源危机,因而成为研究热点.由于TiO_2 禁带宽度较大,不能有效吸收太阳光中的可见光,使光电化学分解水制氢的应用受限.g-C_3N_4的禁带宽度约为2.7 e V,能有效吸收可见光,但g-C_3N_4薄膜制备研究较少.我们通过热聚缩合法直接在FTO导电玻璃上制备出g-C_3N_4薄膜,发现其光电化学分解水制氢稳定性不高,选择易制备的TiO_2 作为保护层可以提高g-C_3N_4的耐用性.此外,为提高g-C_3N_4光生电子空穴对的分离能力,依靠Co-Pi对光生空穴的捕获作用而将其覆盖在最外层.因此本文首次制备一种新型的g-C_3N_4/TiO_2 /Co-Pi光阳极用于光电化学分解水制氢,其中g-C_3N_4用作光吸收层,TiO_2 用作保护层,Co-Pi用作空穴捕获层.并在此基础上,通过扫描电子显微镜(SEM),X射线衍射(XRD),紫外可见光谱(UV-Vis)等手段研究了g-C_3N_4/TiO_2 /Co-Pi光阳极的形貌特征和光电化学性能.SEM、EDS和XRD结果表明,g-C_3N_4/TiO_2 /Co-Pi光阳极被成功制备在了FTO导电玻璃上,厚度约为3μm.UV-Vis测试表明,g-C_3N_4的光吸收边约为470 nm,可以有效地吸收可见光,并且g-C_3N_4的框架结构使光多次反射折射增加了光的捕获能力,由此可见,g-C_3N_4能够发挥很好的光吸收层作用.通过对g-C_3N_4光阳极,g-C_3N_4/TiO_2 光阳极和g-C_3N_4/TiO_2 /Co-Pi光阳极的电流电压测试发现,g-C_3N_4/TiO_2 光阳极的光电流密度小于g-C_3N_4光阳极,而g-C_3N_4/TiO_2 /Co-Pi光阳极的光电流密在可逆氢电极1.1 V下达到了0.346 mA?cm–2,约为单独g-C_3N_4光阳极的3.6倍.这说明Co-Pi是提升g-C_3N_4光电化学性能的主要因素.电化学阻抗测试结果发现,g-C_3N_4/TiO_2 /Co-Pi光阳极的界面电荷转移电阻小于g-C_3N_4光阳极的,这表明g-C_3N_4/TiO_2 /Co-Pi光阳极界面处载流子转移较快,同时也能促进内部光生电子空穴对的分离,整体性能的提高应该主要归因于Co-Pi对光生空穴的捕获作用.恒电压时间测试展示出g-C_3N_4/TiO_2 /Co-Pi光阳极的光电流密度在2 h测试过程中没有明显下降,表明g-C_3N_4/TiO_2 /Co-Pi光阳极是相当稳定的,具有良好的耐用性,归因于TiO_2 和Co-Pi的共同保护作用,主要归因于TiO_2 层对FTO导电玻璃上的g-C_3N_4薄膜保护,从电化学沉积Co-Pi到所有测试结束.总体而言,g-C_3N_4/TiO_2 /Co-Pi光阳极加强的光电化学性能归因于以下几个因素:(1)g-C_3N_4优异的光吸收能力;(2)TiO_2 稳定的保护提升了g-C_3N_4薄膜的耐用性;(3)Co–Pi对光生空穴的捕获有效促进了光生电子空穴对的分离.     

Enhanced Photoelectrochemical Water Oxidation from CdTe Photoanodes Annealed with CdCl2

Most CdTe photoanodes and photocathodes show positive and negative photocurrent onset potentials for water oxidation and reduction, respectively, and are thus unable to drive photoelectrochemical (PEC) water splitting without external applied biases. Herein, the activity of a CdTe photoanode having an internal p‐n junction during PEC water oxidation was enhanced by applying a CdCl₂ annealing treatment together with surface modifications. The resulting CdTe photoanode generated photocurrents of 1.8 and 5.4 mA cm^?2 at 0.6 and 1.2 V_RHE, respectively, with a photoanodic current onset potential of 0.22 V_RHE under simulated sunlight (AM 1.5G). The CdCl₂ annealing increased the grain sizes and lowered the density of grain boundaries, allowing more efficient charge separation. Consequently, a two‐electrode tandem PEC cell comprising a CdTe‐based photoanode and photocathode split water without any external bias at a solar‐to‐hydrogen conversion efficiency of 0.51 % at the beginning of the reaction.     

Highly Efficient Photoelectrochemical Water Splitting with an Immobilized Molecular Co4O4 Cubane Catalyst

Molecular Co₄O₄ cubane water oxidation catalysts were combined with BiVO₄ electrodes for photoelectrochemical (PEC) water splitting. The results show that tuning the substituent groups on cobalt cubane allows the PEC properties of the final molecular catalyst/BiVO₄ hybrid photoanodes to be tailored. Upon loading a new cubane complex featuring alkoxy carboxylato bridging ligands ( 1 h ) on BiVO₄, an AM 1.5G photocurrent density of 5 mA cm⁻² at 1.23 V vs. RHE for water oxidation was obtained, the highest photocurrent for undoped BiVO₄ photoanodes. A high solar‐energy conversion efficiency of 1.84 % was obtained for the integrated photoanode, a sixfold enhancement over that of unmodified BiVO₄. These results and the high surface charge separation efficiency support the role of surface‐modified molecular catalysts in improving PEC performance and demonstrate the potential of molecule/semiconductor hybrids for efficient artificial photosynthesis.     

Heterostructured CoO/3D-TiO<Subscript>2</Subscript> nanorod arrays for photoelectrochemical water splitting hydrogen production

Homogeneous p-type cobalt (II) oxide (CoO) nanoparticles were successfully deposited on n-type three-dimensional branched TiO₂ nanorod arrays (3D-TiO₂) through photochemical deposition and thermal decomposition to form a novel CoO/3D-TiO₂ p-n heterojunction nanocomposite. Due to the narrow band gap of CoO nanoparticles (~2.4 eV), the as-synthesized CoO/3D-TiO₂ exhibited an excellent visible light absorption. The amounts of deposited CoO nanoparticles obviously influence the hydrogen production rate in the photoelectrochemical (PEC) water splitting. The as-synthesized CoO/3D-TiO₂-5 obtains the highest PEC hydrogen production rate of 0.54 mL h^?1 cm^?2 after five-time CoO deposition cycles (at a potential of 0.0 V vs Ag/AgCl). The photocurrent density of CoO/3D-TiO₂-5 is 1.68 mA cm^?1, which is ca. 2.5 times greater than that of pure 3D-TiO₂. The results showed that the formation of internal electrical-field between the CoO/3D-TiO₂ heterojunction, which has a direction from n-type TiO₂ to p-type CoO, facilitated the charge separation and transfer and resulted in a high efficiency and stable PEC activity.     

Z-Scheme In2S3/NU-1000 Heterojunction for Boosting Photo-Oxidation of Sulfide into Sulfoxide under Ambient Conditions

Photocatalytic oxidation of sulfide into sulfoxide has attracted extensive attention as an environmentally friendly strategy for chemical transformations or toxic chemicals degradation. Herein, we construct a series of In₂S₃/NU-1000 heterojunction photocatalysts, which can efficiently catalyze the oxidation of sulfides to form sulfoxides as the sole product under LED lamp (full-spectrum) illumination in air at room temperature. Especially, the sulfur mustard simulant, 2-chloroethyl ethyl sulfide (CEES), can also be photocatalytically oxidized with In₂S₃/NU-1000 to afford nontoxic 2-chloroethyl ethyl sulfoxide (CEESO) selectively and effectively. In contrast, individual NU-1000 and In₂S₃ show very low catalytic activity on this reaction. The significantly improved photocatalytic activity is ascribed to the constructing of an efficient Z-scheme photocatalysts In₂S₃/NU-1000, which exhibits the enhancement of light harvesting, the promotion of photogenerated electron-hole separation, and the retention of high porosity of the parent MOF. Moreover, mechanism studies in photocatalytic oxidation reveal that the superoxide radical (^.O₂⁻) and singlet oxygen (¹O₂) are the main oxidative species in the oxidation system. This work exploits the opportunities for the construction of porous Z-scheme photocatalysts based on the photoactive MOFs materials and inorganic semiconductors for promoting catalytic organic transformations. More importantly, it provides a route to the rational design of efficient photocatalysts for the detoxification of mustard gas.     

Boosting the photoelectrochemical water oxidation performance of bismuth vanadate by ZnCo2O4 nanoparticles

Due to the involvement of four-electron transfer process at photoanode,water oxidation is the ratelimiting step in water splitting reaction.To settle this dilemma,ZnCo₂ O₄ nanoparticles are combined with BiVO₄ to form a p-n ZnCo₂ O₄/BiVO₄ heterojunction photoanode,which is proved by an input voltage-output current test.The built-in electric field formed within the heterojunction structure promotes the effective separation of elect...     

Synthesis of mesoporous functional hematite nanofibrous photoanodes by electrospinning

Iron(III) oxide (hematite, Fe₂O₃) nanofibers, as visible light‐induced photoanode for water oxidation reaction of a water splitting process, were fabricated through electrospinning method followed by calcination treatment. The prepared samples were characterized with scanning electron microscopy, and three‐electrode galvanostat/potentiostat for evaluating their photoelectrochemical (PEC) properties. The diameter of the as‐spun fibers is about 300 nm, and calcinated fibers have diameter less than 110 nm with mesoporous structure. Optimized multilayered electrospun α‐Fe₂O₃ nanostructure mats showed photocurrent density of 0.53 mA/cm² under dark and visible illumination conditions at voltage 1.23 V and constant intensity (900 mW/cm²). This photovoltaic performance of nanostructure mats makes it suitable choice for using in the PEC water splitting application as an efficient photoanode. This method, if combined with appropriate flexible conductive substrate, has the potential for producing flexible hematite solar fuel generators. Copyright © 2015 John Wiley & Sons, Ltd.     

Mixed Cu2Se Hexagonal Nanosheets@Co3Se4 Nanospheres for High-Performance Asymmetric Supercapacitors

Rational designing and constructing multiphase hybrid electrode materials is an effective method to compensate for the performance defects of the single component. Based on this strategy, Cu₂Se hexagonal nanosheets@Co₃Se₄ nanospheres mixed structures have been fabricated by a facile two-step hydrothermal method. Under the synergistic effect of the high ionic conductivity of Cu₂Se and the remarkable cycling stability of Co₃Se₄, Cu₂Se@Co₃Se₄ can exhibit outstanding electrochemical performance as a novel electrode material. The as-prepared Cu₂Se@Co₃Se₄ electrode displays high specific capacitance of 1005 F g⁻¹ at 1 A g⁻¹ with enhanced rate capability (56 % capacitance retention at 10 A g⁻¹), and ultralong lifespan (94.2 % after 10 000 cycles at 20 A g⁻¹). An asymmetric supercapacitor is assembled applying the Cu₂Se@Co₃Se₄ as anode and graphene as cathode, which delivers a wide work potential window of 1.6 V, high energy density (30.9 Wh kg⁻¹ at 0.74 kW kg⁻¹), high power density (21.0 Wh kg⁻¹ at 7.50 kW kg⁻¹), and excellent cycling stability (85.8 % after 10 000 cycles at 10 A g⁻¹).