Organolead Halide Perovskite Nanocrystals: Branched Capping Ligands Control Crystal Size and Stability

CH₃NH₃PbBr₃ perovskite nanocrystals (PNCs) of different sizes (ca. 2.5–100 nm) with high photoluminescence (PL) quantum yield (QY; ca. 15–55 %) and product yield have been synthesized using the branched molecules, APTES and NH₂‐POSS, as capping ligands. These ligands are sterically hindered, resulting in a uniform size of PNCs. The different capping effects resulting from branched versus straight‐chain capping ligands were compared and a possible mechanism proposed to explain the dissolution–precipitation process, which affects the growth and aggregation of PNCs, and thereby their overall stability. Unlike conventional PNCs capped with straight‐chain ligands, APTES‐capped PNCs show high stability in protic solvents as a result of the strong steric hindrance and propensity for hydrolysis of APTES, which prevent such molecules from reaching and reacting with the core of PNCs.     

Channeling Exciton Migration into Electron Transfer in Formamidinium Lead Bromide Perovskite Nanocrystal/Fullerene Composites

Hydrophobically capped nanocrystals of formamidinium lead bromide (FAPbBr₃) perovskite (PNC) show bright and stable fluorescence in solution and thin‐film states. When compared with isolated PNCs in a solution, close‐packed PNCs in a thin film show extended fluorescence lifetime (ca. 4.2 μs), which is due to hopping or migration of photogenerated excitons among PNCs. Both fluorescence quantum efficiency and lifetime decrease in a PNC thin film doped with fullerene (C₆₀), which is attributed to channeling of exciton migration into electron transfer to C₆₀. On the other hand, quenching of fluorescence intensity of a PNC solution is not accompanied by any change in fluorescence lifetime, indicating static electron transfer to C₆₀ adsorbed onto the hydrophobic surface of individual PNCs. Exciton migration among close‐packed PNCs and electron transfer to C₆₀ places C₆₀‐doped PNC thin films among cost‐effective antenna systems for solar cells.     

Synthesis and characterization of poly(t-butyl methacrylate-b-isoprene-b-t-butyl methacrylate) block copolymers by anionic techniques

Poly(t-butyl methacrylate-b-isoprene-b-t-butyl methacrylate) block copolymers have been synthesized in a controlled manner by anionic techniques. The block copolymers demonstrated predictable chemical composition and stereochemistry, and narrow molecular weight distributions. The addition of a polar solvent was required after complete conversion of the diene block in order to preserve the high 1,4 microstructure of the diene phase and to facilitate the efficient crossover to the poly(t-butyl methacrylate) lithium enolate. Thermomechanical analysis (TMA) of the triblock copolymers demonstrated a microphase separated morphology. The glass transition temperatures of the diene phase and acrylic phase were approximately ?70 and 120°C, respectively. Cast films of the block copolymers from polar and nonpolar solvents were optically clear and elastic.     

RAFT polymerization of tertiary sulfonium zwitterionic monomer in aqueous media for synthesis of protein stabilizing double hydrophilic block copolymers

The reversible addition-fragmentation chain-transfer (RAFT) polymerization of a tertiary sulfonium-containing zwitterionic monomer (N-acryloyl-L-methionine methyl sulfonium salt: A-Met[S⁺]-OH) was performed in aqueous media in the presence of a water-soluble chain-transfer agent (CTA). Several parameters, such as the radical initiator, nature of the salt used as an additive, polymerization temperature, and solvent (water, buffer solution, and mixed solvents), were studied. The polymerization of A-Met(S⁺)-OH in acetate buffer using a trithiocarbonate-type CTA having two carboxylic acid moieties proceeded in a controlled fashion at 45°C, as confirmed by the low polydispersity of the products (M _w/M _n < 1.1) and pre-determined molecular weights. Poly(ethylene glycol)-based macro-CTA was also employed for the polymerization of A-Met(S⁺)-OH in mixed solvents (H₂O/EtOH and H₂O/DMF = 70/30 vol%) to afford novel nonionic-zwitterionic double hydrophilic block copolymers. The chain extension of the hydrophilic poly(N,N-dimethylacrylamide) macro-CTA with A-Met(S⁺)-OH was well controlled in pure water under the appropriate conditions, resulting in the formation of block copolymers with “as-designed” chain structures and relatively low dispersities (M _w/M _n < 1.3). The resulting sulfonium-containing double hydrophilic block copolymers having optimal nonionic/zwitterionic balance were efficient protein-stabilizing agents.     

Synthesis of star‐shaped copolymers with methyl methacrylate and n‐butyl methacrylate by metal‐catalyzed living radical polymerization: Block and random copolymer arms and microgel cores

Various star‐shaped copolymers of methyl methacrylate (MMA) and n‐butyl methacrylate (nBMA) were synthesized in one pot with RuCl₂(PPh₃)₃‐catalyzed living radical polymerization and subsequent polymer linking reactions with divinyl compounds. Sequential living radical polymerization of nBMA and MMA in that order and vice versa, followed by linking reactions of the living block copolymers with appropriate divinyl compounds, afforded star block copolymers consisting of AB‐ or BA‐type block copolymer arms with controlled lengths and comonomer compositions in high yields (≥90%). The lengths and compositions of each unit varied with the amount of each monomer feed. Star copolymers with random copolymer arms were prepared by the living radical random copolymerization of MMA and nBMA followed by linking reactions. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 633–641, 2002; DOI 10.1002/pola.10145     

Synthesis and properties of polydimethylsiloxane-containing block copolymers via living radical polymerization

Polydimethylsiloxane (PDMS) block copolymers were synthesized by using PDMS macroinitiators with copper-mediated living radical polymerization. Diamino PDMS led to initiators that gave ABA block copolymers, but there was low initiator efficiency and molecular weights are somewhat uncontrolled. The use of mono- and difunctional carbinol–hydroxyl functional initiators led to AB and ABA block copolymers with narrow polydispersity indices (PDIs) and controlled number-average molecular weights (M_n's). Polymerization with methyl methacrylate (MMA) and 2-dimethylaminoethyl methacrylate (DMAEMA) was discovered with a range of molecular weights produced. Polymerizations proceeded with excellent first-order kinetics indicative of living polymerization. ABA block copolymers with MMA were prepared with between 28 and 84 wt % poly(methyl methacrylate) with M_n's between 7.6 and 35 K (PDI <1.30), which show thermal transitions characteristic of block copolymers. ABA block copolymers with DMAEMA led to amphiphilic block copolymers with M_n's between 9.5 and 45.7 K (PDIs of 1.25–1.70), which formed aggregates in solution with a critical micelle concentration of 0.1 g dm⁻³ as determined by pyrene fluorimetry experiments. Monocarbinol functional PDMS gave AB block copolymers with both MMA and DMAEMA. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1833–1842, 2001     

Synthesis of polymers having zwitterionic structure via the radical polymerization of 4-vinylphenyl isothiocyanate/cyclic amidine adduct

Polymers having a zwitterionic pendant group have found a wide range of applications such as fungicides, fire-retardants, lubricating oil additives, emulsifiers, cryoprotectants, and electronic materials. Their properties depend not only on the polymer main chains but also on the zwitterionic structures. In this article, the synthesis of novel polymers having zwitterionic structures is described. A zwitterionic monomer (4-vinylphenyl isothiocyanate [VPI]-1,2-dimetyl-1,4,5,6,-tetrahydropirimidine [DMTHP]) was synthesized by the reaction of VPI and a cyclic amidine DMTHP. A radical polymerization of VPI-DMTHP was carried out using 2,2′-azobis(2,4-dimethyl-4-methoxy)valeronitrile (V-70) as an initiator to give poly(VPI-DMTHP). The obtained poly(VPI-DMTHP) was not soluble in any of the investigated organic solvents, probably because it had a networked structure resulting from the ionic interactions. Copolymers of VPI-DMTHP and other vinyl monomers such as styrene, methyl methacrylate, t-butyl methacrylate, and N-vinylpyrrolidone were synthesized. The obtained copolymers were also insoluble in all of the examined common organic solvents even when the VPI-DMTHP content was low (5 mol %), indicating the existence of strong ionic interactions in the zwitterionic moieties. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2303–2309     

Synthesis of Poly(Styrene)-block-poly(methacrylate)-block-poly(styrene) via Site Transformation Reaction

Abstract

Triblock copolymers with polystyrene outer blocks and an inner polymethacrylate block were synthesized by a site transformation reaction using anionic and cationic polymerization techniques. In order to obtain such ABA block copolymers, two synthetic routes have been applied. In the first case, different methacrylates (methyl methacrylate, 2-ethylhexyl methacrylate) were polymerized anionically with a bifunctional initiator to get poly(methacrylate) dianions later forming the inner block whereas in the second case poly(styrene)-block-poly(methacrylate) anions were synthesized by monofunctional initiation via sequential monomer addition. In a subsequent step, the living chain ends of the methacrylate dianions on one side, and the diblock copolymer anions on the other side, were functionalized with 1,4-bis(l-bromoethyl)benzene in order to obtain a potential bifunctional or monofunctional macroinitiator for the cationic polymerization of styrene. Then, styrene was polymerized cationically with the macroinitiator in the presence of SnCl₄ as coinitiator and _n Bu₄NBr as a common ion salt in CH₂Cl₂ at -15°C. Block formation was proven by SEC measurements, preparative SEC and NMR characterization.     

Copolymers of 2-hydroxyethyl methacrylate and alkyl methacrylates. I. Synthesis and characterization

Copolymerization of 2-hydroxyethyl methacrylate (HEMA) with ethyl methacrylate (EMA) and n-butyl methacrylate (BMA) was carried out in bulk at 70°C ± 1°C using 0.2% benzoyl peroxide as initiator in nitrogen atmosphere. Number average molecular weight (M _n) of the copolymers was determined by dynamic osmometry. Intrinsic viscosity [η] of HEMA-BMA copolymers was evaluated at 35°C in dimethyl formamide. These copolymers were also characterized by infrared spectroscopy and density measurements. Cohesive energy densities (CED) of these polymers were determined by observing their swelling behavior in different solvents. It was found that a decrease in alkyl methacrylate content resulted in an increase in the CED values of the copolymers.     

Ionic Liquids - New Solvents in the Free Radical Polymerization

Summary: The analysis of the influence of ionic liquids (ILs) in polymer synthesis as an alternative for common organic solvents is still an active field of research. 1 Using ILs as solvents for free radical polymerizations implies a significant increase in polymerization rates and molecular weights which can be observed. In this work we examined the copolymerization behaviour of styrene (S) and methyl methacrylate (MMA), glycidyl methacrylate (GMA) and 2-hydroxypropyl methacrylate (HPMA) with acrylonitrile (AN) in 1-etyhl-3-methylimidazolium ethylsulfate ([EMIM]EtSO₄). ILs are liquids with comparable high polarities and viscosities. These two characteristic properties are strongly correlated with the rate coefficients of propagation k_p and termination k_t. 2 - 4 The rate constant of termination k_t decreases when the IL concentration and therefore the viscosity of the reaction mixture is increased, whereas the propagation rate coefficient k_p increases with increasing IL content. The viscosity of the IL can be varied by either working with mixtures of IL with conventional organic solvents – here the IL [EMIM]EtSO₄ was mixed with DMF – or by variation of the temperature. The influence of the viscosity of the IL ([EMIM]EtSO₄) on polymerization kinetics of methyl methacrylate (MMA) and styrene/acrylonitrile (S/AN) was investigated.     

Preparation of block copolymers from occluded vinyl acetate macroradicals

Stable vinyl acetate macroradicals were produced by polymerization in a nonviscous poor solvent, a viscous good solvent and a viscous poor solvent. These macroradicals were then allowed to react with a second vinyl monomer to produce block copolymers. The formation of block copolymers was monitored for rate and yield data. The block copolymers produced were poly(vinyl acetate-b-methyl methacrylate), poly(vinyl acetate-b-acrylic acid), poly(vinyl acetate-b-vinylpyrrolidone), poly(vinyl acetate-b-acrylonitrile), poly(vinyl acetate-b-styrene), and poly(vinyl acetate-b-methyl acrylate). The block copolymers were characterized by yield, precipitation in selected solvents, pyrolysis gas chromatography, and differential scanning calorimetry.     

Synthesis and morphology of polyethylene‐block‐poly(methyl methacrylate) through the combination of metallocene catalysis with living radical polymerization

Polyethylene‐block‐poly(methyl methacrylate) (PE‐b‐PMMA) was successfully synthesized through the combination of metallocene catalysis with living radical polymerization. Terminally hydroxylated polyethylene, prepared by ethylene/allyl alcohol copolymerization with a specific zirconium metallocene/methylaluminoxane/triethylaluminum catalyst system, was treated with 2‐bromoisobutyryl bromide to produce terminally esterified polyethylene (PE‐Br). With the resulting PE‐Br as an initiator for transition‐metal‐mediated living radical polymerization, methyl methacrylate polymerization was subsequently performed with CuBr or RuCl₂(PPh₃)₃ as a catalyst. Then, PE‐b‐PMMA block copolymers of different poly(methyl methacrylate) (PMMA) contents were prepared. Transmission electron microscopy of the obtained block copolymers revealed unique morphological features that depended on the content of the PMMA segment. The block copolymer possessing 75 wt % PMMA contained 50–100‐nm spherical polyethylene lamellae uniformly dispersed in the PMMA matrix. Moreover, the PE‐b‐PMMA block copolymers effectively compatibilized homopolyethylene and homo‐PMMA at a nanometer level. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3965–3973, 2003     

Block copolymers by chemoenzymatic cascade polymerization: A comparison of consecutive and simultaneous reactions

The synthetic parameters for the chemoenzymatic cascade synthesis of block copolymers combining enzymatic ring‐opening polymerization (EROP) and atom transfer radical polymerization (ATRP) in one pot were investigated. A detailed analysis of the mutual interactions between the single reaction components revealed that the ATRP catalyst system could have a significant inhibiting effect on the enzyme activity. The inhibition of the enzyme was less pronounced in the presence of multivalent ligands such as dinonyl bipyridine, which thus could be used in this reaction as an ATRP catalyst. Moreover, the choice of the ATRP monomer was investigated. Methyl methacrylate interfered with EROP by transesterification, whereas t‐butyl methacrylate was inert. Block copolymers were successfully synthesized with this cascade approach by the activation of ATRP after EROP by the addition of the ATRP catalyst and, with lower block copolymer yields, by the mixing of all the components before the copolymerization. Adetailed kinetic analysis of the reactions and the structure of the block copolymers showed that the first procedure proceeded smoothly to high block copolymer yields, whereas in the latter a noteworthy amount of the poly(t‐butyl methacrylate) homopolymer was detected. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4290–4297, 2006     

Polyimide–polyformal block copolymers

In an effort to combine and tailor the properties of thermoplastic resins we have investigated the synthesis of polyimide–polyformal block copolymers prepared by the condensation reaction of α,ω-diamino functionalized polyformal oligomers with α,ω-dianhydride terminated polyimide oligomers. Amino functionalized polyformal oligomers were synthesized by displacement condensation reactions of various bisphenols with methylene dihalides in the presence of base and aminophenols. Oligomeric aromatic polyformals having weight average molecular weights (MW_w) of 7500 to 40,000 were obtained. Anhydride terminated polyimide oligomers with molecular weights (MW_w) ranging from 10,000 to 15,000 were obtained by the condensation of bisphenol-A–dianhydride and aromatic amines. Combining the polyimide oligomers with the polyformal oligomers in dipolar aprotic or nonpolar solvents afforded the desired block copolymers. The polyimide–polyformal block copolymers generally display two distinct glass transition temperatures by differential scanning calorimetry. The (AB)_n block copolymers were evaluated by TGA in both air and N₂ for thermal/oxidative stability.     

Conformational behavior of styrene–p-chlorostyrene triblock copolymers in dilute solutions. I. Composition dependence of conformational behavior

Dilute solution properties of (styrene-p-chlorostyrene) triblock copolymers in various solvents were studied over a wide range of molecular weight and composition. Viscosity and osmotic pressure results indicate that the conformational behavior of the B_mA_nB_m and A_mB_nA_m copolymers (A = styrene; B = p-chlorostyrene; m and n denote the number of units) are similar in nonselective solvents such as toluene and 2-butanone, but different in selective solvents such as carbon tetrachloride and cumene. Short-range and long-range interaction parameters of the block copolymers were determined by applying the Stockmayer–Fixman method to viscosity data and also by application of the equation relating the osmotic virial coefficient and the excluded volume. The results show that the unperturbed dimensions of the block copolymers vary linearly with composition, and long-range interaction parameters in nonselective solvents can be expressed by those of the parent homopolymers, the chemical composition, and values of the interaction parameter β_AB between styrene and p-chlorostyrene monomeric units.     

Polymerization of acrylates and bulky methacrylates with the use of zirconocene precursors: Block copolymers with methyl methacrylate

The polymerization behavior of cyclohexyl methacrylate and trimethylsilyloxyethyl methacrylate with the catalytic system Cp₂ZrMe₂/B(C₆F₅)₃/ZnEt₂ was examined. Block copolymers of these bulky methacrylates with methyl methacrylate (MMA), having high molecular weights and relatively narrow molecular weight distributions, were prepared. n‐Butyl acrylate and tert‐butyl acrylate were polymerized with various catalytic systems based on zirconocene complexes. These polymerizations seemed to proceed to a nonquantitative yield, producing polymers with high molecular weights and relatively low polydispersities. This behavior indicated the presence of termination reactions in the initiation step, which appeared to be faster than the propagation step. Block copolymers of these acrylates with MMA were synthesized with the catalytic system rac‐Et(Ind)₂ZrMe₂/[B(C₆F₅)₄]⁻[Me₂NHPh]⁺/ZnEt₂, starting from the polymerization of MMA. The block copolymers produced were well defined in most cases, as indicated by size exclusion chromatography, NMR, and differential scanning calorimetry measurements. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3337–3348, 2005     

Synthesis and characterization of amphiphilic triblock copolymers by iron‐mediated atom transfer radical polymerization

The atom transfer radical polymerization of methyl methacrylate (MMA) and n‐butyl methacrylate (n‐BMA) was initiated by a poly(ethylene oxide) chloro telechelic macroinitiator synthesized by esterification of poly(ethylene oxide) (PEO) with 2‐chloro propionyl chloride. The polymerization, carried out in bulk at 90 °C and catalyzed by iron(II) chloride tetrahydrate in the presence of triphenylphosphine ligand (FeCl₂ · 4H₂O/PPh₃), led to A–B–A amphiphilic triblock copolymers with MMA or n‐BMA as the A block and PEO as the B block. A kinetic study showed that the polymerization was first‐order with respect to the monomer concentration. Moreover, the experimental molecular weights of the block copolymers increased linearly with the monomer conversion, and the molecular weight distribution was acceptably narrow at the end of the reaction. These block copolymers turned out to be water‐soluble through the adjustment of the content of PEO blocks (PEO content >90% by mass). When the PEO content was small [monomer/macroinitiator molar ratio (M/I) = 300], the block copolymers were water‐insoluble and showed only one glass‐transition temperature. With an increase in the concentration of PEO (M/I = 100 or 50) in the copolymer, two glass transitions were detected, indicating phase separation. The macroinitiator and the corresponding triblock copolymers were characterized with Fourier transform infrared, proton nuclear magnetic resonance, size exclusion chromatography analysis, dynamic mechanical analysis, and differential scanning calorimetry. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5049–5061, 2005     

Synthesis of Vinyl Polymer—Poly (α-Amino Acid) Block Copolymers by End-Reactive Oligomers

In order to synthesize block copolymers consisting of segments having dissimilar properties, vinyl polymer - poly (α-amino acid) block copolymers were synthesized by two different methods. In the first method, the terminal amino groups of polysarcosine, poly(γ-benzyl L-glutamate), and poly(γ-benzyloxycarbonyl-L-lysine) were haloacetylated. The mixture of the terminally haloacetylated poly (α-amino acid) and styrene or methyl methacrylate was photoirradiated in the presence of Mo (CO)₆ or heated with Mo(CO)₆, yielding A-B-A-type block copolymers consisting of poly(α-amino cid) (the A component) and vinyl polymer(the B component). The characterization of block copolymers revealed that the thermally initiated polymerization of vinyl compounds by the trichloroacetyl poly(α-amino acid)/Mo(CO)₆ system was most suitable for the synthesis of vinyl polymer - poly-(α-amino acid) block copolymers. In the second method, poly (methyl methacrylate) and polystyrene having a terminal amino group were synthesized by the radical polymerization in the presence of 2-mercaptoethylammonium chloride. Using these polymers having a terminal amino group as an initiator, the block polymerizations of γ-benzyl L-glutamate NCA and e-benzyloxycarbonyl-L-lysine NCA were carried out, yielding A-B-type block copolymer. By eliminating the protecting groups of the side chains of poly(α-amino acid) segment, block copolymers such as poly(methyl methacrylate) with poly(L-glutamic acid) or poly(L-lysine) and polystyrene with poly(L-glutamic acid) and poly(L-lysine) were successfully synthesized.     

Synthesis and dielectric properties of novel liquid crystalline triblock copolymers with cyanobiphenyl moieties and poly(n‐butyl acrylate) segments

In this work, self‐assembly method was used to improve the dielectric constant of triblock copolymers. A series of ABA triblock copolymers with a defined length of poly(n‐butyl acrylate) (PBA, B block) segment and different lengths of liquid crystalline (LC) poly[11‐(4‐cyano‐4′‐biphenoxy)undecyl methacrylate] (P11CBMA, A block) segments were synthesized by using the atom transfer radical polymerization method. The well‐defined triblock copolymers P11CBMA_m‐b‐PBA_n‐b‐P11CBMA_m possess three different B/A ratios (n = 50, m = 17, 43, 53). Due to the supramolecular cooperative motion effect, the copolymers can form worm‐like microstructure (W_LC = 52.8%), cylinder‐like nanostructure with P11CBMA phase embedded in PBA matrix (W_LC = 73.9%), and wide stripe structure with LC domains distributed unevenly in a continuous PBA matrix (W_LC = 77.7%) after annealed at 160°C (above T_i) under N₂ for 24 h, respectively. In order to study the influence of microphase separated morphology of triblock copolymer on the dielectric properties, solvent annealing was also used to develop various nanostructures. After thermal or solvent annealing, the dielectric constants of block copolymers increased dramatically while their loss factors remained the same. For different block copolymers, the dielectric constants increased with the increase of the LC block length. For diverse treatments, dielectric permittivities of samples varied widely with different nanostructures. The results show that the dielectric constants of block copolymers could be tuned by the block ratios and the self‐assembled microstructures. These findings will inspire researchers using self‐assembly method to design and develop novel flexible materials with high dielectric permittivity. Copyright © 2014 John Wiley & Sons, Ltd.     

Organoboronium amphiphilic block copolymers

A new class of amphiphilic organometallic block copolymers with cationic organoboron pendant groups was developed. Selective replacement of one of the bromine substitutents on each boryl group of the block copolymer PSBBr₂‐b‐PS with an organometallic reagent ArM (ArM = 2,4,6‐trimethylphenyl copper, 4‐t‐butylphenyltrimethyl tin) followed by treatment with 2,2′‐bipyridine gave the novel block copolymers [ 3Ar ](Br)_n as light yellow solid materials that show good stability in air and moisture and high solubility in most organic solvents. Their structure and composition were confirmed by multinuclear NMR, GPC, and elemental analysis. Highly regular micellar aggregates form in block‐selective solvents (e.g., MeOH, toluene) as demonstrated by ¹H NMR, dynamic light scattering, and transmission electron microscopy. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6612–6618, 2009