Multi-wavelength generation using a bismuth-based EDF and Brillouin effect in a linear cavity configuration

The generation of a multiple wavelength source using a bismuth-based erbium-doped fiber (Bi-EDF) in a linear cavity configuration is demonstrated. The configuration uses a pair of optical circulators at the input and output ends of the cavity to form a resonator for multi-wavelength generation in conjunction with optical couplers to inject the Brillouin pump (BP) and to tap the output at the two ends. The Brillouin erbium fiber laser (BEFL) comb with a 2.15 m of Bi-EDF has a wavelength spacing of 0.09 nm and operates in long-wavelength (L-) band region. A stable output laser comb of 50 lines is obtained at a BP of 1568.2 nm and 5 dBm and two 1480 nm pumps at 120 mW. The injected BP wavelength and power as well as the 1480 nm pump powers have a great effect on the number of lines and output power of the BEFL. This configuration is compact due to the use of the significantly shorter Bi-EDF as the linear gain medium, and can be made more compact by replacing the single-mode fiber with highly non-linear fibers such as holey fibers.     

Simple tunable multiwavelength Brillouin/Erbium fiber laser utilizing short-length photonic crystal fiber

We have demonstrated a simple ring cavity tunable multiwavelength Brillouin/Erbium fiber laser (MWBEFL), in which 70 m highly nonlinear photonic crystal fiber (HNL-PCF) is used as the Brillouin gain medium. The fiber laser utilizes recycling mechanism to enhance stimulated Brillouin scattering (SBS). The configuration that consists of only 3 optical components is easy to be integrated and improves the practicality. At the maximum 1480 nm pump power of 110 mW and the Brillouin pump power of 3 dBm, 10 stable output channels with more than 10 dB optical signal to noise ratio (OSNR) and 0.078 nm channel spacing could achieve 10 nm tuning ranges.     

FWM-based multi-wavelength erbium-doped fiber laser using Bi-EDF

We experimentally demonstrate a simple structure but efficient multi-wavelength erbium-doped fiber laser (EDFL) using a 49 cm Bismuth-based erbium-doped fiber (Bi-EDF) as gain medium. The Bi-EDF provides erbium amplification and FWM effect in the cavity to generate a stable multi-wavelength comb operating in C-band region. We have achieved more than 5 lines with peak power of more than −35 dBm and channel spacing of 0.5 nm by incorporating a broadband fiber Bragg grating and polarization controller in the ring cavity.     

A tunable multi-wavelength Brillouin–erbium fiber laser with fourfold Brillouin frequency spacing

We have experimentally demonstrated a tunable multi-wavelength Brillouin–erbium fiber laser with over 40 GHz spacing utilizing two cascaded double Brillouin-frequency-spacing cavities. In this laser configuration, two segments of 25 km-long single-mode fibers are used as Brillouin gain medium in each ring cavity, and a segment of 8 m-long erbium-doped fiber with 980 nm pump is employed to amplify Brillouin pump (BP). At BP wavelength of 1550 nm, BP power of 8.3 dBm (6.8 mW) and the maximum 980 nm pump power of 27.78 dBm (600 mW), seven output channels with fourfold Brillouin-frequency spacing, and the tuning range of 15 nm from 1545 to 1560 nm are achieved. The proposed multi-wavelength Brillouin–erbium fiber laser has wide applications, such as in microwave signal generation and optical communications.     

Bismuth-based erbium-doped fiber as a gain medium for L-band amplification and Brillouin fiber laser

Bismuth-based erbium-doped fiber (Bi-EDF) is demonstrated as an alternative medium for optical amplification and nonlinear applications. The bismuth glass host provides the opportunity to be doped heavily with erbium ions to allow a compact optical amplifier design. The bismuth-based erbium-doped fiber amplifier (Bi-EDFA) is demonstrated to operate at wavelength region from 1570 to 1620 nm using only a 215 cm long of gain medium. The maximum gain of 15.8 dB is obtained at signal wavelength of 1610 nm with the corresponding noise figure of about 6.3 dB. A multi-wavelength laser comb is also demonstrated using a stimulated Brillouin scattering in the 215 cm long Bi-EDF assisted by the 1480 nm pumping. The laser generates more than 40 lines of optical comb with a line spacing of approximately 0.08 at 1612.5 nm region using 152 mW of 1480 nm pump power.     

Investigation on stimulated Brillouin scattering characteristics in a highly doped Bismuth-based Erbium-doped fiber

Stimulated Brillouin scattering (SBS) characteristics in a 49 cm long highly doped Bismuth-based Erbium doped fiber (Bi-EDF) is investigated in the ring and linear cavity configurations. At Brillouin pump (BP) power of 6 dBm, the Brillouin laser peak power of the optimized ring Brillouin Erbium fiber laser (BEFL) is obtained at 23 dB higher than the peak power of the conventional linear cavity at an up shifted wavelength of 0.08 nm. This Bi-EDF ring cavity operates at nearly 1563 nm wavelength region, which is up-shifted by 0.08 nm from the Brillouin pump wavelength with the side mode suppression ratios (SMSR) of 29 and 23 dB in the forward and backward directions, respectively.     

Multi-wavelength Brillouin fiber laser generation using dual-pass approach

A simple and compact multi-wavelength tunable Brillouin fiber laser (BFL) in conjunction with dual-pass approach is proposed and experimentally compared with the output of a conventional single ring cavity architecture. This BFL source is demonstrated using 10 km long non-zero dispersion shifted fiber (NZ-DSF) as a Brillouin gain medium. By single ring cavity configuration, odd-order Brillouin Stokes lines appear in the backward direction with the line spacing 0.16 nm (∼20 GHz) between each two consecutive waves. However, this single ring cavity in conjunction with dual-pass configuration is able to generate Brillouin Stokes lines with 0.08 nm spacing by providing bi-directional oscillations of Brillouin waves in both forward and backward directions. With a Brillouin pump power of 15.3 dBm, approximately up to 17 Brillouin Stokes lines are generated which is tunable over 40 nm tuning range.     

Directivity influence of signals propagation through EDFA gain medium of Brillouin-erbium fiber laser

We experimentally demonstrate a multiwavelength Brillouin-erbium fiber laser in two configurations; uni-directional and bi-directional propagation of Brillouin pump and Brillouin Stokes signals through an Erbium-doped fiber gain. The influence of these configurations on the performance of the output parameters in terms of lasing threshold, output channel generation and tuning range of the generated output channels are investigated. We discovered that there is a trade-off between these two fiber laser configurations. The uni-directional amplifier configuration provides greater tuning range of 46.8 nm against 23 nm at maximum Brillouin pump power of 2 mW and 1480-nm pump power of 130 mW. On the other hand, the bi-directional amplifier configuration provides 13 output channels against 6 output channels obtained from the uni-directional amplifier configuration at the same pumping powers. Nevertheless, the bi-directional amplifier configuration requires much lower pump power to initiate lasing.     

Multi-wavelength Brillouin fiber laser using dual-cavity configuration

A simple technique for achieving multi-wavelength tunable multi-wavelength Brillouin fiber laser (BFL) based on dual-pass configuration is demonstrated. The BFL uses a piece of 10 km long non-zero dispersion shifted fiber (NZ-DSF) as a Brillouin gain medium to obtain odd-order Brillouin Stokes waves as an output with the line spacing of 0.16 nm (20 GHz) between each two consecutive waves by employing even-order Brillouin Stokes to improve output performance of the laser. With a BP of 15.3 dBm, at least 15 odd-order Brillouin Stokes and anti-Stokes lines are generated. The laser is room temperature stable, tunable over 50 nm wavelength range and has an optical signal to noise ratio of more than 30 dB at 1560 nm region. This Brillouin fiber laser can operate at any wavelength depending on the Brillouin pump (BP) wavelength used.     

15波长输出的布里渊掺铒光纤激光器

多波长布里渊掺铒光纤激光器是一种新型的多波长光纤激光器,其原理是利用受激布里渊增益和掺铒光纤的线性增益,可以在常温下得到波长间隔约为0．08nm(～10GHz)的多波长输出。报道的布里渊掺铒光纤激光器,在布里渊抽运功率为1．7mW、980nm抽运功率为300mW的情况下得到稳定的15个波长(间隔～10GHz)的输出,这种激光器用作光传感器、光谱分析仪以及密集波分复用系统的光源。实验发现,输出波长的个数随着980nm抽运功率的增大而增加。另外,布里渊掺铒光纤激光器的信号功率主要来自于掺铒光纤的增益,而布里渊增益对它的影响不大。     

同带抽运高效率光纤放大器

以光纤光栅为谐振腔搭建了波长为1020 nm的光纤激光器,并通过两级级联放大获得了590 mW的最大输出功率. 利用获得的波长为1020 nm的激光进行了波长为1064 nm种子光同带抽运放大,实验研究了不同增益光纤长度时放大器的输出功率和转换效率. 当增益光纤长度为8.5 m时,放大器最大输出功率为385 mW,斜率效率为81%. 进行了波长为976 nm的半导体激光器直接抽运波长为1064 nm种子光的实验. 在增益光纤长度最优时,其斜率效率为56.4%. 实验结果表明,同带抽运方式比传统抽运方式具有更高的转换效率. 研究结果可为波长为1020 nm的激光高功率放大和波长为1064 nm的光纤激光高功率同带抽运放大提供一定的参考. 关键词： 同带抽运 光纤放大器 斜率效率     

Stable double spacing multiwavelength Brillouin-Erbium doped fiber laser based on highly nonlinear fiber

A double frequency spaced multiwavelength Brillouin-Erbium doped fiber laser (BEDFL) with figure-of-eight cavity have been successfully developed and tested. Double frequency spacing is achieved by using a piece of 2 km of highly nonlinear fiber (HNLF) as a gain medium. Figure-of-eight configuration removes the odd order Stokes signals via a four-port circulator. Fifteen Stokes channels are simultaneously generated with a spacing of 0.154 nm that is around 20 GHz, when the Brillouin pump and 980 nm pump powers are fixed at the optimized values of 6 dBm and 40 mW, respectively. Fourteen anti stoke channels are also obtained, which are generated through four wave mixing (FWM) process in the laser cavity. The output is smooth triangular comb. The BEFL can also be tuned from 1526.5 to 1567.5 nm.     

High output power Erbium-Ytterbium doped cladding pumped fiber amplifier

The performance of a high output power Erbium-Ytterbium doped fiber amplifier (EYDFA) pumped by a 927 nm laser diode are proposed and experimentally investigated. The EYDFA provides a flat gain and output power higher than 23 dBm in the wavelength region from 1545 to 1566 nm using a double-pass configuration. A broadband fiber Bragg grating is used in the double-pass EYDFA to allow a double-propagation of the test signal in the gain medium and thus improves the gain and output power characteristics of the amplifier. The maximum output power of 390 mW is obtained at the maximum 927 nm pump power of 4.1 W which translates to a power conversion efficiency of about 10%.     

A novel double-Brillouin-frequency spaced multi-wavelength Brillouin erbium-doped fiber laser based on non-linear amplified fiber loop mirror

In the paper, a ring double-Brillouin-frequency spaced multi-wavelength Brillouin erbium-doped fiber laser based on non-linear amplified fiber loop mirror filter is demonstrated, in which the non-linear amplified fiber loop mirror (AFLMF) is used as a filter. At the 980 nm pump power of 10.29 dBm, the tunable laser source center wavelength of 1563 nm and power of −3 dBm, up to 12 even output channels with 0.16 nm spacing are achieved. At the same time, we study the influence of 980 nm pump power, the polarization controller and the tunable laser source center wavelength on the number of Stokes light wave.     

Dual-wavelength Brillouin ring-cavity fiber laser with tunable channel spacing

We experimentally demonstrate a dual-wavelength Brillouin fiber laser configured a pre-amplified Brillouin pump and FBG filter in a ring-cavity. The Brillouin laser can generate 21 Brillouin Stokes with 0.084 nm spacing, the first-Stoke has a peak power of 2.19 dBm. By adjusting the TLS wavelength and FBG’s reflection wavelength from circulating in the ring-cavity, the generated output dual-wavelength is stabile and the channel spacing is tunable, the widest and narrowest channel spacing obtained is approximately 1.12 nm (139 GHz) and 0.084 nm (10.5 GHz).     

Multi-wavelength Brillouin-Raman ring-cavity fiber laser with 22-GHz spacing

We experimentally demonstrate a multi-wave length Brillouin-Raman fiber laser configured in a ring-cavity resonator. Interactions between stimulated Brillouin scattering and Raman amplification in a dispersion compensating fiber, attributed to the generation of 16 output channels at injected Raman pump unit power of 650 mW and Brillouin pump power of 2.0 mW. The first output channel has a peak power of 14.8 mW. By discriminating the even-order Brillouin Stokes signals from circulating in the resonator, the generated output channels were found to have wavelength spacing of ∼22 GHz. The output channels were also found to have average optical signal-to-noise ratio value of 11.7 dB.     

Tunable multiwavelength Brillouin-erbium ring-cavity fiber laser with short-length photonic crystal fiber

A multi-wavelength Brillouin-erbium ring-cavity fiber laser utilizing 2-m erbium doped fiber (EDF) and 70-m high nonlinear photonic crystal fiber (PCF) is proposed and demonstrated. The output characteristics and also the impacts of pump and Brillouin pump (BP) on the output spectra are investigated in detail. The output number and wavelength location of Brillouin lines are tunable by adjusting the power of 1465 nm pump and BP, and a 5-channel output within 11 nm (1551–1562 nm) tuning range is achieved by choosing appropriate pump power.     

Multiwavelength L-band fiber laser with bismuth-oxide EDF and photonic crystal fiber

A multiwavelength laser comb using a bismuth-based erbium-doped fiber and 50 m photonic crystal fiber is demonstrated in a ring cavity configuration. The fiber laser is solely pumped by a single 1455 nm Raman pump laser to exploit its higher power delivery compared to that of a single-mode laser diode pump. At 264 mW Raman pump power and 1 mW Brillouin pump power, 38 output channels in the L-band have been realized with an optical signal-to-noise ratio above 15 dB and a Stokes line spacing of 0.08 nm. The laser exhibits a tuning range of 12 nm and produces stable Stokes lines across the tuning range between Brillouin pump wavelengths of 1603 nm and 1615 nm.     

Widely tunable linear-cavity multiwavelength fiber laser with distributed Brillouin scattering

We demonstrate a multiple wavelength Brillouin/erbium fiber laser in a linear cavity configuration.The laser cavity is made up of a fiber loop mirror on one end of the resonator and a virtual mirror generated from the distributed stimulated Brillouin scattering effect on the other end.Due to the weak reflectivity provided by the virtual mirror,self-lasing cavity modes are completely suppressed from the laser cavity.At Brillouin pump and 1480-nm pump powers of 2 and 130 mW,respectively,11 channels of the demonstrated laser with an average total power of 7.13 dBm can freely be tuned over a span of 37-nm wavelength from 1530 to 1567 nm.     

Self-excited brillouin–erbium fiber laser for DWDM applications

The operation of the self-excited Brillouin/erbium fiber laser (BEFL) is experimentally demonstrated. It uses a forward pumped erbium-doped fiber (EDF) as a gain medium to generate a Brillouin-pump (BP) and amplify the Stokes frequency signals generated in a single-mode fiber (SMF). The operating wavelength varies with changes of coupling ratio of the looping arm. The optimum BEFL operation is obtained with a center wavelength at 1567.5 nm by looping back 20% of BEFL output into the other end of the SMF. The BEFL output power and number of lines increases gradually as 980-nm pump power increases. At the maximum 980-nm pump power of 118 mW, a stable and strong BEFL comb of up to 16 lines with 11 GHz spacing is demonstrated. The self-excited BEFL has the potential to be used in the future dense wavelength division multiplexing (DWDM) communication system.