Study of adsorption and penetration of E2(279-298) peptide into Langmuir phospholipid monolayers

The peptide corresponding to the sequence (279-298) of the Hepatitis G virus (HGV/GBV-C) E2 protein was synthesized, and surface activity measurements, pi-A compression isotherms, and penetration of E2(279-298) into phospholipid monolayers spread at the air-water interface were carried out on water and phosphate buffer subphases. The results obtained indicated that the pure E2(279-298) Langmuir monolayer exhibited a looser packing on saline-buffered than on pure water subphase and suggest that the increase in subphase ionic strength stabilizes the peptide monolayer. To better understand the topography of the monolayer, Brewster angle microscopy (BAM) images of pure peptide monolayers were obtained. Penetration of the peptide into the pure lipid monolayers of dipalmitoylphosphatidylcholine (DPPC) and dimyristoylphosphatidylcholine (DMPC) and into mixtures of dimyristoylphosphatidylcholine/dimyristoylphosphatidylglycerol (DMPC/DMPG) at various initial surface pressures was investigated to determine the ability of these lipid monolayers to host the peptide. The higher penetration of peptide into phospholipids is attained when the monolayers are in the liquid expanded state, and the greater interaction is observed with DMPC. Furthermore, the penetration of the peptide dissolved in the subphase into these various lipid monolayers was investigated to understand the interactions between the peptide and the lipid at the air-water interface. The results obtained showed that the lipid acyl chain length is an important parameter to be taken into consideration in the study of peptide-lipid interactions.     

Interaction of the cationic peptide bactenecin with mixed phospholipid monolayers at the air-water interface

The initial mechanism by which antimicrobial peptides target microbes occurs via electrostatic interactions; however, the mechanism is not well understood. We investigate the interaction of the antimicrobial peptide bactenecin with a 50:50 w:w% 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) and 1,2-dimyristoyl-sn-glycero-3-phospho-(1'-rac-glycerol) (DMPG) phospholipid mixture at the air-water interface with different NaCl concentrations (0.01, 0.05, 0.1, 0.5 M) in the subphase. A larger shift of DPPC:DMPG isotherms was obtained for 0.1 M salt concentration at lower and higher pressures, demonstrating the influence of the negative charge of DMPG molecules and the screening of the electrostatic interaction by the salt concentration. Raman spectroscopy of monolayers demonstrated the presence of cysteine-cysteine bridges in bactenecin loops. The peptide adsorption in DPPC:DMPG monolayers observed by AFM images suggests a self-assembled aggregation process, starting with filament-like networks. Domains similar to carpets were formed and pore structures were obtained after a critical peptide concentration, according to the carpet model.     

The controlling effect of pH on oxidation of Cr(III) by manganese oxide minerals

Effects of the subphase temperature on the surface pressure (pi)-area (A) isotherms of mixed monolayers of miltefosine (hexadecylphosphocholine), a potential anticancer drug, and cholesterol were investigated at the air/water interface, which were supplemented with Brewster angle microscopy (BAM) observations. Comparison of the collapse pressure values, mean molecular areas, excess areas and excess free energy of mixing between the mixed monolayer at various molar ratios and the pure component monolayers showed that, regardless of the subphase temperature, the investigated miltefosine-cholesterol system is much more stable than that the pure component monolayers, suggesting strong attractive interactions between miltefosine and cholesterol in mixed monolayers. As a consequence, it was postulated that stable "complexes" of the two components could form at the interface, for which stoichiometry may vary with the subphase temperature. Such "surface complexes" should be responsible for the contraction of the mean molecular area and thus the high stability of the mixed monolayer.     

Stabilization of phospholipid multilayers at the air-water interface by compression beyond the collapse: a BAM, PM-IRRAS, and molecular dynamics study

Compression beyond the collapse of phospholipid monolayers on a modified Langmuir trough has revealed the formation of stable multilayers at the air-water interface. Those systems are relevant new models for studying the properties of biological membranes and for understanding the nature of interactions between membranes and peptides or proteins. The collapse of 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC), 1,2-di[cis-9-octadecenoyl]-sn-glycero-3-[phospho-l-serine] (DOPS), 1,2-di[cis-9-octadecenoyl]-sn-glycero-3-phosphocholine (DOPC), and 1,2-di[cis-9-octadecenoyl]-sn-glycero-3-[phospho-1-rac-glycerol] (DOPG) monolayers has been investigated by isotherm measurements, Brewster angle microscopy (BAM), and polarization modulation infrared reflection-absorption spectroscopy (PM-IRRAS). In the cases of DMPC and DOPS, the collapse of the monolayers revealed the formation of bilayer and trilayer structures, respectively. The DMPC bilayer stability has been analyzed also by a molecular dynamics study. The collapse of the DOPC and DOPG systems shows a different behavior, and the Brewster angle microscopy reveals the formation of luminous bundles, which can be interpreted as diving multilayers in the subphase.     

Phase dependent electrochemical properties of polar self-assembled monolayers (SAMs) modified via the fusion of mixed phospholipid vesicles

Unilamellar vesicles of 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) and varying quantities of either 1,2-dimyristoyl-sn-glycero-3-[phospho-rac-(1-glycerol) (sodium salt) (DMPG) or 1,2-dimyristoyl-3-trimethylammonium-propane (chloride salt) (DMTAP) were used to deposit lipid bilayer assemblies on self-assembled monolayers (SAMs) on gold. The supporting SAMs in turn were composed of ferrocene-functionalized hexadecanethiol chains (FcC16SH) diluted to low coverage in 1-hydroxylhexadecanethiol (HOC16SH) or a single-component monolayer phase of the latter. The mass coverages of the DMPC/DMPG layers deposited in this way were measured using surface plasmon resonance (SPR) and found to decrease with an increasing content of DMPG in the vesicles. The SPR data show that the lipid assembly, while stable with respect to gentle rinsing in aqueous buffer, is reversible and the lipid adlayer is removable by immersion in a solvent such as ethanol. The effects of the adsorbed lipid layer on the electrochemical interactions of the hybrid lipid/SAM with several redox probes [e.g., K4Fe(CN)6, Ru(NH3)6Cl3, and CsHsFe-[(C5H4CH2N+H(CH3)2] were characterized using cyclic voltammetry (CV). At a composition of 5% DMPG in DMPC, the permeabilities of the probes through the lipid layer were affected significantly relative to that observed with a pure DMPC layer. These effects include a striking observation of an enhanced, ionic-charge-specific molecular discrimination of the electrochemical probes. At higher concentrations of the DMPG, significant permeation of the lipid adlayer was seen for all the probes. These latter changes are also attended by a significant increase in the capacitive currents measured in CV experiments as compared to those observed for either a pure SAM or one modified by only DMPC. This effect likely results from the influence of the charged lipid on the diffuse Gouy-Chapman electrolyte layer at the SAM interface. In contrast to the behaviors seen with DMPG, the incorporation of DMTAP into the adsorbed DMPC had no impact on the permeation of the adlayer by soluble redox probes as judged by the observed electrochemistry, a result that appears to correlate with a less ideal mixing of lipids in the DMPC/DMTAP system relative to that of a DMPC/DMPG mixture.     

Interaction of the glycoalkaloid tomatine with DMPC and sterol monolayers studied by surface pressure measurements and Brewster angle microscopy

The interaction of the glycoalkaloid tomatine with monolayers of dimyristoylphosphatidylcholine (DMPC) and cholesterol, as well as other selected sterols, has been investigated using surface pressure measurements at constant area and Brewster angle microscopy (BAM). The interaction of tomatine with sterol monolayers is found to vary with the structure of the sterol. The interaction of tomatine with cholesterol-containing monolayers results in a surface pressure increase accompanied by the appearance of a mottled texture. Morphological changes are observed that suggest the formation of tomatine-cholesterol complexes that aggregate at the water-air interface. No morphology change observable by BAM is observed for monolayers containing epicholesterol, suggesting that the stereochemistry of hydrogen bonding between the sterol and the sugar units on tomatine is of particular significance. Strong interactions are observed with cholestanol- and coprostanol-containing monolayers, and BAM reveals formation of spiked aggregates upon interaction with 7:3 mole ratio DMPC/coprostanol mixed monolayers. More modest surface pressure changes are observed for cholestenone- and epicoprostanol-containing monolayers. A much smaller surface pressure increase is observed when tomatine is injected beneath a pure DMPC monolayer.     

Local control of antibody binding to hapten-presenting interfaces: Steric and electrostatic interaction

The binding of labeled antibodies to hapten substituted monolayers at the air/water interface has been studied by means of fluorescence microscopy. Haptens with various spacer lengths between the epitope and a hydrocarbon chain, anchoring the molecule to the interface, have been synthesized. With DMPC,^a unspecific binding has been shown to predominate over specific binding due to electrostatic interactions. At high surface pressures the bound antibody is detached because of steric interference with the lipid head groups. Due to a reduction of electrostatic interactions, no unspecific binding is observed to monolayers of cholesterol, which carries a small dipole moment. Mixed monolayers of cholesterol and DMPC separate into two fluid phases, with preferential antibody binding to the cholesterol-enriched phase.     

Effects of Calcium Ions on Thermodynamic Properties of Mixed Bilirubin/Cholesterol Monolayers

The mixed monolayer behavior of bilirubin/cholesterol was studied through surface pressure-area (?-A) isotherms on aqueous solutions containing various concentrations of calcium ions. Based on the data of ?-A isotherms, the mean area per molecule, collapse pressure, surface compressibility modulus, excess molecular areas, free energy of mixing, and excess free energy of mixing of the monolayers on different subphases were calculated. The results show an expansion in the structure of the mixed monolayer with Ca2+ in subphase, and non-ideal mixing of the components at the air/water interface is observed with positive deviation from the additivity rule in the excess molecular areas. The miscibility between the components is weakened with the increase of concentration of Ca2+ in subphase. The facts indicate the presence of coordination between Ca2+ and the two components. The mixed monolayer, in which the molar ratio of bilirubin to cholesterol is 3:2, is more stable from a thermodynamic point of view on pure water. But the stable 3:2 stoichiometry complex is destroyed with the increase of the concentration of Ca2+ in subphase. Otherwise, the mixed monolayers have more thermodynamic stability at lower surface pressure on Ca2+ subphase.     

Interfacial organizations of gel phospholipid and cholesterol in bovine lung surfactant films

Pulmonary surfactants stabilize the lung by way of reducing surface tension at the air-lung interface of the alveolus. 31P NMR, thin-layer chromatography, and electrospray ionization mass spectroscopy of bovine lipid extract surfactant (BLES) confirmed dipalmitoylphosphatidylcholine (DPPC) to be the major phospholipid species, with significant amounts of palmitoyl-oleoylphosphatidylcholine, palmitoyl-myristoylphosphatidylcholine, and palmitoyl-oleoylphosphatidylglycerol. BLES and DPPC spread at the air-water interface were studied through surface pressure area, fluorescence, and Brewster angle microscopy measurements. Langmuir-Blodgett films of monomolecular films, deposited on mica, were characterized by atomic force microscopy. BLES films displayed shape, size, and vertical height profiles distinct from those of DPPC alone. Calcium ions in the subphase altered BLES film domain structure. The addition of cholesterol (4 mol %) resulted in the destabilization of compressed BLES films at higher surface pressures (>40 mN m-1) and the formation of multilayered structures, apparently consisting of stacked monolayers. The studies suggested potential roles for individual surfactant lipid components in supramolecular arrangements, which could be the contributing factors in pulmonary surfactant to attain low surface tension at the air-water interface.     

Interfacial properties of a synthetic peptide derived from hepatitis G virus E2 protein: interaction with lipid monolayers

A useful approach to get information about the potential fusogenic ability of virus synthetic peptides is the study of its interfacial properties and subsequent study in mono- and bilayers. In this work, we have characterized by means of physicochemical tools (i.e. compression isotherms and surface activity) the sequence 267-284, LLGTEVSEVLGGAGLTGG, derived from the E2 structural protein of HGV/GBV-C. The adsorption of the peptide at the air/water interface was monitored by following the increase in surface pressure as a function of time at two different pH values: 5 and 7. Parameters such as surface excess or molecular area were calculated from the equation of Gibbs. The peptide showed a tendency to migrate to the surface of a saline-buffered solution. It formed stable monolayers at the air/water interface giving a compression isotherm with a shape consistent with that of some alpha-helical peptide conformations. Brewster angle microscopy (BAM) showed that through compression the peptide formed multilayers. The studies with lipid monolayers (DPMC, DMPC/DMPG, and DMPC/DMTAP) showed that the peptide interacts with all the lipids assayed producing a marked disrupting effect upon them. In these effects electrostatic interactions seem to have some participation.     

Molecular organization, structural orientation, and surface topography of monoacylated beta-cyclodextrins in monolayers at the air-aqueous interface

The surface behavior of monoacylated beta-cyclodextrins, with hydrocarbon chains of 16, 14, and 10 carbons, has been assessed by the measurement of the surface pressure, surface (dipole) potential, optical reflectivity, and surface topography in monolayers at the air-water interface. For all the derivatives studied, the intermolecular organization adopted along compression-decompression isotherms reveals a rich variety of packing states which imply profound reorganization of the hydrophobic and hydrophilic moieties of the beta-cyclodextrin derivatives in the film, depending on the lateral surface pressure. The intermolecular arrangements are consistent with the adoption of a different and defined orientation of the cyclic oligosaccharide unit, relative to the interfacial plane and the aqueous subphase. This is different from the behavior of the per-substituted derivatives, and none of the changes exhibited by the monosubstituted forms are consistent with the oligosaccharide ring remaining in a fixed orientation along the interface when the surface pressure is varied.     

Interaction of the neurotransmitter, neuropeptide Y, with phospholipid membranes: infrared spectroscopic characterization at the air/water interface

The association of neuropeptide Y (NPY) at the air/water interface and with phospholipid monolayers on water as subphase has been investigated using external infrared reflection absorption spectroscopy (IRRAS). Studies of the conformation and orientation of NPY suggest that it adopts an alpha-helical structure and is oriented parallel to the air/water interface in neat peptide monolayers. Both secondary structure and orientation are preserved in mixed lipid/NPY monolayers. Comparison of NPY associated with zwitterionic DPPC and with anionic DMPS suggests that electrostatic attraction plays a major role for peptide binding to the membrane surface.     

Comparison of the interaction of dihydrocholesterol and cholesterol with sphingolipid or phospholipid Langmuir monolayers

We report here a study of the interaction of dihydrocholesterol (DChol) with palmitoyl-oleoyl-phosphatidylcholine (POPC) or sphingomyelin (SM) in Langmuir monolayers. DChol and cholesterol (Chol) have very close chemical structures, and DChol is often used in place of Chol because of its better stability. Surface pressure measurements and experiments of desorption induced by beta-cyclodextrin show that POPC-DChol monolayers behave similarly to POPC-Chol ones: condensing effects of DChol and Chol on POPC and desorption percentages are in the same range. Moreover Brewster angle microscopy (BAM) experiments performed on these monolayers show that on the whole they are both homogenous. The analysis of mean molecular areas versus DChol percentage shows that this sterol is also able to induce SM condensation at low surface pressure. The condensation of SM molecules is particularly strong at 30 mol% of DChol. At higher surface pressure, the condensation efficiency of DChol decreases and monolayers behave more ideally, even if an inflection point is always observed at 30 mol% of DChol. However, desorption percentages, clearly lower than those obtained with POPC-DChol monolayers, show that DChol is kept at the interface. At last BAM images show also differences in the behaviour of SM-DChol and SM-Chol monolayers. These differences could be due to the different compressibility and conformation of the A/B rings in the two sterols and the rigidity of the sphingosine chain. They suggest that the use of DChol in place of Chol has to be done carefully in the presence of SM.     

Maxwell displacement current allows to study structural changes of gramicidin A in monolayers at the air-water interface

We applied methods of measurement Maxwell displacement current (MDC) pressure-area isotherms and dipole potential for analysis of the properties of gramicidin A (gA) and mixed gA/DMPC monolayers at an air-water interface. The MDC method allowed us to observe the kinetics of formation of secondary structure of gA in monolayers at an air-water interface. We showed, that secondary structure starts to form at rather low area per molecule at which gA monolayers are in gaseous state. Changes of the MDC during compression can be attributed to the reorientation of dipole moments in a gA double helix at area 7 nm(2)/molecule, followed by the formation of intertwined double helix of gA. The properties of gA in mixed monolayers depend on the molar fraction of gA/DMPC. At higher molar fractions of gA (around 0.5) the shape of the changes of dipole moment of mixed monolayer was similar to that for pure gA. The analysis of excess free energy in a gel (18( ) degrees C) and in a liquid-crystalline phase (28( ) degrees C) allowed us to show influence of the monolayer structural state on the interaction between gA and the phospholipids. In a gel state and at the gA/DMPC molar ratio below 0.17 the aggregates of gA were formed, while above this molar ratio gA interacts favorably with DMPC. In contrast, for DMPC in a liquid-crystalline state aggregation of gA was observed for all molar fractions studied. The effect of formation ordered structures between gA and DMPC is more pronounced at low temperatures.     

STM studies of fusion of cholesterol suspensions and mixed 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC)/cholesterol vesicles onto a Au(111) electrode surface

Electrochemical scanning tunneling microscopy (EC-STM) has been applied to study the structure of the film formed by fusion of cholesterol suspensions and mixed dimyristoylphosphatidylcholine (DMPC)/cholesterol vesicles on a Au(111) electrode surface. It has been demonstrated that cholesterol molecules assemble at the gold support into several structures templated by the crystallography of the metal surface and involving flat or edge-on adsorbed molecules. Studies of the film formed by fusion of mixed DMPC/cholesterol vesicles revealed that ordered domains of either pure DMPC or pure cholesterol were formed. These results indicate that, at the metal surface, the molecules released by the rupture of a vesicle initially self-assemble into a well-ordered monolayer. The self-assembly is controlled by the hydrocarbon skeleton-metal surface interaction. In the case of mixed DMPC/cholesterol vesicles, the molecule-metal interactions induce segregation of the two components into single component domains. However, the molecule-metal interaction induced monolayer is a transient phenomenon. When more molecules accumulate at the surface, the molecule-molecule interactions dominate the assembly, and the monolayer is transformed into a bilayer.     

Stereoselective interactions of a specialized antibody with cholesterol and epicholesterol monolayers

The stereoselective recognition by monoclonal antibodies of two-dimensional monolayers of cholesterol spread at the air-water interface is presented. Using immunofluorescence, we show that one antibody, raised and selected against crystals of cholesterol monohydrate, specifically recognizes monolayers of cholesterol, but not monolayers of epicholesterol--its epimeric form. This demonstrates that stereoselective recognition also applies to protein-surface interactions.     

Effect of bovine serum albumin on the structure and properties of Langmuir Blodgett films based phosphocholine and cholesterol

Mono- and bilayer Langmuir-Blodgett films based on phosphocholine and cholesterol and prepared by horizontal and vertical deposition are investigated by atomic force microscopy. It was found that bovine serum albumin (BSA) included at the stage of film formation. At the same time, isolation has a considerable effect on their structure. It was shown that the globular formation of nanostructures with heights of 4–7 nm occurs as a result of transferring lipids to a hydrophobic surface from a subphase containing BSA, indicating the reorganization of monolayers during protein isolation and inclusion in its composition.     

Structural Phase Behavior of High-Concentration,Alignable Biomimetic Bicelle Mixtures

The structures of bicelle mixtures composed of dimyristoyl and dihexanoyl phosphatidylcholines (DMPC and DHPC) with DMPC/DHPC molar ratios of 3.2 and 5 are characterized using polarized optical microscopy (POM) and small angle neutron scattering (SANS). Three phases, isotropic (I), chiral nematic (N^*) and smectic (S) are observed as temperature (T) varies from 10 to 70 °C. The structure of the magnetically alignable N^* phase, which was previously considered to be made up of discoidal micelles, is found to be composed of “ribbons”. Doping with the charged lipid, dimyristoyl phosphatidylglycerol (DMPG), which has the same 14:0 hydrocarbon chains as DMPC, results in a structural change of the aggregates where only the isotropic and smectic phases are observed. The smectic phase for the mixtures doped with DMPG is shear-alignable and follows one-dimensional swelling. However, at high-T zwitterionic DMPC/DHPC mixtures form multi-lamellar vesicles (MLV) with a relatively constant lamellar spacing of 66 Å, independent of water content.     

Equilibrium structure and dynamics of (2R, 3R)-(+)-bis(decyloxy)succinic acid at the air-water interface

A twin-tailed, twin-chiral fatty acid, (2R,3R)-(+)-bis(decyloxy)succinic acid was synthesized and its two dimensional behavior at the air-water interface was examined. The pH of the subphase had a profound effect on the monolayer formation. On acidic subphase, stable monolayers with increased area per molecule due to hydrogen bonding and bilayers at collapse pressures were observed. Highly compressible films were formed at 40 degrees C, while stable monolayers with increased area were observed at sub-room temperatures. Langmuir monolayers formed on subphases containing 1 mM ZnCl2 and CaCl2 revealed two dimensional metal complex formation with Zn2+ forming a chelate-type complex, while Ca2+ formed an ionic-type complex. Monolayers transferred from the condensed phase onto hydrophilic Si(100) and quartz substrates revealed the formation of bilayers through transfer-induced monolayer buckling. Compression induced crystallites in 2D from monolayers and vesicle-like supramolecular structures from multilayers were the noted LB film characteristics, adopting optical imaging and electron microscopy. The interfacial monolayer structure studied through molecular dynamics simulation revealed the order and packing at a molecular level; monolayers adsorbed at various simulated specific areas of the molecule corroborated the (pi-A) isotherm and the formation of a hexagonal lattice at the air-water interface.     

Interactions of Pluronics with phospholipid monolayers at the air-water interface

Pluronics are triblock copolymers which are extensively applied excipients shown to interact with cell membranes. The aim of our study was to apply monolayer techniques and epifluorescence microscopy to investigate the interaction behavior between selected Pluronics and phospholipid monolayers which serve as a model of cell membranes. The results showed that Pluronic L61 with hydrophobic proportions much larger than those of F68 demonstrated condensed film-like surface behavior while F68 exhibited more expanded behavior. The increments of surface pressure and the changes of image were more obvious in adding Pluronic L61 than F68 to the subphase of dipalmitoylphosphatidylcholine (DPPC) monolayers, which indicated that the interaction may be related to van der Waals forces and hydrophobic interaction. Pluronics selected with higher hydrophobicities demonstrated larger surface activities and penetration abilities while being added to the subphase of DPPC and dimyristoylphosphatidylcholine (DMPC) monolayers. Pluronic P85 and F68 were found to be squeezed to subphase at higher surface pressures, which may be attributed to their relatively higher hydrophilicities.