A green route is designed to gain a clear idea of growth mechanism of complex VO2 (B) hierarchical microstructures, since this kind of metal oxide has various metastable phases due to their diverse valence states. Three‐dimensional (3D) uniform flower‐like VO2 (B) hierarchical microstructure has thus been assembled with the interleaving nanoplates, which are about 25 nm in thickness and well‐crystallized in structure with {114} planes as the dominant surfaces. Results of the systemic control experiments revealed that formation of the flower‐like VO2 (B) results from a fast nucleation‐growth process, where ethylene glycol (EG) not only acts as a green solvent and reductive agent, but also plays a key role in self‐assembly of the resulted VO2 (B) hierarchical microstructures. Hydroxyl amount on the solvent molecule is crucial in formation and shape control of VO2 (B) hierarchical microstructures. Result of this work would be helpful to understand the growth mechanism of complex three‐dimensional hierarchical superstructures of different metal oxides, which is very important to material science and inorganic synthetic chemistry. 相似文献
Polymorphism control of PVDF has been realized through electrospinning. PVDF fibrous membranes with fiber diameter in the range of 100 nm to several micrometers were produced by electrospinning and the crystal phase of electrospun PVDF fibers can be adjusted at the same time. Through the control of electrospinning parameters such as the solvent, electrospinning temperature, feeding rate, and tip‐to‐collector distance, PVDF fibrous membranes containing mainly α‐ or β‐ or γ‐phase could be fabricated successfully.
Analysis of variable-temperature fluorescence quantum yield and lifetime data for per(difluoroboro)tetrakis(pyrophosphito)diplatinate(II) ([Pt(2)(μ-P(2)O(5)(BF(2))(2))(4)](4-), abbreviated Pt(pop-BF(2))), yields a radiative decay rate (k(r) = 1.7 × 10(8) s(-1)) an order of magnitude greater than that of the parent complex, Pt(pop). Its temperature-independent and activated intersystem crossing (ISC) pathways are at least 18 and 142 times slower than those of Pt(pop) [ISC activation energies: 2230 cm(-1) for Pt(pop-BF(2)); 1190 cm(-1) for Pt(pop)]. The slowdown in the temperature-independent ISC channel is attributed to two factors: (1) reduced spin-orbit coupling between the (1)A(2u) state and the mediating triplet(s), owing to increases of LMCT energies relative to the excited singlet; and (2) diminished access to solvent, which for Pt(pop) facilitates dissipation of the excess energy into solvent vibrational modes. The dramatic increase in E(a) is attributed to increased P-O-P framework rigidity, which impedes symmetry-lowering distortions, in particular asymmetric vibrations in the Pt(2)(P-O-P)(4) core that would allow direct (1)A(2u)-(3)A(2u) spin-orbit coupling. 相似文献
Exerting morphological control over metal-organic frameworks (MOFs) is critical for determining their catalytic performance and to optimize their packing behavior in areas from separations to fuel gas storage. A mechanism-based approach to tailor the morphology of MOFs is introduced and experimentally demonstrated for five cubic Zn4O-based MOFs. This methodology provides three key features: 1) computational screening for selection of appropriate additives to change crystal morphology based on knowledge of the crystal structure alone; 2) use of additive to metal cluster geometric relationships to achieve morphologies expressing desired crystallographic facets; 3) potential for suppression of interpenetration for certain phases. 相似文献
The substitution of Ga(3+) into the Jahn--Teller distorted, antiferromagnetic perovskites LaMnO(3) and NdMnO(3) strongly affects both the crystal structures and resulting magnetic ordering. In both compounds the Ga(3+) and Mn(3+) cations are disordered over the six coordinate sites. La(2)GaMnO(6) is a ferromagnetic insulator (T(c) = 70 K); a moment per Mn cation of 2.08(5) mu(B) has been determined by neutron powder diffraction at 5 K. Bond length and displacement parameter data suggest Jahn--Teller distortions which are both coherent and incoherent with the Pnma space group symmetry of the perovskite structure (a = 5.51122(4) A, b = 7.80515(6) A, c = 5.52947(4) A) at room temperature. The coherent distortion is strongly suppressed in comparison with the parent LaMnO(3) phase, but the displacement ellipsoids suggest that incoherent distortions are significant and arise from local Jahn--Teller distortions. The preparation of the new phase Nd(2)GaMnO(6) has been found to depend on sample cooling rates, with detailed characterization necessary to ensure phase separation has been avoided. This compound also adopts the GdFeO(3)-type orthorhombically distorted perovskite structure (space group Pnma, a = 5.64876(1) A, b = 7.65212(2) A, c = 5.41943(1) A at room temperature). However, the B site substitution has a totally different effect on the Jahn--Teller distortion at the Mn(3+) centers. This phase exhibits a Q(2) mode Jahn--Teller distortion similar to that observed in LaMnO(3), although reduced in magnitude as a result of the introduction of Ga(3+) onto the B site. There is no evidence of a dynamic Jahn-Teller distortion. At 5 K a ferromagnetically ordered Nd(3+) moment of 1.06(6) mu(B) is aligned along the y-axis and a moment of 2.8(1) mu(B) per Mn(3+) is ordered in the xy plane making an angle of 29(2) degrees with the y-axis. The Mn(3+) moments couple ferromagnetically in the xz plane. However, along the y-axis the moments couple ferromagnetically while the x components are coupled antiferromagnetically. This results in a canted antiferromagnetic arrangement in which the dominant exchange is ferromagnetic. Nd(2)GaMnO(6) is paramagnetic above 40(5) K, with a paramagnetic moment and Weiss constant of 6.70(2) mu(B) and 45.9(4) K, respectively. An ordered moment of 6.08(3) mu(B) per Nd(2)GaMnO(6) formula unit was measured by magnetometry at 5 K in an applied magnetic field of 5 T. 相似文献
The efficient synthesis of new asymmetric poly(phenylenevinylene) dendritic macromolecules using a stepwise convergent-growth approach is described. By an iterative methodology that made use of the Horner-Wadsworth-Emmons (HWE) reaction, dendrons and dendrimers up to the third generation, with eight different functional groups located at the periphery, were prepared in good yields. Both the number and placement of functionalities can be accurately controlled to afford a large variety of dendritic architectures. 相似文献
