Influence of the p-type doping on the radiometric performances of MWIR InAs/GaSb superlattice photodiodes

In this paper, quantum efficiency (QE) measurements performed on type-II InAs/GaSb superlattice (T2SL) photodiodes operating in the mid-wavelength infrared domain, are reported. Several comparisons were made in order to determine the SL structure showing optimum radiometric performances: same InAs-rich SL structure with different active zone thicknesses (from 0.5 μm to 4 μm) and different active zone doping (n-type versus p-type), same 1 μm thick p-type active zone doping with different SL designs (InAs-rich versus GaSb-rich and symmetric SL structures). Best result was obtained for the p-type doped InAs-rich SL photodiode, with a 4 μm active zone thickness, showing a QE that reaches 61% at λ = 2 μm and 0 V bias voltage.     

Scanning tunneling microscopy at multiple voltage biases of stable “ring-like” Ag clusters on Si(111)–(7 × 7)

Since more than twenty years it is known that deposition of Ag onto Si(111)–(7 × 7) leads under certain conditions to the formation of so-called “ring-like” clusters, that are particularly stable among small clusters. In order to resolve their still unknown atomic structure, we performed voltage dependent scanning tunneling microscopy (STM) measurements providing interesting information about the electronic properties of clusters which are linked with their atomic structure. Based on a structural model of Au cluster on Si(111)–(7 × 7) and our STM images, we propose an atomic arrangement for the two most stable Ag “ring-like” clusters.     

Peculiarities of Al magic cluster self-assembly on Si(1 0 0) surface

Using scanning tunneling microscopy observations and density functional theory calculations, regularities of the Al magic cluster array self-assembly on Si(1 0 0) surface has been elucidated. While a single Al cluster occupies an area of 4a × 3a, an ordered Al-cluster array exhibits a 4 × 5 periodicity, as the clusters in the array are separated by the 4a × 2a “spacers”. The plausible structural model for the “spacer” was proposed in which the “spacer” is arranged as an ordinary 4a × 3a-Al cluster in which the central atomic row with the topmost Si atom is missing. Appearance of the “spacers” in the Al-cluster array was found to reduce formation energy of the array. Ability to incorporate the rows of Al-“spacers” into the completed 4 × 3 In-cluster array was demonstrated.     

Mid-wavelength type II InAs/GaSb superlattice infrared focal plane arrays

We have demonstrated 384 × 288 pixels mid-wavelength infrared focal plane arrays (FPA) using type II InAs/GaSb superlattice (T2SL) photodetectors with pitch of 25 μm. Two p-i-n T2SL samples were grown by molecular beam epitaxy with both GaAs-like and InSb-like interface. The diode chips were realized by pixel isolation with both dry etching and wet etching method, and passivation with SiN_x layer. The device one with 50% cutoff wavelength of 4.1 μm shows NETD ∼ 18 mK from 77 K to 100 K. The NETD of the other device with 50% cutoff wavelength at 5.6 μm is 10 mK at 77 K. Finally, the T2SL FPA shows high quality imaging capability at the temperature ranging from 80 K to 100 K which demonstrates the devices’ good temperature performance.     

A two-dimensional alloy of immiscible Bi and Sn atoms on Rh(111)

We studied the atomic arrangements and the phase diagram of two-dimensional (2D) Bi–Sn binary films on Rh(111) with low-energy electron diffraction and scanning tunneling microscopy (STM). The 2D binary films exhibited (“2” × √3)-(Bi,Sn), (√7 × √7)R19°-(Bi,Sn), and (7 × 3√3)-(Bi,Sn) structures, depending on the compositional ratio of Bi and Sn. Atomically resolved STM images revealed that the binary films formed a BiSn₃ ordered alloy for the (√7 × √7)R19°-(Bi,Sn) structure and a solid solution alloy for the (“2” × √3)-(Bi,Sn) structure. The atomic configuration for the (7 × 3√3)-(Bi,Sn) structure was closely related to that of (√7 × √7) R19°-(Bi,Sn).     

Improving the performance of a far-infrared quantum-ring-based photodetector utilizing asymmetric multi-barrier resonant tunneling

In this paper, a novel structure for quantum ring inter-subband photodetectors (QRIP) is proposed to reduce its dark current. Some additional layers including asymmetric multi-barrier resonant tunneling (AMBRT) in absorption region layers are exploited to provide near unity tunneling probability for generated photocurrents and completely reject thermally generated electrons. AMBRT structure consists of three asymmetric AlGaAs barriers and two InGaAs wells which are designed for operation wavelength of generated photocurrents by absorption of 20 μm. Simulation results show that AMBRT can considerably reduce the dark current compared to previously proposed resonant tunneling structure about three orders of magnitude. As a consequent, higher specific detectivity for AMBRT-QRIP is obtained in the order of ∼10¹¹ cm Hz^1/2/W at 100 K.     

Synthesis and evaluation of TiN–WC/TiN nanocomposite by the hybrid technique with arc ion plating and magnetron sputtering

By adjusting the power of WC target, novel TiN–WC films with different proportions of WC phase were prepared on TiN interlayer using the hybrid technique of arc ion plating (AIP) and magnetron sputtering (MS). The TiN–WC films were characterized by XRD, XPS, AFM, FESEM, Nano-indenter, and UMT-2MT tribometer. The TiN–WC film that is composed with TiN and WC phases was grown by 15–25 nm nanodotes along the primarily growth direction TiN (1 1 1) in AIP interlayer. Among the three TiN–WC films deposited at various powers of WC target, the TiN–WC2 (500 W) has the highest deposition rate of 1.4 nm/min. The content of WC phase increases as WC target power increases in the TiN–WC films. However, the deposition rate of TiN–WC film gains at first and then declines when WC target power exceeds 500 W because of the addictive poisoning of Ti target. In the present case, the incorporation of WC into TiN is found to result in a slight decrease in friction coefficient. Furthermore, the wear mechanism of multilayer AIP TiN films and MS TiN–WC/AIP TiN films was transformed from “severe wear” to “mild wear”. As a result, the 48TiN52WC film of 35 GPa hardness exhibits better tribological performance.     

The magnetization processes,spin reorientation transitions and magnetic domain structure in DyFe10CoTi single crystal

The tetragonal ThMn₁₂-type, single crystalline DyFe₁₀CoTi sample has been investigated by torque and magnetization measurements and observation of domain structure at various temperatures between 10–300 K and in magnetic field from B=0 to 0.15 T. These examinations showed that the magnetic structure of DyFe₁₀CoTi changes from “easy axis” (c-axis) type to conical at 225 K and to “easy plane” (ab plane) type at 100 K.     

Application of self-collimated beams to realization of all optical photonic crystal encoder

In this paper a 4×2 optical encoder is proposed by employing the self-collimation effect in 2D photonic crystals. The total structure of the proposed device is a combination of so called “beam splitters” and “mirrors”. The simulation result indicates that, this design can operate as 4×2 optical encoder, the footprint of structure is about 69 µm×55 µm and response time is about 1.4 ps.     

A new method for characterization of thermal properties of human enamel and dentine: Influence of microstructure

For better selection of “tooth-like” dental restorative materials, it is of great importance to evaluate the thermal properties of the human tooth. A simple method capable of non-destructively characterizing the thermal properties of the individual layers (dentine and enamel) of human tooth is presented. The traditional method of monotonic heating regime was combined with infrared thermography to measure the thermal diffusivities of enamel and dentine layers without physically separating them, with 4.08 (±0.178) × 10⁷ m²/s measured for enamel and 2.01 (±0.050) × 10⁷ m²/s for dentine. Correspondingly, the thermal conductivity was calculated to be 0.81 W/mK (enamel) and 0.48 W/mK (dentine). To examine the dependence of thermal conductivity on the configuration of dentine microstructure (microtubules), the Maxwell-Eucken and Parallel models of effective thermal conductivity are employed. The effective thermal conductivity of dentine in the direction parallel to tubules was found to be about 1.1 times higher than that perpendicular to the tubules, indicating weak anisotropy. By adopting the Series model, the bulk thermal conductivity of enamel and dentine layers is estimated to be 0.57 W/mK.     

Enhanced OH radical generation by dual-frequency ultrasound with TiO2 nanoparticles: Its application to targeted sonodynamic therapy

The present study demonstrated the enhanced hydroxyl (OH) radical generation by combined use of dual-frequency (0.5 MHz and 1 MHz) ultrasound (US) and titanium dioxide (TiO₂) nanoparticles (NPs) as sonocatalyst. The OH radical generation became the maximum, when 0.5 MHz US was irradiated at an intensity of 0.8 W/cm² and 1 MHz US was irradiated at intensities at 0.4 W/cm² in the presence of TiO₂ NPs under the examined conditions. After incorporation of TiO₂ NPs modified with targeting protein pre-S1/S2, HepG2 cancer cells were subjected to the dual-frequency US at optimum irradiation intensities (“targeted-TiO₂/dual-US treatment”). Growth of the HepG2 cells was reduced by 46% compared with the control condition after irradiation of dual-frequency US for 60 s with TiO₂ NPs incorporation. In contrast, HepG2 cell growth was almost the same as that in the control condition when cells were irradiated with either 0.5 MHz or 1 MHz ultrasound alone without TiO₂ NP incorporation.     

Atomic and electronic structures of Ag/Si(100)-c(6 × 2) surface: A first-principles study

Using the experimental data obtained mainly with the scanning tunneling microscopy observations, density functional theory calculations have been applied to examine an atomic structure of the Ag/Si(100)-c(6 × 2) reconstruction. A set of structural models has been proposed having a similar Si(100) substrate reconstruction which incorporates rows of top Si atom dimers and troughs in between the rows. Stability of about twenty models with various Ag coverage ranging from 1/6 to 1 ML has been tested, that allows reducing the number of plausible models to four. Two of these four models have been attributed to the “regular” intrinsic Ag/Si(100)-c(6 × 2) reconstruction, while the other two to its defect-induced modification. The latter is observed in the local areas near defects and domain boundaries and exhibits 3 × 2 periodicity. Comparing the results of calculations with the experimental STM images, it has been concluded that while the Si(100) substrate reconstruction is solid, the Ag subsystem is flexible due to the presence of the lightly bonded mobile Ag atoms.     

Neutron diffraction study of the CeFeSi-type RTiGe compounds (R=Pr,Nd, Tb–Er)

Neutron diffraction experiments were carried out on polycrystalline RTiGe (R=Pr, Nd, Tb–Er) samples. These compounds crystallise with the tetragonal CeFeSi-type structure (space group P4/nmm). This structure is closely related to the ThCr₂Si₂-type and can be described as “BaAl₄ blocks” connected via R–R contacts (“W blocks”). All the compounds are antiferromagnetic. PrTiGe and NdTiGe are characterised by an easy-plane sine-modulated structure characterised by a wave vector k=0,0,q_z=0.242 and 0.334 below 62 and 128 K, respectively. Below 80 K, NdTiGe exhibits a commensurate arrangement, which consists on ferromagnetic (0 0 1) Nd layers coupled antiferromagnetically along the c direction with the sequence ++−−. This commensurate magnetic ordering also occurs in TbTiGe, DyTiGe, HoTiGe and ErTiGe below 312, 185, 124 and 36 K, respectively. In the first three compounds (R=Tb−Ho), the magnetic moment is aligned along the c-axis whereas it is localised in the basal plane in ErTiGe. In all the RTiGe compounds, the magnitude of the ordered moments at 2 K amounts nearly to the free ion magnetic moment (gJ) values for the respective R³⁺ ions.     

The (2 × 2) reconstructions on the SrTiO3 (001) surface: A combined scanning tunneling microscopy and density functional theory study

Scanning tunneling microscopy study showed that the (2 × 2) reconstruction on the (001) surface of SrTiO₃ should have a surface structure with a 4-fold symmetry. The previously proposed solution for the (2 × 2) reconstruction with the p2gm symmetry only has a 2-fold symmetry. In this study density functional theory study was carried out to propose a possible surface structure with the p4mm surface symmetry which matches the scanning tunneling microscopy images and suggests that two different (2 × 2) surface structures exist. The formation of the (2 × 2) reconstruction with the p4mm symmetry may be due to the kinetics as it has slightly higher surface energy than the one with the p2gm symmetry.     

Acoustic power dependences of sonoluminescence and bubble dynamics

The decreasing effect of sonoluminescence (SL) in water at high acoustic powers was investigated in relation to bubble dynamics and acoustic emission spectra. The intensity of SL was measured in the power range of 1–18 W at 83.8 kHz for open-end (free liquid surface and film-covered surface) and fixed-end boundaries of sound fields. The power dependence of the SL intensity showed a maximum and then decrease to zero for all the boundaries. Similar results were obtained for sonochemiluminescence in luminol solution. The power dependence of the SL intensity was strongly correlated with the bubble dynamics captured by high-speed photography at 64 k fps. In the low-power range where the SL intensity increases, bubble streamers were observed and the population of streaming bubbles increased with the power. At powers after SL maximum occurred, bubble clusters came into existence. Upon complete SL reduction, only bubble clusters were observed. The subharmonic in the acoustic emission spectra increased markedly in the region where bubble clusters were observed. Nonspherical oscillations of clustering bubbles may make a major contribution to the subharmonic.     

Experimental study on the influence of low-frequency and low-intensity ultrasound on the permeability of the Mycobacterium smegmatis cytoderm and potentiation with levofloxacin

Tuberculosis is an infectious disease caused by the bacterium M. tuberculosis. The aim of this study was to investigate the bactericidal effect and underlying mechanisms of low-frequency and low-intensity ultrasound combined with levofloxacin treatment against M. smegmatis (a surrogate of M. tuberculosis). As part of this study, M. smegmatis was continuously irradiated with low frequency ultrasound (42 kHz) using several different doses whereby both intensity (0.138, 0.190 and 0.329 W/cm²) and exposure time (5, 15 and 20 min) were varied. Flow cytometric analyses revealed that the permeability of M. smegmatis increased following ultrasound exposure. The survival rate, structure and morphology of bacteria in the lower-dose (I_SATA = 0.138 W/cm² for 5 min) ultrasound group displayed no significant differences upon comparison with the untreated group. However, the survival rate of bacteria was significantly reduced and the bacterial structure was damaged in the higher-dose (I_SATA = 0.329 W/cm² for 20 min) ultrasound group. Ultrasound irradiation (0.138 W/cm²) was subsequently applied to M. smegmatis in combination with levofloxacin treatment for 5 min. The results demonstrated that the bactericidal effect of ultrasonic irradiation combined with levofloxacin is higher compared to ultrasound alone or levofloxacin alone.     

Systematic grid-wise radon concentration measurements and first radon map in Cyprus

A systematic study of the indoor airborne radon concentration in the central part of the Nicosia district was conducted, using high-sensitivity active radon portable detectors of the type “RADIM3A”. From a total of 108 measurements in 54 grids of 1 km² area each, the overall mean value is 20.6 ± 13.2 Bq m^?3 (A.M. ± S.D.). That is almost twice less than the corresponding average worldwide value. The radon concentration levels in drinking water were also measured in 24 sites of the residential district, using the high-sensitivity radon detector of the type “RADIM3W”. The mean value obtained from these measurements is 243.8 ± 224.8 mBq l^?1, which is relatively low compared to the corresponding internationally accepted level. The associated annual effective dose rates to each measurement were also calculated and compared to the corresponding worldwide values. From the geographical coordinates of the measuring sites and the corresponding radon concentration values, the digital radon map of the central part of the Nicosia district was constructed for the first time, by means of the ArcMap software package.     

Microstructures and nano mechanical properties of the metal tungsten film

The W film was prepared on 1045 steel by magnetron sputtering, with the thickness of 2 μm, its surface and cross-section morphologies were investigated with SEM, and the phase structure was analyzed with XRD. X-ray stress determinator was utilized to measure its residual stress, and the nano-hardness and elastic modulus of the film were surveyed by nano-indentation tester. The results show that the surface of W film is very compact and smooth; the particles arranged regularly, the granularity of the thin film is about 1 μm. The microcracks, cavities and desquamation were not found in the film and interface, and the bonding between the W film and substrate is well. The XRD results showed that the W film had a body-centered cubic structure, the lattice constant: a = 0.316 nm, the growth preferred orientations are (1 1 0) and (2 2 0). The compressive stress (−169 MPa) was found on the surface. The average nano-hardness and elastic modulus of W film are 15.22 GPa, 176.64 GPa, respectively, and the mechanical properties of W film are well.     

Bio-refinery of orange peels waste: A new concept based on integrated green and solvent free extraction processes using ultrasound and microwave techniques to obtain essential oil,polyphenols and pectin

In this study, extraction of essential oil, polyphenols and pectin from orange peel has been optimized using microwave and ultrasound technology without adding any solvent but only “in situ” water which was recycled and used as solvent. The essential oil extraction performed by Microwave Hydrodiffusion and Gravity (MHG) was optimized and compared to steam distillation extraction (SD). No significant changes in yield were noticed: 4.22 ± 0.03% and 4.16 ± 0.05% for MHG and SD, respectively. After extraction of essential oil, residual water of plant obtained after MHG extraction was used as solvent for polyphenols and pectin extraction from MHG residues. Polyphenols extraction was performed by ultrasound-assisted extraction (UAE) and conventional extraction (CE). Response surface methodology (RSM) using central composite designs (CCD) approach was launched to investigate the influence of process variables on the ultrasound-assisted extraction (UAE). The statistical analysis revealed that the optimized conditions of ultrasound power and temperature were 0.956 W/cm² and 59.83 °C giving a polyphenol yield of 50.02 mg GA/100 g dm. Compared with the conventional extraction (CE), the UAE gave an increase of 30% in TPC yield. Pectin was extracted by conventional and microwave assisted extraction. This technique gives a maximal yield of 24.2% for microwave power of 500 W in only 3 min whereas conventional extraction gives 18.32% in 120 min. Combination of microwave, ultrasound and the recycled “in situ” water of citrus peels allow us to obtain high added values compounds in shorter time and managed to make a closed loop using only natural resources provided by the plant which makes the whole process intensified in term of time and energy saving, cleanliness and reduced waste water.     

Simulation of dark current suppression in p–i–n InGaAs photodetector with In0.66Ga0.34As/InAs superlattice electron barrier

An InGaAs–based photodetector with different periods of inserting strain–compensated In_0.66Ga_0.34As/InAs superlattice (SL) electron barrier in the In_0.83Ga_0.17As absorption layer has been investigated. The band diagram, electron concentration and electric field intensity of the structure were analyzed with numerical simulation. It was found that the period of SL has a remarkable influence on the properties of the photodetectors. With the decrease of the period of In_0.66Ga_0.34As/InAs SL, the dark current density is suppressed significantly, which is reduced to 2.46 × 10⁻³ A/cm² at 300 K and a reverse bias voltage of 1 V when the period is 2.5 nm.