Molecular adsorption and the chemistry of plasma-deposited thin organic films: Deposition of oligomers of ethylene glycol

Weakly ionized, radio-frequency, glow-discharge plasmas formed from methyl ether or the vapors of a series of dimethyl oligo(ethylene glycol) precursors (general formula: H-(CH₂OCH₂)_n-H;n=1 to 4) were used to deposit organic thin films on polytetrafluoroethylene. X-ray photoelecton spectroscopy (XPS) and static secondary ion mass spectrometry (SIMS) of the thin films were used to infer the importance of adsorption of molecular species from the plasma onto the surface of the growing, organic film during deposition. Films were prepared by plasma deposition of each precursor at similar deposition conditions (i.e., equal plasma power (W), precursor flow rate (F), and deposition duration), and at conditions such that the specific energy (energy/mass) of the discharge (assumed to be constrained byW/FM, whereM=molecular weight of the precursor) was constant. At constantW/FM conditions, two levels of plasma power (and, hence, twoFM levels) and three substrate temperatures were examined. By controlling the energy of the discharge (W/FM) and the substrate temperature, these experiments enabled the study of effects of the size and the vapor pressure of the precursor on the film chemistry. The atomic % of oxygen in the film surface, estimated by XPS, and the intensity of theC-O peak in the XPS C_ls spectra of the films, were used as indicators of the degree of incorporation of precursor moieties into the plasma-deposited films. Analysis of films by SIMS suggested that these two measures obtained from XPS were good indicators of the degree of retention in the deposited films of functional groups from the precursors. The XPS and SIMS data suggest that adsorption of intact precursor molecules or fragments of precursor molecules during deposition can have a significant effect on film chemistry. Plasma deposition of low vapor pressure precursors provides a convenient way of producing thin films with predictable chemistry and a high level of retention of functional groups from the precursor.     

Enhanced surface sensitivity in secondary ion mass spectrometric analysis of organic thin films using size‐selected Ar gas‐cluster ion projectiles

A size‐selected argon (Ar) gas‐cluster ion beam (GCIB) was applied to the secondary ion mass spectrometry (SIMS) of a 1,4‐didodecylbenzene (DDB) thin film. The samples were also analyzed by SIMS using an atomic Ar⁺ ion projectile and X‐ray photoelectron spectroscopy (XPS). Compared with those in the atomic‐Ar⁺ SIMS spectrum, the fragment species, including siloxane contaminants present on the sample surface, were enhanced several hundred times in the Ar gas‐cluster SIMS spectrum. XPS spectra during beam irradiation indicate that the Ar GCIB sputters contaminants on the surface more effectively than the atomic Ar⁺ ion beam. These results indicate that a large gas‐cluster projectile can sputter a much shallower volume of organic material than small projectiles, resulting in an extremely surface‐sensitive analysis of organic thin films. Copyright © 2010 John Wiley & Sons, Ltd.     

Monte Carlo simulation of AB diblock copolymer between surface and substrate and comparison of experimental results

The morphologies of AB diblock copolymer film between the substrate and surface were investigated via Monte Carlo simulations on simple cubic lattices. The morphological dependence of the diblock copolymer thin film on the thickness, as well as the composition and interactive intensity has been mainly studied. With the increase of A‐segments fraction, various microdomain morphologies including regular parallel stripe‐like, mesh‐like, and normal lamella near the region of the surface were generated in this work. The morphology of thin films of asymmetric diblock copolymer was found to form cylinders in a bulk system when L_z was equal to 30. The morphologies of PS‐b‐PDMS diblock copolymer films have been studied via atomic force microscopy (AFM) and transition electron microscopy (TEM) measurements. The surface morphology of the PS‐b‐PDMS copolymer thin film shows a mesh‐like microphase separated structure, and PDMS continuous phase protruded on the PS dispersed phase. The surface composition of PS‐b‐PDMS copolymer thin films was measured by means of X‐ray photoelectron spectroscopy (XPS) and ATR‐IR. The comparison results show that the experimental observations are in good agreement with the simulation results. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1835–1845, 2006     

Characterization of traditional Korean lacquers using surface analytical techniques

Traditional Korean lacquer films, such as Otchil and Hwangchil, are natural paints extracted from Rhus vernicifera and Dendropanax morbifera trees that grow in the eastern part and on the west and south coast of the Korean Peninsula, respectively. Rhus lacquer has a black color, and Hwangchil has a transparent gold color and a rich camphoric perfume (benzoin). These lacquers have been used since ancient times. In this study, analytical techniques, such as Fourier transform infrared (FT‐IR) spectroscopy, X‐ray photoelectron spectroscopy (XPS), and time‐of‐flight secondary ion mass spectrometry (TOF‐SIMS), were used to study the traditional Rhus lacquer and Hwangchil films, avoiding time‐consuming and destructive extraction procedures. To compare the Rhus and Hwangchil lacquers, reference lacquer films were prepared using Rhus and Dendropanax saps. These films were then analyzed using FT‐IR, XPS, and TOF‐SIMS. After establishing the methodology using the reference lacquer films, surface analytical techniques were applied to two different plates painted by an artist. The results suggest that FT‐IR, XPS, and TOF‐SIMS are simple and complementary analytical techniques for the discrimination of old lacquer films. Copyright © 2015 John Wiley & Sons, Ltd.     

The First Recyclable,Nanocrystalline CdS Thin Film Mediated Eco‐benign Synthesis Of Hantzsch 1, 4 Dihyropyridines, 1, 8‐Dioxodecahydroacridine and Polyhydroquinolines derivatives

In the present study, we report a recyclable, nanocrystalline CdS thin film mediated efficient one‐pot, three component synthesis of Hantzsch 1, 4 Dihydropyridine in good yields. The catalyst is also effective for the efficient synthesis of Polyhydroquinoline and 1, 8‐dioxodecahydroacridine derivatives in good to excellent yields. The CdS thin film catalyst was prepared by chemical bath deposition (CBD) technique. The cadmium sulphide thin film was characterized by powder XRD and FT‐IR studies. The average crystallite size (D) was calculated from powder XRD by using Scherrer formula and SEM analysis. The elemental composition of the CdS thin film was established by EDS analysis. The effect of temperature, substituent's, catalyst loading and mole ratio on the reaction was also studied. All the products were thoroughly characterized by ¹H‐NMR, ¹³C‐NMR, FT‐IR, Mass spectral and CHN analysis. A plausible mechanism for the CdS thin film catalyzed synthesis of 1, 4 DHP's is proposed. The heterogeneous catalyst could be easily recovered from the reaction mixture and successively reused at least five times without loss of activity.     

Bioactivity and mechanical properties of nickel‐incorporated hydrogenated carbon nanocomposite thin films

In this paper, the influence of nickel incorporation on the mechanical properties and the in vitro bioactivity of hydrogenated carbon thin films were investigated in detail. Amorphous hydrogenated carbon (a‐C:H) and nickel‐incorporated hydrogenated carbon (Ni/a‐C:H) thin films were deposited onto the Si substrates by using reactive biased target ion beam deposition technique. The films' chemical composition, surface roughness, microstructure and mechanical properties were investigated by using XPS, AFM, TEM, nanoindentation and nanoscratch test, respectively. XPS results have shown that the film surface is mainly composed of nickel, nickel oxide and nickel hydroxide, whereas at the core is nickel carbide (Ni₃C) only. The presence of Ni₃C has increased the sp² carbon content and as a result, the mechanical hardness of the film was decreased. However, Ni/a‐C:H films shows very low friction coefficient with higher scratch‐resistance behavior than that of pure a‐C:H film. In addition, in vitro bioactivity study has confirmed that it is possible to grow dense bone‐like apatite layer on Ni/a‐C:H films. Thus, the results have indicated the suitability of the films for bone‐related implant coating applications. Copyright © 2011 John Wiley & Sons, Ltd.     

Self‐organization and luminescent properties of nanostructured europium (III)–block copolymer complex thin films

We introduce a simple method to create nanosized, ordered, and highly luminescent thin film of Eu (III)–block copolymer complex. Micelles of polystyrene–block‐poly(4‐vinylpyridine) (PS‐b‐P4VP) in P4VP‐selective solvents (ethanol/N,N‐dimethylformamide (DMF) mixture) serve as nanoreactors for the synthesis of Eu(III)–block copolymer complex with the presence of 1,10‐phenanthroline (Phen) as cooperative ligand. The resulted quaternary complexes were characterized by FT‐IR spectra, ¹⁵N NMR spectra, and elemental analysis, indicative of a composition of Eu(III)–(PS‐b‐P4VP)–Phen–5DMF. Atomic force microscopy and transmission electron microscopy investigations reveal that the Eu(III)–(PS‐b‐P4VP)–Phen–5DMF complex can self‐organize into hexagonally ordered thin films when dip‐coated from the solution onto silicon or silica glass substrates. Such ordered thin films can emit red fluorescence of Eu³⁺ with strong intensity and long lifetime. This method can be easily extended to prepare other ordered luminescent rare earth–polymer complexes thin films. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2181–2189, 2005     

A Novel Thin‐Film Copper Array Based on an Organic/Inorganic Sensor Hybrid: Microfabrication,Potentiometric Characterization,and Flow‐Injection Analysis Application

A first step towards the microfabrication of a thin‐film array based on an organic/inorganic sensor hybrid has been realized. The inorganic microsensor part incorporates a sensor membrane based on a chalcogenide glass material (Cu‐Ag‐As‐Se) prepared by pulsed laser deposition technique (PLD) combined with an PVC organic membrane‐based organic microsensor part that includes an o‐xylyene bis(N,N‐diisobutyl‐dithiocarbamate) ionophore. Both types of materials have been electrochemically evaluated as sensing materials for copper(II) ions. The integrated hybrid sensor array based on these sensing materials provides a linear Nernstian response covering the range 1×10^?6–1×10^?1 mol L^?1 of copper(II) ion concentration with a fast, reliable and reproducible response. The merit offered by the new type of thin‐film hybrid array includes the high selectivity feature of the organic membrane‐based thin‐film microsensor part in addition to the high stability of the inorganic thin‐film microsensor part. Moreover, the thin‐film sensor hybrid has been successfully applied in flow‐injection analysis (FIA) for the determination of copper(II) ions using a miniaturized home‐made flow‐through cell. Realization of the organic/inorganic thin‐film sensor hybrid array facilitates the development of a promising sophisticated electronic tongue for recognition and classification of various liquid media.     

Cross‐linked Multilayer Polymer‐Clay Nanocomposites and Permeability Properties

Abstract

Electrostatically layered aluminosilicate nanocomposites have been prepared by the sequential deposition of poly(allylamine hydrochloride)/poly(acrylic acid)/poly(allylamine hydrochloride)/saponite (PAH/PAA/PAH/saponite)₁₀ on poly(ethylene terephtalate) (PET) film. Exfoliated saponite nanoplatelets were obtained by extensive shaking, sonication, and centrifugation of a water suspension. To minimize permeability and improve the mechanical integrity, cross‐linking of composite films was carried out at different temperatures. The formation of amide linkage induced through heating was observed by Fourier Transform Infrared (FT‐IR) and x‐ray photoelectron spectroscopy (XPS). The cross‐linking of nanocomposites (PAH/PAA/PAH/saponite)₁₀ showed 60% decrease in permeability of oxygen when compared with the pristine PET substrate film. In contrast, water permeability of the nanocomposite membrane was not affected by heating temperature and deposition cycles.     

Infrared spectroscopic ellipsometry (IRSE) and X‐ray photoelectron spectroscopy (XPS) monitoring the preparation of maleimide‐functionalized surfaces: from Au towards Si (111)

The IR ellipsometric technique was used to identify the surface species and to control the preparation of maleimide‐terminated surfaces. Because of higher s/n ratios for metallic substrates, the protocol was initially developed on Au surfaces, was later successfully transferred to technologically more relevant Si (111) substrates. The functionalized surfaces were achieved by electrochemical deposition of diazonium linker films and following chemical adsorption steps. Complementary XPS was also employed to detect the surface species in the process of preparation. The immobilization of different functional molecules was proven by interpreting the specific vibrational bands in IR spectra and additionally confirmed by XPS experiments. The surface homogeneity was investigated by FT‐IR synchrotron mapping ellipsometry. This work shows that the proposed protocol is an effective pathway to achieve the desired functionalized surfaces. Copyright © 2010 John Wiley & Sons, Ltd.     

Development of solution‐dispersible hyperbranched conjugated polymer nanoparticles for Fe3+ fluorescent detection and their application in logic gate

Solution‐dispersible hyperbranched conjugated polymer nanoparticles (FT‐HBCPNs) consist of an intrinsic crosslinked rigid skeleton structure of both 9,9‐dihexyl‐fluorene and triphenylamine repeating units, and are synthesized via the miniemulsion Suzuki polymerization, and FT‐HBCPNs for highly selective and sensitive Fe³⁺ fluorescent detection and their application in logic gate at molecular level are successfully developed. FT‐HBCPNs with an average particle size of 10.6 nm can disperse in common organic solvents. FT‐HBCPNs show high selectivity and sensitivity for Fe³⁺ over other commonly co‐existent metal ions in THF solution with a detection limit of 3.65 × 10^?8 mol L^?1. Furthermore, homogeneous transparent thin films of FT‐HBCPNs developed by a simple spin‐coating method can be reversibly quenched by Fe³⁺ with a detection limit of 3.09 × 10^?7 mol L^?1. Using Fe³⁺ and EDTA as chemical inputs and the fluorescence intensity signal as outputs, FT‐HBCPNs films can be utilized as a logic gate at molecular level. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3694–3700     

Influence of deposition pressure on hydrogenated amorphous carbon films prepared by d.c.‐pulse plasma chemical vapor deposition

Hydrogenated amorphous carbon films (a‐C : H) were prepared by d.c.‐pulse plasma chemical vapor deposition using CH₄ and H₂ gases. The microstructure and hardness of the resulting films were investigated at different deposition pressures (6, 8, 11, 15, and 20 Pa). The growth rate increased sharply from 3.2 to 10.3 nm/min with increasing the pressure from 6 to 20 Pa. According to Raman spectra, XPS, and Fourier transform infrared analysis, the films deposited at the pressure of 6 and 8 Pa have high sp³ content and show typical diamond‐like character. However, the microstructures and bond configuration of the films deposited at 11, 15, and 20 Pa have high sp² content and favored fullerene‐like nanostructure. The hardness and sp² content were shown to reach their minimum values simultaneously at a deposition pressure of 8 Pa and then increased continuously. The film with fullerene‐like nanostructure obtained at 20 Pa displays a high Raman I_D/I_G ratio (~1.6), and low XPS C 1s binding energy (284.4 eV). The microstructural analysis indicates that the films are composed of a hard and locally dense fullerene‐like network, i.e. a predominantly sp²‐bonded material. The rigidity of the films is basically provided by a matrix of dispersed cross‐linked sp² sites. Copyright © 2012 John Wiley & Sons, Ltd.     

Fine Surface Structure of Large-Scale Tetraphenylporphine Aggregates

Thin films of protonated meso-tetraphenylporphine were studied by IR spectroscopy and contact atomic force microscopy. Thin films of protonated porphine were shown to contain large amount of bound water, the most of which, however, can be removed by hygroscopic CsI. All water bands of the IR spectrum of a thin film are similar to those of liquid water including the broad band at 2000–2400 cm¹. The changes in the doublet at 1440 and 1473 cm^–1 characteristic of the IR spectrum of tetraphenylporphine pressed with KBr tablet indicate the donor–acceptor interaction between its molecules in thin films. Spherical nanoparticles with a diameter of 30–80 nm, as well as larger nanoparticles with different plasticity of water–porphine core, were detected using atomic force microscope. These particles are formed in a solution and shape a peculiar relief of thin films upon their sticking and sedimentation; this relief is represented by the isolated nanoparticles, submicroscopic grains, and microscopic domains.     

Patterning of cells on a PVC film surface functionalized by ion irradiation

Micropatterns of cells on a poly(vinyl chloride) (PVC) film surface were created by using ion irradiation. A PVC film was irradiated with H⁺ ions through a pattern mask in order to create patterns of the hydrophilic/hydrophobic regions on the PVC surface. The effect of ion irradiation on the surface properties of the PVC film was characterized by using Fourier transform‐infrared spectroscopy (FT‐IR), water contact angle measurement, and X‐ray photoelectron spectroscopy (XPS). The results revealed that the chemical environment of the PVC film surface was effectively changed by ion irradiation due to dehydrochlorination and oxidation. The in vitro cell culture on the patterned PVC film surface showed selective adhesion and proliferation of the cells on the ion‐irradiated regions. Well‐defined 50 µm patterns of the cells were obtained on the PVC film surface irradiated to 1 × 10¹⁵ ions/cm². Copyright © 2009 John Wiley & Sons, Ltd.     

Study of the first nucleation steps of thin films by XPS inelastic peak shape analysis

The initial steps in the formation of thin films have been investigated by analysis of the peak shape (both inelastic background and elastic contributions) of X‐ray photoelectron spectra. Surface coverage and averaged height of the deposited particles have been estimated for several overlayers (nanometre range) after successive deposition cycles. This study has permitted the assessment of the type of nucleation and growth mechanisms of the films. The experiments have been carried out in situ in the preparation chamber of an XPS spectrometer. To check the performance of the method, several materials (i.e. cerium oxide, vanadium oxide and cadmium sulfide) have been deposited on different substrates using a variety of preparation procedures (i.e. thermal evaporation, ion beam assisted deposition and plasma enhanced chemical vapour deposition). It is shown that the first deposited nuclei of the films are usually formed by three‐dimensional particles whose heights and degree of surface coverage depend on the chemical characteristics of the growing thin film and substrate materials, as well as the deposition procedure. It is concluded that XPS peak shape analysis can be satisfactorily used as a general method to characterize morphologically the first nanometric moieties that nucleate a thin film. Copyright © 2006 John Wiley & Sons, Ltd.     

Synthesis and characterization of zinc bis(O‐isopropylxanthate) as a single‐source chemical vapor deposition precursor for ZnS

The utilization of single‐source molecular precursors in chemical vapor deposition (CVD) experiments requires a deep knowledge of their chemico‐physical properties, with particular regard to thermal stability and fragmentation pattern. This study describes the synthesis and characterization of zinc bis(O‐isopropylxanthate), Zn(O‐ⁱPrXan)₂, [O‐ⁱPrXan = (CH₃)₂CHOCS₂], a single‐source precursor for the CVD of zinc(II) sulfide thin films and nanorods. Several analytical methods yielding complementary information (extended X‐ray absorption fine structure, Raman, FT‐IR, UV–Vis optical absorption, ¹H and ¹³C NMR, thermogravimetric analysis, differential scanning calorimetry as well as mass spectrometry techniques, i.e. electrospray and electron ionization, mass‐analyzed ion kinetic energy) are adopted for a comprehensive investigation of purity, structure, thermal behavior and decomposition pathways of the molecule. The most significant results are discussed critically and the properties useful for CVD applications are highlighted. Copyright © 2005 John Wiley & Sons, Ltd.     

Evaporated thin films of insulating poly-(tetrabromo-p-phenylenediselenide)

It has been shown that thin insulating film at the interface transparent conductive oxide/organic electroluminescent film could improve the performance of organic electroluminescent diodes (OLED). Such insulating film can be inorganic or organic. Poly-(tetrabromo-p-phenylenediselenide) (PBrPDSe) has been proved to be an efficient insulating film in OLED. The properties of these evaporated PBrPDSe thin films have been systematically studied by IR absorption, X-ray diffraction, X-ray photoelectron spectroscopy, scanning electron microscopy, electron spin resonance and optical transmission measurements. It is shown that, when the deposition temperature is kept below the decomposition temperature of the polymer, tetrabromo-p-phenylenediselenide molecule is preserved during the deposition process. However the polymer, which is insoluble in powder form, becomes soluble after deposition. It can be concluded that films are mainly composed of oligomers of tetrabromo-p-phenylenediselenide.The electrical properties of SnO₂/PBrPDSe/Al thin films structures have been studied. The current-voltage characteristics exhibit a rectifying behaviour with a forward direction corresponding to a positive bias of the transparent conductive oxide film, the SnO₂.     

Surface Engineering of Poly(DL‐lactic acid) by Entrapment of Biomacromolecules

Alginate, chitosan and gelatin were deposited on the surface of PDL‐LA films via an entrapment method. ATR‐FT‐IR, XPS and contact‐angle analyses revealed the formation of stable thin biomacromolecule layers on the PDL‐LA film, thus enhancing the hydrophilicity of the films. Confocal laser scanning microscopy showed the existence of entrapment areas of approximately 10–20 μm in depth. This simple surface‐treatment method may have the potential for many biomedical applications.     

Plasma polymerization and deposition of glycidyl methacrylate on Si(100) surface for adhesion improvement with polyimide

Thin polymer films were deposited on Si(100) surfaces by plasma polymerization of glycidyl methacrylate (GMA) under different glow discharge conditions. The FT‐IR, X‐ray photoelectron spectroscopy (XPS), and amine treatment results suggested that the epoxide functional groups of the deposited films had been preserved to various extents, depending on the plasma deposition conditions. The use of a low radio frequency power (～ 5 W) and a relatively high system pressure (100–400 Pa) readily resulted in the deposition of thin films having nearly the same composition of the epoxide functional groups as that of the GMA homopolymer. The plasma‐polymerized GMA (PP‐GMA) thin films deposited on the Ar plasma‐pretreated Si(100) surfaces were retained to a large extent after acetone extraction, suggesting the presence of covalent bonding between the PP‐GMA layer and the Si surface. Thermal imidization of the poly(amic acid) precursor of polyimide on the GMA plasma‐polymerized Si(100) surface resulted in a strongly adhered polyimide film. The adhesion results further suggested that the GMA polymer had been grafted on the Si(100) surface and the epoxide functional groups had undergone reactive interaction (curing) with the carboxylic and amine groups of the poly(amic acid) during thermal imidization. Copyright © 2001 John Wiley & Sons, Ltd.     

Photocatalytic Nanocomposite Films Fabricated by Layer‐by‐Layer Self‐assembly of TiO2 Nanoparticles and Lignosulfonates

Photocatalytic multilayer nanocomposite films composed of anatase TiO₂ nanoparticles and lignosulfonates (LS) were fabricated on quartz slides by the layer‐by‐layer (LBL) self‐assembly technique. X‐ray photoelectron spectroscopy (XPS), UV‐vis spectroscopy and atomic force microscopy (AFM) were used to characterize the TiO₂/LS multilayer nanocomposite films. Moreover, the photocatalytic properties (decomposition of methyl orange and bacteria) of multilayer nanocomposite films were investigated. XPS results indicated that the intensities of titanium and sulfur peaks increased with the LBL deposition process. A linear increase in absorbance at 280 nm was found by UV‐Vis spectroscopy, suggesting that stepwise multilayer growth occurs on the substrate and this deposition process is highly reproducible. AFM images showed that quartz slide was completely covered by TiO₂ nanoparticles when a 10‐bilayer multilayer film was formed. The decomposition efficiency of methyl orange by TiO₂/LS multilayer films under the same UV irradiation time increased linearly with the number of TiO₂ layers, and the results of decomposition of bacteria under UV irradiation showed that TiO₂/LS multilayer nanocomposite films exhibited excellent decomposition activity of bacteria (Escherichia coil).