2,6-二(对氨基苯)苯并[1,2-d;5,4-d']二噁唑的合成

以4,6-二氨基间苯二酚二磷酸盐和对氨基苯甲酸为原料,在多聚磷酸中,添加还原剂SnCl_2·2H_2O,经缩聚反应合成了有机二胺单体——2,6-二(对氨基苯)苯并[1,2-d;5,4-d']二噁唑(DIABO),其结构经~1H NMR和FT-IR确证。最佳反应条件为:1 0.01 mol,PPA中P_2O_5质量分数为84%,SnCl_2·2H_2O用量为8 wt%,在氮气保护下于200℃反应4 h,产率97%。TG研究结果表明:DIABO的起始分解温度为401.0℃。     

2,6-二取代苯并二噁唑的合成方法研究

文献报道合成2,6-二芳基取代苯并[1,2-d;4,5-d']二(口恶)唑有两种方法,其一是2,5-二氨基对苯醌与芳香醛缩合,然后氧化,关环;其二是2,5-二氨基对苯二酚盐酸盐与酰氯缩合关环.     

2,6-二取代苯并二噁唑的研究(Ⅲ)——2,6-二苯乙烯基苯并二噁唑和它们的衍生物

通过2,6-二甲基苯并[1,2d;4,5d′]二噁唑和2,6-二甲基苯并[1,2d;5,4d′]二噁唑分别与苯甲醛和取代苯甲醛缩合备制取七种相应的2,6-二苯乙烯基苯并[1,2d;4,5d′]二噁唑和2,6-二苯乙烯基苯并(1,2d;5,4d′]二噁唑。测定了全部化合物的熔点、红外光谱、紫外光谱、荧光光谱、激光转换效率。     

2,6-二取代苯并二噁唑的研究(Ⅰ)

合成了八种2,6-二取代苯并[1,2d;4,5d′]二噁唑和八种2,6-二取代苯并[1,2d;5,4d′]二噁唑,测定了化合物的熔点、紫外光谱、荧光发射光谱及激光性能。     

聚苯并双噁唑酰亚胺的热分解动力学研究

采用二步法合成了以2,6-二(对-氨基苯)苯[1,2-d;5,4-d’]二噁唑和1,4-二(3,4-二苯氧基)苯四甲酸二酐(HQDPA)为单体的聚苯并双噁唑酰亚胺.该聚酰亚胺的预聚体聚酰胺酸的黏度为1.70 dL/g,经过热环化后能够生成浅黄色的聚酰亚胺薄膜.通过热重分析法研究了聚苯并双噁唑酰亚胺在N2气氛中的热降解机理.采用Flynn-Wall-Ozawa和Friedman法计算了聚苯并双噁唑酰亚胺热降解表观活化能,分别为356.36kJ/mol和370.54 kJ/mol,平均值为363.45 kJ/mol;反应级数为4.22,指前因子为6.44×1016s-1.采用Coast-Redfern法和Phadnis-Deshpande法研究了聚苯并双噁唑酰亚胺的热降解固相反应机理,认为该聚酰亚胺的热降解机理属于反曲线(A3)机理,是成核和增长模式(Avrami equation 2方程)控制的热降解反应,积分形式为g(X)=[-ln(1-X)]3.     

2,6-二(对氨基苯)苯并[1,2-d;5,4-d′]二噁唑的合成和纯化

1 ,2 ,3 三氯苯经过硝化、水解、催化加氢、缩合等四步反应 ,合成了 2 ,6 二 (对氨基苯 )苯并 [1,2 d ;5 ,4 d′]二唑 ,总产率为 70 % .同时 ,研究了一种有效的重结晶 2 ,6 二 (对氨基苯 )苯并 [1,2 d ;5 ,4 d′]二唑的方法 .与其他方法相比 ,该法原料便宜易得 ,产物可作为聚合反应的单体原料 .     

苯并二噁唑系列聚合物的合成及表征

以4,6-二氨基-1,3-苯二酚盐酸盐为原料,分别和对苯二甲酸、1,4-萘二甲酸、2,6-萘二甲酸、2,5-噻吩二甲酸、4,4-′(1,2-二苯基乙烯)二甲酸在多聚磷酸介质中反应,合成单环的聚(1,4-亚苯基)苯并二噁唑(PBO)、稠环的聚(1,4-亚萘基)苯并二噁唑(1,4-PNBO)和聚(2,6-亚萘基)苯并二噁唑(2,6-PNBO)、杂环的聚(2,5-亚噻吩基)苯并二噁唑(PTBO)及含有两个苯环的聚-4,4′-亚(1,2-二苯乙烯基)苯并二噁唑(4,4′-PDPEBO).采用傅立叶红外光谱、热重分析、元素分析、特性黏数分析对系列聚合物进行了表征.研究结果表明PBO、1,4-PNBO、4,4-′PDPEBO、2,6-PNBO和PTBO 5种聚合物的耐热性能依次降低,特性黏数依次为25.40、16.76、20.63、15.38和14.63 dL/g.     

2,6-二取代苯并二噁唑的研究(Ⅳ)——2,6-二苯乙烯基苯并二噁唑及其对位衍生物的HMO计算及光谱的取代基效应

本文用HMO方法计算处理了2,6-二苯乙烯基苯并[1,2d;4,5d＇)-二(口恶)唑和2,6-二苯乙烯基苯并[1,2d;5,4d＇]-二(口恶)唑和它们的各十种对位取代衍生物,得到它们的π电子能级与分子图,对其中一些化合物的紫外(UV)和荧光(FL)光谱的取代基效应也在HMO理论基础上进行了若干分析。     

二氢噁唑并[5,4-d]吡咯并[1,2-a]嘧啶酮的合成及生物活性研究

以天然产物脱氧鸭嘴花酮生物碱为基础,通过生物电子等排手段,设计并合成了 40个二氢噁唑并[5,4-d]吡咯并[1,2-a]嘧啶酮类化合物,其结构经1H NMR、13C NMR和HRMS进行了确证,并对该类化合物合成方法的关键步骤影响因素和构效关系进行了探讨.使用噻唑蓝(MTT)法对该系列化合物的3种肿瘤细胞(MCF-7...     

苯并双噁唑类聚合物的合成

详细介绍了以4,6-二氨基间苯二酚盐酸盐(DADHB)为原料,采用多聚磷酸法、三甲基硅烷基化法、中间相聚合法、单体成盐法合成聚对苯撑苯并双噁唑(PBO),还有以4,6-二硝基间苯二酚(DNR)为原料,先选择还原制得4-氨基-6-硝基间苯二酚盐酸盐,进而与对甲氧羰基苯甲酰氯进行缩环合获得苯并噁唑化合物,再催化加氢合成AB型PBO新单体2-(对甲氧羰基苯基)-5-氨基-6-羟基苯并噁唑,最后自缩聚反应制备PBO的新路线.另外,本文还介绍了直链烯烃型、直链脂肪烷烃型、稠环芳烃型、联苯取代基型、杂环型、聚醚型等苯并双噁唑类聚合物的合成方法.     

Facile sulfur‐assisted carbonylation of diaminoresorcinol with carbon monoxide

4,6‐Diaminoresorcinol, which is a raw material of ZYLON (PBO fiber), has an instability in air atmosphere. Therefore, very stable benzo[1,2‐d:5,4‐d']bis‐2(3H)‐oxazolone recognized a useful equivalent of 4,6‐diaminoresorcinol during the stages of production, storage, and transportation. By combining the sulfur‐assisted carbonylation of 4,6‐diaminoresorcinol dihydrochloride with carbon monoxide and triethylamine under 0.1 MPa at 20°C for 4 h in DMF with the oxidation of resulting hydrogen sulfide salt with molecular oxygen for 2 h, benzo‐[1,2‐d:5,4‐d']bis‐2(3H)‐oxazolone was obtained in a quantitative yield. Also, carbonylation of 2,5‐diaminohydroquinone dihydrochloride and 2,5‐diamino‐1,4‐benzenedithiol dihydrochloride was smoothly performed to give benzo[1,2‐d:4,5‐d']bis‐2(3H)‐oxazolone and benzo[1,2‐d:4,5‐d']bis‐2(3H)‐ thiazolone, respectively, in good to excellent yields under similar reaction conditions. Furthermore, 2,6‐dimercaptobenzo[1,2‐d:5,4‐d']bisoxazole, which is another equivalent of 4,6‐diaminoresorcinol, was obtained in excellent yield by the thiocarbonylation of 4,6‐diaminoresorcinol dihydro‐chloride with carbon disulfide in the presence of 1‐methylpyrrolidine at 20°C for 24 h in DMF. © 2011 Wiley Periodicals, Inc. Heteroatom Chem 23:111–116, 2012; View this article online at wileyonlinelibrary.com . DOI 10.1002/hc.20746     

A study of benzobisoxazole and benzobisthiazole compounds and polymers under hydrolytic conditions

The stability of benzobisoxazole and benzobisthiazole compounds and polymers under hydrolytic conditions was studied. 2,6-Bis(4-tert-butylphenyl)benzo[1,2-d;4,5-d′]bisoxazole (1) dissolved in acetonitrile containing sulfuric acid and water at 80°C is stable. A suspension of 2,6-bis[4-(2-benzoxazoyl)phenyl]benzo[1,2-d;5,4-d′]bisoxazole (2) in 0.2 N H₂SO₄ or 0.2 N NaOH solution at 100°C for 21 days is stable. The intrinsic viscosity of a poly(p-phenylene)benzobisoxazole (PBO) fiber sample soaked in 0.2 N H₂SO₄, water with 1 wt % polyphosphoric acid (PPA), or 0.2 N NaOH remained the same. Under very severe hydrolytic conditions such as dissolution of compound 2 or PBO in PPA or methanesulfonic acid with residual water followed by coagulation in water, benzobisoxazole underwent bond cleavage to generate carboxylic acid and o-aminophenol functional groups. This is in contrast to an earlier hypothesis that the decrease in intrinsic viscosity under these conditions was due to chain association. Poly(p-phenylene)benzobisthiazole (PBT) also underwent bond cleavage under these very severe conditions, which are unlikely to be encountered in normal applications. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2637–2643, 1999     

Molecular composite fibers from rigid rod polymers and thermoset resin matrixes

Fibers consisting of a rigid rod polymer and thermoset resin matrices were prepared. Poly(benzo-[1,2-d : 5,4-d′]bisoxazole-2,6-diyl)-1,4-phenylene} (PBO) in polyphosphoric acid (PPA) was blended with isophthaloyl bis-4-benzocyclobutene (1) or 2,6-bis-4-benzocyclobutene benzo[1,2-d: 5,4-d′]bisoxazole (2), and fibers were spun from these dopes. As-spun fibers that did not show phase segregation between the two components as examined with an optical microscope, were soluble in methanesulfonic acid (MSA). After heat treat-ment, the fibers swelled but did not dissolve in MSA. A fiber cross section of heat-treated PBO-1 fiber showed well-dispersed benzocyclobutene polymer domains of 200–500 Å by transmission electron microscopy (TEM). Films cast from MSA solutions of PBO and 2 were homogeneous, and TEM of heat-treated fiber showed only one phase. A molecular composite fiber was made. Some of these fibers showed 20–30% improvement in compressive strength over unmodified PBO fiber. © 1995 John Wiley & Sons, Inc.     

2,6-二[4-′(N,N-二苯基氨基)芪]苯并[1-2,4-5]二噁唑的合成与发光特性

通过对二苯氨基苯甲醛与2,6-二(4-氯甲基苯基)苯并[1-2,4-5]二唑之间的Wittig-Horner反应,设计并合成了一个2,6-二[4-′(N,N-二苯基氨基)芪]苯并[1-2,4-5]二唑新化合物,目的在于均二苯乙烯分子中同时引入空穴传输和电子传输结构单元,可望提高均二苯乙烯型发光材料的发光强度和光量子效率.采用UV-VisI、R1、HNMR和元素分析等分析方法对合成产物结构进行了确认,并考察了溶剂对其光致发光特性的影响.所合成化合物的相关分析数据表明:1)其分子中的两个均二苯乙烯基均为反式“芪”结构特征;2)随溶剂极性增高,其UV-Vis光谱和荧光光谱的λmax红移;3)可用作蓝色发光材料.     

Preparation of High-performance Polyimide Fibers with Wholly Rigid Structures Containing Benzobisoxazole Moieties

In this work, a fully rigid coplanar symmetric heterocyclic unit was introduced into the rigid polyimide macromolecular backbone structure to prepare high-performance polyimide fibers. The novel co-polyimide(co-PI) fibers based on 3,3',4,4'-biphenyltetracarboxylic anhydride(BPDA), p-phenylenediamine(PDA) and 2,6-(4,4'-diaminodiphenyl) benzo[1,2-d:5,4-d'] bisoxazole(PBOA) were fabricated via a twostep wet-spinning method. The effects of benzobisoxazole moiety on spinnability, aggregation structure, and mechanical properties of fibers were systematically discussed. The detailed structural analysis revealed that the well-defined aggregation structures of co-PI fibers were obtained from initial amorphous structure when post hot-drawing temperature was higher than 460 ℃ under proper drawing ratio, and the incorporation PBOA into BPDA-PDA structures produced more compact structural co-PI fiber than homo BPDA-PDA fiber. The BPDA-PDA/PBOA co-PI fibers exhibited optimum tensile strength and modulus of 2.65 and 103 GPa, which increased by 182% and 84% compared to the homo BPDA-PDA fiber, respectively.     

Unexpected formation of a xanthone in the synthesis of a bisbenzoxazole

Recently we reported the synthesis in polyphosphoric acid of a graft copolymer consisting of a rigid-rod poly[benzo(1,2-d;4,5-d′)bisthiazole-2,6-diyl]-1,4-phenylene backbone and flexible poly(oxy-1,3-phenylenecarbonyl-1,4-phenylene) side-chains [1]. However, upon extension of this synthetic approach to the analogous graft copolymer with a poly[benzo(1,2-d:5,4-d′)bisoxazole-2,6-diyl]-1,4-phenylene backbone, we encountered some unexpected results due to methyl group migration. In order to better understand these results, we carried out the synthesis of selected benzothiazole and benzoxazole structures under appropriate reaction conditions. The results are reported in this article.     

2,6-二取代苯并二噁唑的研究(Ⅱ)——2,6-二苯基苯并二噁唑及其对位取代衍生物的HMO计算及其光谱的取代基效应

本文对几种2,6-二苯基苯并二噁唑及其对位衍生物进行了HMO计算,得到有关π电子能级和分子图,并对其紫外吸收和荧光光谱的取代基效应结合简单分子轨道理论进行了分析。     

Microwave-assisted synthesis of novel N-(4-phenylthiazol-2-yl)-benzo[d]thiazole-, thiazolo[4,5-b]pyridine-, thiazolo[5,4-b]pyridine- and benzo[d]oxazole-2-carboximidamides inspired by marine topsentines and nortopsentines

We report the synthesis of novel N-(4-phenylthiazol-2-yl)-substituted benzo[d]thiazole-, thiazolo[4,5-b]pyridine-, thiazolo[5,4-b]pyridine- and benzo[d]oxazole-2-carboximidamides, which were inspired by marine topsentines and nortopsentines. Condensation of 4,5-dichloro-1,2,3-dithiazolium chloride (Appel salt) with various ortho-halogenated anilines, aminopyridines and aminophenols gave the corresponding aryliminodithiazoles in good to excellent yields. Copper(I)-mediated or nucleophilic-assisted cyclization of aryliminodithiazoles furnished cyano-functionalized benzo[d]thiazoles, thiazolo[4,5-b]- and thiazolo[5,4-b]-pyridines and benzo[d]oxazoles. The latter were condensed with substituted 4-phenylthiazol-2-amines to furnish twenty seven new polyaromatic carboximidamides in moderate to good yields.