KINETICS OF FORMATION AND STABILITY CONSTANTS OF MONO AND BIS l-TYROSINE COMPLEXES OF Cu(II), Co(II), AND Ni(II)

Abstract

The kinetics and stability constants of l-tyrosine complexation with copper(II), cobalt(II) and nickel(II) have been studied in aqueous solution at 25° and ionic strength 0.1 M. The reactions are of the type M(HL)^(3-n)+ _n-1 + HL- ? M(HL)^(2-n)+_n(k_n, forward rate constant; k_-n, reverse rate constant); where M=Cu, Co or Ni, HL^? refers to the anionic form of the ligand in which the hydroxyl group is protonated, and n=1 or 2. The stability constants (K_n=k_n/k_-n) of the mono and bis complexes of Cu²⁺, Co²⁺ and Ni²⁺ with l-tyrosine, determined by potentiometric pH titration are: Cu²⁺, log K₁=7.90 ± 0.02, log K₂=7.27 ± 0.03; Co²⁺, log K₁=4.05 ± 0.02, log K₂=3.78 ± 0.04; Ni²⁺, log K₁=5.14 ± 0.02, log K₂=4.41 ± 0.01. Kinetic measurements were made using the temperature-jump relaxation technique. The rate constants are: Cu²⁺, k₁=(1.1 ± 0.1) × 10⁹ M ^?1 sec^?1, k_-1=(14 ± 3) sec^?1, k₂=(3.1 ± 0.6) × 10⁸ M ^?1 sec^?1, k^?2=(16 ± 4) sec^?1; Co²⁺, k₁=(1.3 ± 0.2) × 10⁶ M ^?1 sec^?1, k_-1=(1.1 ± 0.2) × 10² sec^?1, k₂=(1.5 ± 0.2) × 10⁶ M ^?1 sec^?1, k_-2=(2.5 ± 0.6) × 10² sec^?1; Ni²⁺, k₁=(1.4 ± 0.2) × 10⁴ M ^?1 sec^?1, k_-1=(0.10 ± 0.02) sec^?1, k₂=(2.4 ± 0.3) × 10⁴ M ^?1 sec^?1, k_-2=(0.94 ± 0.17) sec^?1. It is concluded that l-tyrosine substitution reactions are normal. The presence of the phenyl hydroxyl group in l-tyrosine has no primary detectable influence on the forward rate constant, while its influence on the reverse rate constant is partially attributed to substituent effects on the basicity of the amine terminus.     

A highly selective colorimetric sensor to Fe3+ and Co2+ in aqueous solutions

Five aromatic azo dyes with hydroxyl groups (1–5) were designed and synthesized by coupling reactions. The relationships between structures of the compounds and the spectroscopic properties were investigated. The absorption spectra of these compounds upon titration with K⁺, Ca²⁺, Al³⁺, Mg²⁺, Ni²⁺, Mn²⁺, Cd²⁺, Cr³⁺, Fe³⁺, Cu²⁺, Zn²⁺, Co²⁺, Hg²⁺, and Pb²⁺ ions in neutral aqueous solutions were reported. The results are coincident with the calculation results using the density functional theory method. The high selectivity, excellent water solubility and simple synthetic process make 1-[(2-Hydroxyl)phenylazo]-2-naphthol (5) a potential sensor for sensing Fe³⁺ and Mn²⁺ with the naked eye. 1-[(2-hydroxyl)phenylazo]-2-naphthol-6-sulfonic acid (3) shows high selectivity for the colorimetric detection of Fe³⁺ and Co²⁺ among the tested metal ions. The detection limitations of 3 for determining Co²⁺ and Fe³⁺ were calculated to be 2.8 × 10^?7 and 5.6 × 10^?7 mol/L, respectively.     

Magnetochemical Complexity of Hexa‐ and Heptanuclear Wheel Complexes of Late‐3d Ions Supported by N,O‐Donor Pyridyl–Methanolate Ligands

The scaffold geometries, stability and magnetic features of the (pyridine‐2‐yl)methanolate (L) supported wheel‐shaped transition‐metal complexes with compositions [M₆L₁₂] ( 1 ), [Na?(ML₂)₆]⁺ ( 2 ), and [M′?(ML₂)₆]²⁺ ( 3 ), in which M=Co^II, Ni^II, Cu^II, and Zn^II were investigated with density functional theory (DFT). The goals of this study are manifold: 1) To advance understanding of the magnetism in the synthesized compounds [Na?(ML₂)₆]⁺ and [M′?(ML₂)₆]²⁺ that were described in Angew. Chem. Int. Ed.­ 2010 , 49, 4443 ( I ‐{Na?Ni₆}, I ‐{Ni′?Ni₆}) and Dalton Trans.­ 2011 , 40, 10526 ( II ‐{Na?Co₆}, II ‐{Co′?Co₆}); 2) To disclose how the structural, electronic, and magnetic characteristics of 1 , 2 , and 3 change upon varying M^II from d⁷ (Co²⁺) to d¹⁰ (Zn²⁺); 3) To estimate the influence of the Na⁺ and M′²⁺ ions (X^Q+) occupying the central voids of 2 and 3 on the external and internal magnetic coupling interactions in these spin structures; 4) To assess the relative structural and electrochemical stabilities of 1 , 2 , and 3 . In particular, we focus here on the net spin polarization, the determination of the strength and the sign of the exchange coupling energies, the rationalization of the nature of the magnetic coupling, and the ground‐state structures of 1 , 2 , and 3 . Our study combines the broken symmetry DFT approach and the model Hamiltonian methodology implemented in the computational framework CONDON 2.0 for the modeling of molecular spin structures, to interpret magnetic susceptibility measurements of I ‐{Na?Ni₆} and I ‐{Ni′?Ni₆}. We illustrate that whereas the structures, stability and magnetism of 1 , 2 , and 3 are indeed influenced by the nature of 3d transition‐metals in the {M₆} rims, the X^Q+ ions in the inner cavities of 2 and 3 impact these properties to an even larger degree. As exemplified by I ‐{Ni′?Ni₆}, such heptanuclear complexes exhibit ground‐state multiplets that cannot be described by simplistic model of spin‐up and spin‐down metal centers. Furthermore, we assess how future low‐temperature susceptibility measurements at high magnetic fields can augment the investigation of compound 3 with M=Co, Ni.     

THE INTERACTION OF 2-AMINO-2-HYDROXYMETHYL-1,3-PROPANEDIOL WITH COBALT(II) AND MANGANESE(II) IONS

Abstract

The stepwise complex formation between 2-amino-2-hydroxymethyl-1,3-propanediol (TRIS) with Co(II) and Mn(II) was studied by potentiometry at constant ionic strength 2.0 M (NaClO₄) and T = (25.0 ± 0.1)°C, from pH measurements. Data of average ligand number (Bjerrum's function) were obtained from such measurements followed by integration to obtain Leden's function, F ₀(L). Graphical treatment and matrix solution of simultaneous equations have shown two overall stability constants of mononuclear stepwise complexes for the Mn(II)/TRIS system (β₁ = (5.04 ± 0.02) M^?1 and β₂ = (5.4 ± 0.5) M^?2) and three for the Co(II)/TRIS system (β₁ = (1.67 ± 0.02) × 10² M^?1, β₂ = (7.01 ± 0.05) × 10³ M^?2 and β₃ = (2.4 ± 0.4) × 10⁴ M^?3). Slow spontaneous oxidation of Co(II) solutions by dissolved oxygen, accelerated by S(IV), occurs in a buffer solution TRIS/HTRIS⁺ 0.010/0.030 M, with a synergistic effect of Mn(II).     

Synthesis and evaluation of two novel rhodamine-based fluorescence probes for specific recognition of Fec+ ion

Two low cytotoxic fluorescence probes Rb1 and Rb2 detecting Fe³⁺ were synthesized and evaluated. Rb1 and Rb2 exhibited an excellent selectivity to Fe³⁺, which was not disturbed by Ag⁺, Li⁺, K⁺, Na⁺, NH₄⁺, Fe²⁺, Pb²⁺, Ba²⁺, Cd²⁺, Ni²⁺, Co²⁺, Mn²⁺, Zn²⁺, Mg²⁺, Hg²⁺, Ca²⁺, Cu²⁺, Ce³⁺, AcO^?, Br^?, Cl^?, HPO₄^2?, HSO₃^?, I^?, NO₃^?, S₂O₃^2?, SO₃^2? and SO₄^2? ions. The detection limits were 1.87 × 10^?7 M for Rb1 and 5.60 × 10^?7 M for Rb2, respectively. 1:1 stoichiometry and 1:2 stoichiometry were the most likely recognition mode of Rb1 or Rb2 towards Fe³⁺, and the corresponding OFF–ON fluorescence mechanisms of Rb1 and Rb2 were proposed.     

The stability constants of some bivalent metal complexes of α-hydroxyisobutyrate and lactate

The stability constants of the lactate and α-hydroxyisobutyrate complexes of Mn²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Pb²⁺ and UO₂²⁺ were determined by potentiometric titration. The average ligand number exceeds 2, indicating the formation of ML⁺, ML₂ and ML₃^- complexes. The existence of ML₃^- complexes was confirmed by electrophoretic experiments; no polynuclear complexes were formed. α-Hydroxyisobutyrate forms stronger complexes than lactate.     

A Lead‐Selective Membrane Electrode Based Upon a Phosphorylated Hexahomotrioxacalix[3]Arene

Solvent extraction of a mixture of Pb^II, Mn^II, Fe^III, Co^II, Ni^II and Cd^II in aqueous perchlorate medium by a phosphorylated hexahomotrioxacalix[3]arene (calix‐3) in dichloromethane shows a significant selectivity towards lead ions. The ligand can also be incorporated into a membrane to provide a new lead ion‐selective electrode (Pb^II‐ISE). A plasticized PVC membrane containing 30% PVC, 53.5% ortho‐nitrophenyloctylether (NPOE), 4.5% sodium tetraphenylborate (NaTPB) and 12% ionophore was directly coated on a graphite rod. This sensor gave a good Nernstian response of 29.7 ± 0.7 mV decade^?1 over a concentration range of 1 × 10^?8 – 1 × 10^?4 M of lead ions, independent of pH in the range 3‐7, with a detection limit of 0.4 × 10^?8 M. The dynamic response time of the electrode to achieve a steady potential was very fast and found to be less than 7 s. The selectivity relative to Ag⁺, NH₄⁺, Li⁺, Na⁺, K⁺, Ca²⁺, Sr²⁺, Ba²⁺, Mn²⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Fe³⁺, La³⁺, Sm³⁺, Dy³⁺, Er³⁺, Y³⁺ and Th⁴⁺ was examined. The electrode exhibits adequate stability with good reproducibility (with a slope of 29.6 ± 1.5 mV for 8 weeks). The characteristics of the sensor are compared with those of a tetraphosphorylated calix[4]arene (calix‐4) based Pb^II‐ISE, reported recently. The electrode was successfully used as an indicator electrode for a potentiometric titration of a lead solution using a standard solution of EDTA. The applicability of the sensor for lead ion measurements in various synthetic samples was also investigated.     

Effect of the Metal on Disulfide/Thiolate Interconversion: Manganese versus Cobalt

It has recently been proposed that disulfide/thiolate interconversion supported by transition‐metal ions is involved in several relevant biological processes. In this context, the present contribution represents a unique investigation of the effect of the coordinated metal (M) on the Mⁿ⁺?disulfide/M⁽ⁿ⁺¹⁾⁺?thiolate switch properties. Like its isostructural Co^II‐based parent compound, Co^II ₂ SS (Angew. Chem. Int. Ed.­ 2014 , 53, 5318), the new dinuclear disulfide‐bridged Mn^II complex Mn^II ₂ SS can undergo an M^II?disulfide/M^III?thiolate interconversion, which leads to the first disulfide/thiolate switch based on Mn. The coordination of iodide to the metal ion stabilizes the oxidized form, as the disulfide is reduced to the thiolate. The reverse process, which involves the reduction of M^III to M^II with the concomitant oxidation of the thiolates, requires the release of iodide. The Mn^II ₂ SS complex slowly reacts with Bu₄NI in CH₂Cl₂ to afford the mononuclear Mn^III?thiolate complex Mn^IIII . The process is much slower (ca. 16 h) and much less efficient (ca. 30 % yield) with respect to the instantaneous and quantitative conversion of Co^II ₂ SS into Co^IIII under similar conditions. This distinctive behavior can be rationalized by considering the different electrochemical properties of the involved Co and Mn complexes and the DFT‐calculated driving force of the disulfide/thiolate conversion. For both Mn and Co systems, M^II?disulfide/M^III?thiolate interconversion is reversible. However, when the iodide is removed with Ag⁺, the M^II ₂ SS complexes are regenerated, albeit much slower for Mn than for Co systems.     

Tetrazoles as ligands,part III. Transition metal complexes of 1-alkyltetrazoles

Summary Transition metal(II) tetrafluoroborates react with 1-alkyltetrazoles to give complexes with six ligands per metal ion,viz.; ML₆(BF₄)₂ with M²⁺ = Mn²⁺, Co²⁺, Ni²⁺, Cu²⁺ or Zn²⁺ and L =1-methyltetrazole (MTz), 1-ethyltetrazole (ETz) and 1-propyltetrazole (PTz). The complexes were identified and characterized by chemical analyses, i.r. and ligand field spectra. They are apparently mononuclear, containing monodentate ligands for which the Dq values are exceptionally high.     

Nuclease activity of redox/non-redox active binuclear transition metal mixed-polypyridine complexes: [M2(1,4-tpbd)(diimine)2(H2O)2]4+, M = Zn,Co, Ni,Cd, diimine = phen,bpy, dafo

Seven new transition metal complexes formulated as [M₂(1,4-tpbd)(diimine)₂(H₂O)₂]⁴⁺ [M = Zn, Co, Ni, Cd; 1,4-tpbd = N,N,N′,N′-tetrakis(2-pyridylmethyl)benzene-1,4-diamine; diimine is a N,N-donor heterocyclic base like 1,10-phenanthroline (phen), 2,2′-bipyridine (bpy), 4,5-diazafluoren-9-one (dafo)] have been synthesized and structurally characterized by X-ray crystallography: [Zn₂(1,4-tpbd)(phen)₂(H₂O)₂]⁴⁺ (1), [Zn₂(1,4-tpbd)(bpy)₂(H₂O)₂]⁴⁺ (2), [Co₂(1,4-tpbd)(phen)₂(H₂O)₂]⁴⁺ (3), [Ni₂(1,4-tpbd)(phen)₂(H₂O)₂]⁴⁺ (4), [Ni₂(1,4-tpbd)(bpy)₂(H₂O)₂]⁴⁺ (5), [Ni₂(1,4-tpbd)(dafo)₂(H₂O)₂]⁴⁺ (6) and [Cd₂(1,4-tpbd)(phen)₂(H₂O)₂]⁴⁺ (7). Single crystal diffraction reveals that the metals in the complexes are all in a distorted octahedral geometry. The interactions of the seven complexes with calf thymus DNA (CT-DNA) have been investigated by UV absorption, fluorescence, circular dichroism spectroscopy and viscosity measurements. The apparent binding constants (K_app) are calculated to be 5.2?×?10⁵ M^?1 for 1, 1.05?×?10⁵ M^?1 for 2, 5.76?×?10⁵ M^?1 for 3, 4.57?×?10⁵ M^?1 for 4, 1.29?×?10⁵ M^?1 for 5, 1.7?×?10⁵ M^?1 for 6, 2.53?×?10⁵ M^?1 for 7, the binding propensity to the calf thymus DNA in the order: 3 (Co-phen) > 1 (Zn-phen) > 4 (Ni-phen) > 7 (Cd-phen) > 6 (Ni-dafo) > 5 (Ni-bpy) > 2 (Zn-bpy). Furthermore, these complexes display efficient oxidative cleavage of supercoiled DNA; the Zn(II)/H₂O₂ and Cd(II)/H₂O₂ systems efficiently cleave DNA attributed to the peroxide ion coordinated to the Zn(II) and Cd(II), which enhanced their nucleophilicity, this is rare.     

Complexation of metal ions with the novel diazadithia crown ether carrying two anthryl pendants in acetonitrile–tetrahydrofuran

A new crown ether carrying two anthryl groups with nitrogen–sulfur donor atom was designed and synthesized by the reaction of the corresponding macrocyclic compound and 9-chloromethyl anthracene. The influence of metal cations such as Al³⁺, Zn²⁺, Fe²⁺, Fe³⁺, Co²⁺, Ni²⁺, Mn²⁺, Cu²⁺, Cd²⁺, Hg²⁺ and Pb²⁺ on the spectroscopic properties of the ligand was investigated in acetonitrile–tetrahydofuran solution (1/1) by means of absorption and emission spectrometry. Absorption spectra show isosbestic points in the spectrophotometric titration of Fe²⁺, Fe³⁺, Al³⁺, Cu²⁺ and Hg²⁺. The results of spectrophotometric titration experiments disclosed the complexation stoichiometry and complex stability constant of the novel ligand with Fe²⁺, Fe³⁺, Al³⁺, Cu²⁺and Hg²⁺cations. The presence of excess amounts of Al³⁺, Zn²⁺, Fe²⁺, Fe³⁺, Co²⁺, Ni²⁺, Mn²⁺, Cu²⁺, Cd²⁺, Hg²⁺ and Pb²⁺ cations caused an enhancement of anthryl fluorescence. The ligand showed good sensitivity for Zn²⁺ with respect to other metal cations with linear range and detection limit of 1.4 × 10^?7 to 4.1 × 10^?6 M and 1.0 × 10^?8 M respectively.     

Synergistic extraction of some divalent cations into nitrobenzene by using strontium dicarbollylcobaltate and hexaethyl p- tert-butylcalix[6]arene hexaacetate

From extraction experiments and γ-activity measurements, the exchange extraction constants corresponding to the general equilibrium M²⁺ (aq) + SrL²⁺ (nb) $ \Leftrightarrow $ ML²⁺ (nb) + Sr²⁺ (aq) taking place in the two-phase water–nitrobenzene system (M²⁺ = Ca²⁺, Pb²⁺, Cu²⁺, Zn²⁺, Cd²⁺, $ {\text{UO}}_{2}^{2 + } $ , Mn²⁺, Co²⁺, Ni²⁺; L = hexaethyl p-tert-butylcalix[6]arene hexaacetate; aq = aqueous phase, nb = nitrobenzene phase) were evaluated. Moreover, the stability constants of the ML²⁺ complexes in nitrobenzene saturated with water were calculated; they were found to increase in the following order: Cd²⁺ < Ca²⁺ < Mn²⁺ < Cu²⁺, Zn²⁺ <  $ {\text{UO}}_{2}^{2 + } $ , Co²⁺ < Ni²⁺ < Sr²⁺ < Pb²⁺.     

High-capacity Li(Ni0.5Co0.2Mn0.3)O2 lithium-ion battery cathode synthesized using a green chelating agent

Quasi-spherical (Ni_0.5Co_0.2Mn_0.3)(OH)₂ precursor is prepared via a continuous hydroxide co-precipitation method using sodium lactate as the green chelating agent. A layered structure Li(Ni_0.5Co_0.2Mn_0.3)O₂ is synthesized by calcining the mixture of as-prepared precursor and Li₂CO₃ in air. X-ray photoelectron spectroscopy (XPS) indicates that Ni, Co, and Mn exist in the oxidation states of +2/+3, +3 and +4, respectively. The influence of calcination temperature on the structural, morphological, electrochemical properties of Li(Ni_0.5Co_0.2Mn_0.3)O₂ oxides are investigated in detail. As a result, the sample calcined at 850 °C shows excellent electrochemical performance, which could be ascribed to its good crystal structure, low cation disorder, appropriate crystallinity. This sample delivers an initial discharge capacity of 192.6 mA h g^?1 with a coulombic efficiency of 89.5 % at a current density of 20 mA g^?1, and exhibits good rate capability and stable cyclability. Finally, the electrochemical performance of the sodium lactate-derived sample is briefly compared with those of the oxalic acid-derived and ammonia-derived oxide.     

LiMO<Subscript>2</Subscript>@Li<Subscript>2</Subscript>MnO<Subscript>3</Subscript> positive-electrode material for high energy density lithium ion batteries

Li[Ni_1/3Co_1/3Mn_1/3]O₂ (NCM 111) is a promising alternative to LiCoO₂, as it is less expensive, more structurally stable, and has better safety characteristics. However, its capacity of 155 mAh g^?1 is quite low, and cycling at potentials above 4.5 V leads to rapid capacity deterioration. Here, we report a successful synthesis of lithium-rich layered oxides (LLOs) with a core of LiMO₂ (R-3m, M?=?Ni, Co) and a shell of Li₂MnO₃ (C2/m) (the molar ratio of Ni, Co to Mn is the same as that in NCM 111). The core–shell structure of these LLOs was confirmed by XRD, TEM, and XPS. The Rietveld refinement data showed that these LLOs possess less Li⁺/Ni²⁺ cation disorder and stronger M*–O (M*?=?Mn, Co, Ni) bonds than NCM 111. The core–shell material Li_1.15Na_0.5(Ni_1/3Co_1/3)_core(Mn_1/3)_shellO₂ can be cycled to a high upper cutoff potential of 4.7 V, delivers a high discharge capacity of 218 mAh g^?1 at 20 mA g^?1, and retains 90 % of its discharge capacity at 100 mA g^?1 after 90 cycles; thus, the use of this material in lithium ion batteries could substantially increase their energy density.

Open image in new window

Graphical Abstract Average voltage vs. number of cycles for the core–shell and pristine materials at 20 mA g^?1 for 10 cycles followed by 90 cycles at 100 mA g^?1

     

A new Schiff base fluorescent indicator for the detection of Mg<Superscript>2+</Superscript> and its application to real samples

A new Schiff base fluorescence probe, 3-Allylsalicylaldehyde salicylhydrazone (L), for Mg²⁺ was designed and synthesized. The fluorescence of the sensor L was enhanced remarkably by Mg²⁺ with 2:1 binding ratio, and the binding constant was determined to be 1.02 × 10⁷ M^?1. Probe L had high sensitivity for Mg²⁺ in a solution of DMF/water (4:1, v/v, pH 7.5), and the detection limit was 4.88 × 10^?8 mol/L. Common coexistent metal ions, such as K⁺, Na⁺, Ag⁺, Ca²⁺, Zn²⁺, Ba²⁺, Bi²⁺, Cu²⁺, Ni²⁺, Hg²⁺, Fe³⁺ , and Al³⁺, showed little or no interference on the detection of Mg²⁺ in solution. The fluorescence probe L, which was successfully used for the determination of trace Mg(II) in real samples, was shown to be promising for liquid-phase extraction coupled with fluorescence spectra.     

A rapid selective colorimetric and ‘On–Off’ fluorimetric sensor for detecting Cu2+ ions in aqueous media based on a simple bis-schiff-base derivative

A simple colorimetric and fluorimetric ‘On–Off’ sensor L (3,3′-dimethyl -[1,1′-biphenyl]-4,4′-diyl)bis(azanylylidene)bis(methanylylidene)bis(naphthalen-2-ol) for Cu²⁺ ions bearing o-tolidine substituents has been designed and synthesised, and exhibits significant fluorimetric and colorimetric response for Cu²⁺ in DMSO/H₂O (8:2, v/v) HEPES buffer (pH 7.2) solution. The detection limit of the sensor towards Cu²⁺ is 7.25 × 10^? 8 M and the association constant K_a of 9.86 × 10⁴ M^? 1 was determined. Furthermore, other anions, including Fe³⁺, Hg²⁺, Ag⁺, Ca²⁺, Co²⁺, Ni²⁺, Cd²⁺, Pb²⁺, Zn²⁺, Cr³⁺ and Mg²⁺ have almost no influence on the probe's behaviour. Test strips based on the sensor L were fabricated, which could act as convenient and efficient Cu²⁺ test kits.     

以[M(DETA)2)]n+(M=Cu2+, Ni2+, Co3+)为客体的MnPS3夹层化合物的合成、结构表征与磁性研究

将过渡金属配合物阳离子([M(DETA)₂]ⁿ⁺(M=Cu²⁺,Ni²⁺,Co³⁺;DETA=Diethylenetriamine,二乙烯三胺)作为客体插入层状MnPS₃层间得到了相应的3个夹层化合物。通过X-射线粉末衍射、元素分析和红外光谱对夹层化合物的结构进行了表征。结果表明,与主体MnPS₃ 0.65 nm的层间距相比较,夹层化合物(Mn_0.88PS₃[Cu(DETA)₂]_0.12)的层间距扩大了0.32 nm,由此推测客体[Cu(DETA)₂]²⁺在层间以平面四方的配位形式存在,而另2个夹层化合物(Mn_0.79PS₃[Ni(DETA)₂]_0.21和Mn_0.74PS₃[Co(DETA)₂]_0.17)的层间距扩大了0.48 nm,说明客体[(M(DETA)₂]ⁿ⁺,M=Co³⁺,Ni²⁺) 在主体层间以八面体配位形式存在。磁性测试结果表明过渡金属离子[(M(DETA)₂]ⁿ⁺(M=Cu²⁺,Co³⁺)的插入能引起主体MnPS₃的磁性在35~40 K发生由顺磁向亚铁磁性的转变并表现自发磁化,而客体[Ni(DETA)₂]²⁺却使夹层化合物的反铁磁相互作用增强,抑制了自发磁化的发生。     

Influence of preparation method on structure, morphology, and electrochemical performance of spherical Li[Ni0.5Mn0.3Co0.2]O2

Spherical Li[Ni_0.5Mn_0.3Co_0.2]O₂ was prepared by both the continuous hydroxide co-precipitation method and continuous carbonate co-precipitation method under different calcined temperatures. The physical properties and electrochemical behaviors of Li[Ni_0.5Mn_0.3Co_0.2]O₂ prepared by two methods were characterized by X-ray diffraction, scanning electron microscope, and electrochemical measurements. It has been found that different preparation methods will result in the differences in the morphology (shape, particle size, and tap density), structure stability, and the electrochemical characteristics (shape of initial charge/discharge curve, cycle stability, and rate capability) of the final product Li[Ni_0.5Mn_0.3Co_0.2]O₂. The physical and electrochemical properties of the spherical Li[Ni_0.5Mn_0.3Co_0.2]O₂ prepared by continuous hydroxide co-precipitation is apparently superior to the one prepared by continuous carbonate co-precipitation method. The optimal sample prepared by continuous hydroxide co-precipitation at 820 °C exhibits a hexagonally ordered layer structure, high special discharge capacity, good capacity retention, and excellent rate capability. It delivers high initial discharge capacity of 175.2 mAh g^?1 at 0.2 C rate between 3.0 and 4.3 V, and the capacity retention of 98.8 % can be maintained after 50 cycles. While the voltage range is broadened up to 2.5 and 4.6 V vs. Li⁺/Li, the special discharge capacities at 0.2 C, 0.5 C, 1 C, 2 C, 5 C, and 10 C rates are as high as 214.3, 205.0, 198.3, 183.3, 160.1 and 135.2 mAh g^?1, respectively.     

Coating of Al2O3 on layered Li(Mn1/3Ni1/3Co1/3)O2 using CO2 as green precipitant and their improved electrochemical performance for lithium ion batteries

Li(Mn_1/3Ni_1/3Co_1/3)O₂ cathode materials were fabricated by a hydroxide precursor method. Al₂O₃ was coated on the surface of the Li(Mn_1/3Ni_1/3Co_1/3)O₂ through a simple and effective one-step electrostatic self-assembly method. In the coating process, a NHCO₃-H₂CO₃ buffer was formed spontaneously when CO₂ was introduced into the NaAlO₂ solution. Compared with bare Li(Mn_1/3M_1/3Co_1/3)O₂, the surface-modified samples exhibited better cycling performance, rate capability and rate capability retention. The Al₂O₃-coated Li(Mn_1/3Ni_1/3Co_1/3)O₂ electrodes delivered a discharge capacity of about 115 mAh·g^?1 at 2 A·g^?1, but only 84 mAh·g^?1 for the bare one. The capacity retention of the Al₂O₃-coated Li(Mn_1/3Ni_1/3Co_1/3)O₂ was 90.7% after 50 cycles, about 30% higher than that of the pristine one.     

Sn-doped Li<Subscript>1.2</Subscript>Mn<Subscript>0.54</Subscript>Ni<Subscript>0.13</Subscript>Co<Subscript>0.13</Subscript>O<Subscript>2</Subscript> cathode materials for lithium-ion batteries with enhanced electrochemical performance

Sn-doped Li-rich layered oxides of Li_1.2Mn_0.54-x Ni_0.13Co_0.13Sn _x O₂ have been synthesized via a sol-gel method, and their microstructure and electrochemical performance have been studied. The addition of Sn⁴⁺ ions has no distinct influence on the crystal structure of the materials. After doped with an appropriate amount of Sn⁴⁺, the electrochemical performance of Li_1.2Mn_0.54-x Ni_0.13Co_0.13Sn _x O₂ cathode materials is significantly enhanced. The optimal electrochemical performance is obtained at x = 0.01. The Li_1.2Mn_0.53Ni_0.13Co_0.13Sn_0.01O₂ electrode delivers a high initial discharge capacity of 268.9 mAh g^?1 with an initial coulombic efficiency of 76.5% and a reversible capacity of 199.8 mAh g^?1 at 0.1 C with capacity retention of 75.2% after 100 cycles. In addition, the Li_1.2Mn_0.53Ni_0.13Co_0.13Sn_0.01O₂ electrode exhibits the superior rate capability with discharge capacities of 239.8, 198.6, 164.4, 133.4, and 88.8 mAh g^?1 at 0.2, 0.5, 1, 2, and 5 C, respectively, which are much higher than those of Li_1.2Mn_0.54Ni_0.13Co_0.13O₂ (196.2, 153.5, 117.5, 92.7, and 43.8 mAh g^?1 at 0.2, 0.5, 1, 2, and 5 C, respectively). The substitution of Sn⁴⁺ for Mn⁴⁺ enlarges the Li⁺ diffusion channels due to its larger ionic radius compared to Mn⁴⁺ and enhances the structural stability of Li-rich oxides, leading to the improved electrochemical performance in the Sn-doped Li_1.2Mn_0.54Ni_0.13Co_0.13O₂ cathode materials.