Benzo-12-crown-4 modified N-heterocyclic carbene for organocatalyst: Synthesis,characterization and degradation of block copolymers of ϵ-caprolactone with L-lactide

A set of poly(L-lactide)-poly(?-caprolactone) diblock copolymers (AB) and poly(L-lactide)-poly(?-caprolactone)-poly(L-lactide) triblock copolymers (ABA) with predictable molecular weights and relatively narrow distributions were synthesized by ring-opening polymerization of successively added ?-caprolactone (?-CL) and L-lactide (LLA) using 4-methyl benzo-12-crown-4 imidazol-2-ylidene as catalyst. The effects of polymerization conditions, such as reaction time, temperature, monomer/catalyst molar ratio and monomer concentration on the copolymerization have been discussed in detail. The resulting copolymers were characterized by ¹H-NMR, ¹³C-NMR, IR, GPC and DSC methods which confirmed the successful synthesis of block copolymers of LLA and ?-CL. Hydrolytic degradation of the polymers showed that the PLLA-PCL-PLLA copolymer exhibited faster degradation as compared with the PCL homopolymer in alkaline medium at 37°C.     

Synthesis of polyethylene hybrid copolymers containing polyhedral oligomeric silsesquioxane prepared with ring‐opening metathesis copolymerization

Ring‐opening metathesis copolymerizations of cyclooctene and the polyhedral oligomeric silsesquioxane (POSS) monomer 1‐[2‐(5‐norbornen‐2‐yl)ethyl]‐3,5,7,9,11,13,15‐heptacyclopentylpentacyclo[9.5.1.1^3,9.1^5,15.1^7,13] octasiloxane (POSS–norbornylene) were performed with Grubbs's catalyst, RuCl₂(?CHPh)(PCy₃)₂. Random copolymers were formed and fully characterized with POSS loadings as high as 55 wt %. Diimide reduction of these copolymers afforded polyethylene–POSS random copolymers. Thermogravimetric analysis of the polyethylene–POSS copolymers under air showed a 70 °C improvement, relative to a polyethylene control sample of similar molecular weight, in the onset of decomposition temperature based on 5% mass loss. The homopolymer of POSS–norbornylene was also synthesized. This polymer had a rigid backbone according to ¹H NMR evidence of broad olefinic signals. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2920–2928, 2001     

Homopolymer and copolymers of 4-nitro-3-methylphenyl methacrylate with glycidyl methacrylate: Synthesis, characterization, monomer reactivity ratios and thermal properties

The novel methacrylic monomer, 4-nitro-3-methylphenyl methacrylate (NMPM) was synthesized by reacting 4-nitro-3-methylphenol dissolved in ethyl methyl ketone (EMK) with methacryloyl chloride in the presence of triethylamine as a catalyst. The homopolymer and copolymers of NMPM with glycidyl methacrylate having different compositions were synthesized by free radical polymerization in EMK solution at 70 ± 1 °C using benzoyl peroxide as free radical initiator. The homopolymer and the copolymers were characterized by FT-IR, ¹H NMR and ¹³C NMR spectroscopic techniques. The solubility tests were tested in various polar and non-polar solvents. The molecular weight and polydispersity indices of the copolymers were determined using gel permeation chromatography. The glass transition temperature of the copolymers increases with increase in NMPM content. The thermogravimetric analysis of the polymers performed in air showed that the thermal stability of the copolymer increases with NMPM content. The copolymer composition was determined using ¹H NMR spectra. The monomer reactivity ratios were determined by the application of conventional linearization methods such Fineman-Ross (r₁ = 1.862, r₂ = 0.881), Kelen-Tudos (r₁ = 1.712, r₂ = 0.893) and extended Kelen-Tudos methods (r₁ = 1.889, r₂ = 0.884).     

Synthesis and characterization of 6-[4-(trans -4-pentylcyclohexyl)phenoxy]hexyl acrylate homopolymer and copolymers

The compound 6-[4-(trans -4-pentylcyclohexyl)phenoxy]hexyl acrylate (2) was prepared and homopolymerized. The block copolymer and copolymer of 2 with styrene were synthesized by photopolymerization and solution techniques, respectively. These polymers were characterized by IR and ¹H NMR spectra and size exclusion chromatography. Polarizing optical microscopy (POM) and X-ray diffraction (XRD) studies revealed that these polymers exhibited smectic A (SmA) phases. POM showed that the homopolymer showed a higher order SmA phase than did the block copolymer and copolymer. After magnetically forced alignment the samples exhibited similar optical texture but the domain size of the liquid crystalline phase increased. Differential scanning calorimetry, POM and XRD data suggest that the SmA domain size decreased in the order hompolymer > block copolymer > copolymer.     

Free radical copolymerization of sulfur dioxide with phenylacetylene

Free radical copolymerization of sulfur dioxide with phenylacetylene (PA) in o-dichlorobenzene was studied in a range of temperatures from 30 to 80^oC as a function of total monomer concentration ([SO₂] + [PA]). PA content in the copolymers increases with decreasing total monomer concentration and increasing temperature. M _w/M _n becomes sharper with decreasing the total monomer concentration, but does not depend upon feed compositions which are changed keeping total monomer concentration constant at 2, 4, and 6 mol/L, respectively. These results strongly indicate the existence of depropagation. Thermal decomposition of the copolymers happens more easily than PA homopolymer and the carbon-centered free radicals are detected during the decomposition. Reactivity of ～ CH??(Ph) free radical (～ PA · ) is also discussed.     

Synthesis of poly[arylene ether sulfone-b-vinylidene fluoride] block copolymers

A series of α,ω-dihydroxy polyarylene sulfones (PAES) were synthesized comprising bisphenol A (PAES1, M_n=1800, 4900, and 9500 daltons), 4,4^′-biphenol (PAES2, M_n=4100 daltons), and hexafluorobisphenol A (PAES3, M_n=3300 daltons). These were reacted with α,ω-dibromo poly(vinylidene fluoride) (PVDF, M_n=1200 daltons) prepared by telomerization, to yield block copolymers possessing rigid and flexible segments. Block copolymers were characterized by FTIR, NMR, GPC, DSC, TGA and TEM. In several cases the block copolymers exhibited distinct thermal transitions, i.e. T_m and T_g for PVDF and PAES segments, respectively. Where observable, T_g of PAES domains in the block copolymers occurred at a temperature lower than the corresponding PAES homopolymer due to the flexible nature of the surrounding PVDF domains. Block copolymers exhibited a similar thermal stability to the corresponding PAES homopolymers but higher stability than the PVDF homopolymer, and much higher still than α,ω-dibromo PVDF. TEM analyses indicate that phase separation of PAES and PVDF domains occurs on the nanometer scale.     

Self-assembly of amphiphilic liquid crystal polymers obtained from a cyclopropane-1,1-dicarboxylate bearing a cholesteryl mesogen

We study the self-assembly of a new family of amphiphilic liquid crystal (LC) copolymers synthesized by the anionic ring-opening polymerization of a new cholesterol-based LC monomer, 4-(cholesteryl)butyl ethyl cyclopropane-1,1-dicarboxylate. Using the t-BuP(4) phosphazene base and thiophenol or a poly(ethylene glycol) (PEG) functionalized with thiol group to generate in situ the initiator during the polymerization, LC homopolymer and amphiphilic copolymers with narrow molecular weight distributions were obtained. The self-assemblies of the LC monomer, homopolymer, and block copolymers in bulk and in solution were studied by small-angle X-ray scattering (SAXS), differential scanning calorimetry (DSC), polarizing optical microscopy (POM), and transmission electron microscopy (TEM). All polymers exhibit in bulk an interdigitated smectic A (SmA(d)) phase with a lamellar period of 4.6 nm. The amphiphilic copolymers self-organize in solution into vesicles with wavy membrane and nanoribbons with twisted and folded structures, depending on concentration and size of LC hydrophobic block. These new morphologies will help the comprehension of the fascinating organization of thermotropic mesophase in lyotropic structures.     

Diels‐alder click reaction for the preparation of polycarbonate block copolymers

The Diels‐Alder reaction as a click reaction strategy is applied to the preparation of well‐defined polycarbonate (PC)‐block copolymers. A well‐defined α‐anthracene‐terminated polycarbonate (PC‐anthracene) is prepared using 9‐anthracene methanol as an initiator in the ring opening polymerization of benzyl 5‐methyl‐2‐oxo‐1,3‐dioxane‐5‐carboxylate in CH₂Cl₂ at room temperature for 5 h. Next, a well‐defined α‐furan protected maleimide‐terminated‐poly(ethylene glycol) (PEG₁₁‐MI or PEG₃₇‐MI), ‐poly(methyl methacrylate) (PMMA₂₆‐MI), and ‐poly(ε‐caprolactone) (PCL₂₇‐MI) were clicked with the PC‐anthracene at reflux temperature of toluene to yield their corresponding PC‐based block copolymers (PC‐b‐PEG, PC‐b‐PMMA, and PC‐b‐PCL). The homopolymer precursors and their block copolymers were characterized by using the GPC, NMR and UV analysis. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis and Characterization of Novel Aliphatic Poly(carbonate‐ester)s with Functional Pendent Groups

Summary: A novel cyclic carbonate monomer 5‐methyl‐5‐(succinimide‐N‐oxycarbonyl)‐1,3‐dioxan‐2‐one (MSTC) was prepared. The copolymers of MSTC with caprolactone (CL) were further synthesized by ring‐opening copolymerization. The copolymers with amido‐amine pendent groups were obtained by aminolysis of poly(MSTC‐co‐CL) with ethylenediamine. These copolymers were characterized by IR, ¹H NMR, ¹³C NMR spectroscopies and GPC. The hydrophilicity and degradability of the copolymers with amido‐amine pendent groups were greatly improved in comparison with the PCL homopolymer.

Hydrophilicity of PCL (1), poly(MATC‐co‐CL) (16.5:83.5) (2), and poly(MATC‐co‐CL) (29.5:70.5) (3).     

Multiarm star block and multiarm star mixed‐block copolymers via azide‐alkyne click reaction

The synthesis of multiarm star block (and mixed‐block) copolymers are efficiently prepared by using Cu(I) catalyzed azide‐alkyne click reaction and the arm‐first approach. α‐Silyl protected alkyne polystyrene (α‐silyl‐alkyne‐PS) was prepared by ATRP of styrene (St) and used as macroinitiator in a crosslinking reaction with divinyl benzene to successfully give multiarm star homopolymer with alkyne periphery. Linear azide end‐functionalized poly(ethylene glycol) (PEG‐N₃) and poly (tert‐butyl acrylate) (PtBA‐N₃) were simply clicked with the multiarm star polymer described earlier to form star block or mixed‐block copolymers in N,N‐dimethyl formamide at room temperature for 24 h. Obtained multiarm star block and mixed‐block copolymers were identified by using ¹H NMR, GPC, triple detection‐GPC, atomic force microscopy, and dynamic light scattering measurements. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 99–108, 2010     

Synthesis of multiblock hyperbranched‐linear poly(ether sulfone) copolymers

Hyperbranched poly(ether sulfone) was prepared in the presence of an oligomeric linear poly(ether sulfone) to generate multiblock hyperbranched‐linear (LxHB) copolymers. The LxHB copolymers were prepared in a two‐step, one‐pot synthesis by first polymerizing AB monomer to generate a linear block of a desired molecular weight followed by addition of the AB₂ monomer in a large excess (19:1, AB₂:AB) to generate the hyperbranched block. NMR integration analysis indicates that AB₂:AB ratio is independent of the reaction time. Because the molecular weight still increases with reaction time, these results suggest that polymer growth continues after consumption of monomer by condensation into a multiblock architecture. The LxHB poly(ether sulfone)s have better thermal stability (10% mass loss > 343 vs. 317 °C) and lower T_g (200 vs. > 250 °C) than the hyperbranched homopolymer, higher T_g than the linear homopolymer (<154 °C), while little difference in the solubility character was observed between the two polymers. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4785–4793, 2008     

Hydrophilic–hydrophobic AB diblock copolymers containing poly(trimethylene carbonate) and poly(ethylene oxide) blocks

AB‐type block copolymers with poly(trimethylene carbonate) [poly(TMC); A] and poly(ethylene oxide) [PEO; B; number‐average molecular weight (M_n) = 5000] blocks [poly(TMC)‐b‐PEO] were synthesized via the ring‐opening polymerization of trimethylene carbonate (TMC) in the presence of monohydroxy PEO with stannous octoate as a catalyst. M_n of the resulting copolymers increased with increasing TMC content in the feed at a constant molar ratio of the monomer to the catalyst (monomer/catalyst = 125). The thermal properties of the AB diblock copolymers were investigated with differential scanning calorimetry. The melting temperature of the PEO blocks was lower than that of the homopolymer, and the crystallinity of the PEO block decreased as the length of the poly(TMC) blocks increased. The glass‐transition temperature of the poly(TMC) blocks was dependent on the diblock copolymer composition upon first heating. The static contact angle decreased sharply with increasing PEO content in the diblock copolymers. Compared with poly(TMC), poly(TMC)‐b‐PEO had a higher Young's modulus and lower elongation at break. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4819–4827, 2005     

Synthesis and characterization of amphiphilic fluorinated pentablock copolymers based on Pluronic F127

The synthesis and self‐assembly behavior of pentablock copolymers consisting of Pluronic F127 (PEO₁₀₀‐PPO₆₅‐PEO₁₀₀) and poly(2, 2, 3, 3, 4, 4, 5, 5‐octafluoropentyl methacrylate) (POFPMA) is herein described. Using the difunctional potassium alcoholate of F127, K⁺O^–‐(PEO₁₀₀‐PPO₆₅‐PEO₁₀₀)‐O^–K⁺, as the macroinitiator, the POFPMA‐F127‐POFPMA pentablock copolymers were synthesized via oxyanion‐initiated polymerization. The chain length of POFPMA can be controlled by the original molar ratio of macroinitiator to OFPMA monomer, that is, F‐monomer. The composition and chemical structure of POFPMA‐F127‐POFPMA pentablock copolymers have been characterized by FTIR, ¹HNMR, and ¹⁹F NMR spectroscopy, and gel permeation chromatography techniques. The solution behavior of POFPMA‐F127‐POFPMA copolymers was investigated by the methods of surface tension, cloud point, transmission electron microscopy, and high performance particle sizer (HPPS). The results indicate that these Pluronic F127‐based block copolymers modified with fluorinated segments possess relatively high surface activity and low cloud points, depending on various factors, such as the length of fluorinated block, the concentration of the copolymers in aqueous solution, and the adscititious inorganic salt. TEM measurements showed that the pentablock copolymers can self‐assemble in aqueous solution to form various micellar morphologies. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3029–3041, 2008     

Latices of poly(fluoroalkyl mathacrylate)‐b‐poly(butyl methacrylate) copolymers prepared via reversible addition–fragmentation chain transfer polymerization

Poly(fluoroalkyl mathacrylate)‐block‐poly(butyl methacrylate) diblock copolymer latices were synthesized by a two‐step process. In the first step, a homopolymer end‐capped with a dithiobenzoyl group [poly(fluoroalkyl mathacrylate) (PFAMA) or poly(butyl methacrylate) (PBMA)] was prepared in bulk via reversible addition–fragmentation chain transfer (RAFT) polymerization with 2‐cyanoprop‐2‐yl dithiobenzoate as a RAFT agent. In the second step, the homopolymer chain‐transfer agent (macro‐CTA) was dissolved in the second monomer, mixed with a water phase containing a surfactant, and then ultrasonicated to form a miniemulsion. Subsequently, the RAFT‐mediated miniemulsion polymerization of the second monomer (butyl methacrylate or fluoroalkyl mathacrylate) was carried out in the presence of the first block macro‐CTA. The influence of the polymerization sequence of the two kinds of monomers on the colloidal stability and molecular weight distribution was investigated. Gel permeation chromatography analyses and particle size results indicated that using the PFAMA macro‐CTA as the first block was better than using the PBMA RAFT agent with respect to the colloidal stability and the narrow molecular weight distribution of the F‐copolymer latices. The F‐copolymers were characterized with ¹H NMR, ¹⁹F NMR, and Fourier transform infrared spectroscopy. Comparing the contact angle of a water droplet on a thin film formed by the fluorinated copolymer with that of PBMA, we found that for the diblock copolymers containing a fluorinated block, the surface energy decreased greatly, and the hydrophobicity increased. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 471–484, 2007     

Atom transfer radical polymerization of acrylates in an ionic liquid: Synthesis of block copolymers

Atom transfer radical polymerization (ATRP) of acrylates in ionic liquid, 1‐butyl‐3‐methylimidazolium hexaflurophospate, with the CuBr/CuBr₂/amine catalytic system was investigated. Sequential polymerization was performed by synthesizing AB block copolymers. Polymerization of butyl acrylate (monomer that is only partly soluble in an ionic liquid forming a two‐phase system) proceeded to practically quantitative conversion. If the second monomer (methyl acrylate) is added at this stage, polymerization proceeds, and block copolymer formed is essentially free of homopolymer according to size exclusion chromatographic analysis. The number‐average molecular weight of the copolymer is slightly higher than calculated, but the molecular weight distribution is low (M_w/M_n = 1.12). If, however, methyl acrylate (monomer that is soluble in an ionic liquid) is polymerized at the first stage, then butyl acrylate in the second‐stage situation is different. Block copolymer free of homopolymer of the first block (with M_w/M_n = 1.13) may be obtained only if the conversion of methyl acrylate at the stage when second monomer is added is not higher than 70%. Matrix‐assisted laser desorption/ionization time‐of‐flight analysis confirmed that irreversible deactivation of growing macromolecules is significant for methyl acrylate polymerization at a monomer conversion above 70%, whereas it is still not significant for butyl acrylate even at practically quantitative conversion. These results show that ATRP of butyl acrylate in ionic liquid followed by addition of a second acrylate monomer allows the clean synthesis of block copolymers by one‐pot sequential polymerization even if the first stage is carried out to complete conversion of butyl acrylate. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2799–2809, 2002     

Fire and Forget! One‐Shot Synthesis and Characterization of Block‐Like Statistical Terpolymers via Living Anionic Polymerization

Diphenylethylene (DPE) is a monomer which has attracted significant interest from academia and industry both in terms of copolymerization kinetics and for the potential to extend and tune the range of glass transition temperatures accessible for DPE‐containing copolymers. DPE can undergo (co)polymerization with a variety of other monomers by living anionic polymerization but is incapable of forming a homopolymer due to steric hindrance. DPE, being a sterically bulky monomer, results in dramatic increases in the glass transition temperature (T_g) of resulting copolymers, with a perfectly alternating copolymer of styrene and DPE having a T_g of ~180 °C. Herein we report for the first time, the outcome of the statistical terpolymerization of butadiene, styrene, and DPE—a one‐pot, one‐shot, commercially scalable reaction using monomers of wide industrial importance. This extremely facile approach produces copolymers with a block‐like structure, which undergo microphase separation, possess a high T_g glassy “block” and are virtually indistinguishable from analogous block terpolymers made by the traditional sequential addition of monomers approach. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 382–394     

Modification of styrene polymer with organosilicon groups

The homopolymer of 4‐chloromethylstyrene (P1) and its copolymers with styrene (in various mole ratios) were synthesized by bulk and solution free radical polymerizations, respectively, at 70 ± 1°C using α,α′‐azobis(isobutyronitrile) as an initiator. Lithiation of these soluble polymers in THF at −78°C was done and reacted with electrophiles such as tert‐BuMe₂Si, Et₃Si, and Me₃SiCH₂ in the presence of 4,4′‐di‐tert‐butylbiphenyl (DTBB) as a catalyst to produce modified polystyrene. In the other way, trimethylsilylmethyl lithium substitute as a nucleophile was covalently linked to the homopolymer and copolymer. The polymers were characterized by IR, ¹H NMR, ¹³C NMR, differential scanning calorimetry (DSC), and gel permeation chromatography. DSC showed that incorporation of silyl substitute in the side chains of homopolymer and copolymers increases the rigidity of the polymers and, subsequently, their glass transition temperature. © 2007 Wiley Periodicals, Inc. Heteroatom Chem 18:414–420, 2007; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20314     

A Useful Method for Preparing Mixed Brush Polymer Grafted Nanoparticles by Polymerizing Block Copolymers from Surfaces with Reversed Monomer Addition Sequence

The preparation of well‐defined block copolymers using controlled radical polymerization depends on the proper order of monomer addition. The reversed order of monomer addition results in a mixture of block copolymer and homopolymer and thus has typically been avoided. In this paper, the low blocking efficiency of reversed monomer addition order is utilized in combination with surface initiated reversible addition−fragmentation chain‐transfer polymerization to establish a facile procedure toward mixed polymer brush grafted nanoparticles SiO₂‐g‐(PS (polystyrene), PS‐b‐PMAA (polymethacrylic acid)). The SiO₂‐g‐(PS, PS‐b‐PMAA) nanoparticles are analyzed by gel permeation chromatography deconvolution, and the fraction of each polymer component is calculated. Additionally, the SiO₂‐g‐(PS, PS‐b‐PMAA) are amphiphilic in nature and show unique self‐assembly behavior in water.     

Synthesis of degradable and chemically recyclable polymers using 4,4-disubstituted five-membered cyclic ketene hemiacetal ester (CKHE) monomers

Novel degradable and chemically recyclable polymers were synthesized using five-membered cyclic ketene hemiacetal ester (CKHE) monomers. The studied monomers were 4,4-dimethyl-2-methylene-1,3-dioxolan-5-one (DMDL) and 5-methyl-2-methylene-5-phenyl-1,3-dioxolan-4-one (PhDL). The two monomers were synthesized in high yields (80–90%), which is an attractive feature. DMDL afforded its homopolymer with a relatively high molecular weight (M_n >100 000, where M_n is the number-average molecular weight). DMDL and PhDL were copolymerized with various families of vinyl monomers, i.e., methacrylates, acrylates, styrene, acrylonitrile, vinyl pyrrolidinone, and acrylamide, and various functional methacrylates and acrylate. Such a wide scope of the accessible polymers is highly useful for material design. The obtained homopolymers and random copolymers of DMDL degraded in basic conditions (in the presence of a hydroxide or an amine) at relatively mild temperatures (room temperature to 65 °C). The degradation of the DMDL homopolymer generated 2-hydroxyisobutyric acid (HIBA). The generated HIBA was recovered and used as an ingredient to re-synthesize DMDL monomer, and this monomer was further used to re-synthesize the DMDL polymer, demonstrating the chemical recycling of the DMDL polymer. Such degradability and chemical recyclability of the DMDL polymer may contribute to the circular materials economy.

Novel degradable and chemically recyclable polymers were synthesized using five-membered cyclic ketene hemiacetal ester (CKHE) monomers.